Increasing the LockBlock setting

Hi,
I'm trying to create an automated process where I can define the exact dimension members that will be exported to an SQL table.
I'm using the DataExport command to do it, and substitution variables that will fill the FIX statements of the dataexport query.
Since users can select a great number of blocks depending on the selection made, I'm getting the Dynamic Calc Processor error:
Dynamic calc processor cannot allocate more than [1200] blocks from the heap. Please increase CalcLockBlock setting and then retry
1200 blocks is the default number I have in Essbase.cfg, while CALCLOCKBLOCKHIGH as a higher number. However using SET LOCKBLOCK HIGH; is not helping getting around the problem and I'm not sure why.
Any ideas?
Thank you
Edited by: Icebergue on Nov 27, 2012 7:42 AM

No, I'm not using parallel calc and yes, I'm exporting dynamic calcs :) Exporting stored members is not a problem because if I switch DataExportDynamicCalc to OFF it works well.
Block Size: ~ 60 KB
Data Cache: 2000000 KB
SET LOCKBLOCK HIGH;
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportDynamicCalc ON;
DataExportrelationalFile ON;
DATAEXPORTOVERWRITEFILE ON;
DataExportDimHeader OFF;
FIX(&YearOrc, "ORC_N","Base","FRAC")
     FIX("OCSPROJREC")
          FIX(@CHILDREN(RNVIDA))
               FIX(TOT_CHANNEL)
                    FIX(&ExportAccount)
                         FIX("Jan":"Dec")
                              DATAEXPORT "DSN" "dsn_name" "table_name" "username" "password";
                         ENDFIX
                    ENDFIX
               ENDFIX
          ENDFIX
     ENDFIX
ENDFIX

Similar Messages

How can I set timings to increase the size of an image in a Keynote presentation?

I know how to use inspector to bring in and fade out text boxes, but at the end of a slide I have a graphic (that is at the bottom of the slide during the rest of the slide) that I want to increase the size of to take up the entire slide. How can I do this?
Thanks

Welcome to Apple Support Communities.
The effect you're looking for is 'Scale'
In Keynote '09, 5.1.1 select the graphic.
Click Inspector in the tool bar, Build Inspector (3rd icon from the left), (Build In and Build Out are both set to None for this step) Effect, Action, and then Scale.
It rescales ('zooms') the selected item (image) up or down from 0% to 200%
Clicking on the More Options button at the bottom opens a drawer to the left, and gives you more control over how the build occurs, whether they happen automatically, timed, or when you click, and re-order build steps.
At 200%, double the original size, resolution could be a problem. There is a workaround, because it also scales smaller, down to 0%. So I would scale the graphic down 'small' as the first step to fit at the bottom, (even hide it behind a background-colored box) as you scale it down, and then at the end, scale up to full size to fill the screen at 'normal' resolution.
In the attached example, I use a 'scale' up to go from 100% to 130% on a map, and use arrows and a flashing line to point out the road where a specific business is located with 12 steps. Some elements in my slides have been intentionally obscured. For simplicity, I've eliminated showing any steps but the initial title and the scale.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

I set up time capsule using a wireless 4g modem. it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB). Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

I set up a new time capsule on a wireless 4g modem. I started the initial backup. It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)." Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
Thanks,
David

Bunce wrote:
oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
suggestions before I either get this looked at or scrap the HD on it and move forward.?
Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

After you increase the page size with Ctrl/plus, is there a way to keep the new setting?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/845611]''
My new laptop has great features but a smaller screen. Changing the resolution makes everything look awful. Using Ctrl/plus to increase the page size in Firefox solves the problem, but you lose the new setting when you go to a different page. Is there a way to keep the new setting until you reverse it with Ctrl/minus ?

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

You can drop the resolution a little, but it makes everything blurry.
OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
The UI really needs to be adjustable and it's not.

Possible to increase the total size of a software raid set?

