Incremental Load using Do Not Process Processing Option

Hi,
I have an SSAS Tabular model which is set to Do Not Process. How do I refresh and add new data to the model without changing the processing option
me

Hi Liluthcy,
In a SQL Server Analysis Service tabular model, the process has the following options:
Default – This setting specifies Analysis Services will determine the type of processing required. Unprocessed objects will be processed, and if required, recalculating attribute relationships, attribute hierarchies,
user hierarchies, and calculated columns. This setting generally results in a faster deployment time than using the Full processing option.
Do Not Process This setting specifies only the metadata will be deployed. After deploying, it may be necessary to run a process operation on the deployed model to update and recalculate data.
Full – This setting specifies that both the metadata is deployed and a process full operation is performed. This assures that the deployed model has the most recent updates to both metadata and data.
So you need run a process operation to update the data.
Reference:
http://www.sqlbi.com/articles/incremental-processing-in-tabular-using-process-add
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Is it possible incremental load using sqlloader

Hi
I am working on datawarehousing projects and every day loading 3 lakhs record to target server using sqlloader.Is it possible incremental loading using sqlloader
Example First day loaded 3 lakhs record into target using sqlloader ,when next day need to load another 2 lakhs records .Using sqlloader how to do the incremental load?
Thanks inadvance
Mohan

Hi
The sql loader has three options
Append
Replace
Truncate
The first option will help you and append the data and will not reject the duplicate . FOr rejecting duplicate record rejection make sure table has constraints.
Prashant_Arvind

Apps wanting to access my location when not in use (and not giving the option to turn it off)

For most apps, I can choose to share my location 1) not at all; 2) when the app is in use (my favourite); 3) always (even when not in use).
Why do some apps not offer the second option?
For instance, I want to use an app that locates the nearest automatic external defibrillator (if someone has a cardiac arrest) but I can only use the app when I allow the app to access my location all the time. Given the fact that I will use this app perhaps only once every 15 years, I see no point in giving them my location for the next 15 years! That's just a waste of battery power and also a breach of my privacy.
Second example: Apple's own weather app. I check the weather maybe once every month. I do not want the app to locate me all the time. But I can only choose between option 1) and 3) above.
Is there a technical reason apps work like this? Or are they just sneakily trying to get as much information about me as possible?
Thanks for your thoughts.
PS: I am using iphone 6, iOS8.3

everything rudegar said is right on. Still, 10% overnight is more than you would expect - so something is still running. try-
double click the home button, and see what apps are listed as recent. one or more of them might be still churning away. it is a good idea to close those out fully every night. Any of those apps with notifications or location services may be checking in every now and then and using your power.
you mentioned airplane mode is 'off'. this may be a terminolgy thing - but having airplane mode 'off', means that the radios are on. WiFi, and 3 G if you have it. turning airplane mode "on" turns off the radios.
with everything off on mine - (except I leave the wifi on) - i use 2 or 3% overnight.
But if you really want it off - do what rudegar says.

While loading data I am getting Access violation process dump option is off in sap bods

Hi All,
I extracting the data from ECC table and loading it in ORACLE table SAP BODS tool.
While starting the extract itself i am getting the error like below,
6628
8592
SYS-170101
24-Apr-15 9:41:20 PM
System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
Kindly help me to over this error.
Thank you,
Regards,
Vinodh Seemakurthi

This can be caused by many things, I recommend searching SAP Support Portal for ACCESS_VIOLATION and using the Call Stack to track down the specific issue.
e.g.,
Call stack:
0x000000008052DDAD, Exec_frame::addr()+0013 byte(s),
0x00000000801D0966, XDataflow_desc::initialize()+0358 byte(s),
0x00000000801D2DEA, XDataflow_desc::executeInline()+0122 byte(s),
0x00000000801DE0FD, XDataflow_info::execute()+0925 byte(s),
0x00000000801CFC52, XDataflow_desc::execute()+0114 byte(s),
0x0000000080073756, AE_Main_Process_Options()+61558 byte(s),
0x00000000800840C6, AE_Main()+3238 byte(s),
Exception code: C0000005 ACCESS_VIOLATION
Fault address: 000000018052DDAD 01:000000000052CDAD G:\Program Files (x86)\SAP BusinessObjects\Data Services\bin\acta.dll

Data packet not yet processing in ODS load??

Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)
Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages

John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note 613440 also.
Note : 647125
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
 ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
 ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram

Golden Gate - Initial Load using parallel process group

Dear all,
I am new to GG and I was wondering if GG can support initial load with parallel process groups? I have manage to do an initial load using "Direct BULK Load" and "File to Replicat", but I have several big tables and replicat is not catching up. I am aware that GG is not ideal for making initial load, but it is complicated to explain why I am using it.
Is it possible to user @RANGE function while performing Initial Load regardless of which method is used (file to replicat, direct bulk, ...) ?
Thanks in advance

you may use datapump for initial load for large tables.

Error "Could not retrieve process instance" w UWL-GP thru Load Balancer

Hi,
We're using NW'04s EP SP14 for developing our portal website. An external load balancer balances the load between two portal instances CI & DI.
We are getting an Exception "Could not retrieve process instance: contact your system administrator" when we try to access the UWL Requests through the Load Balancer though it is working fine with the direct HostName in the URL.
SAP Note 1026119 did not solve the issue.
Has anyone faced such an issue before?
Thanks.

Hi
I am getting the same error, but when i tried to retrieve the process instance from nwa I see the process instance to be missing. I could not trace the process instance.
Can you please tell me where else can i look for the process instance.
Its very urgent
Thanks and Regards
Anitha

Need help in triggering the Data stream load using process chain

Hi Guru's
is it possible to trigger a data stream load using process chain?
Any help is highly appreciated.
Thanks
Indiran

Hi Indiran and welcome aboard!
Don't think this is possible. SAP BW & SAP SEM-BCS are rather independent systems. Though, BCS lives on top of BI-BW stack, it even may have master data different from those in BW.
Process chains, AFAIK, is completely the BW's feature. Certainly, you may use PCc on BW side, loading ODS/DSO and cubes involved in BCS data model.
The main con here is the lost transparency -- you don't control everything from the consolidation monitor.
The pro side is also rather obvious for me. Since, very often there is a huge difference between data quality at the data source and in the BCS totals cube, I need to make a lot of data transformation. Not only some data calculations or cleaning, but also transformation of data model: key figure model -> account model. It's much more easier to do in BW, for me.
I even call the ODS/cubes/routines involved in such transformation as intermediate layer, the layer between data source and SEM-BCS.
And this layer lives rather independently from BCS.
Hope this helps.

Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process

Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process
thank you

Yes you can.
Alternatively, you can email [email protected]

Process MAD.EXE (PID=1932). All Domain Controller Servers in use are not responding:

Process MAD.EXE (PID=1932). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC).
Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about
the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Process MAD.EXE (PID=1932). All Domain Controller Servers in use are not responding:
DC02.targetiletisim.local
DC01.targetiletisim.local
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1148). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
pls help me :(

Hi,
Please use dcdiag and nltest to test the connectivity.
BTW, have you disabled ipv6 on Exchange Server.
Thanks,
Simon Wu
TechNet Community Support

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currenty able to see or process his images. Can you please help? thankyou!

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!

According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted.

HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
Thank you for your recent iPhone 5 purchase at the Apple Store.
We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
Thank you for shopping with Apple.
Sincerely,
Apple Online Store Team

ETLs processes - Full vs Incremental loads

Hi,
I am working with a customer who already have implemented Financials Anlysis in the past, but now the requirement is to add Procurement and Supply Chain Analysis. Could anybody tell me how to the extraction of these new subject areas? could I create separate Executions Plans in DAC for each subject area or I need to create one ETL which contains the 3 areas?
Please help me! I also need to understand which is the difference between full load and incremental load, how I configure the DAC to execute either full or incremental extraction?
Hope anybody can help me,
Thanks!

In regards to your "multiple execution plan" question: I usually just combine all subject areas into a single execution plan. Especially considering the impact Financial Analytics has on Procurement and Supply Chain subject areas.
The difference between full-load and incremental-load execution plans exists mostly in the source qualifiers date-constraints. Incrmenetal execution plans will have a $$LAST_EXTRACT_DATE comparison against the source system. Full-load execution plans will utilize $$INITIAL_EXTRACT_DATE in the SQL.
A task is executed with a "FULL" load command when the last_refresh_date for that tasks target tables is NULL.
Sorry this post is a little chaotic.
- Austin
Edited by: Austin W on Jan 27, 2010 9:14 AM

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Incremental Load using Do Not Process Processing Option

Similar Messages

Maybe you are looking for