Inforecord in APO inbound Q again and again !
Even after excluding the info record and the associated materials and locations from all the integration models, the inbound Q error points to the same info record in all intergration model activation (one by one in desired order and also in background all models). I have even flagged for deletion, the inforec in ECC. What could the likely issue. I have even deleted the corr. ext procurement relationship in APO.
Some pointers would be appreciated.
what does the inforec log say: source and desination location same.
what did i do > excluded the material and the locations and the inforec# from corr. # named models as only the inofrec exclusion did not solve this error.
Regards,
Lok
Loknath,
Are you getting a failed inforecord queue, or are you getting a failed purchase order queue?
I hope you are aware that just inactivating a CIF model won't delete any data that already exists in SCM. Depending on the type of queue that you have failing, the 'bad' master data may already exist in SCM, and that is what is creating your error.
An important thing to remember is that you have to be very structured in your troubleshooting. Each time you try something new, you must clear all errored queues first. Otherwise, you may end up looking at an error that had been generated from the previous experiment, and assume that the current experiment had generated the error.
Rgds,
DB49
Similar Messages
-
Error in SAP APO Inbound: capacity requirement is invalid
Hi Experts
I am getting an error in APO Inbound in APO queue manager. The error text reads " Capacity requirement is invalid".
I checked for all the resources whether they have validity and also checked for mismatching control key. But these fields are allright in both ECC and APO system.
I checked note # 924562, but i am still not able to solve this issue.
Can you please suggest how should i debug this error?
Many Thanks!!
Regards
MansiHi Mansi,
Were you able to replicate the issue on which activity triggers this CIF error?
I remember a similar error which happened when converting planned order to production order where it was giving error"“Bucket capacity requirement has an invalid value” .
SAP had suggested to implement note 1381483 to fix this.
Thanks
Ajay -
SAP System inconsistency for Inbound delivery / MIGO and a "sap note"
Hello Friends ,
After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
- Inbound delivery storage location cannot be changed to here Message no. VLA316
the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
also another error like
- Inbound delivery batch cannot be changed to *** here
which doesn't make any sense because there is not batches in the inbound document !!
i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound indicator at the shipping parameter at client level customization
i need help on how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situationHi,
The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note: 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
Regards,
AKPT -
APO Livecache DB Backup and Livecache Auto Log Backup
Hi Guys,
Could you please help me here which tranaction code we use to check APO Livecache DB Backup and Livecache Auto Log Backup
Thank youHi,
Livecache DB and log back up looks like can not be accessed from SAP. Database Manager GUI is used.
Please check the below link for helpful information.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/499e3c1fbe8c15e10000000a114084/content.htm
Regards,
Saravanan V -
Link between Inbound Idoc No and Shipment No
Can anyone tell me in which transparent table the link between the Inbound Idoc number and Shipment number are stored ?
or is any function module in which the Shipment number is imported and the Idoc number is exported ?
Thanx in advance.
Regards.Hi Deepa,
Please reward and close your other related post. Now here is the answer for this.
As I mentioned in response to your previous post, this is stored in the status records of the IDoc. So you need to go to table EDIDS with your IDoc number and STATUS = 53(Application Document Posted). Read teh value in the field 'STATXT'. If there are any & they should be replaced by 'STAPA1', 'STAPA2', 'STAPA3' and 'STAPA4' depending on how many '&' you have.
One of these 4 parameters will be your shipment number, typically it will be STAPA1.
Let me know how it goes.
Regards,
Srinivas -
Which table stored the Inbound ASN IDOC # and corresponding In.B Delivery#
Hi,
May i know which table stored the inbound ASN IDOC# and corresponding created Inbound Delivery number??
Thanks!!Dear Hoo Laa,
You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
Regards
Samier Danish -
Inbound email receiving and processing: push and pull
Hi Experts
i know there are 2 alternative ways to configure the inbound email receiving and processing: push and pull
(see also /people/cathy.ma/blog/2009/06/23/introduction-to-the-interaction-center-agent-inbox)
My question is: what if i configured the email in push and, at the end of day, some emails are not already read by the Contact Center Operator ?
The day after will the agent see those unread email in the push queue, or in pull in the Agent Inbox (thus transforming them into work item) ?
Those emails are not lost. True?
Maybe it is a simplistic question
thanks for the support
Angelo T.Hello Angelo,
No, actually. ICI interface "push" emails are handled just like a telephone call. You would never leave a telephone call sitting in the queue at the end of the day, and its the same with ICI emails. The key here is that ICI is real time! This is quite a different approach than the SAPConnect interface which uses workflow to route the emails to an Inbox (virtual queue). In the Inbox case, of course an agent would see lots of emails sitting in the queue the next day. Hope that helps!
Regards,
John -
Business Content Extractors for Inbound Deliveries (again!!!)
