Inconsistency with maintenance cycle and task list phases in ChaRM

Hi Experts,
I'm deploying ChaRM with SolMan 4.0 SP09.
I was testing a scenario where there are more than one maintenance project open for same landscape (different logical components but values are the same). I have been using maintenance cycle document (in crmd_order) to control phase changes both in task list and in maintenance cycle.
I received an error message stating that the system has reset the status of the maintenance cycle and the end result was that task list phase is one step ahead of the maintenance cycle. This of course causes the situation where certain actions are no longer possible (maintenance cycle in Dev with release but task list already in test => release and import are not possible and reseting phase with task list is prevented by ChaRM).
My question is how do I restore the inconsistency. I have looked for notes (but of course this is not a notes issue) and the internet for solution.
I am very greatful for any hints you may give me!
Kind regards,
Auli

Thank you!
Exactly what I'm trying to do. I'll give it a go and get back to you asap.
BR
Auli

Similar Messages

Table for maintenance plan and maintenance cycle and Unit

Hello,
I need to know the table where the values are stored for maintenance plan, maintenance cycle and Unit.
I know that we can get the maintenance cycle and unit from MMPT table.
Question 1
If the maintenance plan has only a single cycle then the data is stored in above table MMPT, but if a maintenance plan has mutiple cycles like 1 maintenance plan has maintenance cycle as 364 Days and 1092 days then the data is not stored in MMPt table.
Question 2
Requirement is I need to develop a report where in I need maintenance order, maintenance plan and the relevant maintenance cycle and unit. Supose an maintenance order is created for the above maintenance plan which has 2 maintenance cycle how can I identify for which maintenance cycle the order is created.
Regards,
Narendra

Hi,
Please review PM tables
PM/SM/SD Tables
MPOS                       Maintenance Items
AFAB     Network - Relationships
PLKO     Task list
PLAS
AFFH     Operations
PRT assignment data for the work order
AFFL     Work order sequence
AFFT     Order process instructions
AFFV     Order process instruction values
AFFW     Goods movements with errors from confirmations
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFRC     Table of planned changes to conf.: Automatic goods receipt
AFRD     Default values for collective confirmation
AFRH     Header information for confirmation pool
AFRU     Order completion confirmations
AFRV     Pool of confirmations
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
MPOS     Maintenance ITEM
AFWI     Subsequently posted goods movements for confirmations
AUFK     Order master data
AUFM     Goods movement for order
MPLA     Maintenance Plans
BGMK     Master warranty header
BGMP     Master warranty item
BGMS     Text item master warranty
BGMT     Master warranty text
BGMZ     Warranty counter information
CRHD     Work Center Header
CRTX     Text for the Work Center or Production Resource/Tool
EQKT     Equipment short texts
EQST     Equipment link to BOM
EQUI     Equipment master data
EQUZ     Equipment time segment
HIKO     Order master data history
IFLO     Functional Location (View)
IFLOT     Functional location (TABLE)
IFLOTX     Functional location: Short texts
IHGNS     Plant maintenance permit segment
IHPA     Plant Maintenance: Partners
IHSG     Object-related permits in Plant Maintenance
ILOA     PM object location and account assignment
IMPTT     Measuring point (table)
IMRG     Measurement document
KAKO     Capacity Header Segment
KONP     Conditions (Item)
KONV     Conditions (Procedure Data)
OBJK     Plant Maintenance Object List
QMEL     Quality notification
QMFE     Quality notification - items
QMIH     Quality message - maintenance data excerpt
QMMA     Quality notification - activities
QMSM     Notification - Tasks
QMUR     Quality notification - causes
STPOA     Name is does not have an A at the end; BOM items
T001     Company Codes
T001L     Storage Locations
T001W     Plants
T077D     Customer account groups
T003O     Order Types
T352R     Maintenance revisions
T353I_T     Maintenance activity type description
T356     Priorities
T357G     Permits
T357G_T     Table 357G texts
T370A     Activity category for PM lists
TINCT     Customers: Incoterms: Texts
TVKO     Organizational Unit: Sales Organizations
TVKOS     Organizational Unit: Divisions per Sales Organization
TVKOV     Org. Unit: Distribution Channels per Sales Organization
TVTA     Organizational Unit: Sales Area(s)
VIAUFKST     Order selection view
MMPT Cycle detail
Regards
Carlos

Week view and task list solutions? Solved: a way to sync notes to Mac.

