Infinite restore loop AND disk utility lists HD size as 500GB

So, after reading everyone else's problem with the restore loop i have another kink to add to the mix. I am running software 1.2.1 in itunes 7.5 on a 5th gen 30GB ipod on a MacBook, and it is stuck in the restore loop. When I attempt to restore via iTunes, it says that iTunes can not restore the ipod becase it is busy. I have tried rewriting the disk via the Disk Utility but the DU lists the size of th disk as over 500GB. I had the iPod playing music and acting normal earlier this afternoon, this whole debacle started when i connected it to my computer for the first time in a few months to update the software. Any and all help would be appreciated.
I have tried alot of the other solutions listed elsewhere...but as far as i can find no one as had the wrong listed HD size problem.

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

Similar Messages

RAID Admin and Disk Utility show different sizes

Hello all,
I have tried searching through these forums for a resolution to this, but did not really find one. Here is my situation:
I have an XServe Dual G4 in a branch office. It has attached to it an XServe RAID. Last week, when I was down working in the office I added a new drive to the RAID. The lower channel on the RAID had 4 172GB drives in it, and I added a 5th and and told RAID admin to resize the RAID.
The next day, the RAID was finished resizing. RAID admin was reporting that the array was now 690GB. However, after rebooting the server and RAID multiple times, Disk Utility in OS X is still showing that the Volume on the RAID is only 517GB.
So, I have a couple of questions:
1. How is it possible that by adding a 172GB drive to a RAID 5 array that was about 520GB I ended up with an array that is 690 GB? That would imply that there is no parity (since 690 - 520 = 170 and the drive I added in was 172GB).
2. How do I get the server to see the additional space? The server is at the newest version of the OS and the RAID it as the newest version of the firmware.
Please help.
Mac OS X (10.4.8)

I've run into the same issue with a newer PPC XServe. However, after I tried to reformat, I still only show up with the orginal size, and not the new size, even after I restarted the server and XRAID.
Did you have any success with your reformat?

Can you use the "Restore" function in Disk Utility to clone MacBook Pro HDD and make a bootable copy?

I'm cloning my MacBook Pro's HDD to a SSD and didn't really want to install another app (SuperDuper, CCC), can I just use the Restore function in Disk Utility app to clone it and make a bootable copy on my SSD?
Thank you for the help!

Yes.
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Re: How to Clone Using the Restore Option of Disk Utility

This is a revision to original post:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled) and click on the Erase button. Wait for volume to remount on the Desktop.
5. Click on the Restore tab in the DU main window.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
8. Select the destination drive icon on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked.
9. Double-check you got it right, then click on the Restore button.

There is a checkbox option in the Restore dialog to Erase the Destination. Be sure you uncheck the option.

Restore image with Disk Utility

In Lion I miss the checkbox in the restore section of Disk Utility to NOT erase the volume I want my image to restore to. In Snow Leopard I was able to uncheck this box and Disk Utility then did a file restore instead of a block copy. The result was a completely defragmented volume. Is there an option to get a similar result in Lion?
Thanks!

If you need to defragment your drive, then the safest and fastest way to do so is:
1. Get an empty external hard drive and clone your internal drive to the external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Check the box labeled Erase destination.
4. Select the destination volume from the left side list and drag it to the Destination entry field.
5. Select the source volume from the left side list and drag it to the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Alternatives to the above are using one various defragmentation utilities such as iDefragment or Drive Genius. But these utilities have to move data around on the drive resulting in slower times plus the greater risk of file corruption or disk directory corruption. The above method gives the same result - a fully defragmented drive plus a backup to boot.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

Problems running Software Update and Disk Utility

I had automatic updating turned on in the Software Updates control panel, so I believe the system tried to apply the 10.4.6 automatically and somehow failed.
Ever since, when I try to run Software Update it hangs while trying to connect to the internet to get the list of available updates. I tried downloading the installer directly from Apple, but when I try to select a volume on which to install the update, it doesn't list my hard drive.
Finally, when trying to run the Disk Utility, I get an error about how the Disk Utility cannot be started because a background process is not running. I have to Force Quit to exit out of the Utility.
I was able to boot off the Mac OS X 10.4 installation DVD at which point I repaired the permissions and repaired the disk. However, upon restart the same problems remain.
I've seen several other people post about this issue; has anyone found a resolution OTHER than doing an Archive and Install (which I don't want to do if I don't have to?)
Thanks so much for help that anyone can provide!
iBook G4 Mac OS X (10.4.5)

Create a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.

All of a sudden our fairly new Air's memory is almost full. The disk utility lists almost 50 GB as "Other". What has happened to our memory?