Dear all,
although we had the same question already in january, but as there was no solution at all, I have to ask the question how I'm able to extract <b>in</b>bound deliveries to BW. They are stored in LIKP/LIPS, but somehow the standard extractor 2LIS_12_* filter the corresponding document types.
Thanks for your help,
AndreasHi Andreas,
Have you tried by using R/3 LIS Structures (those named SXXX). You can try checking if you have anyone that is useful or you can create a new one and see in R/3 if it gets the information you need. Maybe you'll need help of an SD consultant. The transaction used to create those structures is MC21.
Then you will need to create the datasource by using transaction LBW0.
Hope this helps.
Regards,
Diego Lombardini -
Inbound delivery agains service sales order
Dear All,
i am raising service order in my client business but for this sales order i need to take some materials from the customer it is opposit to sub contracting in mm
please let me know how can i map this scenario
Thanks n regards
SiriHi Kimberly,
In these type of scenario, generally company maintain the two plants.
One for delivery and second for receipt the goods from customer (Which are coming for servicing or maintenance).
I think you are directly go to VL01n and enter the shipping point, date and order, when you enter then system shows you this error.
Do one thing,
Go to VA02 --> Enter your order number --> Enter --> On overview screen --> Click at "Sales document" (Menu) --> Click at "deliver"
it will directly take you the delivery overview screen.
Please try and revert back with your findings.
Regards,
MT -
Custom Lync reporting to get inbound number list and call duration
Hi Guys,
I know this is going to be complex but surely a Lync SQL expert can assist here.
I would like to create a custom report of all inbound call received over a period of time with the call duration. The default reports does not have features to narrow down based on calling numbers. Is there any way that I can get a big extract for all the
calls received by the firm and later I can use vlook up etc to get what I want.
I am not good with sql but this I think
https://northernlync.wordpress.com/2014/03/10/lync-2013-creating-custom-lync-reports-within-monitoring/ will do the trick. Has any one tried it?
Any suggestions?
aman sahniHi,
Base on my knowledge, you can custom Lync Call Details Reports with the help of the link you provided above.
The first step to creating a custom call details report for use with the pre-existing Lync Server Monitoring Service Reports is to establish a secure connection to the SQL Server and LcsCdr database objects that will be used as data sources for any new reports.
Next, access will be provided to the user-defined database objects that reside in the LcsCDR database. Once the data is accessible, then it is time to present it by using the SQL Server Report tool.
More details, it is for Lync Server 2010, but similar for Lync Server 2013:
http://blogs.technet.com/b/nexthop/archive/2012/01/12/how-to-create-additional-lync-server-2010-call-details-reports-part-2.aspx
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support -
Automating Cash Journal Posting using inbound proxy interface and upload program
Hi Experts,
I have a requirement where in cash journal posting needs to be carried out automatically by an inbound interface on a periodic basis and at the start during cut over an upload program needs to be used to upload beg balance data . For this purpose I have used BAPI_CASHJOURNALDOC_CREATE to save cash journal entries along with BAPI TRANSACTION COMMIT.
Once the Data is successfully saved I am using FM FCJ_GET_DATA_FOR_SCREEN to get prerequisite data for the FM FCJ_POST_ALL which is used by the Standard cash journal program internally to post the saved data. ( I got this by debugging the standard transaction and both FMs are not yet released )
The issues I am facing is that the the FM FCJ_POST_ALL does not always post the data it behaves in random fashion i.e some times it posts the entries where as sometimes it does not post the entries.
I have tried using commit work after the FM but that also does not result in consistent behavior of the program. One more issue is the i am not allowed to use commit work in a an inbound proxy so how do i proceed ?
I am attaching the code for further analysis:
DATA: LIT_TCJ_TRANS_NAMES TYPE TABLE OF TCJ_TRANS_NAMES,
LWA_TCJ_TRANS_NAMES TYPE TCJ_TRANS_NAMES,
LV_WAIT TYPE BAPITA-WAIT VALUE '1',
LV_RECORD_NO TYPE SY-TABIX.
DATA : LIT_POSTING TYPE STANDARD TABLE OF ISCJ_POSTINGS,
LIT_WTAX_ITEMS TYPE STANDARD TABLE OF TCJ_WTAX_ITEMS,
LIT_SPLIT_POSTINGS TYPE STANDARD TABLE OF ISCJ_POSTINGS,
LIT_CPD TYPE STANDARD TABLE OF TCJ_CPD.
DATA: LV_BEG_BALANCE TYPE CJAMOUNT,
LV_TOTAL_RECEIPTS TYPE CJAMOUNT,
LV_TOTAL_PAYMENTS TYPE CJAMOUNT,
LV_TOTAL_CHECKS TYPE CJAMOUNT,
LV_RUN_BALANCE TYPE CJAMOUNT,
LV_RUN_CASH_BALANCE TYPE CJAMOUNT,
LV_NUMB_OF_REC TYPE I,
LV_NUMB_OF_PAYM TYPE I,
LV_NUMB_OF_CHECKS TYPE I.
