Increase the field width of multiselect control in prompt

Can we increase the width of a multiselect control in a dashboard prompt?
Please let me know.
Thanks in Advance

Satyabrat Acharya
I didn't understand you reply. Where this option in OBIEE?

Similar Messages

Increase the field width in ALV grid display

hi
My problem is that when i am trying to print data through REUSE_ALV_GRID_DISPLAY, a particular field which contain message is being truncated, i used ls_layout-colwidth_optimiser as 'X' and also t_fieldcat-outputlen = 1000, but still i am having this prblm, but i checked in the internal table that is passed in ALV, the entire data is stored there, but while printing its getting truncated for a particular field, please suggest me a solution to my problem.
Regards
Swarnali

Hey Neelam
this is a very old thread, so I don t remember the exact solution which I implemented,
however can you use the i_tab name in the field TABNAME of the field catalog.
Regarding breaking the message, you can use a STRLEN if you are aware at the no. of chars where it should break always or split at space the string in 4 strings.
Inside the field catalog you have to take an internal table with 4 different fields and show it.
Hopefully it should resolve your problem.
Regards
SB

Can't figure out how to maximize the space on the page by increasing the column width

Trouble with pages app:
can't figure out how to maximize the space on the page by increasing the column width
I have 3 columns and they have spaces btw them that I cannot close the gap on.

Whatever the version, you can click on the gutter figure and edit it.
Click once on the column and a second time on the Gutter measurement.
Peter

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to increase the spool width in ECC 6.0

Hai,
I am executing Z report in back ground mode , finally the output can see in SP01 t.code, in this output I am getting only max 10 columns out of 20 columns of the report. How I can increase the output width in SP01 t.code to see all columns data .
OR
Can u suggest any note which will help to me in ECC 6.0
Thank u in advance.
Ramesh

Hi Ramesh Babu no reposts plz..
How I can increase the output width in SP01 t.code to see all columns data

Decrease the field width for apex item..

I cant decrease the field width for apex item. i used apex_item.text in the select query report region.
i want to change the field width. i tried to change the element width..but no use. pls help how to change it.
thanks and regard,
skud.

The third parameter to apex_item.text is p_size. You can set the field width with this parameter.
Jure

How to optimize the column width in Table Control

Hi all,
When I am displaying fields in Table Control, the columns are displayed in full length, and I am unable to see all the fields at once.
So as in grid , where we optimize the column width using layout, do we had any property for TC to do so.
thanks for your help.
Points would be awarded .
Regards,
Anil .

Hi,
In Se51, you can do this one, ust open your table control and resize the TC, there is no direct option to do this for entire TC, you need to do this field by field, and arrage the TC to adjust in a Single screen. In the field parameters, you have the field lenghts, there you can minimize the length of a field
Regards
Sudheer

To display the content selected in multiselect control in a report..

Hi,
I have one requirement to display the content selected in multiselect.I explained my requirement below.
I have 5 multiselect boxes.they are locality,designation,connection1,connection2,connection3.
The corresponding designations will be displayed for the locality and the corresponding connection1 will be displayed for the designation and the corresponding connection2 will be displayed for the connection1 and the corresponding connection3 will be displayed for the connection2.everything is displayed correctly in the multiselect.
My requirement here is till connection1 i'll select mandatorily. and if i select connection1 and click GO button without selecting connection2 and connection3 then the connection1 only should be displayed in the report not the connection2 and connection3.likewise if i stop till connection2 and click go then connection2 only has to be displayed in the report not the connection1 and connection3..How can i do this?
i tried using dropdown and presentation variables but not all the values are displayed in dropdown and there is a limit in dropdown.so i'm going for multiselect..
Can anyone help me..

