Increase number of rows in table control dynamically
Hi,
How can I increase the number of rows in a table control dynamically.If i have placed a table control in the screen painter with 5 rows, how can I increase the length to 10 dynamically in the coding.Kindly advice..
Best Regards,
Ashwini
Hi aswini,
where did you tell the system to have only 5 rows.
i dont think such an option of specifying the number of rows is possible.
as i reconfirmed the screen painter just now.
please let me know if possible.
try this.
in PBO.
describe table itab lines tc-lines.
if tc-lines is initial.
tc-lines = 5.
else.
tc-lines = 10.
endif.
hope this will serve your purpose.
thanks and regards
Ramchander Rao.Krish
Edited by: ramchander krishnamraju on Nov 19, 2008 11:52 AM
Similar Messages
-
How to set total number of rows of table control
Hi All,
I want to set the total number of rows of table control. I don't want to display the blank rows in table.
Regards,
ShrinivasNeed some fine tuning regarding the scrollbar height but it's a start
Unless this isn't what you asked for
Small number of rows
Large number of rows
Attachments:
PlayingWithTable.vi 17 KB -
How to increase the number of rows in a jTable dynamically?
Can anyone help me in increasing the number of rows in a jTable dynamically without using DefaultTableModel?
I don't want to use DefaultTableModel because my program is about to finish except this problem.
Thanks in advance.Presumably you're using your own custom table model class. Modify that so that it returns the number of rows you want. Though presumably it would do this anyway so I've no idea what the problem is.
Do you mean you've added rows to the table model but they're not being reflected in the table itself? You need to fire events - AbstractTableModel provides simple methods to fire them, but if you're not using that then you'll have to fire them manually. -
Hi Experts,
My Requirement is create a table control with 5 coloumns. The rows have to be displayed dynamically...
I created a screen , and placed a table control.
For eg :
if my internal table having 2 entries , then the table control should only have two rows....(no disable/greyout)
if internal table having say 40 entries , then the table control should have 40 rows...
Thanks,
Lakshmiraj.AHi,
Refer
table control dynamic rows
Dynamic rows increment according to user input in Table Control Module Pool
Hope this helps
Sumana -
BDC : to select different rows in table control
Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
nareshHi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author : Jagadish
Start Date : 11/06/2007
REPORT zfv11
NO STANDARD PAGE HEADING LINE-SIZE 255.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
kschl(004), "Condition Type
data element: SELKZ_LIST
selkz(001),
data element: WERKS_D
werks(004), "Plant
data element: ELIFN
lifnr(010), "Vendor
data element: MATNR
matnr(018), "Material No.
data element: KBETR_KOND
kbetr(016), "Amount
data element: KODATAB
datab(010), "Condition Validity Date from
data element: KODATBI
datbi(010), "Condition Validity To
data element: MWSKZ
mwsk1(002),
END OF record.
DATA : BEGIN OF it_new OCCURS 0, " Internal Table for Header Data
kschl(004),
werks(004),
lifnr(010),
END OF it_new.
DATA : BEGIN OF it_item OCCURS 0, " Internal table for Item Data
werks(004),
lifnr(010),
matnr(018),
kbetr(016),
datab(010),
datbi(010),
mwsk1(002),
END OF it_item.
DATA : cnt(2) TYPE n,
fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
BEGIN OF t_data OCCURS 0,
data TYPE string,
END OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
DATA : p_mode TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV13A-KSCHL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RV13A-KSCHL'
it_new-kschl.
PERFORM bdc_dynpro USING 'SAPLV14A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV130-SELKZ(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-KBETR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMG-WERKS'
it_new-werks.
PERFORM bdc_field USING 'KOMG-LIFNR'
it_new-lifnr.
DATA: "X(5) TYPE N,
N(5) TYPE N.
N = 0.
LOOP AT it_item.
N = N + 1.
ENDLOOP.
"X = 1.
CNT = 1.
DO N TIMES.
IF CNT > 19.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
ENDIF.
cnt = 1.
LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-matnr.
CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
PERFORM bdc_field USING fld it_item-kbetr.
CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datab.
CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datbi.
CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-mwsk1.
cnt = cnt + 1.
if cnt = 20.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
endif.
CLEAR it_item.
ENDLOOP.
ENDDO.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-MWSK1(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO it_msgtab.
CLEAR bdcdata[].
PERFORM error.
ENDLOOP.
Start new screen -Subroutine for screen s *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field -Subroutine for field s *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
*& Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = record
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
*& Form error
FORM error .
LOOP AT it_msgtab.