DESCRIBE TABLE GIT_CJ LINES GV_TOTAL_RECORDS.
SELECT MANDT COMP_CODE TRANSACT_NUMBER LANGU TRANSACT_NAME LONG_TEXT
FROM TCJ_TRANS_NAMES
INTO TABLE LIT_TCJ_TRANS_NAMES
WHERE LANGU = GC_EN.
IF SY-SUBRC <> 0.
MESSAGE 'No Business Transaction maintained for Company Code in this client'(016) TYPE GC_I.
LEAVE LIST-PROCESSING.
ENDIF.
DESCRIBE TABLE GIT_CJ LINES GV_TOTAL_RECORDS.
LOOP AT GIT_CJ INTO GWA_CJ.
LV_RECORD_NO = SY-TABIX.
CLEAR: GS_HEADER_BAPI,
GS_CJ_KEY,
GWA_ITEMS.
REFRESH: GIT_ITEMS,
GIT_RETURN.
GS_HEADER_BAPI-COMP_CODE = GWA_CJ-BUKRS.
GS_HEADER_BAPI-CAJO_NUMBER = GWA_CJ-CJNR.
GS_HEADER_BAPI-CURRENCY = GC_PHP.
CLEAR LWA_TCJ_TRANS_NAMES.
READ TABLE LIT_TCJ_TRANS_NAMES INTO LWA_TCJ_TRANS_NAMES WITH KEY COMP_CODE = GWA_CJ-BUKRS
LANGU = GC_EN
TRANSACT_NAME = GWA_CJ-BTNAM.
IF SY-SUBRC = 0.
GWA_ITEMS-TRANSACT_NUMBER = LWA_TCJ_TRANS_NAMES-TRANSACT_NUMBER.
GWA_ITEMS-P_RECEIPTS = GWA_CJ-CJRAT.
GWA_ITEMS-TAX_CODE = GWA_CJ-TXCOD.
GS_HEADER_BAPI-BP_NAME = GWA_CJ-BPNAM.
GWA_ITEMS-POSITION_TEXT = GWA_CJ-POTXT.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-LIFNR
IMPORTING
OUTPUT = GWA_ITEMS-VENDOR_NO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-KUNNR
IMPORTING
OUTPUT = GWA_ITEMS-CUSTOMER.
PERFORM SUB_DATE_FROMAT_BAPI CHANGING GWA_CJ-BLDAT
GS_HEADER_BAPI-DOC_DATE.
PERFORM SUB_DATE_FROMAT_BAPI CHANGING GWA_CJ-BUDAT
GS_HEADER_BAPI-PSTNG_DATE.
GS_HEADER_BAPI-REF_DOC_NO = GWA_CJ-XBLNR.
GS_HEADER_BAPI-ALLOC_NMBR = GWA_CJ-ALLNO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-KOSTL
IMPORTING
OUTPUT = GWA_ITEMS-COSTCENTER.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-PRCTR
IMPORTING
OUTPUT = GWA_ITEMS-PROFIT_CTR.
APPEND GWA_ITEMS TO GIT_ITEMS.
CALL FUNCTION 'BAPI_CASHJOURNALDOC_CREATE'
EXPORTING
HEADER = GS_HEADER_BAPI
IMPORTING
COMPANY_CODE = GS_CJ_KEY-COMP_CODE
CASH_JOURNAL_NUMBER = GS_CJ_KEY-CAJO_NUMBER
FISCAL_YEAR = GS_CJ_KEY-FISC_YEAR
CASH_JOURNAL_DOC_NO = GS_CJ_KEY-POSTING_NUMBER
TABLES
ITEMS = GIT_ITEMS
RETURN = GIT_RETURN.
IF GIT_RETURN IS NOT INITIAL.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_E.
IF SY-SUBRC <> 0.
CLEAR GWA_CJ_S.
MOVE-CORRESPONDING GS_CJ_KEY TO GWA_CJ_S.
CLEAR GWA_RETURN.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_S.
IF SY-SUBRC = 0.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_S-MSG.
CLEAR GWA_RETURN.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_I.
IF SY-SUBRC = 0.
CLEAR GWA_CJ_E.
CONCATENATE GWA_RETURN-MESSAGE GWA_CJ_S-MSG INTO GWA_CJ_E-MSG SEPARATED BY GC_PIPE_FORMAT.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ELSE.
IF P_TEST NE GC_X.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = LV_WAIT.
REFRESH:LIT_POSTING ,
LIT_WTAX_ITEMS ,
LIT_SPLIT_POSTINGS ,
LIT_CPD .
