Info type 0002 specific to Company code

Hello All,
Requesting your suggestion for the below.
I need to create a HR master record for an employee using t-code PA40.
Under the info type 0002 ( maintain Personal data) , I would like to keep certain fields in the screen as mandatory , input or hide, specific to company codes.
How can this be done ? Can anyone pls suggest me the config path.
Thanks in advance.
Regards
Sandeep

Hi Sandeep,
Goto SM31 -V_T588M.
For module pool MP000200 - create two variable keys.
For one key, hide the related field and for the other, donot hide.
Then goto PE03 - P0002.
For company code XXXX the output value shall be assigned to the first variable key.
For company code YYYY the output value shall be assigned to the second variable key.
Regards,
Dilek

Similar Messages

Different exchange rate type M in different company codes

Dear all,
I am facing the following very inconvenience problem:
I am an SAP consultant and has ALWAYS set up exchangre rate type M, the same rate used for all company codes in the Group.
My new customer wants to have different exhange rates for ALL company codes, that means we cannot use exchange rate type M for all company codes. All company codes in Sweden could have the same exchange rate type and so on, since all the rates within a country is updated with the rate from banks in the particular countries.
I think a solution could be to create worklists for every country and to always maintain all the rates against the local currencies within the country. This means in Sweden all the rates will be maintained against SEK, but never in any other way. That menas we can never maintain the rates from SEK to EUR in Sweden, we only maintain the rates against Sweden. I Finland however, all rates will be maintained against EUR (the local currency för all company codes in Finalnd).
Could this cause problems (or inconsistency) that incorrect rates will be used?
I am very very thankful for all help I can get in this question!
Best Regards, Åsa

Hi
Here you need to concentrate on Direct or indirect quotation
If you are using EUR to SEK (LC) - use direct quotation as 8.8307 1:1 relation
If you are using SEK to EUR - use indirect quotaion as 0.1132 1:1 relation
Pls let me know if you required further help
Reg
Vishnu

Defaulting document types for a particular company codes.

Dear All,
Is there a way to default certain document types to particular company codes, so that when ever if we enter that particular company code then automatically the default document types has to come. I tried to check for configurations but could not. Please let me know how to achieve this scenario.
Regards
Srikanth

Hi,
No, does not seem possible to me without development...
Regards,
Eli

Exchange Rate Type default different from M for a company code

Dear SAP guru,
Would you shed some light on this?
How would we be able to default/assign a different exchange rate type from M at a company code level?
I have a company code - finance company - that every foreign currenty transaction needs to be translated using different exchange rate type (i.e. daily hedge rate) than other operating companies.
The OB22 screen makes it appear as M rate is specificied as 1st currency in company code, but grayed out and not able to change.
Please help me with your expertise on this.
Kind regards
taro

Hi,
ExRateType is hardcoded in
Main Program SAPL0F03
Source code of L0F03I01
*------- Daten zur ersten Hauswährung -
rfcu4-curtp = '10'.
rfcu4-bwer1 = '0'. "AT 23039
rfcu4-kurst = 'M'. <<<<<
rfcu4-cursr = '1'.
rfcu4-curdt = '3'.
The reason why the assignment of exchange rate type M to the first company code currency is a historical reason. A lot of coding within the SAP system is directly developed under the prerequisite that the exchange rate type for the first company code currency is M.
As you described you want to setup several company codes in one client that all have the same first company code currency but should use different exchange rates. To solve that issue there are 2 ways available:
The first way is that you use the functionality to assign an exchange rate type to a document type. That would mean a lot of work because in that case you would have to define all document types seperatly for
every company code.
The second possible solution is that you use different names for the fist company code currency.
That means for example that you name the first company code currency in company code 0001 USD and in company code 0002 US1. So you can use different exchange rates for the same currency.because in that examle USD and US1 are only different names for the same currency. Using this approach you can have different exchange rates for different companies with the same company code currency by setting only different names even though the exchange rate type M is fix asigend to the first company code currency.
Best Regards,
Gladys xing

