India Localizaion R12 PO interface with taxes

Hi,
Please help me to provide india localization PO interface tables and details In R12.
I want to upload tax information also. Please give the tables. If documents available with you please forward it to me ([email protected])
Thanks
Prasanna

Any help pls.

Similar Messages

  • India Localization - AP - Asset Invoice with Tax Lines

    Dear Experts,
    In India Localization If I have Asset Invoice with Tax Lines and If I Perform Mass Additions will Tax Lines also Interfaced to FA or only Asset cost will be transferred FA (Excluding Tax Lines)
    Please help me out.
    Thanks
    Bharath

    Bharath,
    even though the tax lines are independently transferred to mass addition and merged ... it is merged to its owning transaction ... like if the invoice in AP is created for a capital asset using the Capital asset clearing account, the tax lines in that invoice is merged automatically to that invoice cost line in the mass addition stage ... similary for CIP clearing account ....
    Regards,
    Ivruksha

  • 11i upgrade to R12 and challenge in AP invoices interface with Vertex

    Hi,
    Right now we are in the process of upgrading our application from 11i to R12.1.3.
    During the procure to pay upgrade, We are facing a challenge in interfacing R12 Oracle Payables invoices with Vertex Q Series Tax.
    The existing vertex interface process is working in R12 till tax calculation. That is, the TAX is getting calculated by the Vertex engine.
    But after tax calculation, the existing vertex interface process is not working because of the new tables in R12 and also some oracle standard packages (bellow listed) used by this program do not exist in R12 anymore.
    ap_tax_default_pkg.get_default_tax_code
    ap_tax_recovery_pkg.get_default_rate
    ap_mrc_engine_pkg.maintain_mrc_data
    ap_mc_info.round_dist_amounts
    ap_charge_allocations_pkg
    I am seeking help in identifying the required API’s to populate the ap_invoice_lines, ap_invoice_distributions and required ZX tables.
    Please help us if you came across similar challenge or any idea on R12 AP invoices interface with Vertex Q Series.
    Thanks
    Tamilselvan

    Hi,
    I have calculated tax amounts using vertex Q. trying to find out ZX API's to populated the required ZX tables.
    Please help us if you have any idea on this matter.
    Thanks
    Tamil

  • BAPI_ACC_DOCUMENT_POST with TAX posting for FB60 t-code

    Hi Experts,
    I am trying upload the data using BAPI_ACC_DOCUMENT_POST with Tax(ACCOUNTTAX) for the FB60 t-code. But not getting right.
    Any help on this issue greatly appreciated.
    Thanks & Regards,
    Harish

    Hi,
    Check out this-
    FU BAPI_ACC_DOCUMENT_POST
    Short Text
    Accounting: Posting
    Functionality
    Using this method you can create a posing in accounting for certain business transactions.
    Possible ( Business Transactions):
    Postings that generally only affect the general ledger. (RFBU)
    Billing: For billing in Sales and Distribution, accounting is supplied with the relevant billing data. (SD00) Billing Document
    Accounting can use the data of a logistics system that result from an Invoice Receipt. (RMRP)
    Goods Movement are triggered by transactions in Sales and Distribution or by inventory postings. Within logistics, they lead to a change in the warehouse stocks of <DS:GLOS.Inventory Management>Inventory Management. This results in a posting in accounting. This is why accounting is supplied with the relevant data from logistics. (RMWA)
    Example
    Billing document:
    By selling goods in accordance with targets, revenue is generated. The revenue is posted in billing and forwarded to accounting.
    Invoice receipt:
    Raw materials are purchased in accordance with targets. The invoice receipt is posted in a logistics system. The data from the raw materials is forwarded to accounting.
    Goods Movment:
    The use of raw materials leads to a change in stock in inventory managment. The posting of raw material consumption is forwarded to accounting.
    G/L Account Posting:
    Provision posting for an expected warranty service. This can refer to acquisitions or retirements belonging to stocks that are not in subledger accounting relevant to inventory management. This is particularly the case if such materials are not displayed as vendor/customer, materials, loans etc. or cannot be displayed in this way. This can also refer to write-ups or depreciation that contain higher aggregations of values than are maintained in a corresponding subledger that is relevant to inventory management.
    The conversion of foreign currencies for receivables/payables due to large exchange rate changes that should not lead to an update of the accounts payable or accounts receivable accounting. A similar transaction can arise for the revaluation of raw materials if this revaluation takes place at a correspondingly aggreagated level.
    Reclassification of inventory of P&L statement accounts that are only used for reconcilliation purposes in the general ledger (this rearranges values for balance sheet items).
    Balance reclassifications of stocks to receivables with different return times.
    Notes
    If the parameter CurrencyAmount is filled with the currency fields, a complete document check including characteristics and value components of profitability analysis (CO-PA). Otherwise, the account assignment objects are checked.
    Messages are returned in the parameter Return. In the parameter documentation you can find the return values and their meaning.
    Further information
    You can find further information in the SAP Library under "Financials -> Accounting - General (AC) -> Interfaces to Accounting (AC)".
    Parameters
    DOCUMENTHEADER
    CUSTOMERCPD
    CONTRACTHEADER
    OBJ_TYPE
    OBJ_KEY
    OBJ_SYS
    ACCOUNTGL
    ACCOUNTRECEIVABLE
    ACCOUNTPAYABLE
    ACCOUNTTAX
    CURRENCYAMOUNT
    CRITERIA
    VALUEFIELD
    EXTENSION1
    RETURN
    PAYMENTCARD
    CONTRACTITEM
    EXTENSION2
    REALESTATE
    ACCOUNTWT
    Reward if useful!

  • Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

    Hi Guys,
    I am facing very critical issue on down Payment request, to process with saperate Tax Value.
    We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
    As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
    Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
    For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
    We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
    We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
    I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
    Below is the error message:
    Down pmnts with taxes are not permitted when processing with jur.code
    Message no. FS206

    HI Preeti,
    Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
    However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
    Did any one seen this case in your experiece, if yes, what is the work-around solution?.
    Need your help guys!,...
    Regards,
    Damodar Naidu

  • Importing Sales Order with Tax

    I have to import sales Order into Order Management with tax details. Sales Order Interface does not capture the tax amount that is passed through the interface. Looks like EB Tax should be set up to calculate the tax after order is imported. I don't want tax to be calculated again in Oracle application as it is already calculated in the external system. I want tax amount to be accounted but not calculated in Oracle application.
    Please let me know your suggestions, to capture the tax information in Oracle application
    Thanks,
    Priya.

    So , Login to DTW .
    with the Desired Database and Login Credentials.
    Goto - > Templates - > Customized Templates
    Select The Object .
    Right Click on the object needed and choose Create Template for the Structure .
    Then use this template for import .
    Hope it helps
    Thanks
    Ashish Ranjan

  • Problem with tax condition in TAXINN

    Hi,
    This is related to India.
    We are using TAXINN tax procedure. We maintained the following steps:
    1.all conditions in the procedure – JMOP, JMX1, JECP,JEX1, JSEP, JHX1, JVRD assigned account keys for the required accordingly.
    2.made tax codes – V0 , V1
    3.assigned accounting keys to G/L accounts in OB40
    4.made condition record with Plant / vendor/ material combination for all above conditions.
    When I am making PO by entering all values including tax codes  I could not able to see values flowing for JEX1 (Set off condition for Ecess), JHX1(Set off condition for Sec Ecess), JVRD (VAT RM Deductible condition). When I go to Analysis Pricing and check for these conditions values are appearing for those conditions & for those combinations. But I got message “ Condition record exists, but has not been reset” . Because of this value is not flowing.
    Can any body throw light on this.
    Regards

    Hi Friends,
    I solved this problem by doing / adding following customization:
    SPRO.. Logistics genaral .. Tax on goods movement... India.. Basic settings ..Determination of excise duty.. condition based excise determation.. classify condition types
    Maintained for the following :
    TAXINN .. JHX1.. AT1 set off condition Total
    TAXINN... JEX1... Ecss set oof condition Total
    TAXINN... JVRD .. A/P RM VAT Deductible
    Then assign Tax codes to Compnay codes in
    SPRO.. Logistics genaral .. Tax on goods movement... India.. Basic settings ..Determination of excise duty.. condition based excise determation..
    Regards

  • POSTING_INTERFACE_DOCUMENT with tax holding base amount issue.

