Indesign debug version(64 bit) throws exception while loading pluggin

I build a sample plugin in Microsoft Visual Studios 2010 in debug X64 mode and copied the generated files from debugX64 folder to the plugin folder inside indesign folder.
But In-design is throwing exception in loading the plugin. Any help will be appreciated. Please note that same plugin when compiled and released using release version of indesign is working.

The issue was I trying to load 64 bit pluggin into 32 bit version of Indesign. Got resolved after loading into correct version.

Similar Messages

How can I get a indesign debug version?

How can I get a indesign debug version? is it free?
Anyone could give me a download link?
thanks

I know this is available to solution providers, if you are registered as such at partners.adobe.com. I don't know what level of membership is required, but that is one place the debug version is available from.
Thanks,
Max
Max Dunn
Silicon Publishing
www.siliconpublishing.com

Exception while loading process

Hi all,
I just installed BPEL 2.0.10 (PM and Designer) and as I completed my first BPEL process (a simple invocation of a synchronous WS) I got the following problem
<2004-09-09 19:05:47,036> <DEBUG> <default.collaxa.cube.engine.deployment> <Cube
ProcessHolder::bind> Exception while loading process
ORABPEL-05217
Error while creating process.
An error has occurred while attempting to instantiate the class "bpel.FirstBPEL.
FirstBPEL__BPEL4WS_BIN" for the process "FirstBPEL" (revision "1.0"). The excep
tion reported was: bpel.FirstBPEL.FirstBPEL__BPEL4WS_BIN
Please try recompiling your BPEL process again. The current BPEL process archiv
e "FirstBPEL" may have been compiled with an older version of "bpelc".
Obviously I have no older version of 'bpelc'. The stack trace reported
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProc
essFactory.java:83)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProce
ssLoader.java:351)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcess
Loader.java:276)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(Cube
ProcessHolder.java:698)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeP
rocessHolder.java:512)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getStatus(CubePr
ocessHolder.java:168)
at com.collaxa.cube.engine.CubeEngine.lookupProcessStatus(CubeEngine.jav
a:967)
at com.collaxa.cube.beans.BPELProcessManagerBean.getErrors(BPELProcessMa
nagerBean.java:52)
at com.collaxa.cube.beans.ProcessManagerBean_1eyxw1_EOImpl.getErrors(Pro
cessManagerBean_1eyxw1_EOImpl.java:370)
at com.oracle.bpel.client.BPELProcessHandle.getErrors(BPELProcessHandle.
java:163)
at jsp_servlet.__ngprocessloaderror._jspService(__ngprocessloaderror.jav
a:188)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:305)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispat
cherImpl.java:594)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispat
cherImpl.java:409)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:155
at jsp_servlet.__displayprocess._jspService(__displayprocess.java:414)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:6310)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Can somebody help me?
BTW I'm using WLS 8.1 sp2
Regards.
Antonio.

