Index doesn't auto select

We just updated to RoboHelp for Word to generate WebHelp.
When I compile the help and run the results (in a browser) typing
in the index field jumps to the first match in the index list.
However, when the same files are put in the application, typing in
the list doesn't jump to the first match. We got a number of
complaints from customers, so I was hoping it would be fixed in 7.
No such luck. Is it something I'm doing?
Phil

Oops. Let me clarify. We just updated from RoboHelp 6 to
RoboHelp 7 and we use RoboHelp for Word to generate WebHelp.
We don't use WebHelp by choice - it's all that's left.
WinHelp can't be use on Windows Vista and HTMLHelp can't be used
over a network. I hate WebHelp but we have no choice.
Our software has been in use by customers for over 20 years.
We started writing this help LONG before RoboHelp existed. We
started out with our own DOS based help system and converted to
HelpBreeze when Windows came around. We outgrew it however and
RoboHelp was a good migration path since both HelpBreeze and
RoboHelp are Word-based. I tried using RoboHelp's Word to HTML
project conversion, but it didn't transfer any build tags. A.K.A. -
completely useless. I haven't tried it with RH7 yet. Maybe it's
better.
How does one call WebHelp from an application that will have
any effect at all on the way the index works? Even more
fundamentally - how does one affect the way the index works at all?
I'm just calling RH_ShowHelp(). There isn't a whole lot more I can
or can't do.
Phil

Similar Messages

BT headset pairs and connects, but doesn't auto-select

I'm posting this hear because I'm using Gnome front-ends to negotiate the bluetooth profiles/etc, but I know that it might be bluez or PulseAudio that's "faulty" here. That said...
I've got a pair of bluetooth headphones that work great. They pair, connect, and play audio just fine. However, once they've connected, I have to go into the audio settings dialog and select them over the default "Digital Output" device. It's the epitome of first world problems, but I kind of expect Gnome to figure out that the headset is the intended destination for audio streams, much like it does when you plug headphones in.
So, what's missing? I found some lengthy discussion on potential bugs in Ubuntu 12.04 when I Googled for this, but they seem to blame bluez < 5.0, whereas I'm running bluez 5.28-1.
Thanks in advance.

You could enable pulseaudio's "switch-on-connect" module, as per wiki. This means that once a new audio device is connected, all audio input will be routed to it.

Auto selection of file from folder during uploading??

Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
Bikash

Hi Chandan,
                    All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
     wa_tab TYPE file_table,
       lw_file LIKE LINE OF it_tab,
       gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
   file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = file_str1
*    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
   tables
     data_tab                      = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.

Auto-select clip under playhead? (for color correction)

Hi all
Another newbie question concerning color correction in FCS2.
When moving from clip to clip in the timeline, the viewer (which contains the 3-way color correction filter) doesn't refresh until I remember to double-click on the current clip to select it. In other words, if I change a filter on one clip, then move in the timeline to the next clip, the viewer still contains the previous clip's filter, and if I forget, I'll start fiddling with it, thinking I'm now looking at the current clip.
Still with me?
So, my question is, is there an "auto-select" feature whereby, as I move my playhead along the timeline, clips on a selected track (eg V1) will automatically get selected and loaded into the viewer?
I know there is an auto-select feature for tracks, which I've enabled for my video track, but it doesn't seem to be meant for what I want.
Thanks!
Matt

If you set the SYNC to OPEN, what is being played in the time line (and displayed in the Canvas view) will also be displayed in the Viewer.
Just a point of clarification - the Viewer doesn't hold the CC filter, it will only display the filters that have already been applied to currently displayed clip. If the next clip displayed in the viewer has not had the 3way CC applied, the 3way CC won't display as part of the filters on that clip.
Good luck,
x

Auto select new item in tree

Hi
I have a tree that i allow user to drag and drop items to it - what is the easiest way so the new item is automatically selected? ie, tree.selectedIndex should point to the new item's index.
Unfortunately it thought this was easy apparently it was not - like if the nodes in the tree control are collapsed, the selectedIndex is different than when all the nodes are expanded.
Do note that the way i populate my tree is through a data provider - so i populate a class that would become the tree's data provider, so when the tree refreshes, i simply do this:
myTree.dataProvider = project.p;
I can track where my new item was inserted in my "project" instance - but like i said earlier, the tree itself have different selectedIndex when the nodes are collapsed and when they are not.
THanks

Hi,
I just posted a demo and source code on my blog: Auto select New Item in Tree component
In above example i use loopAndFind() custom function.
Hope it helps!
Mariush T.
Blog: http://mariusht.com/blog/

Can a Journal status be changed so it doesn't get selected for posting?

When a new journal is created, can we change the status so it doesn't get selected for posting by teh Auto-Post program. We can't set this in the Auto-Post program as we use the same Category and Source for creating other journals which need to go through the Auto-Post program. Is there a control at the journal level which can stop it from getting posted?