Hi,
I need to increase the size of a software raid set which is internally in one of the Xserves - originally it had 2x 400G drives.
I've swapped drives into the raid so they are both now 500G drives.
diskutil info drive XX (ie raid set) shows that the raid is still a 400G raid volume as expected.
Question is - can I grow the Raid Total Size to use all the capacity of the member volumes?
I guess the alternative is to remove the drives from the raid, enable raid on one of them and then add the other drive as a member... but this would mean I would have to take the raid offline.
The raid sets are not my system disks.
Any clues?
TIA
Campbell
XServes Mac OS X (10.4.5) 12 Macs & far too many PCs

Thanks for your help.
I rebuilt the array using enableRaid. Worked fine with Raid Volume offline for approx 5 minutes - although I had to degrade the array (and go bare with no mirror) twice in the process.
In case anyone is interested, this is what the process was:
1 Swap into Raid array larger drive (say, disk 2) and let array rebuild
2 Disable file services.
3 removefromraid disk 2 (leave it mounted).
4 Unmount the raid set and eject drives (say, disk 1) Remove drive - it's the only original backup.
5 enableRaid on disk 2
Providing enableRaid is ok -
6 Insert a fresh larger size drive in the place of the removed drive (disk 1)
7 Unmount new drive and addToRaid
8 (Rebuild array). Providing rebuilding ok -
9 Start file services again.
Data, permissions & ACLs were all intact. So now users can fill the rest of the raid up with more MP3s this week <sigh>
Maybe not the best approach but it worked well for me.
XServes Mac OS X (10.4.5) 12 Macs & several hundred too many PCs

Increasing the Vista partition after It's been set up.

Is it possible to increase the Vista partition after It's been set up? I'm also using VMware. I have Vista Ultimate installed but dont seem to have the ability use the Aero features. Is this because I only have 5 gigs on the windows partition? Also should I increase the system resources for the windows side to be able to use Aero.

5GB left? I think MS and probably Apple recommend 20GB minimum and 40GB as more reasonable.
Just installing updates and patches, SP1 and later SP2, can require 5-10GB of free temp space. Plus room for paging, hibernation, cache and temp files.
Aero also depends on graphics, and amount of RAM.
Paragon Software's CampTune is a resizing bootCD, but you should make a backup first with WinClone which can also restore to a larger partition.
http://www.paragon-software.com/home/camptune/
http://www.twocanoes.com

Can I set Acrobat X to increase the proportion of my PC's RAM it uses?

Can I set Acrobat X to increase the proportion of my PC's RAM it uses, in order to speed up OCR processing? Currently, it uses up to 25% of my PC's RAM when OCR processing but I would like to increase this in order to complete OCR jobs more quickly.

Short answer: no.
Long answer: a very few programs can use multiple cores. To do this, they have to split up and run themselves as multiple separate programs (in effect). This is only really suitable when either
(a) two entirely different things need to be done or
(b) a job can be split up into a lot of identical jobs, and all done at the same time.
Photo editing and video editing are the obvious cases of (b), since they have to repeat the same stuff over each bit of a picture, and a picture could be done in slices. Making programs run on multiple cores is awesomely complicated (especially if they previously didn't) but it's no coincidence that Adobe Photoshop and (I think) Adobe Premiere Pro - being image and video editors - are out there using multiple cores.
OCR doesn't lend itself to this terribly well (since the entire page is context), but what could work well is a program which is designed to do OCR on multiple files; it could split up and do them at the same time. Acrobat isn't that kind of high end program, however, it's meant for desktop users doing one thing at a time.

HT1198 I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

Done. Thank you, Allan.
The sparse image article you sent a link to needs a little updating (or there's some variability in prompts (no password was required) with my OS and/or Disk Utility version), but it worked.
Phew! It would have been much more time consuming to use Time Machine to recover all my photos after repartitioning the drive.

How to Increase the 15 Minute Idle Timeout?

I saw some similar posts to increasing the EM timeout, but they didn't seem to relate to the idle timeout period.
I need to increase the idle timeout from 15 minutes to something more like 30 minutes. A lot of times, I'll be editing a package with 10g on the web and doing some research online in between edits, only to come back and be timed out for no activity within 15 minutes. That's just too short. Can I increase the time? Where can I find that setting?
Thanks!