I've been using a Palm Tungsten T5 for years and routinely rely on the Palm's Calendar week view feature and task list. The week view is indispensable to see where I can fit in appointments. Are there any ways to achieve the same functionalities on the iPhone, whether using built-in iPhone apps or third party apps? The task list would have to include item priorities, due dates, alarms, and ideally repeating events.
I have found a way to sync notes from the iPhone to my Mac using MarkSpace's The Missing Sync for iPhone; notes are synced to the MarkSpace "notebook" application, where you can edit the notes (and copy and paste) and sync them back to the iPhone. This doesn't sync notes with any Apple applications, though.
If I could solve the week view and task list omissions, I could see my way to replace my Palm with an iPhone. (And when ePocrates releases a full suite for the iPhone, I'll be all set.) But in the absence of these, I'll have to keep using a Palm.

I'm in the same boat, unfortunately.
As a life long Palm-User the PIM-functionalities of iCal can only be described as "rudimentary". It is nowhere near DateBk6 for example. And I would be just fine if it would come close to say 50% of it's functionality. Right now it's at about 25%.
- no repeating tasks?
- no tasks+calendar in one view?
- no week view?
- no icons for event/task categories?
Come on Apple, such a great device with the amazing screen resolution, horizontal view etc. and you are not taking opportunity of it and get beat by 10 year old PDA's?

Problem with numbering of general task lists by creation thru LSMW - (IA05)

I'm using a sequencial file to create general task list thru LSMW (Object 0490 which corresponds to TCode IA05).
The numbering range for general task list groups is internal. I executed batch input and it works pretty well with the first general task list group, but every next fails, because the number of the previousy created task list stays in the user buffer and apears in the PLNNR field, so the system assumes I'm trying to create a new group counter instead of new general task list group.
I explicitely set IBIPTLST-PLNNR = '' in field mapping - still the same problem. I also set user parameter PLN to be empty in SU3 and still no luck. I even turned off the historic data in local data tab of SAPGui, but the problem persist.
Can anyone tell me how can I achieve it without changing the numbering range to external?

Hi,
From IBIP Help:
Initial fields
As a general rule, initial fields in structures are not transported into the corresponding screen field. In other words, fields that are blank are ignored. If you explicitly want to reset a field to the value "<blank>", you must mark the field in the batch input structure with the value !. This is the reset indicator, and means that a field is to be reset to its initial value.
Try setting IBIPTLST-PLNNR to !
-Paul

Palm Treopro--Sync multiple calendars and task lists

I have more than one calendar and task list that I use in Outlook. Is there a way to sync multiple calendars and task lists on the Palm Pro?
Thanks,
Al
Post relates to: Treo Pro T850 (Sprint)

I just upgraded to Pre 2 a couple weeks ago and have been experiencing similar problems with my Verizon model and a replacement. Apparently it is widespread; there is a lengthy (11 pages so far) thread on it in this Community forum. Try http://palm.lithium.com/t5/Synergy-webOS/strange-behavior-syncing-Pre2-Calendar-with-Google-Calendar... or Google the phrase "strange behavior syncing Pre 2 Google" (look for a search response that references "11 pages" or you'll miss some of the more recent posts). Not sure there are any good answers at the moment. Very disappointing if so; the Google/Pre sync worked flawlessly on my Pre Plus for the past 15 months (webOS v.1.4.5)

No profile with entry tool for task list QP01

Hi all,
I am trying to upload Inspection Plan through LSMW. When I reach the Create batch Input step, I encounter an error saying No profile with entry tool for task list Q 141 2 in session 5_INSP_PLAN. How do I fix this?
Please help

Solution is to check on config for Inspection Planning for QM.
SPRO > QM > Quality Planning > Inspection Planning > Maintain Profile for Default Values (OQ84)
Entry tool must be checked and Profile field in LSMW must correspond with Inspection Plan Profile

Functional Location and Task List FM

Hi
Can you please suggest me Function module for Functional Location(TPLNR) and Task List(PLNTY)
Thank you in advance