Welcome to the Apple Community.
Whether you are using iTunes Match or not, you can and always have been able to put as little or as much on your devices as you choose.

Auto select hex number via color picker

Hey everyone,
Why is it that on some versions of cs6 when i select the "set foreground color" (or background), the color dialog pops up with the hex number selected allowing me to quickly ctrl+c it. However, on other computers - with the exact same copy of photoshop (cloud based and fully updated) it does *not* auto select the hex number. I've looked through the settings to see if this is a feature that needs to be turned on/off but could not find it....
Any one have any idea on how i could turn this on for all my workstations?

In the case of the CS6 Mac edition, auto selection of the Hex field was implemented in the 13.1/13.02 Retina updates. Check Photoshop CS6 on the problem workstations to be sure they are updated.
On Windows versions of CS6,be sure to single-click on the foreground swatch. Double-clicking it removes the Hex selection.
That's about all I can think of, so if this doesn't help...I'll leave this to more experienced users, MVPs, and Staff.
Gene

Auto-select precision in Photoshop CS6 is incredibly frustrating

I have been using CS6 for a while now and one problem that I keep encountering is the auto-selection of shape layers. Trying to auto-select a layer that's within 10 pixels of a shape layer is impossible without having to zoom in. This is a little hard to explain without images... Cue image...
If you try to recreate the above image, where the black 20x20px rectangle is a shape and the red 38x38px rounded rectangle is rasterized pixels, you will see that auto-selecting the red rounded rectangle is impossible at 100%.
Is this intentional and just an issue for me? Selecting pixel layers in CS5 was never this annoying. It seems that shape layers have an invisible 10px area around them stopping you from selecting anything below them. This is so frustrating with pixel UI work.
I have hunted for a solution but haven't yet found one and there doesn't seem to be any options to disable either. Any help or insight would be greatly appreciated.
Billy

A good example of why mixing Mac and PC in the same thread can be so confusing.
My comment here is merely to indicate what I see when I do the various functions described. I have no position as to a bug or whatever.
When I Ctrl-Left click on the Layers palette, I indeed get to select any or all the layers, including linking them up which then shows up when you Ctrl-Right Click on the image. At that point I can revert to a particular layer, if I wish.
I have not been aware of this function, and as it stands, appears to be a useful function. It moves things along better for my work. However, I seldom use Layers for other than Adjustment so the OP's problem would not show.
Too bad I have uninstalled CS5. It would be interesting to see the difference.
So far as changes affecting power users, see the new (Ugh!) crop tool. I have many more steps to take to do a simple crop, and the result to my workflow similar to Billy's. Try to crop 10px off the bottom or sides of an image and know you nailed it without having to deselect the tool to get rid of the (no longer martching) ants.

Move tool layer context menu acting differently to "Auto Select"?? (using 12.0.4)

Okay,
This is weird. I've just updated my mac photoshop to 12.0.4 and I'm finding that, when using the Move Tool and right/command clicking on an object, the context menu that pops up isn't selecting the right layer?
To be clear, it is highlighting a layer (this is not the initial Photoshop 12.0 bug that drove everyone mad until the update) but it's the wrong one? Results vary depending on where I'm clicking, sometimes it's "close" to the layer I want, say the group it's nested within, other times it's a million miles off.
Yet when I switch on "Auto Select" it's pin-point accurate again? It's like the brain has dropped out of my context menu and it doesn't know what to select.
Obviously I can keep switching "Auto Select" on, but that's an annoying change to my work flow and will slow me down no end. Mores to the point, clearly something is up here.
I've updated to 12.0.4 on my home imac (on 10.5.8 OSX if that helps) but I've been using 12.0.3 (possibly 12.0.2) in the studio where I work and never noticed this issue, it's just now after updating to 12.0.4 at home i'm noticing this weirdness.
Anyone have any ideas, I'm at a loss.
Thanks in advance people,
G

To reset the tool I suggest click on it once and then look for something like this in the bottom half of your window:
In the above picture I have marked one section in red box. You need to click on it to get the option to either reset the only tool you have clicked or to reset all the tools in the editor window. Of course you have to be in Expert Mode to get this to work.
Good luck.

How to make Logic auto-select channel when external instrument is selected?