CLEAR: LV_BEG_BALANCE ,
LV_TOTAL_RECEIPTS ,
LV_TOTAL_PAYMENTS ,
LV_TOTAL_CHECKS ,
LV_RUN_BALANCE ,
LV_RUN_CASH_BALANCE ,
LV_NUMB_OF_REC ,
LV_NUMB_OF_PAYM ,
LV_NUMB_OF_CHECKS .
CALL FUNCTION 'FCJ_GET_DATA_FOR_SCREEN'
EXPORTING
I_COMP_CODE = GS_CJ_KEY-COMP_CODE
I_CAJO_NUMBER = GS_CJ_KEY-CAJO_NUMBER
I_DISPLAY_PERIOD_LO = GS_HEADER_BAPI-PSTNG_DATE
I_DISPLAY_PERIOD_HI = GS_HEADER_BAPI-PSTNG_DATE
IMPORTING
E_BEGINNING_BALANCE = LV_BEG_BALANCE
E_RUNNING_BALANCE = LV_RUN_BALANCE
E_RUNNING_CASH_BALANCE = LV_RUN_CASH_BALANCE
E_TOTAL_RECEIPTS = LV_TOTAL_RECEIPTS
E_TOTAL_REC_NUMBER = LV_NUMB_OF_REC
E_TOTAL_PAYMENTS = LV_TOTAL_PAYMENTS
E_TOTAL_PAYM_NUMBER = LV_NUMB_OF_PAYM
E_TOTAL_CHECKS = LV_TOTAL_CHECKS
E_TOTAL_CHECKS_NUMBER = LV_NUMB_OF_CHECKS
TABLES
E_POSTINGS = LIT_POSTING
E_WTAX_ITEMS = LIT_WTAX_ITEMS
E_SPLIT_POSTINGS = LIT_SPLIT_POSTINGS
E_CPD = LIT_CPD.
CALL FUNCTION 'FCJ_POST_ALL'
EXPORTING
I_COMP_CODE = GS_CJ_KEY-COMP_CODE
I_CAJO_NUMBER = GS_CJ_KEY-CAJO_NUMBER
I_CURRENCY = GS_HEADER_BAPI-CURRENCY
I_TYP = 'R'
I_DISPLAY_PERIOD_LO = GS_HEADER_BAPI-PSTNG_DATE
I_DISPLAY_PERIOD_HI = GS_HEADER_BAPI-PSTNG_DATE
* IMPORTING
* E_ERROR_NUMBER =
TABLES
ITCJ_POSTINGS = LIT_POSTING
ITCJ_WTAX_ITEMS = LIT_WTAX_ITEMS
ITCJ_SPLIT_POSTINGS = LIT_SPLIT_POSTINGS
ITCJ_CPD = LIT_CPD
CHANGING
P_BEG_BALANCE = LV_BEG_BALANCE
P_TOTAL_RECEIPTS = LV_TOTAL_RECEIPTS
P_TOTAL_PAYMENTS = LV_TOTAL_PAYMENTS
P_TOTAL_CHECKS = LV_TOTAL_CHECKS
P_RUN_BALANCE = LV_RUN_BALANCE
P_RUN_CASH_BALANCE = LV_RUN_CASH_BALANCE
P_NUMB_OF_REC = LV_NUMB_OF_REC
P_NUMB_OF_PAYM = LV_NUMB_OF_PAYM
P_NUMB_OF_CHECKS = LV_NUMB_OF_CHECKS.
COMMIT WORK.
ENDIF.
APPEND GWA_CJ_S TO GIT_CJ_S.
GV_SUCCESS_RECORDS = GV_SUCCESS_RECORDS + GC_1.
CLEAR GWA_CJ_S.
ENDIF.
ENDIF.
ELSE.
CLEAR GWA_CJ_E.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_E-MSG.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ENDIF.
ENDIF.
ELSE.
GWA_RETURN-MESSAGE = 'Transaction Name does not correspond to any Transaction Number'(017).
CLEAR GWA_CJ_E.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_E-MSG.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ENDIF.
ENDLOOP.
ENDFORM. " SUB_BAPI_CALLHi Experts,
I have a requirement where in cash journal posting needs to be carried out automatically by an inbound interface on a periodic basis and at the start during cut over an upload program needs to be used to upload beg balance data . For this purpose I have used BAPI_CASHJOURNALDOC_CREATE to save cash journal entries along with BAPI TRANSACTION COMMIT.
Once the Data is successfully saved I am using FM FCJ_GET_DATA_FOR_SCREEN to get prerequisite data for the FM FCJ_POST_ALL which is used by the Standard cash journal program internally to post the saved data. ( I got this by debugging the standard transaction and both FMs are not yet released )
The issues I am facing is that the the FM FCJ_POST_ALL does not always post the data it behaves in random fashion i.e some times it posts the entries where as sometimes it does not post the entries.