I tried both solutions but with no benefit. If it helps here are the FirstBPEL.bpel content and the FirstBPEL.wsdl
BEGIN FirstBPEL.bpel -----------------------------
<process name="FirstBPEL" targetNamespace="http://acm.org/samples" suppressJoinFailure="yes" xmlns:tns="http://acm.org/samples" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:ns0="http://www.openuri.org/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns1="urn:MSGSenderService">
     <partnerLinks>
          <partnerLink name="client" partnerLinkType="tns:FirstBPEL" myRole="FirstBPELProvider" partnerRole="FirstBPELRequester"/>
          <partnerLink name="msgWs" partnerRole="MSGSenderServiceProvider" partnerLinkType="ns1:MSGSenderServiceLink"/>
     </partnerLinks>
     <variables>
          <variable name="input" messageType="tns:FirstBPELRequestMessage"/>
          <variable name="output" messageType="tns:FirstBPELResponseMessage"/>
          <variable name="msgInput" messageType="ns1:MSGSenderService_sendMsg"/>
          <variable name="msgOutput" messageType="ns1:MSGSenderService_sendMsgResponse"/>
     </variables>
     <sequence>
          <receive createInstance="yes" name="request" partnerLink="client" portType="tns:FirstBPEL" operation="initiate" variable="input"/>
          <assign name="assignInput">
               <copy>
                    <from variable="input" part="payload" query="/tns:FirstBPELRequest/tns:from">
                    </from>
                    <to variable="msgInput" part="String_1"/>
               </copy>
               <copy>
                    <from variable="input" part="payload" query="/tns:FirstBPELRequest/tns:to">
                    </from>
                    <to variable="msgInput" part="String_2"/>
               </copy>
               <copy>
                    <from variable="input" part="payload" query="/tns:FirstBPELRequest/tns:body">
                    </from>
                    <to variable="msgInput" part="String_3"/>
               </copy>
               <copy>
                    <from variable="input" part="payload" query="/tns:FirstBPELRequest/tns:la">
                    </from>
                    <to variable="msgInput" part="String_4"/>
               </copy>
          </assign>
          <invoke name="forward" partnerLink="msgWs" portType="ns1:MSGSenderService" operation="sendMsg" inputVariable="msgInput" outputVariable="msgOutput"/>
          <sequence name="main">
               <assign name="assignOutput">
                    <copy>
                         <from variable="msgOutput" part="result">
                         </from>
                         <to variable="output" part="payload" query="/tns:FirstBPELResponse/tns:msgId"/>
                    </copy>
               </assign>
               <invoke name="callback" partnerLink="client" portType="tns:FirstBPELCallback" operation="onResult" inputVariable="output"/>
          </sequence>
     </sequence>
</process>
END FirstBPEL.bpel -------------------------------
BEGIN FirstBPEL.wsdl -----------------------------
<?xml version="1.0"?>
<definitions name="FirstBPEL"
targetNamespace="http://acm.org/samples"
xmlns:tns="http://acm.org/samples"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
>
<types>
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://acm.org/samples"
xmlns="http://www.w3.org/2001/XMLSchema"
>
<element name="FirstBPELRequest">
<complexType>
<sequence>
<element name="from" type="string" />
<element name="to" type="string" />
<element name="body" type="string" />
<element name="la" type="string" />
</sequence>
</complexType>
</element>
<element name="FirstBPELResponse">
<complexType>
<sequence>
<element name="msgId" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="FirstBPELRequestMessage">
<part name="payload" element="tns:FirstBPELRequest"/>
</message>
<message name="FirstBPELResponseMessage">
<part name="payload" element="tns:FirstBPELResponse"/>
</message>
<portType name="FirstBPEL">
<operation name="initiate">
<input message="tns:FirstBPELRequestMessage"/>
</operation>
</portType>
<portType name="FirstBPELCallback">
<operation name="onResult">
<input message="tns:FirstBPELResponseMessage"/>
</operation>
</portType>
<plnk:partnerLinkType name="FirstBPEL">
<plnk:role name="FirstBPELProvider">
<plnk:portType name="tns:FirstBPEL"/>
</plnk:role>
<plnk:role name="FirstBPELRequester">
<plnk:portType name="tns:FirstBPELCallback"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
END FirstBPEL.wsdl -------------------------------

ADS: com.adobe.ProcessingException: Class not found exception while loading

Hi All,
While i'm trying to activate FORM (Interactive Form in Transaction SFP), i'm getting error -
ADS: com.adobe.ProcessingException: Class not found exception while loading class SAPForm, classpath: /usr/sap/AHS/DVEBMGS00/exe/jstart7 1.jar/usr/sap/AHS/DVEBMGS00/exe.
Could anyone let me know the way to resolve this issue.
Thanks and Regards,
Sunil

