Infopkg

Hi,
I have a infopkg. I want to schedule a batch job for this infopkg. How would I do that?
Please send me the procedure to create and to schedule the job.
Thnaks and Regards,
Pooja

Hi,
You can do this from the Infopackage itself.
Infopackage > Schedule tab -> Choose start later in background -> Scheduling options > Start load immediately / date from / weekly / monthly / periodic / after an event etc.
Once you select it and select the periodic button save and execute.
The Infopackage will get triggered based on the conditions you have defined.
Hope this helps.
Thanks,
JituK

Similar Messages

What is the difference between creating index on cube and infopkg in PC

Hi All
I have process chain in which after executing infopkg(load data infopkg),creating index on cube i.e Object type is Cube ,for which execution time is 1 hour,then after (subsequent step ) again create index at this time object type is "infopkg"
execute infopkg for which time is 2 minnutes,what is the diffrence between these two,if i reome create index from cube i can save 1 hour time,I have to reveiew this
chain for performance,plese post me your thoughts,it's argent,your help will be heighly appreciatable.Thanks in advance.
regards
EA

By default once u use create index process type Object type has Infopackage - change it to Cube tech name.
If its Cube - Indexes will be deleted or created for all the date in the cube.
Message was edited by:
Jr Roberto

Data Selection in Infopkg

Hi Gurus:
For a particular field in 'Data selection tab' I have to write a code that reads a flat file (range of values for the field), puts in a internal table & then poulates the field in the I.pkg with all the different values stored in the internal table.
Can u pls suggest the code...
Thanks & Regards

dear MK K,
here should the code you want...
data: debug_flag(1),
      l_idx like sy-tabix,
      begin of it_kunnr occurs 0,
        kunnr(10),
      end of it_kunnr.
     CALL FUNCTION 'WS_UPLOAD'
          EXPORTING
             CODEPAGE                = ' '
               FILENAME                = 'c:\upload\customer'
               FILETYPE                = 'ASC'
             HEADLEN                 = ' '
             LINE_EXIT               = ' '
             TRUNCLEN                = ' '
             USER_FORM               = ' '
             USER_PROG               = ' '
        IMPORTING
             FILELENGTH              =
          TABLES
               DATA_TAB                = it_kunnr
               EXCEPTIONS
               CONVERSION_ERROR        = 1
               FILE_OPEN_ERROR         = 2
               FILE_READ_ERROR         = 3
               INVALID_TABLE_WIDTH     = 4
               INVALID_TYPE            = 5
               NO_BATCH                = 6
               UNKNOWN_ERROR           = 7
               GUI_REFUSE_FILETRANSFER = 8
               CUSTOMER_ERROR          = 9
               OTHERS                  = 10.
*do.
if debug_flag = 'X'.
exit.
endif.
*enddo.
          read table l_t_range with key
               fieldname = 'KUNNR'.
          l_idx = sy-tabix.
          DELETE l_t_range
          WHERE iobjnm = '0CUSTOMER'
          and fieldname = 'KUNNR'.
          L_t_RANGE-SIGN = 'I'.
          L_t_RANGE-OPTION = 'EQ'.
          loop at it_kunnr.
          L_t_RANGE-LOW = it_kunnr-kunnr.
          append l_t_range.
          endloop.
          modify l_t_range index l_idx.
          p_subrc = 0.

F4 help in infopkg

When I am loading data at infopackage level in data selection we cam give the selection i.e from value & to value
But when I press F4 on this it is not displaying any thing
Whem I press F4 for company code then I can see the the values when I press F4
Where as I cant see any thing popping up for sales document no, , Distrubtion channel etc
What has to be done for this as I want to load the data of some sales doc no

Hi Maya,
The F4 in the infopackage attempts to look at the records in the R/3 system and hence may not work for all fields.
Also check this post:Re: F4 on fields in InfoPackage
Bye
Dinesh

