Incorrect entries in Stock/requirements list
Hi,
I have the following issues:
1) The sales orders are not reflected in MD04.
I understand this is the result of SD transactions not properly updating the 'sales requirements' tables VBBE & VBBS. MRP is relying on this information.
Why SD transactions not properly updating the Sales requirements tables VBBE & VBBS?
2) The system is not reducing the sales order qty by the outbound delivered qty.
Example: Sales order qty : 100 PCu2019s
Outbound delivered qty: 50 PCu2019s
Sales order qty in MD04 should be 50 PCu2019s. But this is not so in some cases.
Why system is not reducing the sales order qty by the outbound delivered qty?
For issue 1 & 2 , The program SDRQCR21 is used to correct the entries.
3) Some times , the program gets cancelled due to ABAP runtime error : SAPSQL_ARRAY_INSERT_DUPREC .
The reason is One sales document number is entered twice in table VBBE during the program SDRQCR21 execution.
How to Correct the above issue?
Regards,
Prasad
Hi Anil,
Plz find the Karthick & Navin inputs which is very clear to understand abt Rescheduling
Let us have a final material xxxx.
It needs a material(procured) yyyy.
let the planned del.time of yyyy be 20 days.
and assume there is no stock of yyyy in the plant.
You need XXXX ,10 days later from today.
So if the requirement for xxxx is raised today , System wud raise a Pur req for yyyy.
The actual date on which yyyy can be available in the plant is 20 days from today( i.e what we call as Planned del.time). But as the requirement 10 days in advance, the system itself will reschedule the date.( for making yyyy available ready for xxxx)..
Example
Say I have a VSF requirement for 26.01.09 & Next element is Production Order with Finish date as 09.03.2009. In between this no other requirements are existing.
In above case in the Production Order line system will give the rescheduling date 26.01.09. This means i need to bring my process forward to get it completed on 26.01.09.
The conclusion is if any elements in the MD04 needs to be rescheduled to fufil the requirement then system will give the rescheduling date.
Regards
kumar
Edited by: kumar kumar on Jun 22, 2009 4:57 PM
Similar Messages
-
Stock Requirement List - MD04 - adding columns in this list
Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks -
Table for Stock Requirement List related information
Dear Sir,
We have make-to-order scenario , on receiving the Order from Customer we first create a Sale-Order for the Ordered Item . Subsequently in MD04 , we find a requirement getting reflected for the Customer Order .
For example say the Sale-Order number is S-101 and the Line Item is 10 for the FERT material say FERT-101 having the Order quantity as 1 number . In MD04 , we find a requirement getting reflected with the following information :
MRP Element --> CustOrd
MRP element data --> S-101 / 00010 / 0001
Recd/Reqd Qty --> 1-
Available Qty --> 1-
We need to write a Z program for getting the list of the requirements against the Customer Order (as shown in MD04) .
Kindly guide us as which Tables we need to refer for getting the above information pl .
We assure to award full points for the suggested solution .
Rgds
B MittalHi,
Pls use below function module, same as you will get Stock Requirement List related information
MD_STOCK_REQUIREMENTS_LIST_API
For test, goto SE37 and test it
Regards,
Sankaran -
Friends,
When we are using the t-code MD04 to generate the stock requirements list for a material, it is throwing an error "Please maintain version in table T009". Table T009 is the table for fiscal year variants. There are no versions to be maintained there. Also, the fiscal year variant that is assigned to our company code is maintained there. Further, the stock requirement list is being generated for other materials (even those marked for deletion).
Please advise on how to solve this issue.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801
Office: +91 66452730Friends,
The problem was with the material master wherein a different fiscal year variant was maintained in the MRP view (different from the one attached to the company code). Changing the material master has solved this problem.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801 -
Stock/requirement list at a particular date
MD04 gives current stock/requirement list and MD05 gives planning result of last MRP run.
Hoe to see stock/requirement of a particular dateDear Harshad,
As explained there is no standard report to meet this requirement,but stock on a posting date is possible through MB5B.
If my understanding is correct then this stock/requirements list is a dynamic one(even on a particular date) this list gets updated
for each fixed/planned- receipts/issues.So on the same day there may be number of updated list.So there cant be only one
stock/requirements list on a given particular date.
Correct me if I'm wrong.
Regards
Mangalraj.S -
"SubReq" is still available in the stock/requirements list.
Hi SAP guru's,
In the subcontracting scenario for our client, the required quantity of child component will be provided to the subcontracting vendor.
For one particular purchase order,
Subcontracting PO for parent material "A" - qty 4284
Child component "B" - qty 24,996 provided to the vendor
"SubReq" is still available in the stock/requirements list of child component referring to the closed purchase order (delivery and invoice posting completed for full quantity, no open item quantity).
What could be the reason for this issue and what is the best solution.
Thanks in advance for your valuable reply.
Reddy.Hi Csaba,
Thanks for your immediate response to my query.SubReq should not appear in MD04 w/o existing requirement (e.g. PO) as a standard but it is observed for this PO.
The OSS note "115899- Correction report for subcotractor requirements" is not giving the direct solution, but the content in this note may be useful to analyse and resolve the issue which we are trying.
Thanks & Regards,
Reddy GY. -
Printing the Collective Stock/Requirements List
Hey All,
I'm trying to print out the collective stock/requirements list via the menu path "System -> List -> Save -> Local File" but it is shaded out and i cannot do this, just like SD variants are needed to be maintained in own data for the report VA05 so that layouts can be saved, do we also need some such varient maintained in own data to access this option ?