Assign Withholding Tax Types to Company Code

In SPRO in the menu item "Assign Withholding Tax Types to Company Code" (program SAPL0F61), I enter to try and setup the Types for my new Company code.
When I go into New Entries, On the top drop-down I enter my new Company Code, then in the
"Wthhld tax type" field, I click on the look-up and don't see the Withholding tax types that I setup for country Italy. The only ones that are showing up are for a previous country setup Mexico.
I setup Italy as a Withholding Tax Country, and I setup the Withholding Tax types already.
Does anybody know how to get the Withholding Tax Types to show up for Italy and not just Mexico?
thanks

This is an ABAP Development forum, you might want to post your question in the SD or FI forum instead.

FI Number Range Number by Document Type -- different by company code

In transaction OBA7, I assign a number range number (T003-NUMKR) to each FI Document Type.
We have over 40 company codes on SAP. One of those 40 company codes requires sequential numbering of FI documents for the whole company code across all document types. The other company codes require different FI number ranges based upon document type.
I need to identify a solution where I can assign a different number range number by document type for different company codes.
For instance, company code IT01 should use a single number range number for all FI documents -- i.e. RV, SA, AB, etc. Then, all other company codes should use a different number range number for each document type.
Any ideas here? My problem company code is in Italy where our accountants tell us all FI Documents must be sequential, without gaps.

Hi Colin,
 The point is that it is about journals
 Sales Journal = Doc type RV
 Cash Sales Journal = Doc Type DR or have RV&DR use the same number range.
 For clearing you will have to create new doc types eg.
 AB = GL Clearing
 KB = Creditor clearing
 DB = Debitor clearing
The existing companies will also have to use these since these defaults are set in customising, but you have clearly defined Journals that comply with the requirements
It is probable that you will need additional doc types,to ensure compliance. In my case all creditor invoices used Doc type KR/KG (SAP Standard and they use the same number range), for the Italian company i then had:-
 KR/KG = Domestic Purchase Journal
 New Doc Type = EU Purchase Journal
 etc.
Kind regards

Tax code optional in document type for one company code

Hello experts,
Is it possible to make tax code optional in a document type only for one company code. If yes kindly explain me the process in detail.
Regards,
P.Krishna Chaitanya.

Hi
If I understand your requirement correctly that for a particular document type, the line item should not contain a tax code, while for other Document Types, it should have a tax code. Note, the logic for making tax code optional/mandatory is made through the field tax category in the GL Master and not through the field status. further Build in a validation rule, using a logic as follow:
BKPF-BLART IN "SET NAME"
Check BSEG-MSKWZ<> ' '
Set an Error message
You can also create a subsitituion rule for populating tax code with a blank value if a particular doc type is used.
BKPF-BLART in 'SET NAME"
Substitute BSEG-MSKWZ= ' '
You may need to allow tax code as a field to be substituted in the maintainence view of table GB01 using T Code SM30 for boolean class 9
Regards
Sanil

Company code specific data

Hi Experts,
In the customer master record, what data would be specific to company code.
Thank you

HI
The data is categorised into General data, Company code data and sales area data. Each area have different tab pages with all the related information.
All the tabs and fields in the 'Company Code Data' Area of customer master holds the information related/specific to a particular company code.
Thanks,
Ravi/specific

One customer / vendor used to share by two company codes

Hi experts,
is there any possibility to share same vendor or customer in two different company codes?
my client have two company codes 8000 and 9000 and that two company codes sharing the same customer /vendor XXXXX.
now they want to post the two company codes transactions to one customer/vendor.
means when we open the customer /vendor line items we should able to see two comapny codes transactions of that customer/vendor.
plz advice.
Thnaq,
sandhya.