IF it_msgtab-msgtyp = 'E'.
SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
AND arbgb = it_msgtab-msgid
AND msgnr = it_msgtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
WRITE: / it_msgtab-msgtyp, l_mstring(150).
ELSE.
WRITE: / it_msgtab.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " error
*& Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
ON CHANGE OF record-lifnr.
MOVE-CORRESPONDING record TO it_new.
APPEND it_new.
ENDON.
MOVE-CORRESPONDING record TO it_item.
APPEND it_item.
ENDLOOP.
ENDFORM. " table_Control
Reward if useful
Thanks
Jagadeesh.G -
How to increase number of rows display in ESS
Hi All,
how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
Thanks all
MurtyKalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty -
Making a field visible for a particular row in table control.
Hi Experts,
I have a scenario where in there are 7 columns in table control wherein last column I have made invisible. Now I got to make that column visible only for the selected row and this column for the rest of the rows should be invisible.
How can I achieve this. Tried a lot playing with table control current line and cols structure but no fruit.
Please help. <removed by moderator>
Thanks,
Edited by: Thomas Zloch on Oct 19, 2010 2:38 PMHi All,
Sorry for late response. I was out of station for a while.
I tried a lot after going through the link provided by Robert and also tried what Anmol has suggested but its not working,
The column becomes invisible but it is not becoming visible again for the selected row.
The code I have written is as follows.
process before output.
module status_9000.
module tc_details_change_tc_attr.
loop at it_test
into wa_test
with control tc_details
cursor tc_details-current_line.
module tc_details_get_lines.
module customize. " Module to update table control dynamically
endloop.
module CUSTOMIZE output.
LOOP AT TC_DETAILS-cols INTO cols.
if cols-screen-name = 'WA_TEST-REMARKS'. " and wa_test-sel = 'X' ).
IF WA_TEST-SEL = 'X'.
COLS-SCREEN-ACTIVE = '1'.
COLS-INVISIBLE = '0'.
MODIFY TC_DETAILS-COLS FROM COLS INDEX SY-TABIX.
ELSE.
COLS-SCREEN-ACTIVE = '0'.
COLS-INVISIBLE = '1'.
MODIFY TC_DETAILS-COLS FROM COLS INDEX SY-TABIX.
ENDIF..
ENDIF.
ENDLOOP.
endmodule.
Please help. -
How do I deselect a row in table control on scrren?
Hello All:
How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
Thanks.
MithunI thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13) -
Enable/Disable Rows In table Control
I m getting material number for particular material doc. if i get N rows in output i want to disable all other rows of table control.
Moderator message: please search for previous solutions to similar problems before asking.
Edited by: Thomas Zloch on Nov 20, 2010 7:24 PMHi,
In PBO, Loop at your table control lines, create a module inside it and use
LOOP AT SCREEN.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDLOOP.
Regards,
Senthil -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
How to get all the index of "selected rows" in table control?
Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
IDNUM TYPE ZQID_CHECK-IDNUM,
WERKS TYPE ZQID_CHECK-WERKS,
MATNR TYPE ZQID_CHECK-MATNR,
LICHA TYPE ZQID_CHECK-LICHA,
LIFNR TYPE ZQID_CHECK-LIFNR,
ECOA_S TYPE ZQID_CHECK-ECOA_S,
ID_STAT TYPE ZQID_CHECK-ID_STAT,
ID_DATE TYPE ZQID_CHECK-ID_DATE,
FLAG_MAILCOA(1) TYPE C,
MARK(1) TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
END OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
W_TABIX LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PMHi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar -
Unable to delete a row in table control
Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkarhi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
WHEN 'DELETE'.
PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
DELETE int_factor WHERE chk = 'X' .
CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s -
How to select perticular row in table control for BDC
Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RPHi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP -
Is it possible to show the count of number or rows in table on the Home page Tab button.
Is it possible to show the count of number or rows in table on the Home page Tab button.
On home page there is a Tab called Count and I want to show the count on the right corner of this tab button.
Please helpCreate an application item. APP_HOME_COUNT.