Change or Add the parameter in emoms.properties
For DBconsole
$ORACLE_HOME/servername.domain_SID/sysman/config/emoms.properties
For Grid Control
$ORACLE_HOME/sysman/config/emoms.properties
For example, you can change this time to 60 minutes (1 hours) by adding the following lines to the above file.
oracle.sysman.eml.maxInactiveTime=60

A script to increase the minimum canvas size? (Like Fit Image, but with just my canvas)

For starters to be clear, I'm looking to manipulate canvas size. Not image size.
I want to create a script to automatically increase the width and height of my canvas in Photoshop to a specific size when necessary. I only want this to happen if my canvas is less than that specified size. For example: Let's say my canvas size is 300x250. I want the canvas to be at LEAST 600x600. If I run my action it will increase the canvas size to 600x600 for me. If I run this same script on an image where the canvas size is already 700x700, it won't do anything at all to it because both the width and height are equal to or greater than my target size.
It would also need to work with the height and width on an individual basis. If my image is 400x800, the action would increase my width from 400 to 600, but it would leave the height of 800 alone. So the final canvas size will end up being 600x800.
It's kind of like the "Fit Image" option in Photoshop, but I only want to manipulate my canvas size, NOT my image size.

It is possible.
But if you hope that the dialog remembers the last settings that would require storing those values (which could be done with a txt-file at some pre-defined location), but it would make the Script a bit more complicated.
// resize canvas in either direction if it is below a defined minimum;
// 2011; use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
// dialog;
var dlg = new Window("dialog", "increase width and height if under", [500,300,750,380]);
// filter for checking if entry is numeric, thanks to xbytor;
numberKeystrokeFilter = function() {
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\d]/g, "")
          if (Number(this.text <= 0)) {this.text = 5};
          this.text = Math.round(Number(this.text));
// fields for entry;
dlg.hor = dlg.add("edittext", [14,15,88,35], "600", {multiline:false});
dlg.hor.onChange = numberKeystrokeFilter;
dlg.horText = dlg.add("statictext", [93,15,118,35], "px", {multiline:false});
dlg.ver = dlg.add("edittext", [129,15,210,35], "600", {multiline:false});
dlg.ver.onChange = numberKeystrokeFilter;
dlg.verText = dlg.add("statictext", [215,15,240,35], "px", {multiline:false});
dlg.hor.active = true;
// ok- and cancel-button;
dlg.buildBtn = dlg.add("button", [13,45,118,68], "OK", {name:"ok"});
dlg.cancelBtn = dlg.add("button", [128,45,240,68], "Cancel", {name:"cancel"});
// show dialog;
dlg.center();
// show dialog;
var myReturn = dlg.show ();
// proceed if ok-ed;
if (myReturn == 1) {
var myDocument = app.activeDocument;
// set to pixels;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
// set the minimum values;
var minWidth = Number(dlg.hor.text);
var minHeight = Number(dlg.ver.text);
// get current ones;
var theWidth = myDocument.width;
var theHeight = myDocument.height;
// resize canvas;
myDocument.resizeCanvas(Math.max(minWidth, theWidth), Math.max(minHeight, theHeight), AnchorPosition.MIDDLECENTER);
// reset;
app.preferences.rulerUnits = originalRulerUnits;

How can I increase the font size of my email when I print it out, it is printing tiny

How can I increase the font size when I print out emails, it is printing tiny size?

In the Print dialog window, click the small reveal-button to the right of the printer's name -
The window will expand to show additional settings (similar to 'old' Page Setup) -
Be sure "Scale:" is set to 100% and the 'Keep apparent font size' item is checked.

In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

Question
In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

How can we increase the maximum number of records which we export from UME

Hi All,
Is there any way to increase the maximum number of records which we can export from the UME.
Please give your valuable suggestions as soon as possible.
Thanks in Advance
Regards,
Ramalakshmi.S

I didn’t find any configuration you can set to increase the number. I think it is related UI. The number is designed programmatically.
Lisa Zheng
TechNet Community Support

Increasing the LockBlock setting

Similar Messages

Maybe you are looking for