I need to creat a BOM and FL report, in which user gives input through selection screen and gets some out put in ALV.
as there are many fields and tables therefore I would like to use FM instead of writing SELECT queries to fetch data to overcome performance issue.
I have already found CS_BOM_EXPL_EQU_V2 using which I can fetch something around 14 fields out of total 45 field which I need to fetch.
The rest fields are related to Functional Location and Task List , therefore I need to find out some relevant FM to fetch those fields.
If you can even suggest me some useful Function Group also, I can search the FMs in it.
Thanks in advance
Saeid

Equipment and task list relationship in PM module

Hi Freinds,
We have craeted 'Equipmentin t-code 'IE01' and task list for that equipment in t-code 'IA01'.
The equipment created is stored in table 'EQUI' and the task list is stored in table 'PLPO' and 'PLKO'.
But in all these tables im not able to find relationship between the equipment - EQUNR and the task list 'PLNNR'. In which table can i find the relationship between EQUNR and PLNNR. This is respect to PM module.
Thanx
RR

Hi Rajiv,
try table EAPL which holds link between Equipment No (EQUNR) and task List(PLNNR).
<REMOVED BY MODERATOR>
Regards,
Rahul
Edited by: Alvaro Tejada Galindo on Apr 25, 2008 5:16 PM

Equipment and task list in PM module

Hi Freinds,
When we create 'equipment' and 'task list' for it in PM module, in which table does this get stored.
Thanx
RR

Hi,
Use the tables PLKO and PLPO for task lists.
Regards,
Satish

Current/Future Support for Exchange Folders and Task List Items

Are there any plans for SES to be able to index public Exchange folders and task list items?
Does anyone know or is aware of any workarounds for indexing public folders and task lists?
Thanks in advance.

Are there any plans for SES to be able to index public Exchange folders and task list items?
Does anyone know or is aware of any workarounds for indexing public folders and task lists?
Thanks in advance.

Email: Workflow and Task List Notification

Hi,
I am wondering whether the setting 'Workflow and Task List Notification' in application settings is functionality that I can use: I would like to setup the e-mail notifications for planning. One of the tasks on a standard task list that we would like end users to be able to do is to inform a particular user/group that a particular task has been completed. I would not like this task to be a workflow task, can e-mail notifications be sent for standard task list items?
Options that I have reviewed:
- Custom button on a dataform - not sure whether I can send parameters through to this, however I could use the form name as a description.
- A *.jsp page that accepts two parameters 'Description / form name' and 'e-mail address' and the page then sends off an e-mail (Lotus Notes from WebLogic 9)
- Workflow - although this inform task is not entity driven. Also the notifications are across plan types i.e. one cube enters in Information and then informs users of the second cube that figures are required - which we then import using xref.
Any advice would be much appreciated. I know it can be done, I am just looking for the easiest way to implement this using standard planning functionality where possible.
Kind Regards,
FC
Edited by: user11212320 on Sep 21, 2010 10:32 AM
Edited by: user11212320 on Sep 21, 2010 10:36 AM

The default email solutions in planning are using workflow or task lists, though the task lists are based on due dates.
If you wanted a solution where an email is sent out when a task list is complete, then one route could be to have a business rule attached to a task list and then the business rule uses a custom CDF to send out email notication.
If you are interested in sending emails from business rules then I did write a blog on the subject a while back.
Cheers
John
http://john-goodwin.blogspot.com/

Error with "Sync calendar and tasks" - Nokia 6500c

I'm having trouble with "Sync calendar and tasks" - all other sync is fine.
It all worked OK with PC Suite beforehand.
I've auto upgraded to Ovi on last connection.
Can anyone help?
Error message when trying to sync is:
"Not enough space in device
First remove some files from your device and then sync again.
8393f01e"
Phone status:
Device memory - 910MB of 940MB fee
Phone version:
Nokia 6500c
V 09.48
26-01-09
RM-265
Ovi version:
Nokia Ovi Suite 2.0.1.35
Nokia PC Suite 7.1.40.1
Nokia Music 1.3.20722.1
PC Connectivity Solution 9.44.0.3
Connectivity Cable Driver 7.1.22.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.35.0
Nokia Platform 2.5.195
Ovi Desktop Sync Engine 1.0.0.684
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 6.0.2900.5512
- Mozilla Firefox 3.5.5
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 5512)
- Toshiba (Version v4.00.22(D))
Thanks.
Cheers,
Jason.