Create an application process:
make the application process type "on new instance" if you only want this to run once
make it "on load before header" if you want to have the value set every page load
application process source:
select count(*) into APP_HOME_COUNT from <your table>
modify the tab name to reference the app item, maybe something like "Count(&APP_HOME_COUNT.)"
result should look like this "Count(5)"
Good Luck,
Tyson -
Searchin pattern in datbase table.(Number of rows in table :More than 3 cro
Actually i have a db table having 2 columns(columnA,time).db table has 70lac rows.I have to retireve all those values which are present min. 2 times in the interval of 10 minutes for a particular value of columnA. eg. columnA,time values are
{a,June-01-2011 10:13:12},{b,June-01-2011 10:14:12},{b,June-01-2011 10:15:12},{c,June-01-2011 10:16:12},{b,June-01-2011 10:17:12},{d,June-01-2011 10:18:12},{d,June-01-2011 10:25:12},{e,June-01-2011 10:26:12},{e,June-01-2011 11:38:12},{f,June-01-2011 10:39:12},{f,June-01-2011 10:43:12},{a,June-01-2011 10:44:12},{f,June-01-2011 10:51:12},{b,June-01-2011 10:51:12},{b,June-01-2011 10:53:12},{c,June-01-2011 10:54:12},{g,June-01-2011 10:55:12},{b,June-01-2011 10:56:12},{b,June-01-2011 10:57:12},{b,June-01-2011 10:58:12}
Then I have to retrieve following rows in output : {b,June-01-2011 10:14:12},{b,June-01-2011 10:15:12},{b,June-01-2011 10:17:12},{d,June-01-2011 10:18:12},{d,June-01-2011 10:25:12},{f,June-01-2011 10:39:12},{f,June-01-2011 10:43:12},{b,June-01-2011 10:51:12},{b,June-01-2011 10:53:12},{b,June-01-2011 10:56:12},{b,June-01-2011 10:57:12},{b,June-01-2011 10:58:12}
Is it related to data Mining? i have 3 crore rows in database table.I have to search such type of many patterns in my application.I have spent hours looking for tutorials on Google. However I cannot seem to find anything that holds the hand? try to be more clear, i'm in lack of ideas in this problem, even it sounds like a classic. Can oracle java data mining solve the problem?first of all thanks for reply, i will take care of your suggestion.
Number of rows in table : More than 3*10pow7(30 Milion rows)(But it can be more than 120 milion)
Actually i have to display all those rows which setisfy following criteria:( Specific value of column A should appear min 2 times in the interval of 10 minutes.)
for eg.
eg 1. {b,June-01-2011 10:14:12},{b,June-01-2011 10:15:12},{b,June-01-2011 10:17:12}{This set is appearing 3 times in the any interval of 10 minutes.}
EG2 {a,June-01-2011 10:13:12} is present only one time,so i dont want this rows in output.
EG# {e,June-01-2011 10:26:12},{e,June-01-2011 11:38:12} is present 2 times in db,but not in the interval of 10 minutes,so i dont want this rows as output.(t1=10:26:12,t2=11:38:12 difference is more than 10 minutes.)
In my eg. i specified only 2 columns but in actual scenario there will be 8-10 columns in table.This is only one pattern which i specified,but there are many more pattern which i have to search in db.As specified above in eg. was only one pattern,After fulfiling this pattern It has to pass many other pattern.and i want result should be retrieved very fast.
Please dont go into answer of above eg.Actually i want, what should be approach of such type of problems?
Is this problem related to oracle data mining and how?
Can data mining algorthms(Minimum Description Length ,Naive Bayes,Apriori,Decision Tree,Non-Negative Matrix Factorization ,Support Vector Machine...etc..) solve my problem?
Different-2 type of queries will be fired against this table?
if i am still not clear then let me know.
Maybe you are looking for
-
Error when creating spatial index in 10g
Hello. I have a problen when I try to create a spatial index. The strange thing is that the same commands always works fine in some machines, but if always fails in others. I tryed in diferent versiones of Oracle, but I have the error in al of them.
-
How do I turn off file vault when my hard drive is full?
I am trying to migrate all my files onto a new MacBook Pro but my current computer has file vault turned on. To turn it off and decrypt my user home folder I need more space on my hard drive. I have tried cloning my MBP onto a larger external drive a
-
Generate an Upload the current table to a comma seperated file
Hi Freaks, i want to generate a comma seperated file from the current table (which was modified in the current Apex Window) and also upload the file to a file server. What is the best practice? Thanks a lot Wolle
-
Hi all, it's a while that I noticed a strange behavior. Every time I suspend the System by closing the lid, I'm not able, after resuming to use the trackapd correctly. Actually, on resume, single tap and click seems like not working. The only way to
-
Tabular form: run procedure with Submit button
I am trying to create a form (pulling from two tables) that allows for 'one' column to be modified. Once you hit submit I'd like the following procedure to run: Begin Ht_bpe.populate_schedule; End; This will update the associated completion dates (ad