I have tried using commit work after the FM but that also does not result in consistent behavior of the program. One more issue is the i am not allowed to use commit work in a an inbound proxy so how do i proceed ?
I am attaching the code for further analysis:
DATA: LIT_TCJ_TRANS_NAMES TYPE TABLE OF TCJ_TRANS_NAMES,
LWA_TCJ_TRANS_NAMES TYPE TCJ_TRANS_NAMES,
LV_WAIT TYPE BAPITA-WAIT VALUE '1',
LV_RECORD_NO TYPE SY-TABIX.
DATA : LIT_POSTING TYPE STANDARD TABLE OF ISCJ_POSTINGS,
LIT_WTAX_ITEMS TYPE STANDARD TABLE OF TCJ_WTAX_ITEMS,
LIT_SPLIT_POSTINGS TYPE STANDARD TABLE OF ISCJ_POSTINGS,
LIT_CPD TYPE STANDARD TABLE OF TCJ_CPD.
DATA: LV_BEG_BALANCE TYPE CJAMOUNT,
LV_TOTAL_RECEIPTS TYPE CJAMOUNT,
LV_TOTAL_PAYMENTS TYPE CJAMOUNT,
LV_TOTAL_CHECKS TYPE CJAMOUNT,
LV_RUN_BALANCE TYPE CJAMOUNT,
LV_RUN_CASH_BALANCE TYPE CJAMOUNT,
LV_NUMB_OF_REC TYPE I,
LV_NUMB_OF_PAYM TYPE I,
LV_NUMB_OF_CHECKS TYPE I.
DESCRIBE TABLE GIT_CJ LINES GV_TOTAL_RECORDS.
SELECT MANDT COMP_CODE TRANSACT_NUMBER LANGU TRANSACT_NAME LONG_TEXT
FROM TCJ_TRANS_NAMES
INTO TABLE LIT_TCJ_TRANS_NAMES
WHERE LANGU = GC_EN.
IF SY-SUBRC <> 0.
MESSAGE 'No Business Transaction maintained for Company Code in this client'(016) TYPE GC_I.
LEAVE LIST-PROCESSING.
ENDIF.
DESCRIBE TABLE GIT_CJ LINES GV_TOTAL_RECORDS.
LOOP AT GIT_CJ INTO GWA_CJ.
LV_RECORD_NO = SY-TABIX.
CLEAR: GS_HEADER_BAPI,
GS_CJ_KEY,
GWA_ITEMS.
REFRESH: GIT_ITEMS,
GIT_RETURN.
GS_HEADER_BAPI-COMP_CODE = GWA_CJ-BUKRS.
GS_HEADER_BAPI-CAJO_NUMBER = GWA_CJ-CJNR.
GS_HEADER_BAPI-CURRENCY = GC_PHP.
CLEAR LWA_TCJ_TRANS_NAMES.
READ TABLE LIT_TCJ_TRANS_NAMES INTO LWA_TCJ_TRANS_NAMES WITH KEY COMP_CODE = GWA_CJ-BUKRS
LANGU = GC_EN
TRANSACT_NAME = GWA_CJ-BTNAM.
IF SY-SUBRC = 0.
GWA_ITEMS-TRANSACT_NUMBER = LWA_TCJ_TRANS_NAMES-TRANSACT_NUMBER.
GWA_ITEMS-P_RECEIPTS = GWA_CJ-CJRAT.
GWA_ITEMS-TAX_CODE = GWA_CJ-TXCOD.
GS_HEADER_BAPI-BP_NAME = GWA_CJ-BPNAM.
GWA_ITEMS-POSITION_TEXT = GWA_CJ-POTXT.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-LIFNR
IMPORTING
OUTPUT = GWA_ITEMS-VENDOR_NO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-KUNNR
IMPORTING
OUTPUT = GWA_ITEMS-CUSTOMER.
PERFORM SUB_DATE_FROMAT_BAPI CHANGING GWA_CJ-BLDAT
GS_HEADER_BAPI-DOC_DATE.
PERFORM SUB_DATE_FROMAT_BAPI CHANGING GWA_CJ-BUDAT
GS_HEADER_BAPI-PSTNG_DATE.
GS_HEADER_BAPI-REF_DOC_NO = GWA_CJ-XBLNR.
GS_HEADER_BAPI-ALLOC_NMBR = GWA_CJ-ALLNO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-KOSTL
IMPORTING
OUTPUT = GWA_ITEMS-COSTCENTER.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = GWA_CJ-PRCTR
IMPORTING
OUTPUT = GWA_ITEMS-PROFIT_CTR.
APPEND GWA_ITEMS TO GIT_ITEMS.