Front end and back end questions

Hi,
If I want to develop a web base SOA application by using Jcaps, I have several question want to ask.
1.) In the front end, if i create the page by using eVision to create the page
flow and the page layout, how can I match the fields of the page (such
as the username, email, tel no... with the back end web services?
2.) Does the flow of the front end web pages are control by the page flow in
eVision? When will the eVision supported AJAX or JSF?
3.) What is the use of the eInsight Business process manager, does it
control all the back end flow, such as the flow of each web services?
Does Jcaps has the Bpel engine to control the flow of web services?
4.) I know that in JBoss, there is a jBPM server to control the flow of the front
end pages, does JCAPS has this kind of server?
5.) If i want to connect to the Database? I know that there is a eTL to extract
the data from the database, it is true? Or do u recommend to connect the
database directly through the web services by using JDBC or other
framework as well?
6.) If I have an existing application that is developed by .Net (With no web
services). How can i integrate with other systems? What can I do in order
to reuse the system? Or what Jcaps can do in this manner?
Thanks for you reply! ^ ^

Generally, back-end would consist of the taks associated with configuration of data targets (ODS, Cubes), working with extractors, mapping data to the data targets, writing transfer/start rtn/update rules, and creating Infopkgs/ Process Chains.
Front-end deals with the use of the BW - writing queries, workbooks, web (although I think some of the infrastructure aspects of web reporting. e.g. javascript/templates might really could be considered backend). Think of Front-end as all of the client/customer/user facing components.

Not getting delta master data after refresh

Hello,
We have just refreshed our QA (BW and R/3) environments from our production environments. It was a synchronized restore. We have done this multiple times in the past and have not run into this problem before.
Everything checks out fine - full master data loads fine, and delta transaction data loads fine, but our master data loads that are deltas retreive no data and produce the following message:
Selection conditions replaced by last init. selection conditions
Message no. RSM1036
Diagnosis
Selection conditions replaced by init. selection conditions.
No new selections can be made when requesting delta data from a 2.0 extractor.
Delta selections are composed of the total quantity of all the selections of all the sucessful init. requests for this DataSource.
I have looked this up here and in OSS. What I have found would indicate that we have multiple inits. However, when I look at the Initialization Options for Source System from within the infopkg, there is only one. Also, RSA7 appears to be fine on R/3.
Is there table or setting that may have been missed or some other place I need to check?
Any ideas or suggestions would be appreciated.
Thanks,
Kelley

Thanks, but I do not understand what exactly to look for in that table. What fields in that table should I check and for what?
I have compared rssdlinit on BW with roosprmsc on R/3 and they match. I have checked other tables too and they look fine.
There was a mistake made when the system was refreshed that may have caused this problem. That would at least explain why we are having this problem now and did not before.
I tested one of our delta master data objects (0material_text). I deleted the init from within the infopkg. Then I ran the infopkg to init with no data transfer. That appeared to work - resulting in 1 record which is normal for an init delta with no data. Then changed material text on R/3 and ran the infopkg with delta update. It still gave the same message that I listed in my first post, and it retrieved 0 records.
Any ideas?
Thanks,
Kelley

Front end and Back end experience in SAP BW

Hi Friends...
Can ne1 plz explain wht things in SAP BW come under Front end and Back end experience......Thanks in advance

Generally, back-end would consist of the taks associated with configuration of data targets (ODS, Cubes), working with extractors, mapping data to the data targets, writing transfer/start rtn/update rules, and creating Infopkgs/ Process Chains.
Front-end deals with the use of the BW - writing queries, workbooks, web (although I think some of the infrastructure aspects of web reporting. e.g. javascript/templates might really could be considered backend). Think of Front-end as all of the client/customer/user facing components.

What are the roles in CRM implementation Project(all generic extractions)

Hi Gurus,
Now I am placed from a support project from BW (CRM) implementation project(all are generic extractions).
& I am also new to implementation project.
what are the neccessary steps to be taken when we are implementing BW for CRM.
Gurus please clarify my doubts.
1. what are the steps in implementation project in detail(as a developer).
2. what are the sizes of the cubes,ODS & How to decide them.
3. what are the neccessary steps for Master data & Transaction data.
4.How to make the functional specifications for Infoobjects,cubes,ODS,Remote cubes,Multiproviders.
5.can we change to delta loads to full loads if yes what happens to existing data.
6.How flat file extraction used in the case of crm& how to do ascii format.
7.What are the steps to be taken when we are creating Queries & Reports in BW CRM.
It's very urgent.
thanks = points.
Bwcheta.