Many Thanks for the reply-It's working now
I added the MySQL connector in the following manner
1)Open the Tom Cat server console by Selecting 'Servers' in Package Explorer
2)Right Click 'Tomcat v5.5 at localhost.server'
3)Select 'Open Launch Configuration' under 'General Information'
4)Select the 'Classpath' tab in the Edit configuration window that opens
5)Select 'Add External Jars' and add the required connector

SendScenarioEvent throwing exception while doing AddToCart

Hi
I am getting the following exception while doing an addToCart.
21:03:53,678 ERROR [CartFormHandler]
CAUGHT AT:
CONTAINER:atg.commerce.CommerceException: error adding to order; SOURCE:CONTAINER:atg.service.pipeline.RunProcessException: An exception was thrown fr
om the context of the link named [sendMessage].; SOURCE:java.lang.IllegalStateException: [com.arjuna.ats.internal.jta.transaction.arjunacore.syncsnota
llowed] [com.arjuna.ats.internal.jta.transaction.arjunacore.syncsnotallowed] Synchronizations are not allowed! Transaction status isActionStatus.ABORT
_ONLY
at com.xxx.commerce.order.purchase.XPurchaseProcessHelper.addItemsToOrder(XPurchaseProcessHelper.java:127)
While debugging the code i see that the commerce items are getting created fine, but when the "runProcessSendScenatioEvent" is being called its throwing this exception.
If i comment this piece of code then i dont get any exception but then i dont see a commerce item in the cart.
Any help is appreciated.

Thanks Gautam!
i switched on the logs for PurchaseProcessHelper and found the following
02:06:45,525 INFO [PurchaseProcessHelper] DEBUG runProcess called with chain ID = repriceOrder
02:06:45,526 INFO [PurchaseProcessHelper] DEBUG PipelineError: key=PriceOrderTotalError; error=No price could be found in priceList listPrices for pr
oduct p25059 and sku 25059
02:06:45,526 INFO [PurchaseProcessHelper] DEBUG runProcess called with chain ID = sendScenarioEvent
But i can see the price for the sku 25059 in the listPrices pricelist.
I am not sure why it is throwing this error.
So all i m doing is creating a configurableCommerceItem and adding a SubSkuCommerceItem to it, and then the OOB chains are getting called.
I have debugged the code and dont find any errors in creating of commerce item or the sub sku commerce item.
If i comment the "runProcessRepriceOrder" chain then the commerce item and subsku commerce item are getting generated fine and i can see it in the order in ACC.

Exception while loading properties from an xml file

Hi all,
I've got a problem while loading properties from an XML file:
java.lang.ClassCastException: org.apache.xerces.dom.DeferredCommentImpl cannot be cast to org.w3c.dom.Element
ERROR - Cannot load properties from the specified file <./conf/login.prop> java.lang.ClassCastException: org.apache.xerces.dom.DeferredCommentImpl cannot be cast to org.w3c.dom.Element
     at java.util.XMLUtils.importProperties(XMLUtils.java:97)
     at java.util.XMLUtils.load(XMLUtils.java:69)
     at java.util.Properties.loadFromXML(Properties.java:852)
     at g2.utility.HRPMProperties.<init>(HRPMProperties.java:78)
     at g2.utility.HRPMProperties.getInstance(HRPMProperties.java:94)
     at g2.gui.workers.ApplicationSwingWorker.<init>(ApplicationSwingWorker.java:36)
     at g2.main.Main.main(Main.java:37)but this code worked before, and I've got the xerces and xercesImpl packages in the classpath, anyone can give me an hint on how to fix the problem?