HI,
Sai Kumar Potluri
I tried in IDES it working.
Here is the code.
REPORT ZPRA_TC_D.
TABLES : SCARR.
CONTROLS TC TYPE TABLEVIEW USING SCREEN 1.
DATA : SELLINE TYPE I,
       SELINDEX TYPE I.
DATA : ACT LIKE SCARR-CARRID,
       ANT LIKE SCARR-CARRNAME.
DATA : ITAB LIKE SCARR OCCURS 0 WITH HEADER LINE.
CALL SCREEN 1.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'ME'.
* SET TITLEBAR 'xxx'.
SELECT * FROM SCARR INTO TABLE ITAB.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module MOV OUTPUT
*       text
MODULE MOV OUTPUT.
MOVE-CORRESPONDING ITAB TO SCARR.
ENDMODULE.                 " MOV OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'UP' OR 'EXIT'.
LEAVE PROGRAM.
WHEN 'SEL'.
GET CURSOR FIELD SCARR-CARRID LINE SELLINE.
SELINDEX = TC-TOP_LINE + SELLINE - 1.
READ TABLE ITAB INDEX SELINDEX.
ACT = ITAB-CARRID.
ANT = ITAB-CARRNAME.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT
In Flow Logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
LOOP AT ITAB WITH CONTROL TC.
MODULE MOV.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.

How to increase the field lenght of file uplaod in BSP application

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

How to increase the field size in modules

Dear Oracle Team,
When we add some items in reason codes from the dictionary, it has certain limit in reason code and title. So I can increase those field size to add bigger text for title names.
I think it also applicable for the fields in other modules also. Looking your valuable support.
Thanks & Regards,
Sheik

1. Once you add a custom field to your database, it would be made available to either your reports (BI) or your layouts in PCM.
2. When you create the custom field, you would specify the field length/type/properties. (i.e. "Char" field with 120 char field length) If you set this to one value when you create (say 120 char) and want to CHANGE it to 140 characters, you cannot do this without deleting and re-creating the custom field. I did check 14.0.3 and this continues in this version as well.
2a. Best practice is to be generous in your field sizes to avoid needing to change it later.
As I mentioned before, any default fields in the database are fixed to their set properties and the only way to change them is to submit an SR to Oracle to request the change.

Can we increase the field length of Packaging material type description

Hi,
The field length allowed for packaging material type description is 20 characters. If i need to have this length to be increased to 25-30.Is it possible?
I mean the description that we give when we create new packaging material type.
Pls let me know ur suggestions.

Hi Dhilipan Nair,
Unfortunately there is no standard way to change this, the desc. field of the view (V_TVTY-VTEXT) is created from the value T685T-VTEXT which has been defined with the Domain TEXT20, so in order to add addition characters to this field, you would need to redefine the preceding field type.
Regards
Stephen

Increase the row width - ALV

Hi Al,
When i try downloading the output in Excel thr ALV.
The row is decreased I want to increase the size of row depending upon the fields in Excel. Pl help me.

when i downloading into excel sheet.
the o/p is
date: 11/13/2006    dynamic o/p
matnr   mtart
38       descriptiom
i want to remove the date column i.e 1 colun in excel sheet.

Need to increase the column width for KE30 form

Hi
When we are running the KE30 in background, spool is generating. However the columns in the output are very narrow (and the information cannot be read). Where do you control this?.
Eg : Orders B - *3105,54 (Outpput value is not clear and unable to read from the spool)
I tried to change the column width of forms in KE35 but it doesn't work as expected.
Expecting you suggestions/assistance on the same.
Regards
Aparna

Hi Aparna,
First select report output column then from Menu bar Setting -> Number Format, select Factor 1.
Regards,
Santosh

How to increase the Field length

Hi All ,
I have to increase the Standard Field length in a transaction.
is that possible ? if yes , how we can do that ?
thanks and regards,
Deepak Rana.

it is not advisable to change the format of standard SAP table fields. most of them are being used in many different places, you will have a hard time making sure that all functionality still works OK after such a change.
maybe you can append new fields to ADRC and work with these.
Greetings
Thomas

Increase the field width of multiselect control in prompt

Similar Messages

Maybe you are looking for