1. what are the steps in implementation project in detail(as a developer).
U have to basically to the techinal design after understnading the functional designs and implemnet the same( creating infoobjects, datatargets, datasources, queries etc.). Then u have to load data and do the unit testing on the same.
2. what are the sizes of the cubes,ODS & How to decide them.
Completely the business reqmnet and the data that the client wants to load.
3. what are the neccessary steps for Master data & Transaction data.
U have to understand ur master data and transaction data on the basis of whch u have create ur infoobjects and load data in them and finally in the datatarget.
4. can we change to delta loads to full loads if yes what happens to existing data.
Sure u can do that by choosing Full update in the infopkg. It will just load the complete data instead of changed records.
*Hope it helps.

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

PSA to Multiple Data Targets in process chain

Hello All,
I am trying to create a process chain that loads data from an already loaded PSA to further targets. (Note that the infopackage to load from R/3 to PSA is in another process chain). I am using the "Read PSA and Update Data Target" process type. But it allows only one data target. I need to push the data to all the targets of that infosource. Do I have to put a process for each target? Or is there a work around? Please help.
Thank you,
Rinni.

Hi Hemant,
Thank you for your detailed answer. I know that it is mostly not practical to have the InfoPackage and "Read from PSA" package in different local chains. However I am facing a situation where I need to create a chain that just extracts all the data from R/3 and loads it till PSA in BW (This is very time critical, so we do not wish to put any other processing in this chain). And in the second chain, we want to put further processing steps within BW. That is the reason, loading from PSA to ODS needs to be in a separate chain.
Another thing is the variant does have a field to enter Data Target, and that shows only the targets of InfoPackage, but allows me to select only one. However, I will go ahead and try with the Infopkg entry as you suggested.
But if you could just elaborate on why you said, I CANNOT have PSA to Targets in a separate chain, I would really appreciate it!
Thanks again,
it was a big help!!

How often cube or ods is loaded

Hi all,
Can you plz help to find the easy way to find out how often a cube or ods or any object is loaded say daily or weekly . how to find it easily when i have many objects.

Hi Bhavani,
if your cube is getting loaded from ODS then copy the technical name of the update rules of ODS go to infosource tree and then find that particular technical name there. You will find the infosource associated with the ODS then find the infopackage which is associated with the process chain. Double click on every infopackage, the moment you ll double click it then it will display the msg saying "infopkg already in process chain". click ok and go ahead.
You will find yourself under schedule tab there you can find your process chain name just click on the icon which is in the other side of start button.
Copy the technical name of the process chain and go to RSPC and find this pc. Open the pc and right click the start process-> change selection->Periodic job button. There you can find the schedule frequency .
Hope this helps
Edited by: Anup Chaudhari on Nov 19, 2008 5:56 AM

Inventory management scnerio

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using standard PDF , for this i activate infocube 0IC_C03 and connect that cube througt these data sources 1. 2lis_03_bx,bf and um .At R3 end i fill up set up table and data is visible in RSA3 t-code on R3 .
After this I make infopkg for all the three Infosources BX,BF and UM in inventory management PDF for infosource BX there was an option in infopkg create opening balance but i am unabel to find this option in my infopkg . There was one more thing in this PDF marker update I am unabel to find this option .
So can anybody tell me about those things (Opening stk in infopkg of BX and marker update )??
Thanks and regards
Ankit modi.

Thought you are with some other PDF.
Check this for marker update:
Refer
inventory
NO MARKER UPDATE
No Marker update
compression with marker and no marker update
where u can see the marker update option?
Thanks..
Shambhu