Here there's the code that instantiates the HRPMProperties object loading the property file:
public class HRPMProperties extends Properties {
     * A reference to myself.
    protected static HRPMProperties mySelf = null;
     * The property file to which load the configuration.
    protected static String propertyFile = "./conf/login.prop";
      * A set of static strings used as keys in the properties file.
     public final static String DATABASE_URL = "database_url";
     public final static String DATABASE_USERNAME = "database_username";
     public final static String DATABASE_PASSWORD = "database_password";
     public final static String REAL_USERNAME = "real_username";
     public final static String REAL_PASSWORD = "real_password";
     public final static String PHANTOM_LOGIN = "login_thru_phantom_user";
     public final static String AUTOCONNECT = "autoconnect";
     public final static String TRANSLATION_FILE = "translation_file";
     * Builds up an empty properties map.
    protected HRPMProperties(){
     super();
     this.reload();
     * Builds up the property map from the specified input file. <B> The file must be in XML format</B>.
     * In case of exception and/or problems reading from the specified file, an empty property map is returned.
     * @param fileName the path and the name of the file with the XML representation of the properties.
    protected HRPMProperties(String fileName){
     super();
     try{
         this.loadFromXML(new FileInputStream(fileName));
     }catch(Exception e){
         Logger.error("Cannot load properties from the specified file <"+fileName+"> " + e);
         e.printStackTrace();
     * Provides an instance of the property class loaded from the default configuration file.
     * @return the property instance
    public static final HRPMProperties getInstance(){
     if( HRPMProperties.mySelf != null )
         return HRPMProperties.mySelf;
     else{
         HRPMProperties.mySelf = new HRPMProperties(HRPMProperties.propertyFile);
         return HRPMProperties.mySelf;
}The constructor is the one triggering the exception, so there's a problem loading the XML property file.

Exception while loading jars

Hello. Sometimes when starting applet I get exceptions during loading:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://gier.gamepoint.net/games/common-images-lobby_20110907_2_cleaned.jar.pack.gz
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     ... java internal classes
     at java.lang.Thread.run(Unknown Source)
Caused by:
java.io.IOException: Corrupted pack file: magic/ver = CAFED00D/0.0 should be CAFED00D/150.7 OR CAFED00D/160.1
     at com.sun.java.util.jar.pack.NativeUnpack.start(Native Method)
         ... java internal classes
     at java.lang.Thread.run(Unknown Source)or
some exception
Caused by: java.io.IOException: Pipe is already shut down
     at sun.plugin2.message.Pipe.checkForShutdown(Unknown Source)
     at sun.plugin2.message.Pipe.receive(Unknown Source)
     ... 8 moreand after that JVM exits. But after I press F5 the same applet is being loaded correctly.
So question is: is there any possibility to handle exceptions during loading so I can call javascript to reload applet?

It's nasty, but problem is that exceptions are absolutely random: first one I got only once, second with "Pipe is already shut down" I get more regularly but again without any pattern (and I never got it in IE, only Firefox). And my co-worker for example never got any of them. So it's sort of workaround for unexpected behavior and I'd be grateful if you tell me how to detect exceptions using javascript.
But anyway we load applet using JNLP with "progress-class" and using pack200 for some jars.