Hi,
Really **bleep** off with this issue in synchronizing , I move back to my old PC suite that worked fine .
I expect our NOKIA provider to be back on their code and solve this issue.
At least, one mail to me warning me of corrections with this issue and improved performances would not be considered by me as spam but as consideration to users .
Sorry dear developpers but either your specs were uncomplete, at least performance criterias were undefined and you businees acceptance test were unproperly managed. I would not like to be the project manager in charge of ! Just before Christmas, providing such a release will make Santa Klaus quite unhappy top him .
BR

Integration between Custom list and task list

Is it advisable to provide solutions for the integration between custom list and tasks list in SharePoint?
I am working on a scenario where the data has to be segregated between multiple lists and there will be transactions among these lists using workflow. Some of the capabilities in Tasks list like due date notifications, calendar, tracking are needed
on the transaction. Since these lists are based out of different content types, is it advisable to choose these lists for solutions?
When we have to make few updates through workflow from custom list to tasks, will there be any problem in the transactions as it is two different content type?
Vijayaragavan, MCTS

Since SPLists and SharePoint workflows don't provide inherent
support for transactions, you have to handle rollback operations yourself.
The easiest way to simulate a transaction is to read in the state of any list item you are changing prior to executing an update, and then write that state back should you detect a failure. It's not a perfect solution, since a sufficiently severe error might
prevent your rollback updates as well. That's the price you pay for not having the data store support transactions.
That being said, while it's true many clients will ask for business critical data to be stored in SPLists, I would argue that it's your job to convince them that it's not a good idea, and that transactional databases accessed over webservices are a much safer
SP compatible way to store important data - from
stackoverflow
[custom.development]

Plant Maintenance - Linkage between Task List and Maintenance Plan

Sir,
In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
How to create Maintenance Plan for the above scenario?.
Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
I need some help in this regard. A detailed reply will be helpful.
Can anyone throw some light in this regard.
Regards,
R. Vijayakumar

you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

Plant Maintenance - Doubts in Task List Creation

Hai,
This is the first time that I am doing some configuration regaring Plant Maintenance Module.
Scenario:
There is an equipment which has a Plan for maintenance. Support there are 8 maintenance activities which have to be carried for that equipment in an year. Each of this activity will be carried out in different periods. Some of them will have to be done once in a year. Some may be done once in 6 months.
But all the acitivities will not be carried out at the same time.
Can anyone tell me how this can done?. Should we create separate Task Lists for all the 8 activities and subseqently create a Maintenance Plan for each of them or Create one single Task List which has all the 8 activities by giving Operation nos. In th second case how to create Maintenance Plan for each of the individual Line item in a Task List and how can it be linked.
In the first case can a single Task list be incremented by a Group Counter which can have the individual operation so that a Maintenance Plan can be created for individual Task List incremented by a Group Counter.
In both the cases can someone give me the procedure.
Please throw some light on this subject.
Regards,
R. Vijayakumar

Dear Vijaykumar,
Jus follow the below steps..
Step-1
T-code IP11, Create maintenance Startegy with all required frequencies like 1, 2 3 4 u2026 12 months
Step-2
In T-Code IA01, On general header view screen .Enter the datas like Work center, usage, status. Select ur required Maintenance Strategy which u already created.
GO to operation tab , enter ur list of operations one by one (all 8 operations).
Select all operations and click Mntpack icon on bottom of screen , On package overview screen u can able to select different operation at different frequencies jus tick box and save
Step-3
In T-Code IP42, select the maint strategy which u have assigned already and fill required details and select Task list which u have created in previous step (link is available in bottom screen) & Save.
Step-4
In T-Code IP10, schedule the Maintenance Plan
Now you will get the Maintenance orders automaticaly based on package u defined and schedule date.
Revert back me in case if u have any doubt on this cycle. Else close this thread.
Regards,
Gunak

Inconsistency with maintenance cycle and task list phases in ChaRM

Similar Messages

Maybe you are looking for