Unable to find the timestamp in SPRO-"delete timestamp for infosource"

in system BIT.
issue: unable to find the timestamp in SPRO-"delete timestamp for infosource" in ECQ, for a load which i did in BIQ and getting error that init was already done but request was deleted from target.
for cube 0CFM_C10, i did init load from 0CFM_POSITIONS flow , was fine
next init load from flow 0CFM_DELTA_POSITIONS, some issue,
got messaget that init was already done but request was deleted from target.
so i deleted req from infopkg-scheduler-init options for src system - here deleted the req.
did load got same error again.
next in ECQ, SPRO- "delete timestamp for infosource", for this option when i search, i am getting msg that "0 timestamps deleted for infosource".
why is that i am unable to find the timestamp here in SPRO in ECQ? any other solution ?
pls help
regards,
swetha

thanks.
deleted the additional entry from SPRO as suggested in this thread.
Error while executing RSA3
did the load ,
init load via 0CFM_DELTA_POSITIONS flow, successful :   so that error got solved.
delta load via 0CFM_DELTA_POSITIONS flow, getting another new error and message below
Job terminated in source system --> Request set to red
can anyone suggest on how to solve this?
in src system logs, this data was found
Job log overview for job:    BIREQU_DAVZG15LMNNG2N3XPN9J5C6QS / 11111300
Date       Time     Message text                                                                      Message class Message no. Message type
19.07.2011 11:11:13 Job started                                                                            00           516          S
19.07.2011 11:11:13 Step 001 started (program SBIE0001, variant &0000000083979, user ID ALEECQREMOTE)      00           550          S
19.07.2011 11:11:13 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)               R3           413          S
19.07.2011 11:11:13 DATASOURCE = 0CFM_DELTA_POSITIONS                                                      R3           299          S
19.07.2011 11:11:13 RLOGSYS    = BITST                                                                     R3           299          S
19.07.2011 11:11:13 REQUNR     = REQU_DAVZG15LMNNG2N3XPN9J5C6QS                                            R3           299          S
19.07.2011 11:11:13 UPDMODE    = D                                                                         R3           299          S
19.07.2011 11:11:13 LANGUAGES = *                                                                         R3           299          S
19.07.2011 11:11:13 *************************************************************************              R8           048          S
19.07.2011 11:11:13 *          Current Values for Selected Profile Parameters               *              R8           049          S
19.07.2011 11:11:13 *************************************************************************              R8           048          S
19.07.2011 11:11:13 * abap/heap_area_nondia......... 0                                       *             R8           050          S
19.07.2011 11:11:13 * abap/heap_area_total.......... 16777216000                             *             R8           050          S
19.07.2011 11:11:13 * abap/heaplimit................ 40000000                                *             R8           050          S
19.07.2011 11:11:13 * zcsa/installed_languages...... 1CEFIJKLNOSUV                           *             R8           050          S
19.07.2011 11:11:13 * zcsa/system_language.......... E                                       *             R8           050          S
19.07.2011 11:11:13 * ztta/max_memreq_MB............ 2047                                    *             R8           050          S
19.07.2011 11:11:13 * ztta/roll_area................ 3000000                                 *             R8           050          S
19.07.2011 11:11:13 * ztta/roll_extension........... 2000000000                              *             R8           050          S
19.07.2011 11:11:13 *************************************************************************              R8           048          S
19.07.2011 11:14:15 Internal session terminated with a runtime error (see ST22)                            00           671          A
19.07.2011 11:14:15 Job cancelled                                                                          00           518          A
Edited by: Swetha N on Jul 21, 2011 6:40 AM
Edited by: Swetha N on Jul 21, 2011 6:40 AM

BW - APO Datamart datasource migration issue

Hi,
Question : Can we migrate datasources exported as datamart from APO-DP system into BW, from 3.x to 7.0 or does it have to be a 3.x datasource with transfer rules, TS , update rules etc ...
1) I know we cannot migrate data marts with 8* or //8 but this datamart is replicated from our APO-DP system and begins with 9*.
Thanks .
HS

Hi Geetanjali,
Thanks for the reply.
My problem is that I am getting error message "No transfer structure available for infosource 9* in source system" when I run the infopkg to load in PSA ( which is default for 7.0 datasources).
This is the dataflow l I wanted to have which replaces old model as shown :
NEW 7.0 dataflow : Datasource -->infopkg --> psa --> dtp -->transformation --> cubes ( same source feeds 3 cubes ) .
OLD 3.x dataflow : DS >Infosource>Transfer rules--> infopkg --> update rules --> cubes.
Thanks .
HS

Infopkg

Similar Messages

Maybe you are looking for