Throws exception while saving SCREEN DATA when integrated with CRMOD & OPA

I have integrated CRMOD with OPA and able to see my screens and enter data and review after submitting screen data, but when I click "Save" on TOP right of the Applet Test page throws below exception. Please help
===================================================================
0 [Thread-2] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
21 [Thread-2] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
91903 [http-8080-1] INFO com.oracle.determinations.web.crmod.config.ConnectorProperties - Config File path : configuration/crmod-data-adapter.properties
91934 [http-8080-1] INFO com.oracle.determinations.web.crmod.plugins.CrmodAdapter - Found mapping file ScreeningInterview-mapping.xml.
92045 [http-8080-1] INFO com.oracle.util.plugins.PluginRegistry - Successfully created instance of plugin: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
92045 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - Data adaptor plugin ( class com.oracle.determinations.web.crmod.plugins.CrmodAdapter ) found - attaching to session.
92045 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No Commentary plugin supplied - using default
92049 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No List provider supplied - using default
92051 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No DocGen plugin supplied - using default
175526 [http-8080-1] ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [Missing or unparsable CaseId.]
com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [Missing or unparsable CaseId.]
     at com.oracle.determinations.web.crmod.plugins.CrmodAdapter.save(CrmodAdapter.java:95)
     at com.oracle.determinations.web.platform.controller.actions.SaveAction.doSave(SaveAction.java:133)
     at com.oracle.determinations.web.platform.controller.actions.SaveAction.getResource(SaveAction.java:61)
     at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doGet(WebDeterminationsServlet.java:80)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:861)
     at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579)
     at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1584)
     at java.lang.Thread.run(Unknown Source)
========== MY ADAPTER PROPERTIES FILE : crmod-data-adapter.properties HAS BELOW DATA ============
## REQUIRED SETTINGS
## Properties for CRMOD Web Services
web-service-url                         =https://secure-ausomxapa.crmondemand.com/Services/Integration
## Supports WS1.0 and WS2.0
web-service-version                    =1.0
## Properties for Authentication
## Username and password must be encrypted using configuration-encrypter tool provided by the product.
## Please refer to Configuring CRM On Demand Connector for Web Determinations of Developer Help for more details.
username                              =Y3JtaXQtZGVtby9jcm1pdA==
password                              =T25EZW1hbmQ=
## OPTIONAL SETTINGS
## Set fixed-authentication to false if you want to implement other forms of authentication
fixed-authentication                =false
## Properties for the mapping file
mapping.load.from.rulebase           =true
## Set the mapping path if load from rulebase is set to false e.g. /configuration/mapping
mapping.location.path               =/configuration/mapping
========= MY Custom Web APPLET URL in CRMOD HAS BELOW ===============
http://localhost:8080/crmod-web-determinations?caseID=new

On Save click getting below error from CRMOD:
9816032 [http-8080-1] ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [SOAP Response Parser: CRM On Demand errors found in the SOAP request for saving.
Internal Error: Session is not available. Aborting.]
com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [SOAP Response Parser: CRM On Demand errors found in the SOAP request for saving.
Internal Error: Session is not available. Aborting.]
=============
Phil Whitwell | Director Product Strategy Advised as to check SOAP Request using TCPMon. Then I followed the below steps:
Step 1) changed URL entry in crmod-data-adapter.properties file
## Properties for CRMOD Web Services
web-service-url =http://localhost:5049/Services/Integration
# earlier entry
#web-service-url =https://secure-ausomxapa.crmondemand.com/Services/Integration
Step 2) Restarted TOMCAT6
Step 3) Started TCPMon after setting tcpmon port as below
[My Tomcat is listening on 8080, I cannot bind tcpmon to listen there as well. the way to use tcpmon correctly is to set the target port to 8080 and set the listen port to some currently unused port (say 5049) and Setup My client – CRMOD As mentioned in Step 1]
Step 4) I got below SOAP Request XML after executing “SAVE” in CRMOD .
Below SOAP Request XML sent on “SAVE” option from CRMOD:
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="urn:crmondemand/ws/account/10/2004" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header />
- <SOAP-ENV:Body>
- <ns:AccountWS_AccountInsert_Input>
- <ListOfAccount>
- <Account>
<Location>UK</Location>
<AccountName>Phil</AccountName>
<Industry>BFSI</Industry>
</Account>
</ListOfAccount>
</ns:AccountWS_AccountInsert_Input>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
=======================================================
What is incorrect in the above SOAPRequest.xml, why CRMOD is throwing an error on "SAVE",
Can someone please advice?

Help,My vc2003 can not work with indesign debug version

Hello everyone, I am a new developer of Indesign plugin, recently I got the problem as follows:
I use vc2003 to open the SDK provided project, and click F5, then selected the Indesign as the programm to load this plug-in. However Indesign did not load the plugin and further more, non of the break-points I setted in the programm worked. It was very strange!
Any one can help me? Thank you very much!