CALL FUNCTION 'BAPI_CASHJOURNALDOC_CREATE'
EXPORTING
HEADER = GS_HEADER_BAPI
IMPORTING
COMPANY_CODE = GS_CJ_KEY-COMP_CODE
CASH_JOURNAL_NUMBER = GS_CJ_KEY-CAJO_NUMBER
FISCAL_YEAR = GS_CJ_KEY-FISC_YEAR
CASH_JOURNAL_DOC_NO = GS_CJ_KEY-POSTING_NUMBER
TABLES
ITEMS = GIT_ITEMS
RETURN = GIT_RETURN.
IF GIT_RETURN IS NOT INITIAL.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_E.
IF SY-SUBRC <> 0.
CLEAR GWA_CJ_S.
MOVE-CORRESPONDING GS_CJ_KEY TO GWA_CJ_S.
CLEAR GWA_RETURN.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_S.
IF SY-SUBRC = 0.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_S-MSG.
CLEAR GWA_RETURN.
READ TABLE GIT_RETURN INTO GWA_RETURN WITH KEY TYPE = GC_I.
IF SY-SUBRC = 0.
CLEAR GWA_CJ_E.
CONCATENATE GWA_RETURN-MESSAGE GWA_CJ_S-MSG INTO GWA_CJ_E-MSG SEPARATED BY GC_PIPE_FORMAT.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ELSE.
IF P_TEST NE GC_X.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = LV_WAIT.
REFRESH:LIT_POSTING ,
LIT_WTAX_ITEMS ,
LIT_SPLIT_POSTINGS ,
LIT_CPD .
CLEAR: LV_BEG_BALANCE ,
LV_TOTAL_RECEIPTS ,
LV_TOTAL_PAYMENTS ,
LV_TOTAL_CHECKS ,
LV_RUN_BALANCE ,
LV_RUN_CASH_BALANCE ,
LV_NUMB_OF_REC ,
LV_NUMB_OF_PAYM ,
LV_NUMB_OF_CHECKS .
CALL FUNCTION 'FCJ_GET_DATA_FOR_SCREEN'
EXPORTING
I_COMP_CODE = GS_CJ_KEY-COMP_CODE
I_CAJO_NUMBER = GS_CJ_KEY-CAJO_NUMBER
I_DISPLAY_PERIOD_LO = GS_HEADER_BAPI-PSTNG_DATE
I_DISPLAY_PERIOD_HI = GS_HEADER_BAPI-PSTNG_DATE
IMPORTING
E_BEGINNING_BALANCE = LV_BEG_BALANCE
E_RUNNING_BALANCE = LV_RUN_BALANCE
E_RUNNING_CASH_BALANCE = LV_RUN_CASH_BALANCE
E_TOTAL_RECEIPTS = LV_TOTAL_RECEIPTS
E_TOTAL_REC_NUMBER = LV_NUMB_OF_REC
E_TOTAL_PAYMENTS = LV_TOTAL_PAYMENTS
E_TOTAL_PAYM_NUMBER = LV_NUMB_OF_PAYM
E_TOTAL_CHECKS = LV_TOTAL_CHECKS
E_TOTAL_CHECKS_NUMBER = LV_NUMB_OF_CHECKS
TABLES
E_POSTINGS = LIT_POSTING
E_WTAX_ITEMS = LIT_WTAX_ITEMS
E_SPLIT_POSTINGS = LIT_SPLIT_POSTINGS
E_CPD = LIT_CPD.
CALL FUNCTION 'FCJ_POST_ALL'
EXPORTING
I_COMP_CODE = GS_CJ_KEY-COMP_CODE
I_CAJO_NUMBER = GS_CJ_KEY-CAJO_NUMBER
I_CURRENCY = GS_HEADER_BAPI-CURRENCY
I_TYP = 'R'
I_DISPLAY_PERIOD_LO = GS_HEADER_BAPI-PSTNG_DATE
I_DISPLAY_PERIOD_HI = GS_HEADER_BAPI-PSTNG_DATE
* IMPORTING
* E_ERROR_NUMBER =
TABLES
ITCJ_POSTINGS = LIT_POSTING
ITCJ_WTAX_ITEMS = LIT_WTAX_ITEMS
ITCJ_SPLIT_POSTINGS = LIT_SPLIT_POSTINGS
ITCJ_CPD = LIT_CPD
CHANGING
P_BEG_BALANCE = LV_BEG_BALANCE
P_TOTAL_RECEIPTS = LV_TOTAL_RECEIPTS
P_TOTAL_PAYMENTS = LV_TOTAL_PAYMENTS
P_TOTAL_CHECKS = LV_TOTAL_CHECKS
P_RUN_BALANCE = LV_RUN_BALANCE
P_RUN_CASH_BALANCE = LV_RUN_CASH_BALANCE
P_NUMB_OF_REC = LV_NUMB_OF_REC
P_NUMB_OF_PAYM = LV_NUMB_OF_PAYM
P_NUMB_OF_CHECKS = LV_NUMB_OF_CHECKS.
