Incomplete search results on E51

Hi there,
I got two contacts in my phone. Both are stored on the memory card, both are of type "private", both have a first- and a lastname and both have one number each which is set up as the standard number for making calls and writing messages. And: Both numbers start with 0160.
When I use the search (main menu | Office | Search) and type in: 0160 only one of the is found.
The above is of course only an abstraction of my problem. The point is that the search returns an incomplete result set!
If there's an index over all data, maybe there is a possibility to reinvoke the calculation of this index...? Just an idea.
By the way,
I tried this on another E51 revealing the same malfunction...
Thanks for your help,
FinchFinch.

You'll find some of the answers in this topic....
http://discussions.apple.com/thread.jspa?threadID=1184438&tstart=0
I don't know about how masking effects the Google search engine but, judging by the posts on this forum, it does pose a problem.
To start you can go to...
http://www.google.com/addurl/?continue=/addurl
... and submit your URL.
Then got to....
http://www.google.com/support/webmasters/bin/answer.py?answer=35658&query=html+f ile&topic=&type=
.. to get the verification file to upload to your site.
After you have done this you will log in to your Google dashboard and click "verify".
If your site is verified then it means that Google is getting through. If not, then you have to look at your domain name arrangement.
You'll see from the topic I mentioned above that you have to create your own sitemap, upload it and then go to your Google dashboard to add and verify it.

Similar Messages

Why are my search results for mail incomplete?

Why is it that when I search for emails that I KNOW are in my inbox I cannot find them? This never used to be a problem until I upgraded to Lion. My inbox has close to 7000 emails so it is not practical to manually search through it for an email that is several months old. Why are the search results incomplete? I find this extremely frustrating.

Had the same problem- called applecare, a mail supervisor walked me through the easy fix-
(I am no tech so this is in simple terms)
(Assuming you just upgraded to lion) - the "library" was not "properly rebuilt" - the emails are there but are not fully queriable which is why the "recent" or "post upgrade" emails search properly while the "older" or "pre upgrade" ones don't- the library index needs to be rebuilt (which is much easier than it sounds)
Steps
1- Quit Email (fully)
2- open finder, open "Go"
    Hold the "Option" key on your keyboard - this will expand the menu to show the "Library"
3- Select the "Library" option, (you can now release the "Option" key).
4- Open the following folders (Mail,   V2   , Maildata)
5- Within the Maildata folder there are (3) files which need to be deleted (Trashcan them)
     (envelopeindex, envelopeindex-shm, envelopeindex-wal)
6- Reopen Mail / (This will automatically reimport these files, takes some time depending on how many emails)
7- Quit mail and Reopen (has to reload for some reason)
8- The mail program will do some automatic sycronizing (You will see some the files "Reappear / fill in" while Syncronizing
9- about 100 (blank or garage or remant emails) loaded to the top of my inbox during this process but everything else was normal-
Everything now works great

Incomplete Finder search results in Mavericks

Hi guys. It appears search results in Finder in Mavericks are incomplete.
I am used to delete preference files left behind after I trash an app -like .plist files located in home folder/library/preferences -they are showed no more in search results. Obviously finder search criteria are customized to show system and hidden files.
It looks like a bug. Can you reproduce same issue?

Back up all data.
In Contacts, select
File ▹ Export ▹ Contacts Archive
from the menu bar, and save the archive to your Desktop.
If you use iCloud, disable contact synchronization in the iCloud preference pane. When prompted, click Delete From Mac. Re-enable synchronization. Wait for the contacts to re-synchronize, then test.
If you don't use iCloud, or if the contacts fail to synchronize, delete all contacts, then select
File ▹ Import…
and import the archive you created. It may take a few seconds for the contacts to be indexed. Test.
If you don't like the results of this procedure, quit the application. In the Finder, select
Go ▹ Go to Folder
from the menu bar, copy the text on the line below into the box that opens, and press return:
~/Library/Application Support/AddressBook
Restore the folder that opens from the backup you made before you started.

