Infocube Attribute, How is the efects in reports?

Hi Friends,
I have a doubt about include a navigational attribute in an infocube..
- If I include this in a report, could I filter by this char?
- IAbout reports: an IC characteristic, will have the same behaivour than a IC attribute ?
Thanks!

Hi,
IF the attribute is a navigational attribute it behaves exactly same as a characteristic in terms of navigation.
You can do the below :
1. Add a filter
2. Have a selection
3. Drill Down etc.
Only Difference is you cannot inclue navigational attribute of  a navigational attribute in the report.
-Vikram

Similar Messages

  • How should the TL be reporting on the CR?

     1)Default on modification which was executed post CH7 discharge, never reaffirmed and no further monetary liability.After mod. default TL’s continued to report CH7 status, closed account, 0 balance, etc. for several years (which appeared to be correctly reporting). 2)Now, a few years after the mod. default, one TL is reporting status as open, late, foreclosure after co-signer filed a CH7 last year which then was subsequently converted to CH13 this year, approved by the courts with the case now closed. How should the TL report for 1)? I thought it would continue to report CH7 status, closed account, 0 balance, etc. for party 1) I am trying to understand how the reporting should take place on a co-signed note and mortgage when both signers have filed as described above. Thank you for your input.

    There are several AirPort models, but your Internet Service Provider modem should jack into the circular looking icon, and any local ethernet cables (if any) should jack into the double arrow looking icon. Hook 'em up, shut everything down, then power them up in order: ISP broadband modem, AirPort, computers.
    http://tidbits.com/article/8813.
    One caveat, does your ISP's modem provide DHCP/DNS/wireless services? If so, then your AirPort needs to not duplicate those services.

  • How to know the list of reports that are in usage

    Hello,
    How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
    Regards,
    Anand.

    Hi,
    Pl look at following tables if you need any further detailed information
    Table Name  Use of the table 
    RSZELTDIR
    Directory of the reporting component elements
    RSZELTTXT  Texts of reporting component elements 
    RSZELTXREF  Directory of query element references .
    To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename] 
    RSRREPDIR
    Directory of all reports (Query GENUNIID) .
    To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename] 
    RSZCOMPDIR  Directory of reporting components.
    To get query change status (version, last changed by, owner) of a cube. 
    RSZRANGE  Selection specification for an element 
    RSZSELECT
    Selection properties of an element
    RSZCOMPIC
    Assignment reuseable component <-> InfoCube 
    RSZELTPRIO  Priorities with element collisions
    RSZELTPROP  Element properties (settings)
    RSZELTATTR  Attribute selection per dimension element 
    RSZCALC  Definition of a formula element 
    RSZCEL   Query Designer: Directory of Cells 
    RSZGLOBV
    Global Variables in Reporting 
    RSZCHANGES  Change history of reporting components
    Thanks and regards

  • How to restrict the display of report variants

    Hello All,
    I want t know how to restrict the display of report variants.
    I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
    I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
    Thank you for your help in advance.
    Regards,

    Hi,
    Can you just try this
    DATA:it_varid TYPE TABLE OF varid.
    DATA:wa_varid TYPE varid.
    INITIALIZATION.
      SELECT * FROM varid INTO TABLE it_varid
          WHERE report = sy-repid
          and ename = sy-uname.
      IF sy-subrc = 0.
        LOOP AT it_varid INTO wa_varid .
          CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
            EXPORTING
              report               = sy-repid
              variant              = wa_varid-variant
            EXCEPTIONS
              variant_not_existent = 1
              variant_obsolete     = 2
              OTHERS               = 3.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
        ENDLOOP.
      ENDIF.

  • How to show register attribute value in my register users report in FIM 2010 R2

    Hi,
    How to show register attribute value in my register users report in FIM 2010 R2?
    Please suggest on this.
    Regards
    Anil Kumar

    hello,
    the only way I know is manage the attribute descriptiona s a property and then enable the pivot table option "Show properties in tooltip".
    But I'm interested in what you mean with  "using
    "OLAP pivot table extension" is an option". How this works?
    Thanks
    bye
    Norman

  • How to put borders in the tabular form report

    Hi,
    I need to put borders in the tabular form report in the apex UI .I mean in the by default no boundary comes so I need vertical lines in the column .
    So how to do that.
    Thanks in advance.
    Edited by: Vivek on May 22, 2012 8:25 PM

    Edit the report page > Report Attributes > Change the report template for different look and feel
    You can also customize the report template or even create your own template
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25707

  • How does the attribute gets the data from R/3 field?

    Hi Experts,
    It could be silly Q.  IO has attributes x, y, z.......  When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data?  I've been working in BW and suddenly I got confused.  Someone please provide me some info
    Thanks,
    Radha

    X,Y,Z being attributes of an info object A.
    When A gets loaded it will be loaded with X,Y,Z.
    If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
    If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
    Ravi Thothadri

  • How to Install the Forms and Reports 6i in Ubuntu 6.06 LTS

    Dear All,
    I need to install Forms and Reports 6i in Ubuntu 6.06 LTS.
    I had downloaded the d2k6irelease2.tar also and extracted the tar file.
    I don't know how to start up with the installation further., Is there any document available for the installation process inubuntu.. or what are the steps that i need to follow to make it work..?
    Many thanks in advance...

    Hi,
    Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
    http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
    You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
    HTH,
    Jim

  • How do I use the Oracle Developer Reporting Control in Visual Basic 6.0?