COMMIT WORK.
ENDIF.
APPEND GWA_CJ_S TO GIT_CJ_S.
GV_SUCCESS_RECORDS = GV_SUCCESS_RECORDS + GC_1.
CLEAR GWA_CJ_S.
ENDIF.
ENDIF.
ELSE.
CLEAR GWA_CJ_E.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_E-MSG.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ENDIF.
ENDIF.
ELSE.
GWA_RETURN-MESSAGE = 'Transaction Name does not correspond to any Transaction Number'(017).
CLEAR GWA_CJ_E.
MOVE-CORRESPONDING GS_HEADER_BAPI TO GWA_CJ_E.
MOVE GWA_RETURN-MESSAGE TO GWA_CJ_E-MSG.
GWA_CJ_E-POSTING_NUMBER = LV_RECORD_NO.
APPEND GWA_CJ_E TO GIT_CJ_E.
GV_ERROR_RECORDS = GV_ERROR_RECORDS + GC_1.
ENDIF.
ENDLOOP.
ENDFORM. " SUB_BAPI_CALL -
IDoc type "DELVRY03" for INBOUND delivery confirmation and Outbound Deliver
Hi ,
We have a requirement where we have to send Inbound delivery confirmation as well as outbound delivery notification to our same customer. (3PL case)
We have a EDI partner who is receiving our messages and transforming them before sending it to customer.
Now my problem is , since I am using same idoc type (DELVRY03) for both cases therefore wondering how my EDI partner will differentiate whether received message is a INBOUND delivery confirmation or OUTBound delivery notification.
regards
ShreyThx for your reply ...
Wondering about the impacts , if I create a new message type like ZDESADV and attach it to DELVRY03.
In this i could have two message types DESADV and ZDESADV.
Will it impact anywhere ?
Regards
Shrey -
Not able to cif transiton data from APO to R/3 and from R/3 to APO
Hi:
I have made all relevant setting as per required for configuration of cif architecture in R/3 and in APO.I am able to cif master data from R/3 to APO but when I am transferring Planned Order from APO to R/3 or Sales Order from R/3 to APO I am not able to tranfer it .Even I am not getting any blocked q.
Even I am able to access remote login to both system by RFC Connection.
Please let me know how to debug it and solve it.
With Regards
Ashish GuptaHi Ashish,
Please try ciffing only one transactional data and then check on the application logs using t-code CFM1 or SLG1 in R/3 and /n/sapapo/c3 & slg1 in APO. This will give you idea where is going on wrong.
Kindly confirm
Regards
R. Senthil Mareeswaran. -
SAP SCM and SAP APO: Best practices, tips and recommendations
Hi,
I have been gathering useful information about SAP SCM and SAP APO (e.g., advanced supply chain planning, master data and transaction data for advanced planning, demand planning, cross-plant planning, production planning and detailed scheduling, deployment, global available-to-promise (global ATP), CIF (core interface), SAP APO DP planning tools (macros, statistical forecasting, lifecycle planning, data realignment, data upload into the planning area, mass processing u2013 background jobs, process chains, aggregation and disaggregation), and PP/DS heuristics for production planning).
I am especially interested about best practices, tips and recommendations for using and developing SAP SCM and SAP APO. For example, [CIF Tips and Tricks Version 3.1.1|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006480652001E] and [CIF Tips and Tricks Version 4.0|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000596412005E] contain pretty useful knowledge about CIF.
If you know any useful best practices, tips and recommendations for using and developing SAP SCM and SAP APO, I would appreciate if you could share those assets with me.
Thanks in advance of your help.
Regards,
Jarmo TuominenHi Jarmo,
Apart from what DB has suggested. you should give a good reading on the following.
-Consulting Notes (use the application component filters in search notes)
-Collective Notes (similar to the one above)
-Release Notes
-Release Restrictions
-If $$ permit subscribe to www.scmexpertonline.com. Good perspective on concepts around SAP SCM.
-There are a couple of blogs (e.g. www.apolemia.com) .. but all lack breadth.. some topics in depth.
-"Articles" section on this site (not all are classified well.. see in ECCops, mfg, SCM, Logistics etc)
-Serivce.sap.com- check the solution details overview in knowledge exchange tab. There are product presentations and collaterals for every release. Good breadth but no depth.
-Building Blocks - available for all application areas. This is limited to vanilla configuration of just making a process work and nothing more than that.
-Get the book "Sales and Operations Planning with SAP APO" by SAP Press. Its got plenty of easy to follow stuff, good perspective and lots of screen shots to make life easier.