Finder search results show MP3s with incomplete or changed filenames in Yosemite

Under Yosemite, when performing a search for "mp3" in Finder, certain search results will not display their true filename under the "Name" column:
For example, the "Name" column above should display the entire filename (as shown in the Status Bar), not just what I can only assume is the track title.
This does not apply to all mp3s, only to some. Probably something to do with ID3 tags, or perhaps with certain hyphen usage in the filename.
Anyway, I'd just like the "Name" column to show me the filename as it should, and not metadata. I can't find how to change the results to display the correct filenames.
This causes several problems. First it makes sorting by an album's track number, which is frequently included in the actual filename, in the search results impossible, as now the numbers are not part of the list. Therefore if I want to drag an album into an iTunes Playlist in the correct album order I have to go to the source folder and can't do it straight from the search window. Also I can't see separate versions of the same song, which may have the same track title but different filenames. Also I can't see the filename at a glance, which may include other important information other than the track title. And so on.
I can't find anyone else who has this problem on Yosemite. Mavericks yes... and sadly no help. Hoping it's fixable.

I have the same problem with AIFF's too...
It's a big problem for me as I'm currently doing some sound design.
I need to see the file name in the finder, not the title/track name.

Clicking on a search result opens up an empty tab

Hi there,
I have Thunderbird installed on Ubuntu 14.04 LTS.
When I search for an old email, I enter a search term into the search bar and hit ENTER.
I can then see various relevant search results.
When I click on certain results the tab that opens up is empty and simply has a divider in between.

Help menu > troubleshooting information.
Click the button to open the profile folder.
Close Thunderbird
Delete the file "global-messaage-db.sqlite"
Restart Thunderbird.
Note all searches will return nothing or incomplete results until the index file is fully regenerated.

Error while adding a 'Ext No' field to Activities Search Result List on UI

Hi Experts,
The requirement is to add a new display field u2018External Nou2019to the activities SEARCH Result list.
At the moment activities are displayed with start date, end date and category, now the user want to display External No as well.
The details for that
Target:
Component:BT126S_APPT
View:bt126s_Appt/ApptSR
Context Node:BTQRACT
New attribute 'EXTERN_ACT_ID' to be added to the context node.
Source: component: BT125H_TASK
View: BT125H_TASK/TaskDetailsOV
ContextNode:BTACTIVITYH
Attribute:Struct.Extern_Act_Id
BOL Relation:
BOL ENTITY: BTQRAct
BOL Attribute: BTADVSAct -> BTOrderHeader -> BTHeaderActivityExt/EXTERN_ACT_ID
When i tried to added the attribute to the context node BTQRACT, it gave me the error 'method CL_BT126S_A_APPTSR_CTXT CREATE_BTQRACT DOES NOT EXIST.
please give me some inputs.
Regards
Krishna

Hi steve,
Still my issue was not resolved, could you help me to find the exact error.I have enhanced the component, view and context node, still i couldn't able to add attributes to the context node BTQRACT.I tried to add several fields, but it is giving the same error 'METHOD CL_BT126S_A_APPTSR_CTXT' CREATE_BTQRACT DOES NOT EXIST'. I have checked the OSS messages and found 2 relavant to this component. I have implemented both the Sap Notes 1363752, 1226612. Still after implementing the OSS note, i am getting the same error.My guess is one of the method is missing. Please help me out?
Regards
Krishna

Podcast No Longer Showing Up on iTunes Search Results

We submitted our podcast months ago and it showed up on the iTunes store just fine. Somewhere along the way, someone on our end introduced a code error in the .xml file that broke the links to the audio files. We didn't find this issue out for quite a while, and in that time, it appears that iTunes flagged and took down our podcast feed from the store (I'm assuming because of this code error).
I have since remedied the code issues and I can subscribe directly to the feed now, so it is working fine. But I cannot get the store to show the podcast in any search results. When I try to resubmit the feed the store says it is already submitted - even if I change the url and the .xml file name, so it is clearly smarter than I am, haha.
Any tips on how to get out of this problem? It has been several weeks and the podcast still does not show up on the store.
Thanks,
Bill

Roger,
Thanks for the reply - in the time it took me to hit submit and tab back to my .xml file I saw that I'd missed changing the link/title. Thank you for confirming that this will do it - it let me resubmit. Take care!
Bill

Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughier

Dear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier

Why do google search results reset to match the search bar terms when i use the back button?

