Incremental Loading: Update: Use for Matching

I'm using
Oracle DB 9.2 with OWB version 9.0.3.35.
In doing an update/insert mappping.
When I enter the Attribute Properties of the Target Table for the Attribute I want to Update, the "Update: Use for matching" is set to NO and its grey out. Meaning I can't change it to YES to validate the mapping.
Any suggestions on what's causing this and ideas on how to fix.

Check if All Constraints are enabled for the target itself. If it is, change it for No Constraints and you should be able to change each column propertie. It worked for me... But do you need to keep the constraints?

Similar Messages

Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc

Hi,
Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc.
Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?
12.1.4 / 11g db
Appreciate your inputs.
Thanks,
K

Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc. It should work.
Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, What is the issue you have with R12?
an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?What was Oracle feedback? Did they say it is certified and can be used?
Thanks,
Hussein

Incrementally Loading Data Using a Data Load Buffer

Hi
I am using Essbase 9.3.1. I am trying to use the feature "Replacing Database or Incremental Data Slice Contents" for my data loads to the ASO Cube.
I have 2 data sets, one of them is 2 years history. And another is last 3 months which would be changing on a daily basis. I looked at that DBAG and they have exact same scenario as an example for this feature. But I am not able to overwrite my valatile data set with my new file.
Here is what I do
alter database ${1}.${2} initialize load_buffer with buffer_id ${6} resource_usage 0.3 property ignore_missing_values, ignore_zero_values ;
import database ${1}.${2} data from data_file '${3}' using server rules_file '${4}' to load_buffer with buffer_id ${6} add values create slice on error write to '${5}' ;
alter database {1}.{2} merge incremental data;
alter database ${1}.${2} clear aggregates ;
execute aggregate process on database ${1}.${2} ;
In fact my data from my new (incremental file) does not even make it to the database. I checked that it does get rejected.
Am I doing something wrong over here. How do I use the concept of "data slice" and its incremental load feature.
Can anyone please explain ?
Thanks
Mandar Joshi

Hi,
Just wondering if anyone had any inputs or feedback on my query. Or is my question a really stupid one and does not deserve any attention :)
Can someone explain how the "data slice" concept works ??
Thanks
Mandar Joshi.

Wrong Caller-ID displayed - only rightmost 4 digits used for matching number - name

Hi,
Some days ago I discovered a rather strange and very confusing behavior on my Z10 wrt matching calling number to stored contact (name):
When you get a call there should be a "reverse lookup" in the phonebook matching number to name. As it seems the match number to name is solely done based on the rightmost 4 digits. This can lead to very confusing situations to say the least:
Say you have the number +43123456789 stored belonging to "Smith". Now when you get a call another number, say +432838126789 the Z10 displays the calling party as "Smith" - which is defintely wrong.
The same holds true when placing outbound calls: Again, take the contact Smith having +43123456789. Suppose on Z10s dialpad you enter a number, say +43228376789 (righmost 4 digits are the same). When you finish the call in your last call log the Z10 displays the number called as "Smith" - which is completely wrong.
So here are my questions:
Anybody else seen this behavior
Any known cure against it?
BTW - this is happens not only on my Z10 but on every Z10 that is used in our company.
Thanks much in advance for any clue,
-bblacksheep
Solved!
Go to Solution.

Test the recommedationa and see if it works.
Remove the country code from the number you're dialing and see if it fixes it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pages are not loading after using for 20 min so i have to use task maneger to shut it down and restart

i can download for about 20 min then i try to go to another page by opening a new tab or using a bookmark Firefox totally freeze's up so i have to close down and go into the task mngr and shut down the process for firefox and restart because if i do not do that it will not open back up i am using vista home pro on a 64 bit system please help this very bothersome

This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Feature Request For Next iTunes/iPod Update - Useful For Many

Hi, I have always wanted a feature for iTunes like this:
I want there to be "pocket" playlists - playlists for songs that I (and others) wouldn't normally listen to, but have in my library just for the heck of it, i.e. prank calls, music my parents requested, songs put there as a joke for my friends, etc. However, when I want to play my whole library (like in shuffle mode), I don't want those songs to play. I ONLY want them to play when I choose the special "pocket" playlist for these type of songs.
The only way I can see of to do it now is to make two playlists - one for these pocket songs, and another one for all the rest of the songs. But, I find it a HUGE hassle to move every song I like to the "Normal" playlist - I love music and download a lot all the time, so I quickly lose track of which ones I added or not.
Is this something that someone else will want in a future release?
Please give me your feedback.
Thanks!

One way to achieve what you want is to set these tracks to a new genre that you create - something like "joke" or anything else that you can clearly identify. Then create two new smart playlists, one setting "genre is <yourgenre>" and one setting "genre is not <yourgenre>". You could do the same thing with the Grouping category if you don't want to change the genre on those rarely-to-be-played tracks.
Then you don't have to worry about moving tracks to a playlist and hoping you won't miss any; all you'll have to worry about is labeling your "rarely play" tracks with the genre you've created.
Otherwise, the iTunes engineers would have to add the ability to create a playlist that could play tracks even if they were unchecked. Then you could uncheck the tracks from the main library and still have them play. You can suggest this to Apple through the iTunes feedback page (we're all just fellow users here so suggestions aren't likely to get to the proper folks within Apple).