-help.sap.com the last thing that most refer after all "handy" options (incl. this forum) are exhausted. Nevertheless, this is the superset of all "secondary" documents. But the maze of hyperlinks that start at APO might lead you to something like xml schema.
Key Tip: Appreciate that SAP SCM is largely driven by connected execution systems (SAP ECC/ERP). So the best place to start with should be a good overview of ERP OPS solution overview, at least at the significant level of depth.). Check this document at sdn wiki "ERP ops architecture overview".
I have some good collection of documents though many i havent read myself. If you need them let me know.
Regards,
Loknath -
Fixing APO time parameters -Chaotic and jumbled
Hi experts,
When i start configuring i could see there is a prevailing confusion in me for a long long time ,,a messed up perception regarding time related parameters in both ECC and SCM ,and few other things too ,would you please help out in clearing the confusion once and for all, please correct me if I am wrong in the last column
Time entity
Guess work
Apart from this fields Where are are the other places .do I fix?
Planning horizon (ECC)
In MD61 screen ,in the just above bottom of screen “from” to “ to”
In MRP parameters ,SPRO
In plant Parameters
SNP horizon
In SNP2 tab of MAT1
PPDS horizon
In PPDS tab of MATI and also in t code where you fix the model/version 000
Planning period (bucket) for SNP --,I want to fix as 1 week.
No idea
Where to fix it?
Planning period(bucket) for PPDS 6 shifts ie 2 days .Where do I fix this 2.
Guess it is in Create model /version screen I guess
Where to fix it ?
Time bucket profile
Is there anything like SNP time bucket profile and PPDS time bucket profile ,is it that I need to make a definition in TR32 individually for SNP and PPDS separately just like SNP PPM and PPDS PPM ,
Storage bucket profile
This suggests the longevity of planning results to stay in the system -after the stated time has elapsed planning datas become defunct,it has no relevance with planning period of SNP or PPDS
How to update the resources in APO,
No idea
SNP horizon ends with beginning of PPDS horizon or the fag end of PPDS horizon
Guess PPDS horizon is a horizon within a horizon
Difference between SNP PPM and PPDS PPM
No idea
Difference between single activity and multi activity resources in RES01
single activity means Single operation in a resource pool.like drilling alone or maching alone
multi mixed means Multiple operation in a resource pool like both drilling and maching
please clear my messed up perception..
thanks
OHIOFor instance, I would be more likely to answer questions posted by someone who was actually in need, as opposed to ""someone who thought this whole forum was just a game to be used to fritter away idle time.""
DB on an average I am getting 3 calls per day requesting to work in APO from big names,i am not trying to eulogise you and your special skills in APO ,but it is fact all these good things are happening because of you and my other friend maclean,I had been sincerely following both of you advice
While as novice your suggestions and ,advice i took it seriously and worked on it ,and it is working towards my favor now.you will not believe me some clients are pleading with air tickets asking to come over there to client site and set right the APO turbulence and make it smooth.
I am not Intelligent but I do have common sense ,and you SDN SAP guys are intelligent and have APO sense; so with my common sense and your APO sense we can make wonders .
i still remember some years back kirkwood made a point blank -sharp talk- advising me " leave your egos at the door and start doing your homework " i took it seriously and am comfortable working with APO now despite being a non -expert-,
may be i am a bit playful in this forum making quirky comments,(in your parlance you call it as 'game' rite)
but DB have you seen me being playful or gamy with you or maclean.,?? sometimes while on "uppers" like caffeine i do play some game on this forum --agreed -but even at that point I will be careful not to game with serious professionals maclean or DB, not out of fear but i have this likeness for people with substance ,sans human pettiness
so the moral of the story is " Together we can make wonders ,Individually we make blunders"
Maybe you are looking for
-
Exception while adding External Jar files in NWDS
Dear Friends, Actually i am adding an external Jar file in my EJB Module in NWDS.I am using this jar file for converting XML to flat file and i am calling this module from Receiver ommunication channel.For this process, i am i
-
Change default setting for search highlight?
Is it possible to keep the highlight feature in the search (RH 7) enabled, but change the default for the Highlight search results box to be unchecked?
-
Hi All, I am totally new to this field so if any body could mail me a step by step tutorial or guide to know the basics of SolMan version 3.2 excluding help.sap links. I will reward points for sure. Thanks Prakhar
-
How to track tab changed event
hi friends , i have created a JTabbePane and added few tabs like, addd tab, delete tab, modify tab.... etc how do i track the evnt when user select different tab . i have to perform few tasks when the tab selectio changes.. so how do i do that pls do
-
Hi, we have ordered following BOM... i dont understand why it is required Cisco Prime Infrastructure & LMS 4.2 also... what is diffence between them...or same..?? item name description