Since the update to FF 23, the list of Google search results clears and the on-page search box is reset to match the address bar search box when I hit the back button to re-view the results list after checking a result.
To see this issue for yourself, set your search provider to Google and make sure Instant is on. Type a search term into the search bar and press enter. A google page appears with your results list. Now, change your search terms or conduct a new search directly from the google page (without using the FF search bar). Click on the first result in the search list, then click the back button to return to the search results so you can check a differest result. As FF goes back to the google page, it will reset the on-page search box to match the FF search bar (although you were no longer on this search) and all search results will disappear, replaced by the message "Press enter to search". Pressing enter reconducts your old search, not the one you were on.
This is incredibly maddening since searching for something requires frequent use of the back button to check through the list of search results, and then frequently trying the search again with slightly different terms. Although it sounds like a Google issue, it did not occur on the old firefox and has me wanting to revert. I tried to revert to the old search function via the "keyword search" addon, but this did not fix my issue. Is there a way to force FF to go back to the actual google search page I was just on instead of conducting a new google search from the FF search box when I hit the back button?

In Firefox 23 versions and later the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar via the keyword.URL pref.<br />
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.<br />
Current Firefox versions do not update the about:home home page until you refresh the page (future versions will do this automatically without a refresh) and that is what happens if you use the Back key.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/

Web page different from opening link in a new tab or new window from Google search results

I had been using another browser for a few months because I did not want to lose the web pages I opened within Mozilla. I began using Mozilla again after saving off the web pages. I see that Google's web page pulls in search results as I type in keywords, a feature I don't remember seeing with other browsers along with a magnifying glass icon, like a look ahead of what a web page looks like before clicking on the link.
With the list of search results, I click on the link and tell Mozilla to open the link in a new tab. I see the google icon, "loading..." or "testing...", then results other than the link I wanted. Those other results maybe bing.com, http://66.45.255.230/click.php?c=0920f96609cb269f1d0045095c09, http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X, Info.com, Supermedia Reverse Proxy (http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X)or whatever else. As for the link, I managed to press stop before being redirected.
This is with any search results listed.
I thought it was Google.
Changed to Instant is off.
Nope. Still the same issue. Have already gone after malware. Tried resetting the redirect value to 0.
Above results also occur when opening the link in a new page via right menu click.
Copying link location and pasting in a new window is displaying results okay.
When resuming use of Mozilla, an update was available and installed. Did not experience the above issues before the update.
Running version 3.6.12. Running Win XP Pro SP3.
Had to go back to IE and Chrome/SRWare Iron.
Example:
Google keywords: rental cars
Clicked on Ad: _Avis_Rent_a_Car_, link is Avis.com
Clicked on top search result: Hertz_Rent-a-Car_-_Rental_Car_Discounts,_Coupons,_and_Great_Rates (magnifying glass), www.hertz.com

Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

How to change search result list entries?

Hi together,
I'd like to fit the TREX search result list to my own requirements. I've edit the Search Result Renderer Settings, Search Result Layout Set, Search Component Set and the Search Option Set. But that's not enough.
1.) I would like to display the relevant index name, in which the document was found.
2.) For special indexes (not for all!) I want to change the content link:
For example: if TREX is finding an xml-File in index "abc_index" I would like to change the content link from
"https://portalserver/irj/go/km/docs/folder/p76.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
and from
"https://portalserver/irj/go/km/docs/folder/p76_data.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
3.) I'd like to display a special part of the document as a explanatory text in the result list.
I think point 1 and 3 are possible with properties and HTML-extractors. But point 2 I'm afraid I have to create my own component.
But how to manage this? I cannot find any code snippets or tutorials or pattern to copy and develop further.
Is it possible or advised to write a WebDynpro? Are there other possibilities? I don't know how to start.
I would be pretty delighted to get any idea...
Thanks a lot
Steffi