yes it is the same way the SAP suggests- provided address is same.
SAP vendor / customer has got two segments -
General data - which is common for all company codes and is at client level data and stored in table KNA1 (customer) and LFA1 (vendor)
Co code data- which is specific to company code - create as many views for each co code which are specific to co code decisions and accounting - and is stored in KNB1 (customer) & LFB1 (Vendor)
In the same way Sales organisation and Purchase Organisation also stored separately.
For creating Co code data, enter existing customer/vendor code and type co code and it will allow u to create both data.
Hope this is of help to u

Different company code currency

What is the significanc of flagging "different company code currency" in OKKP setting.
What are the advantages of the above settings?
What kind of reports available by flagging this?
Moderator: Please, read help.sap.com

Hi Anilkg
We are not able to directly check this indicator. When you select the currency type other than 10-Company code currency, this indicator gets indirectly ticked and thereon the system allows different company code currency for the companies which are assigned to one controlling area which has specific controlling area currency. There is no specific advantage or report by this tick. It only informs that different currencies are allowed for the companies assigned to the controlling area.
Trust this helps much!
Cheers!

Field selction for PO at Plant or Company Code level

Hi All
We are using single customized document type for PO for all my three company codes.Each company code is having a single plant.My requirement is that certain fields fields to be mandatory for specific plant/company code and not for all plants.How do I achieve this?

Dear satish Kumar
If you want your forms should give different output for the same document type, I think it is possible. Tell your ABAPer to use conditions in smart forms based upon object -Company code or some other Cocd unique object to bring in the details of the respective company code details to the layout.
But I have my doubts for the fields making mandatory, in a single document type. If you wish your PO screen to behave differently for each Cocd i doubt whether it is possible in one Txn code. Instead of complicating by creating two more Txn codes and have independent screen entries for each Cocd, Keep the fields optional only for all the company codes, but tell the users to make specific entries related to each cocd. This will need ME21N only but User descipline is must so that they get the required output.
Regards

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
Please read this ->
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
Other related links ->
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

Changing screen layout of custom info type

Hi we created a new custom info type from std info type 0002 .We want to realign the fields in the generated info type,but we get an syntax error if we chg it from the screen editor ... can u tell me how to chg it?

Have you read <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf">Developing an Infotype in Personnel Administration</a> before creating your new infotype ?
Look at pages 16-25. (in peculiar look for T588M and modification groups)
Regards

F.27 Generate one statement for items posted in several company codes

Have a customer extended to several company codes. This customer has open AR line items in several company codes. Client wants to generate a statement that includes all AR line items. (Cross company code Statement) I found a place in config for defining correspondence types where there is a setting for "Cross comp. code. I choose this setting for several standard correspondence types but the system still generates a separate account statement/open item list for each company code where the customer has postings. Can the system generate a cross company code statement using standard config?

Hi Russ
In the IMG task ASSING PROGRAMS FOR CORRESPONDENCE TYPE dont specify the company code for your correspondence type and then you should be able to get all the open items across the company code.
Also you need to select the cross company code in the Correspondence type config.
Thanks
Ashok

Credit Management Company Code Level

Dear Experts
Is it possible to set credit limit for customer at company code level?
eg. The same customer is maintained for diffrent company codes & one credit control area for all these company codes. Now the business wants to set up credit limit for the customer at one particular company code inspite an overall credit limit is assigned to this customer.
Is this can be possible in FD32 central data?
Please advise
Regards
Deepu Pillai

Thanks for your reply
But i could not find any way to maintain the credit limit at company code level.
For eg. If customer A is maintained in two company codes say 1000 & 2000. The credit control area is 1000 for both company codes.
Then in FD32 i can find only customer & credit control area & no company code.
My requirement is i want to maintain credit limit for A specifically for company code.
Please advise.
If any user exit to solve this, please let me know
Regards
Deepu Pillai

Info type 0002 specific to Company code

Similar Messages

Maybe you are looking for