Thank you very much for your reply!
I had solved the problem.
If you just put the plugin in the app's plugin folder, the VC2003 would be unable to work with your indesign.
In order to debug my plugin with VC2003 and indesign, I edit the file in %Documents and Settings%\%user%\Application Data\Adobe\InDesign\Version 4.0 which named PlugInConfig, copy the PlugInConfig.out and renamed it as PlugInConfig.txt and Dlelte the content then add the following lines:
=Path
"your custome plugin folder".
Problem solved!:)

Java Client throws exception while sending NTLMV2 Response from WIN7 to W

We have written a Java client which connects to a webservices application using NTLM authentication against Windows 2008 R2 Server (using IIS7). This program works fine when running from Windows XP, Linux but failing when running from Windows 7.
Error encountered is: java.io.IOException: Authentication failure.
Here is what we have written to connect to HTTPS with credential using SSLContext as mentioned below.
SSLContext sc = SSLContext.getInstance( "SSL" );
sc.init( null, trustAllCerts, new java.security.SecureRandom() );
HttpsURLConnection.setDefaultSSLSocketFactory( sc.getSocketFactory() );
( ( HttpsURLConnection )( m_oHttpURLConnection ) ).setHostnameVerifier( this );
URL url = new URL("https://testsite...");
HttpsURLConnection m_oHttpURLConnection = (HttpsURLConnection) url.openConnection();
Following properties are set to HttpsURLConnection:
RequestMethod : GET
InstanceFollowRedirects : true
AllowUserInteraction : true
UseCaches : false
DoOutput : true
DoInput : true
After setting all the above parameters the following code is used to set credentials data and connect to site
Authenticator.setDefault(new MyAuthenticator ());
m_oHttpURLConnection.connect();
After connection is successful request XML is sent to server and expecting a response from the server. So when the below line is called exception is thrown.
m_oHttpURLConnection.getResponseCode();
Exception :
java.io.IOException: Authentication failure
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1173)
     at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(HttpsURLConnectionImpl.java:318)
After changing LAN Manager Authentication level setting of Windows 7 from Send NTLMv2 response only to Send LM & NTLM use NTLMv2 session security if negotiated, application is working fine.
Local Security Settings àSecurity SettingsàLocal Policies à Security Optionsà Network security: LAN Manager Authentication level
By default in Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2: Send NTLMv2 response only , Lowering the security level at the client end is bit risk and typically is not recommended.

this subforum is about Kerberos and GSS and not about NTLM. Why are you hasseling with NTLM? Take Kerberos.

Oracle EBS throwing exception while invoking the web service

Hi,
When I try to invoke the web service through SOAPUI it is working perfectly fine. however when I try to call it using a .net client. I am getting the below exception:
oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: System ErrorServiceGenerationError: Error in Creating Response MessageServiceGenerationError: Error in getting translated error messagenull.
Please help me.
Thanks,
Manish

Hi Manish,
Please check notes:
R12.1.1: ISG BPEL Calls Results in java.net.sockettimeoutexception & oracle.apps.fnd.soa.util.SOAException (Doc ID 1103755.1)
"Error in getting translated error messagenull" When Invoking a web service from SOAP UI (Doc ID 1507313.1)
Thanks &
Best Regards,
Asif