Hi Stefanie
1) If you want to be able to show the name instead, you should write your own property renderer. Heres the link for the documentation: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c739e546-0701-0010-53a9-a370e39a5a20 -> How to Implement Flexible UI
Components -> Property Renderer
2) Documentation will be send in a matter of minutes.
3) I also think the web property extractors only work with the web repository manager, because as far as I know that is the only repository manager, where you can select a web property extractor upon creation. I guess you could open an OSS to SAP and ask if its not possible to extract properties in your scenario just to be sure if its not possible. But my guess is that you either have to develop your own repository manager or publish your files on a web server in order to meet your requirements.
Best regards,
Martin

If Condition in Keyword Query Language (SharePoint 2013 Search Results)

Hi All,
Can we have an "If" condition in Query text box in SharePoint 2013 Search results page. For example, i want to hide all list items whose
status is "HideItem" from appearing in search results?
I am trying this: {?{searchTerms} (contentclass:STS_ListItem -ListItemStatus:"HideItem")}
But, this hides all items like aspx pages, pdf's, docs and displays only list items.
Similarly, hide pages of some name like: AllItems.aspx, ViewDetails.aspx, AllAssets.aspx
{?{searchTerms} (contentclass:STS_ListItem_850 -filename:"AllItems.aspx")}
Any help would be great. Thanks in advance.

Thanks Steve. I found this solution after a bit of struggle :).
Also, date comparision is not working as expected.
{?{searchTerms} NOT(contentclass:STS_ListItem AND ListItemStatus:"HideItem" AND
PublishDate<{Today})} is not working and throwing syntax error.
I don't see any solid reference to KQL syntax except this msdn link.
Can you please suggest any good material on KQL syntax ?
Thank you once again.

How to sort web app items based on few fields of it on search result page?

I have a web app and its search. The search results are on multiple pages means it has pagination. My client's requirement is to have a feature which will sort results based on some web app items. for example we have a field price so when user select the price it needs to sort from high to low. Any one have idea how to do it?

I have just been playing around with this for something else, all you need to do is duplicate your price field into the weighting field and it will automatically sort from High to low for you.
Cheers
Duncan

How to exclude Web App from search results

Hi
Search results link to a unstyled Web App instead to the actual page it resides in.
Please do this:
1. go to: http://kinship.businesscatalyst.com/
2. search for "Michael" on the top global search
3. on the search results page click on the name (link).
4. you will see Michael's web app item not the actuall page it resides in (http://kinship.businesscatalyst.com/About/the-team)
How to avoid getting web app results in search?
Thanks
Micha

Hi Micha
Just add “&OT=35 “ at the end of the action in your search form:
Ex:
<form name=”xxxx” method=”post” action=”/Default.aspx?SiteSearchID=3566&ID=/results&OT=35”>
<div class=”search-box”><input type=”text” class= ............../>
<input type=”submit” class=”cat_button” value=”search” />
</div>
</form>
Here are the rest of the content types IDs, should you come across similar situations in the future:
Web Pages = 1
Literature = 6
Announcements = 7
FAQs = 9
Forums = 43
Blogs = 55
Web Apps = 35
Catalogs = 26
Bookings = 48
You can exclude multiple areas from a search, simply list them with commas: &OT=35,1,6

Displaying the count of search result?

Hi,
We have built new search pages for our client to search for candidates registering in their iRecruitment site. The client prefers to see the no of records of each search result. Typically some searches may fetch around 50000 records.
How to achieve this. Currently we have set the VO_MAX_FETCH_SIZE for one responsibility as 50000. I think this will have a performance impact and it cannot display the exact count if it is > 50000. Is there any other way just to show the count of search records?
thanks,
Hem

Henry,
As Ram insisted before that if no. of records in your VO is more than max fetch size set in profile option, then it won't return excat number of records.You can very well use this method in normal flow, if you expect that your VO query will not return more than max fetch size records.
Otherwise run a separate query to get total, as discussed.
--Mukul

Incomplete search results on E51

Similar Messages

Maybe you are looking for