I recently upgraded hardware and now have to upgrade the OS 9 software (MOTU FreeStyle) I've been using and join the 21st century. I asked a Guitar Center employee about what package to buy and stressed that I wanted the software to auto-select the midi channel since that was a major benefit (for me) in using FreeStyle. I was informed that all of the newer DAW software did this (which made sense to me, after all FreeStyle was already at least 10 years old, although no longer under development (hence OS 9.) Logic Express was specifically recommended.
Sadly, I don't see this capability in Logic Express. I don't understand why, if I have 15 instruments set up, and I select a new one, I have to manually look at each of the other instruments (assuming I don't have their channels memorized) and see what channels have been used so that I don't accidentally reuse the same one for the new instrument. Doesn't the computer already know what channels are unused??
In FreeStyle could have 25 instruments set up for a 16 channel keyboard, and as long as there was never more than 16 voices playing at any particular time, the software just managed the channels for me. I don't know what happens if you go over 16 for a 16 channel instrument, I don't think I ever did (I never had voices cut out anyway.)
Not to berate Logic Express, there's lots of cool stuff in it that I'm looking forward to exploring, and it sounds like you have to jump through hoops even to get MOTU's Digital Performer to emulate the same behavior and I suspect it's as much of a hassle to set it up as to just do it on the fly (from previous experience of "what a salesman says" vs. "what is real.") I'm just trying to figure out how to make the computer do the computer work so that I can do the music work.
I have lots of partial (and even some complete!) projects to port over and not nearly as much spare time as I'd like to spend playing. I'd rather spend my meager spare time composing, not fighting with the technology.
Any ideas?
Thanks,
-David

Hi bunker,
I can't test it at the moment but I think that can be achieved by slightly changing the code like so:
*<script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.min.js"></script>*
*<script type="text/javascript">*
*$(document).ready(function(){*
*$("td.GFPFilter span input").focus(function(event){*
this.select();
this.value = '';
*</script>*
Also, if you found my posts helpful or correct could you apply those labels to the relevant posts?
Cheers,
J
Edited by: J Kremer on 20-Apr-2011 19:23
Edited by: J Kremer on 20-Apr-2011 19:30

Batch handle with 'Auto Select' option

Hello Everyone!
We are trying to find out how the 'Auto Select' button works with batch handle.
Our customer wants to handle batches by FIFO.
We need to try if it is possible to 'Auto Select' batches by 'Admission Date'. Even when we found out that it is possible SBO does not do it rightly, because not always get well organized by 'Admission Date'.
Somebody knows which logic uses the 'Auto Select' option to select batches?
There is some configuration at SBO to handle batches by 'Admission Date'?
Thanks a lot!

The batch auto selection selects the batches according to the ascending alphanumeric order. To issue based on FIFO method, user has to identify the admission date/ manufacturing date of the batch and issue.
There is No configuration at SBO to handle batches by 'Admission Date'.
As a workaround you can use the batches to startwith 'Admission Date'.

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

Auto Select not working in Photoshop CS6--Why?

I'm experiencing the auto-select in Photoshop CS6 not working when it is checked and I click on different layers. It worked fine in 5.5, but I am now using PS CS6 cloud and it works only sporadically. Any reason why?
Thanks in advance!
-Jane

Moving this discussion to photoshop Forum discussion.

How to Turn Off the Auto-Select Function When Clicking In a Document?

Whenever I click my cursor within any document (Mail, Text, this post) sometimes an entire word is selected (highlighted in blue) rather than the cursor just being there blinking & ready for me to type. If I click again the entire line is selected, then the whole paragraph.
This is VERY frustrating when all I want to do is place my cursor within the document to edit or begin typing. If I'm not careful and click in a document and just start typing, the auto-selected text is deleted. Yikes!
Only my Mac Mini with the Leopard OS 10.5.8 does this, not my PowerBook w. Tiger OS 10.4.11. Thanks for any advice on this.

Correct, Sig.
When I checked the Double-Click speed in prefs, it was set all the way to the left -- SLOW. When I set it half-way to the right, problem was solved. Thanks much.

PDF auto select paper tray based on paper size

* this was originally posted here: http://discussions.apple.com/thread.jspa?threadID=2586377&tstart=0 but I was informed I was in the wron g forum.
I have a Windows pc only for 1 thing - printing pdfs. My problem is that Windows printer drivers allow me to have auto select paper size/tray depending on if the pdf page is standard or legal. I have not yet found anyway to do this through the mac.
I have a Brother HD-5370 laser printer and need some assistance with the paper auto select. If any one has any suggestions or an actual fix, I am all eras.
I have used Snow Leopard, Leopard as well as 10.4 and the problem is with any pdf viewer I have tried (viewer, adobe reader, other 3rd party which names escape me). The option to auto select printing by pdf page size is selected and the drawers are set correctly. It just won't print how it's supposed to.
any sugegstions,
Dan

This has been an issue for at least 3 years now. I have checked for driver sin the past and have tried to look up answers via Brothers website - all to no solution to my problem. It just may be that Brother's printers do not have this feature. The options do show as valid options though.
The printer is currently connected to a Windows pc located on a different floor. So in order to test, I have to move the printer or the mac.

Index doesn't auto select

Similar Messages

Maybe you are looking for