    Hello Experts,
    There is existing custom program which taking input from excel file and by using POSTING_INTERFACE_DOCUMENT FM they are posting Vendor Doc.
    Now they want to add with tax holding base amount to be add based on Tax Code. Through recording i got fieldname like WITH_ITEM-WT_WITHCD
    (tax code) and WITH_DIALG-WT_BASE (BASE AMOUNT).
    I'm using above field names and passing values to table of structure FTPOST, but its not working. is there any other way to make this work
    i found one table of structure FTTAX  (Taxes for Internal Posting Interface) can it be useful to achieve the goal????
    Thanks in Advance to all. 

    Uhm
    As you can see you've two codes for every wt lines, the first code is not editable
    Both the codes are the same values:
    - First CB, CB
    - Second CF, CF
    The wt codes you need to transfer to your posting are from master data (I don't know if it's for vendor, LFBW, or customer, KNBW)
    I suppose the order to show the wt depends on how they are set in master data
    Now, I've never used fm POSTING_INTERFACE_DOCUMENT directly, but it's used by BI standard RFBIBL00 and I've used it many many times.
    Usually the lines of wt have to have both codes, if it doesn't need to fill a code, this code has to fill with 'blank'
    So if It moved the wt for RFBIL00:
    - CB lines:
    WITH_ITEM-WITHT                 = 'CB'
    WITH_ITEM-WT_WITHCD       = SPACE
    WITH_DIALG-WT_BAS           = 0.
    - CF lines:
    WITH_ITEM-WITHT                 = 'CF'
    WITH_ITEM-WT_WITHCD       = 'CF'
    WITH_DIALG-WT_BAS           = 500.
    I repeat this is how the wt lines should be preparated for RFBIBL00, but this program calls POSTING_INTERFACE_DOCUMENT so I suppose it should be preparated in the same way.
    You can also considere to use RFBIBL00 instead of fm
    Max

  • How do I use an audio interface with iMovie?

    I'm trying to shoot a short clip of a musician playing. I want to use an interface with my higher end mics, and use iMovie '09 to shoot video. I have a Presonus Firebox as my interface. iMovie just doesn't seem to want to recognize it, nor record through it. This isn't something I can share to GarageBand because the timing between the video and audio has to be perfect. Any help?
    Thanks

    Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example.  Plug it in and it will be automatically recognized.  Use System Preferences > Displays to set options.
    The display can Mirror your primary desktop or Extend the Desktop.
    Regards,
    Captfred

  • 11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

    Hello Sir,
    As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
    (patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
    However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    drix10:/fmstop/patches/R1211AD/merge>ls -lrt
    total 13992
    -rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
    -rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
    drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
    p7461070_R12_AIX64-5L.zip
    p9179588_R12.AD.B_R12_GENERIC.zip
    p9477107_R12.AD.B_R12_GENERIC.zip
    drix10:/fmstop/patches/R1211AD/merge>
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    Error: Invalid option: -s
    usage: admrgpch -help
    admrgpch <source_directory> <destination_directory>
    admrgpch -s <source_directory> -d <destination_directory>
    [-verbose <level>] [-merge_name <pattern>]
    [-manifest <filename>] [-logfile <filename>]
    where
    * -help Print help message.
    * -verbose <level> Can be one of: { 0(SILENT),
    1(QUIET), 2(VERBOSE) or 3(LOUD) }
    Default - 1(QUIET).
    * -merge_name <pattern> The name of the merged patch (max 24 characters).
    Default - "merged".
    * -s <source_directory> Path of source directory where all patches to be
    merged have been unzipped.
    * -d <destination_directory> Path of destination directory where the merged
    patch will be created.
    * -manifest <filename> Full pathname of a file containing the list of
    patch zip files to be merged.
    * -logfile <filename> Admrgpch log file name.
    Default:"<CWD>/admrgpch.log".
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Without option -admode :
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 44 files of 876...
    10% complete. Copied 88 files of 876...
    15% complete. Copied 132 files of 876...
    20% complete. Copied 176 files of 876...
    25% complete. Copied 219 files of 876...
    30% complete. Copied 263 files of 876...
    35% complete. Copied 307 files of 876...
    40% complete. Copied 351 files of 876...
    45% complete. Copied 395 files of 876...
    50% complete. Copied 438 files of 876...
    55% complete. Copied 482 files of 876...
    60% complete. Copied 526 files of 876...
    65% complete. Copied 570 files of 876...
    70% complete. Copied 614 files of 876...
    75% complete. Copied 657 files of 876...
    80% complete. Copied 701 files of 876...
    85% complete. Copied 745 files of 876...
    90% complete. Copied 789 files of 876...
    95% complete. Copied 833 files of 876...
    100% complete. Copied 876 files of 876...
    Character-set converting files...
    3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
    drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
    admerge.pl:
    $Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