Exception while loading data into the cache

I'm getting the following error while attempting to pre-populate the cache:
2010-11-01 16:27:21,766 ERROR [STDERR] (Logger@9229983 n/a) 2010-11-01 16:27:21.766/632.975 Oracle Coherence EE n/a <Error> (thread=DistributedCache, member=1): SynchronousListener cannot be added on the service thread:
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$BinaryMap.addMapListener(PartitionedCache.CDB:14)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.addMapListener(PartitionedCache.CDB:1)
     at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:27)
     at com.tangosol.net.cache.CachingMap.registerListener(CachingMap.java:1463)
     at com.tangosol.net.cache.CachingMap.ensureInvalidationStrategy(CachingMap.java:1579)
     at com.tangosol.net.cache.CachingMap.registerListener(CachingMap.java:1484)
     at com.tangosol.net.cache.CachingMap.get(CachingMap.java:487)
     at com.jpm.ibt.primegps.cachestore.AbstractGpsCacheStore.isEnabled(AbstractGpsCacheStore.java:54)
     at com.jpm.ibt.primegps.cachestore.AbstractGpsCacheStore.store(AbstractGpsCacheStore.java:83)
     at com.tangosol.net.cache.ReadWriteBackingMap$CacheStoreWrapper.store(ReadWriteBackingMap.java:4783)
     at com.tangosol.net.cache.ReadWriteBackingMap$CacheStoreWrapper.storeInternal(ReadWriteBackingMap.java:4468)
     at com.tangosol.net.cache.ReadWriteBackingMap.putInternal(ReadWriteBackingMap.java:1147)
     at com.tangosol.net.cache.ReadWriteBackingMap.put(ReadWriteBackingMap.java:853)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.put(PartitionedCache.CDB:98)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onPutAllRequest(PartitionedCache.CDB:41)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$PutAllRequest.onReceived(PartitionedCache.CDB:90)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:33)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.CDB:3)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.CDB:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
2010-11-01 16:27:21,829 ERROR [STDERR] (pool-14-thread-3) Exception in thread "pool-14-thread-3"
2010-11-01 16:27:21,829 ERROR [STDERR] (Logger@9229983 n/a) 2010-11-01 16:27:21.766/632.975 Oracle Coherence EE n/a <Error> (thread=DistributedCache, member=1): Assertion failed: poll() is a blocking call and cannot be called on the Service thread
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:5)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$BinaryMap.get(PartitionedCache.CDB:26)
     at com.tangosol.util.ConverterCollections$ConverterMap.get(ConverterCollections.java:1559)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.get(PartitionedCache.CDB:1)
     at com.tangosol.coherence.component.util.SafeNamedCache.get(SafeNamedCache.CDB:1)
     at com.tangosol.net.cache.CachingMap.get(CachingMap.java:491)
     at com.jpm.ibt.primegps.cachestore.AbstractGpsCacheStore.isEnabled(AbstractGpsCacheStore.java:54)
     at com.jpm.ibt.primegps.cachestore.AbstractGpsCacheStore.store(AbstractGpsCacheStore.java:83)
     at com.tangosol.net.cache.ReadWriteBackingMap$CacheStoreWrapper.store(ReadWriteBackingMap.java:4783)
     at com.tangosol.net.cache.ReadWriteBackingMap$CacheStoreWrapper.storeInternal(ReadWriteBackingMap.java:4468)
     at com.tangosol.net.cache.ReadWriteBackingMap.putInternal(ReadWriteBackingMap.java:1147)
     at com.tangosol.net.cache.ReadWriteBackingMap.put(ReadWriteBackingMap.java:853)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.put(PartitionedCache.CDB:98)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onPutAllRequest(PartitionedCache.CDB:41)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$PutAllRequest.onReceived(PartitionedCache.CDB:90)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:33)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.CDB:3)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.CDB:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
2010-11-01 16:27:21,922 ERROR [STDERR] (pool-14-thread-3) (Wrapped: Failed request execution for DistributedCache service on Member(Id=1, Timestamp=2010-11-01 16:20:09.372, Address=169.65.134.90:7850, MachineId=28250, Location=site:EMEA.AD.JPMORGANCHASE.COM,machine:WLDNTEC6WM754J,process:5416) (Wrapped: Failed to store key="9046019") poll() is a blocking call and cannot be called on the Service thread) com.tangosol.util.AssertionException: poll() is a blocking call and cannot be called on the Service threadI'm a bit stumped as my code doesn't call poll() anywhere and this appears to be caused by the following in my CacheStore class:
public void store(Object key, Object value) {
        log.info("CacheStore currently " + isEnabled());
        if (isEnabled()) {
            throw new UnsupportedOperationException("Store method not currently supported");
public boolean isEnabled() {
        return ((Boolean) CacheFactory.getCache(CacheNameEnum.CONTROL_CACHE.name()).get(ENABLED)).booleanValue();
    }the only thing I can think of is maybe it has a problem calling a cache from within a CacheStore (if that makes sense). What I have is a CONTROL_CACHE which just stores a boolean value to indicate whether the store(), storeAll(), erase(), and eraseAll() methods should do anything. Is this correct?