All of a sudden our fairly new Air's memory is almost full. The disk utility lists almost 50 GB as "Other". What has happened to our memory? I am new to Apple products.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
When it comes to clearing space on a drive, you have to decide how much to clear.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data.
Although you may be told by other contributors to this site that you should keep some fixed percentage (such as 10% or 15%) of the space on the boot drive available, that advice has no basis in fact as far as I can tell. The amount of available space you need depends on your usage pattern. I don't know how much you should have, and I don't make recommendations based on what I don't know. It should certainly be more than 9 GB.
If your data collection is growing quickly, then, depending on the size of the startup volume, you may need more than 10% available space in order to avoid the risk of filling it up, which can lead to a boot failure. If your data is relatively static, you may need less than 10%. I've seen no evidence that there's a loss of performance when available space falls below any threshold higher than the one Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
About local snapshots
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click the line of text below to select it, then drag or copy — do not type — into the Terminal window:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Press return. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Software Update and Disk Utility no longer work (Leopard)

Hello. After upgrading yesterday from 10.4.11 to 10.5.0 then updating to 10.5.1 I find that repair / verify permissions no longer works (it just hangs after starting).
And the same with Software Update, it starts the check then just hangs. Grateful for any ideas!
Overall I am finding Leopard much slower in operation than Tiger. Peter

Create a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.

Why is the Restore function in disk utility so slow?

I am using the Restore functionality in Disk Utility to copy my old 250GB Time Machine disk (which is now full) to a new 1.1TB disk.
250GB is calculating to take 11 hours to copy. Both disks are connected via FireWire (old one is FireWire 400, new one is FireWire 800).
If my math is correct, that's only 6.4MB per second.
Why is it so monumentally slow?

That's pretty much normal for a FW400 drive. Restore takes more time that some copy programs because of the file verification it performs.

Repair Permissions differences between Onyx and Disk Utility

If I repair permissions, there are a large number of 'repaired permissions' if I switch between using Onyx (10.6) and Disk Utility. Most of them are in
System / Library / CoreServices
System / Library / Java
System / Library / Frameworks
Why should this be? It makes me think that either Onyx or Disk Utility is doing it wrong. If I had to back which one it is, I'd have to say Onyx is the likeliest suspect. In other words should I avoid using Onyx to repair permissions and just use DU in future?

should I avoid using Onyx to repair permissions and just use DU in future?
Probably, but some permission results are always and repetitively wrong:
As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.

Safari, Mail and Disk Utility won't run unless Font Book is Open

Recently Safari, Mail and Disk Utility would crash and spin and the "Application Not Responding" line would appear when I checked the program in the dock. After following a variety of tips from other Apple users, I finally got the programs to run. However, I started them while Font Book was open and now they only work when it remains open. I've been using Apple/Mac products since the beginning of time and have never seen anything like this. I've repaired permissions, throught out preferences, etc., etc. and can't resolve this problem. Please, someone, help me.

Hello buhrow:
That makes two of us that go back to the beginning of time and have never seen anything like that. Have you run the fontbook applications to eliminate duplicates and check for corrupt fonts? Offhand, I cannot understand why just having a program open would prevent other programs from crashing.
If nothing else works, you might want to consider an archive and install (after backing up, of course):
http://docs.info.apple.com/article.html?artnum=107120
Barry
Message was edited by: Barry Hemphill (spelling, no checker)

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

Ipod shuffle 3 : impossible to detect it on mac (finder, itunes and disk utility)

Hi,
ipod shuffle 3 : impossible to detect it on mac (finder, itunes and disk utility), but it works, I can listen music. Do you have a solution for me ?
the same on windows... no détection on plug
thanks
Fred

Does it still charge when connected? You said it still works with headphones.
It's possible that the connection port (the headphone jack) on the shuffle has become faulty. It has different connection points, so it's possible for it to work for headphones (and charging), but not for data. It's also possible that the USB cable is bad, if you have only one and no alternate way to test it and confirm it's working.
However, you can try these other things. Shut down the Mac and disconnect all USB peripheral devices, including any hub. Use this procedure to reset the shuffle
http://support.apple.com/kb/HT1655
Start up Mac with nothing connected, except for standard keyboard and mouse (for a Desktop Mac). Connect the shuffle to a direct USB port. Check with iTunes, Finder, and Disk Utility to see if there is any improvement.
If that works better, experiment with connecting other USB device, to see if there was some type of USB conflict, or maybe overloading of USB bus (for power).

I cannot find my data on my finder sidebar and i tried to check the finder pref and Disk utility

I cannot find my data on my finder sidebar and i tried to check the finder pref and Disk utility
and i do not want tpo delete any data on my flashdisk

Launch Finder.
View > Show sidebar.
Move the mouse to the right of the "Devices", "Show" should show up.

Infinite restore loop AND disk utility lists HD size as 500GB

Similar Messages

Maybe you are looking for