Best Regards.Dear Danish,
After executing the Stock/Requirements List in MD04,in the top menu List -
> variable print --->From
here you can download into a spread sheet or as a local file or as a word processing.
Or else you can print from here.
Now come back with your further queries.
Dear Vivek, MDLD is to print out the MRP list (which is a static one and stock/requirements list is a
dynamic one).
Regards
Mangalraj.S -
Different Exception messages in MRP list & Stock Requirement List
Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
TomHi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek -
Hi all,
Pl go through the following issue:
There is a material B. It is a component of Material A in BOM. This material A is to be supplied by a vendor by subcontracting.
There is a subcontracting requiment for some 70,000 pieces for this material B for the past one month .But there is no pegged requirement corresponding to this requirement . So , this stray requirement , which is available in stock requirements list of Material B is to be eliminated.
Can you pl suggest some solution?
Those who can give a probable solution shall be awarded points immediately.
Edited by: venkateswara rao on Aug 21, 2008 7:52 AM
Edited by: venkateswara rao on Aug 21, 2008 7:53 AMI have gone through the OSS notes and understood that it is a programme error . Hence the inconsistency.
-
Stock requirements list for special stock E
Hello Experts,
Is it possible to view sales order stock along with the sales order and the linked PO in Stock requirements list? If so, would it need configuration changes?
Any input would be rewarded with points.
Thanks,
RajRaj,
Of course. That is the standard display in MD04 for Make To Order (special stock E). You can't make it display any other way.
Regards,
DB49 -
Question about consignment pick-up and stock requirement list
Hello,
why consignment pick-up order is not taking into account as a supply in the stock requirement list?
Thank you,
Gunadihi
if you check the the item category KAN for consign pick up at VOV7, you can find out it is a return from the consignment process.
so when the materials are coming in to ur plant, it is not a supply. it is your own material coming back to your stock.
once you do the sales order and PGR( post goods receipt) you can see in MMBE your stock level increases.
hope it is uuseful to u.
suresh -
I can't see planned order in Long Term Planning Stock/requirements list.
Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM -
Hi,
We need to have the display of few weeks sales history in Stock Requirements/Lists screen-md04, how can we have it added to the mdo4 screen..the sales history can be pulled from mp38?.
Thanks.Savita,
MD04 supports jumping to any other transaction by means of a customized button that you can place at the top of the screen. MD04 > display your material/plant; then Environment > Own Favorites > Maintain. Once you have concluded that 'jumped-to' transaction, you are returned to the original MD04 display.
If this functionality is inadequate, MD04 has userexits that support customizing the display. In this case, spec out your exact requirements and hand it off to a developer.
Best regards,
DB49 -
Reading the Stock requirment List
Hello Every one,
I had some questions reading the stock requirement list. When I am placing the curser on a planned order and expanding the overview tree for the lower levels, system breaks down the requirement to the lower levels. Agreend But why does the system repeat the same set of materials more than once in the overview tree showing the dependent requirements twice in both the lists? Is there any standard sequence in which the Stock requirement list can be evaluated?
Any help on this is greatly appreciated.
Sincerely,
AjiDear Dogboy,
I am facing the same problem. Let I will explain in detail...
I am using AFS material. There is a requirement for Pant large size 200 quantity and small size 100 quantity. When I run system raises
For one line item of pant large size system create planned order no 1223 for 200 quantity
and for another line item pant small size system create planned order no 1223 for 100 quantity.
Now, in MD04, when i place the cursor in planned order 1223 of first line item and expanding the overview tree, system shows requirement as 200 quantity.
When I place the cursor in the second line item and expands the overview tree, system shows requirement as 200 instead of 100.
Is this happening due to AFS material?
Regards / US -
IDoc of Stock/Requirements List
Hi All:
The idoc of Stock/Requirements list is LOISTD01. The issue is, one of our business will have a non-SAP planning/scheduling tool integrated with ECC. They require me to send the Stock/Requirements list IDoc of all material/plant as frequently as possible. When I tried to execute POIT for generating the Stock/Requirements list it ran for 25 minutes for just one plant. And throw in 10 more plants and add the external planning tool's processing time you have a recipe for disaster to begin with. The before mentioned scenario was in Q and not in Production, which should not alter the scenario significantly. Question is, is there a way I can send partial changes to Stock/Requirements list dynamically as they happen? Is there any Business event trigger that I could use to trigger the generation of partial idoc or any other thing?
Pl. help.
Thanksi think its better to post this query here to get a good response - ABAP Development
Maybe you are looking for
-
AssertionError while trying to deploy a CMP Entity bean
Following are my deployment-descriptors - =========================================================================== ejb-jar.xml :- =========== <!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.c
-
I have an eight (8) GB iPhone 3G, but when on iTunes on my Mac, it says my phone only has 6.9 GB of space total. I just want to know why this is, and if I am able to get a new phone because of malfunction. Thanks!
-
Group select not adding rating stars or keywords in Win 8.
PC, Win 8, i-7. When I select a group of images by click on 1st image, and the shift Click on last image (now all are selected)... then hit the 3 star to rate them... only the first image gets rated. Same thing for key wording. It only happens on
-
Document tagging excludes fields
To achieve accessibility, we have Acrobat 8 tag the content in PDF files. The fields don't get included in the tag process. Is there some setting that affects this?
-
Tool or framework to interact with OTM and Logistic Service Provider(LSP)
Hi, We are using Oracle Transportation Management (OTM) service for the transportation management. But to interact with the LSP(logistic service provider) We need some tool. Please suggest me some tool or stable framework that can interact with OTM a