Hi Jonathan,
I am trying to implement a write-behind cache but my configs may be wrong. The config for the cache with the cachestore looks like:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd" >
<cache-config>
     <caching-scheme-mapping>
     <cache-mapping>
          <cache-name>PARTY_CACHE</cache-name>
          <scheme-name>party_cache</scheme-name>
     </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <near-scheme>
               <scheme-name>party_cache</scheme-name>
               <service-name>partyCacheService</service-name>
               
               <thread-count>5</thread-count>
               <front-scheme>
                    <local-scheme>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <distributed-scheme>
                         <backing-map-scheme>
                              <read-write-backing-map-scheme>
                                   <internal-cache-scheme>
                                        <local-scheme>
                                        </local-scheme>
                                   </internal-cache-scheme>
                                   <cachestore-scheme>
                                        <class-scheme>
                                             <class-name>spring-bean:partyCacheStore</class-name>
                                        </class-scheme>
                                   </cachestore-scheme>
                              </read-write-backing-map-scheme>
                         </backing-map-scheme>
                    </distributed-scheme>
               </back-scheme>
               <autostart>true</autostart>
          </near-scheme>
     </caching-schemes>
</cache-config>and the control cache config looks like:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd" >
<cache-config>
     <caching-scheme-mapping>
     <cache-mapping>
          <cache-name>CONTROL_CACHE</cache-name>
          <scheme-name>control_cache</scheme-name>
     </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <near-scheme>
               <scheme-name>control_cache</scheme-name>
               <service-name>controlCacheService</service-name>
               
               <thread-count>5</thread-count>
               <front-scheme>
                    <local-scheme>
                         <high-units>100</high-units>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <distributed-scheme>
                         <backing-map-scheme>
                              <read-write-backing-map-scheme>
                              </read-write-backing-map-scheme>
                         </backing-map-scheme>
                    </distributed-scheme>
               </back-scheme>
               <autostart>true</autostart>
          </near-scheme>
     </caching-schemes>
</cache-config>They have different service names but I'm guessing this isn't what you mean and I thought I was using write-behind but again I'm guessing my config is not correct?

Unable to load the Vertipaq engine because there was a COM exception while loading

I saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
   at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
   at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong Lee

I saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
   at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
   at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong Lee

[Help] Weblogic throws exception under load testing

Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek.

Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek.

Exception while loading an Applet

I am getting the attached exception when trying to access a page containing an applet. The same page displays fine when tried from a different machine
Java Plug-in 1.5.0_11
Using JRE version 1.5.0_11 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\106765
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class AdvanceStockReachApplet not found.
java.lang.ClassNotFoundException: AdvanceStockReachApplet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
java.lang.ClassNotFoundException: AdvanceStockReachApplet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Is there any browser/system specific setting that needs to be done for the same

Hi,
TechWizard1 wrote:
I am getting the attached exception when trying to access a page containing an applet. The same page displays fine when tried from a different machine
load: class AdvanceStockReachApplet not found.
java.lang.ClassNotFoundException: AdvanceStockReachAppletHave you tried to write the class file resource with the suffix .class in the code Attribute of the APPLET Element or the code PARAM of the OBJECT Element?
<APPLET CODE="AdvanceStockReachApplet.class" ...Just a guess. Otherwise, what are the differences between those machines?
greetings
Axel
greetings

Indesign debug version(64 bit) throws exception while loading pluggin

Similar Messages

Maybe you are looking for