Incorrect changes to Display rules

Hello,
I changed the display rules incorrect. but now i cannot enter the portal anymore. is there anybody who can help me and tell me where i can change the display rules.
Many thanks in advance
Kurt

I solved my problem, and I hope this will work for you as well.
I went directly to the URL for the Desktop & Display Editor and fixed the rules. Here's the Direct URL:
http://<hostname>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.themes/com.sap.portal.portalDisplayRules&iview_mode=default
Good Luck.

Similar Messages

  • Is it possible to change the display value of a domain-based attribute?

    Hello,
    I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity.  However, I cannot find a way to display anything but the code value in the drop-down (see below).
    Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
    Thanks in advance!
    Ben Lezin

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • Enable/select/change to Business rules from Calc Manager in App settings

    Hi all,
    Somehow we are Unable to Expand the Planning Node in Essbase Administration Services (EAS) Console When Creating Business Rules. I am not sure is it
    I am not sure, is it because of one of the application has calc settings as calc manager in under application settings in dev environment, but in other environment all applications set it as Business Rules.
    I was trying to change from Calc Manager to Business rules in App settings, but it is grayed out and not able to change to Business rule from calc manager.
    Please suggest me.
    Thanks,

    If it say been set incorrectly then you may need to update one of the relational tables for the application.
    Table - HSP_SYSTEMCFG
    Field - CALC_ENGINE_OPTIONS
    Values - 1=HBR, 2=CalcMgr
    Restart the planning application web app service after making changes.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How do I change my display name?

    Please walk me through changing my display name.

    Glad to ... please note, I am a Win7 PC, so if you use any other operating system or device, what I am about to descrobe here could be very different as the Skype client software works and displays differently depending upon the platform.
    At the top of the contacts list, click Skype -> Profile -> Edit your profile -> click your mouse over the name which appears beside your picture or at the top of this screen.  Delete the text and type what you wish to appear - please note, this will appear both in your public profile and to your contacts.  When you are finished editing the text, click the check mark beside the box.
    Just above your name and above your picture or avatar, you may click on the Public profile or Contacts only buttons to review what will be seen either publicly or to your contacts only.  Clicking the Edit button will take you back into the screen where you can make changes to your settings.
    You will see at the end of several lines the words "private," "contacts only," or "public" in grey type.  These are default settings where this information can be viewed and which said default setting can not be changed.  If there is a drop-down box with a choice, you can decide where that information is displayed depending upon what the options are in that drop-down box.
    Done!
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Display Rules

    Hi,
    Our portal platform is NW04 Stack 11.
    I am a super_admin and I am trying to assign a desktop to my username. When I do this the desktop does not change. It stays on the default one. I even tried creating my own display rule and adding that to the main_rule but it did not work. I can successfully assign this desktop to users other than super_admin and myself. Is there some caching issue somewhere or something else I need to check?
    Thanks,
    Kris

    Hi Kris,
    It may be a caching issue, but seeing your Main Rule Collection will help to be sure.
    A common mistake is to change a line in the rule without clicking "Apply" (Happens to the best of us ), so you might want to make sure by trying again.
    Yoav.

  • Changing Portal Display

    I am trying to customize the standard portal desktop. I need to make some changes in the portal masthead like changing the logo, branding image etc. As we don't have NWDS installed I am trying to do it through Theme Editor.
    I followed the below process:
    1. Created new Portal theme, In that uploaded a new logo and branding image and saved it.
    2. Created a new desktop image and added the theme and a copy of the default frame work page to it.
    3. Created a display rule and assigned the desktop to it.
    After following the above process , I am still seeing the standard portal theme.Do I have to do anything else besides the above process?Can someone help me with this.
    Thanks.

    Hi p576277,
    The process steps you have followed are correct.
    As Praveen said the simple mistake everyone does(even I did the first time ) was adding the IF statement after the defaultDesktop IF Statement.
    IF User = *  should be given after the custom IF statement for your desktop.
    The problem is .. If the Statement USER=* appears then It wont process anyother IF statements . Hence All Custom IF statements should appear before the default if Statement. Click the IF statement and use the MOVE UP and MOVE DOWN buttons for moving the IF Statments.
    Atlast..your expression should appear like:
    IF User = <youruser>
          Then Portal Desktop = CustomDesktop
    IF User = *
          Then Portal Desktop = DefaultDesktop
    Award points if helpful.
    Thanks,
    Ratan

  • New document - changing the displayed unit in width/height?

    Hi all,
    Sorry for this basics question relating to InDesign CS5...
    When creating a new document, with a custom size, the default size is showing as XXp00 - I don't know what the 'p' means nor it's relation to other units such as cm or mm.
    Is there a way for the default to be cm, or mm?

    XXpYY is the established convention for displaying picas (6th of an inch) and points (12th of a pica). 3p0 is 3 picas,0 points, or half an inch. 13p6 is 13 picas, 6 point, or 2.25 inches.
    You can type any units you like in any dialogue or panel and InDesign will handle the conversion to the currently displayed units. If you want a page 14 inches wide, just type 14" and InDesign will accept that and display it as 84p0.
    You cannot change the default units while a modal dialogue (like New Document) is open. You can change the default units in Preferences. You can also change the displayed units in the current document by right-clicking on the ruler. Each ruler remembers its own units, so either change the units for both rulers or right-click on the intersection of the rulers at the top left of the window.

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How to change external display resolution WITHOUT clicking "CONFIRM"?

    I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
    This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the  3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
    The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
    The workarounds I've used so far are:
    - Mirror displays (not ideal, as I need the presenter preview of the next slide)
    - borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
    I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
    Thanks.

    Fateh wrote:
    I hope that my question is clear ... Nope.
    How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
    What do you mean by "the display resolution of APEX"?
    In other word, if an end user sees large elements on a pageWhat "large elements"?
    then he/she zooms it outHow?
    "Zooms" what&mdash;the entire page or a single "large element"?
    How can I set a proper ZOOM for my app by default ...Meaning what?
    And as usual, we're missing:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
    If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • I have three email accounts and want to know how to change the display order.

    I have three email accounts and want to know how to change the display order.

    Install this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

  • Change the display of the multiple Table items using a single Drop-down

    I have created a Web Template in BEx WAD (BW 3.5) with 4 Tables assigned to 4 dfferent Queries. Now I want to change the display of the all the Four Tables based on the selection of display properties chosen in a single Dropdown item. The properties to be selected  in the dropdown are like changing the Alternate style display of Rows, Suppress Alternate Style, Display only 30 Rows or 60 Rows.
    Please help me in writing the script necessary to pass the command from the dropdown to all the Tables to get the desired output.
    Thanks,
    Krishna
    Edited by: Hari Krishna Velampalli on Oct 26, 2008 12:00 AM

    Dipika, Thanks for the response.
    I tried using that option but again since we cannot give custom options in a drop-down,
    I created a Form with a drop-down list of options like Suppress Result Rows, Suppress alternate style of rows, Display only 30 Rows, Display only 100 rows .. and so on.
    Now I am able to change the display of my first table by selecting the options in the drop-down list. But my intention is to apply that selection to Multiple Tables.
    How can I achieve that?
    HK

  • How to change the display name for Gmail aliases?

    I have a Gmail account with multiple aliases. They look like this:
    Joe User <[email protected]> (Primary)
    Support <[email protected]> (Alias)
    Billing <[email protected]> (Alias)
    Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
    I have to imagine I can do this. Can someone help me out?
    Regards,
    Dave

    Anyone came here, refer to this post.
    http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

  • I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

    I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
    Can anyone help me resolve this problem?

    Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

  • How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

Maybe you are looking for