Incremental Loads like daily or weekly runs in IOP

Generally when we do incremental loads in production we opt for load replace or load update.
I think in case of RS we opt for load update while for dimensions we opt for load replace is it correct understanding?
Also should we run stage clear rowsource and stage clear dimension commands before loading RS & Dim. in order to be on safer side to clean up previous run left overs in stage area.

Integrated Operational Planning uses update when the input data stream is incremental; for
example, inventory at the end of the current week. Replace is used when the data stream is a
complete snapshot of the data in the external system.
Doing a Stage clear rowsource usually depends on whether you would need to the earlier data present in the stagging area to be kept or not. If the data in the rowsource is not used it is is usually preferred to be run Stage clear rowsource before updating the stagging area with new data.
This can also be achieved in 1 line using stage replace which is equivalent to doing stage clear + stage update.

Recommended distortion method for matching two images

I have two images of North America as separate layers that I'm trying to line up as closely as possible. One is a color image of the earth's surface while the other is a grayscale image representing the topography of the terrain. There are many obvious visual features in the images to use for matching, but I'm not sure what is the best tool or workflow for distorting, scaling, skewing, etc. I have previously been using "Warp," but while I can line up certain areas easily, other areas appear quite difficult to line up. I'm wishing there was a way to define "features" that I want matched up and then let Photoshop do an automated process, but I think that may be asking a little much. Because the images may have been taken from different angles, it's not just a simple non-proportional scale problem. Some areas need to be squished while other areas need to be stretched. Any suggestions?

If the two maps are from different sources or different times, or have been created using different map projections, or if the two maps have different levels of accuracy, you may not be able to get a perfect match-up.
Neil

How to setup daily incremental loads

Hi:
OBIEE 11.1.1.6
OBIA 7.9.6.3
I've been building and configuring OBIA in a test environment, and I'm planning the go-live process. When I move everything to production, I'm sure I would need to do a full load. My question is, what do I need to do to change the DAC process from a full load to a nightly incremental load?
Thanks for any suggestions.

Go to DAC->Setup->Physical Data Sources-> select the connection type any of Source or Target
Look for the 'Refresh Dates' for list of tables make sure you have data entry of Yesterday or any date.
Do the same for Source and Target connections
Pls mark if helps
Question for you:
1) Do you have Production environment up and running daily loads? If yes what you are trying to do?

HT1338 trying to update from 10.6.8 to Lion. Refuses to load because HD used for Time Machine updates. Anyone know how I solve this? Chris

trying to update from 10.6.8 to Lion. Refuses to load because HD used for Time Machine updates. Anyone know how I solve this? Chris

What do you mean you're in the process of "downloading the installer for 10.7.3"? If you mean the software update combo, you won't be able to use that to go from 10.7.4 to 10.7.3. The only way you could do that is to reinstall the whole OS from the App Store IF that version is 10.7.3. I don't know if the App store Lion installer includes 10.7.4 already, but if it does, you can't get to 10.7.3 at all.
As for what you do about your slow machine, there are tips all over the internet. I wrote up some of the basic one's to try here:
http://applehelpwriter.com/2011/12/05/why-is-my-mac-running-so-slow/
Other possibilities not mentioned there are either a corrupt install of Lion (solution; re-install from the Recovery disk) or hardware failure (old hard disks and other hardware components can sometimes give out there last after the strain of a new install).
(ToU Disclaimer: my link contains links to other pages which advertise my services as a technical writer).

Which operator should i used for loading not matched records

HI ALL,
I am just evluate OWB tools.
and i met a question.
I need to join two tables A and B with Condition A.id=B.id
For example,
A has 1000 records, and B has 100 records,
what i need to do is
(1) to get matched 100 record from B to a new table C,
(2)to get the not matched 900 records from A to another table D.
By the requirement like above, which operator could i use for?
I tried to use joined but can not get the record of (2).
Thanks for your attention.
Regards

Hi,Sutirtha
Thanks for your attention.
because joiner has only one output group.
so what you mean is use joiner operator twice?
One joiner userd to get the matched records,
and the other used to get unmatched records?
Thanks
Rachel

HT204074 I have a family Apple ID for iTunes and Apps and then two iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match?

I have a family Apple ID associated with my iMac and iPad for iTunes and Apps and then two new iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match on the iPhones given there are two Apple IDs "loaded" on the iPhone?

Hi Monkey_Dawg,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
- Judy

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

HT4913 i am trying to get my computer and my wifes computer on my itunes match. i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain. is this going to screw my wifes account up?

If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.

I only have 1 Apple ID. I turned off iTunes Match on my iMac, and now I cannot turn it back on. I get this error when I try to just turn iTunes Match back on, on the same computer, with the same Apple ID that I used orginially to subscribe to iTunes Match:
This computer is already associated with an Apple ID.
You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.
I checked for iTunes updates. None are available since I am using the latest.
I stopped/started iTunes. I rebooted the iMac.
NOTHING HELPS!!!!!!!!
I have a Mac Mini and I use the same Apple ID on iTunes there. I was able to turn iTunes Match off and back on with no trouble at all but my iMac refuses to allow me to turn on iTunes Match.
Now what do I do?

Unless you really only have one AppleID that you use with the iTunes Store there's really nothing you can do. In the case of having only one AppleID you should contact iTunes Store support, since that would be a server-side problem.

Incremental Loading: Update: Use for Matching

Similar Messages

Maybe you are looking for