    I was wondering how to use the Oracle Developer Reporting Control componant in Visual Basic 6.0 to generate reports in Oracle Reports? Any help would be appreciated.

    Hi Rohit,
    Would like to ask you some questions about the oracle report with Visual Basic.
    1. I have a report built in oracle report. Currently there is a Visual Basic program want to pass some parameter to this report. Can Visual Basic program pass the parameter to this oracel report?
    2. Based on yr answer, do i have to installed the oracle report? or just copy and register the Rwsxa60.ocx (i'm using oracle report 6i) in the PC? So can i use this activeX control.
    3. Is this activeX control similar to Crystal report object which can found in VB?
    4. Is there an example/guide on how the Visual Basic pass the parameter to oracel form?
    Your answer will be much appreciated.
    Thanks.
    Regards,
    Hock Leong

  • How can I access the Attribute Values from the Search Region

    Hi all,
    I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
    I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
    Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
    I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
    Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
    If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
    SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
    I don't know how can I access the data from the Search Region.
    Please Help.
    Regards,
    Ranjith

    you could access the parameters entered in search region by the user as follows:
    You can get handle to the value entered by the user using queryListener method in af:query.
    You can intercept the values entered as described
    public void onQueryList(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
    for ( Criterion c : searchList) {
    if (c instanceof AttributeCriterion ) {
    AttributeCriterion a = (AttributeCriterion) c;
    a.getValues();
    for ( Object o : a.getValues()){
    System.out.println(o.toString());
    //call default Query Event
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    public void onQueryTable(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
    FacesContext fctx = FacesContext.getCurrentInstance();
    ELContext elctx = fctx.getELContext();
    ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
    MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
    me.invoke(elctx, new Object[]{queryEvent});
    Thanks,
    Navaneeth

  • How to track the changes at report level

    Dear Team ,
    Could you please help on below scenario.
    1.Is there any way to track the changes for each report wise ? Does it possible using the audit database?
    2. how to get list for report names by each folder wise( public folders) ?
    Thanks & Regards
    Venkat

    Hi Venkat,
    1.In Webi we have a option called Track click that option to enable you to  track the changes in your report and also in Tracking option you can change the color as you preferred.
    2.Once report is ready to export click (Ctrl+E) and click Public folder then select New folder option available in right corner and create new Folder and export your report.
    Thanks
    Vignesh R

  • How can we download the Purchase order report?

    Hi,
    In my requirement i am displaying the PurchaseOrder details report to the Manager in the workitem he want to download the report (after execution of the workitem the manager approved the PO) in the form of EXCEL sheet.
    Can anybody give the solution for this?
    Early response is appriciable and rewardable?
    Regards,
    Chow

    Hi,
    No i am not using any portal to execute the work item.
    can you please tell what is this UWL(Portal)?
    With this how can we execute the Workitem?
    How can we download the report by using the UWL portal to execute the workitem?
    Early response is appriciable.
    Could you give the reply ASAP Please?
    Regards,
    Chow.

  • How to get the alv grid report in another screen when double click on basic

    Hi.
    I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
    How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
    With Regards,
    Ramana.

    On double click event . you will have to call another screen say 9000.
    now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
    in PAI of screen 9000, you can return to the original ALV.
    method double_click.
    call screen 9000.
    endmethod.
    " now in PBO create a module display_alv2
    module display_alv2.
    'prepare the fieldcat/layout info for new alv
    'add the data to the new ALV table
    'instantiate the grid call.. etc
    'call the ALV
    endmodule
    "in PAI
    module exit.
    case sy-ucomm.
    when 'ENT1'.
      leave to screen 0.
    endcase.
    endmodule
    while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
    E.g
    *--Service Order
        ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
        ls_fieldcat-fieldname = 'AUFNR'.
        ls_fieldcat-scrtext_m = 'Service Order'.
        ls_fieldcat-ref_table = 'AUFK'.
        ls_fieldcat-ref_field = 'AUFNR'.
        ls_fieldcat-col_pos   = 1.
        ls_fieldcat-outputlen = 12.
        ls_fieldcat-emphasize = 'C400'.  "This will add color to the cell
        APPEND ls_fieldcat TO fcat_valid.
    Hope this helps.

  • How to read the Variance Analysis report S_ALR_87013139,  Pdt cost by Order

    Hi,
    Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
    I am looking to find how the numbers add up.
    Thanks for your help.
    Ram
    Message was edited by:
            Ram R

    Thanks Sridhar,
    When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
    Target (Deb) -   46,855.55
    Act (Deb) - 58,315.87
    Scrap - 0.00
    Var W/O- Scrap -  11,269
    WIP- 0
    Control Cost - 0
    Here Actual - Target is not equal to Variance. What could be the issue?
    Could you please tell me how SAP would update this report  with target & actual costs with respect to open production orders, carried over from previous periods.
    Thanks,
    Ram

  • How to call the XML Publisher Report thro Standard PO Output for Comm.

    Hi
    We need to call our custom report(XML Publisher Report) from the standard PO Output for Communication Report.
    There is a parameter(Purchase Order Layout) in PO Output for Communication in which we can see no. of standard reports. We want to add our custom report in that list so that when we will run this standard report by selecting our custom report for Purchase Order Layout parameter, we should get the output as per our Custom report.
    Since PO Output for Communication is a Java Concurrent Program, we are not able to place our custom report in the list of Purchase Order layout Parameter.
    Ram

    Welcome to the forums !
    Pl see if MOS Doc 305307.1 (How To Modify Print PO Report POXPOPDF With Custom Template) can help
    HTH
    Srini

Maybe you are looking for