    Hi Srini,
    Thanks a lot !
    Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
    -rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009  admrgpch
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
            0509-150   Dependent module libnnz10.so could not be loaded.
            0509-022 Cannot load module libnnz10.so.
            0509-026 System error: A file or directory in the path name does not exist.
    Then I sourced R12 environment file and ran same command. Its completed successfully.
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 45 files of 883...
    10% complete. Copied 89 files of 883...
    15% complete. Copied 133 files of 883...
    20% complete. Copied 177 files of 883...
    25% complete. Copied 221 files of 883...
    30% complete. Copied 265 files of 883...
    35% complete. Copied 310 files of 883...
    40% complete. Copied 354 files of 883...
    45% complete. Copied 398 files of 883...
    50% complete. Copied 442 files of 883...
    55% complete. Copied 486 files of 883...
    60% complete. Copied 530 files of 883...
    65% complete. Copied 574 files of 883...
    70% complete. Copied 619 files of 883...
    75% complete. Copied 663 files of 883...
    80% complete. Copied 707 files of 883...
    85% complete. Copied 751 files of 883...
    90% complete. Copied 795 files of 883...
    95% complete. Copied 839 files of 883...
    100% complete. Copied 883 files of 883...
    Character-set converting files...
      3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.

  • Interface with Exchange server

    Hi i nbeed to write a program to interface with ms exchange dose anyone have any sample code i can look at? i need to extract info such as appointments.

    I'll be interested too. I'm writing a java app that would need to read and create calendar appointments, contacts and tasks. The java app is a CRM program, and its database becomes master for the exchange server that would replicate certain information coming from the CRM database/system.
    rgds,
    David

  • How to find open SO Items with tax code for a particular day?

    Dear all
    If i want to see all open SOs(items), with tax code for a particular day, how to find using table VBAP in SE16?
    Please guide me
    Edited by: Julius Bussche on Mar 3, 2009 11:10 PM
    Please use descriptive subject titles and the search

    Hi GB,
    Its always better to see through the standard reports , as you will be able to see the aditional info as well.
    In the case of table in se16 you will be able to see one table at a time and then you need to manually figure out the fields that required.
    For example if you want to see the sales order details through tables then
    1.You have to go to VBAK to see the document type and then you need to go to VBAP to see the items , it means that you need to access 2 tables for this simple thing ....
    In standard reports there will be lot of joins between the tables and you can view the data more elobarately as weel.
    Note : In general if you want to see the complete details of the documents(open), then pls use the reports.
    Regards,
    Vvieks

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

    Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

    APC, CyberPower are reliable.
    Look for 1500VA. As example:
    APC
    http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
    Cyperpower:
    http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

  • Error while sending PO (with tax code) from SSP to SUS via MM

    Hello Experts
    We are implementing Self Service Procurement and Supplier Self Services scenario.
    We have created a SC with Tax Code say X in Self Service Procurement. The SC gets created as PO in R/3 (MM) system.
    The IDoc which is getting created in the R/3 system has different segments than the one which gets created when we create the PO directly in R/3 system.
    This IDoc which is seen in R/3 with the Status 26 - ' Error during syntax check of IDoc (outbound) '.
    Please help, we are new to SSP.
    Thanx and Regards
    Gaurav
    Edited by: Gaurav Giroti on Jan 29, 2009 1:36 PM
    Edited by: Gaurav Giroti on Jan 29, 2009 1:37 PM

    note 1311560 to be applied in ebp.

Maybe you are looking for