Informatica TT_11185 : No more lookup cache to build by additional concurrent pipeline in the current concurrent source set.
Dear friends,
One of my customer is facing the following issue with execution of three workflows which share the same mapplets (log file below):
My challenge is to understand the issue. I found many posts where the solution to this problem is to go to Session properties --> config object tab --> Additional Concurrent Pipelines for Lookup Cache Creation instead of auto set this to 0 or any numerical value.
But when I look at the log the cache files PMLKUP21053_327682_0_864013W32.[dat/idx] to support mplt_VZA_DIM_ASSET_WID_LKP.LKPTRANS mapplet was successfully created. This means we are not experiencing lack of free space issue.
There are about 15 tasks which we execute simultaneously which all share mplt_VZA_DIM_ASSET_WID_LKP and mplt_VZA_DIM_ORGANIZATION_WID_LKP mapplets. And it is only recenty three tasks started to fail. However if we restart the execution plan all complete successfully.
Could it be that we are facing Informatica setup limits on how many mapplets could be simultaneously executed? Any suggestions are welcome. This is the production issue.
Thank you!
2013-10-24 20:48:11 : INFO : (9068 | DIRECTOR) : (IS | Integration_Service) : node01_obieesvr11 : TT_11183 : Enabled using [1 (auto)] additional concurrent pipelines to build lookup caches. (Session likely will build or refresh [2] lookup caches; [0] on-demand only).
2013-10-24 20:48:11 : INFO : (9068 | MAPPING) : (IS | Integration_Service) : node01_obieesvr11 : TM_6660 : Total Buffer Pool size is 22013248 bytes and Block size is 1220736 bytes.
2013-10-24 20:48:11 : INFO : (9068 | LKPDP_1) : (IS | Integration_Service) : node01_obieesvr11 : DBG_21312 : Lookup Transformation [mplt_VZA_DIM_ORGANIZATION_WID_LKP.LKPTRANS]: Lookup override sql to create cache: SELECT INTEGRATION_ID AS INTEGRATION_ID, SOURCE_SYSTEM_ID AS SOURCE_SYSTEM_ID, SOURCE_INSTANCE_ID AS SOURCE_INSTANCE_ID, ORGANIZATION_ID AS ORGANIZATION_ID FROM T_VZA_DIM_ORGANIZATION ORDER BY SOURCE_SYSTEM_ID,SOURCE_INSTANCE_ID,ORGANIZATION_ID,INTEGRATION_ID
2013-10-24 20:48:11 : INFO : (9068 | LKPDP_2) : (IS | Integration_Service) : node01_obieesvr11 : DBG_21312 : Lookup Transformation [mplt_VZA_DIM_ASSET_WID_LKP.LKPTRANS]: Lookup override sql to create cache: SELECT INTEGRATION_ID AS INTEGRATION_ID, SOURCE_SYSTEM_ID AS SOURCE_SYSTEM_ID, SOURCE_INSTANCE_ID AS SOURCE_INSTANCE_ID, ASSET_ID AS ASSET_ID FROM T_VZA_DIM_ASSET ORDER BY SOURCE_SYSTEM_ID,SOURCE_INSTANCE_ID,ASSET_ID,INTEGRATION_ID
2013-10-24 20:48:11 : INFO : (9068 | DIRECTOR) : (IS | Integration_Service) : node01_obieesvr11 : TT_11184 : Starting additional concurrent pipeline to build the lookup cache needed by Lookup transformation [mplt_VZA_DIM_ORGANIZATION_WID_LKP.LKPTRANS].
2013-10-24 20:48:11 : INFO : (9068 | LKPDP_1) : (IS | Integration_Service) : node01_obieesvr11 : TM_6660 : Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
2013-10-24 20:48:11 : INFO : (9068 | LKPDP_1:TRANSF_1_1) : (IS | Integration_Service) : node01_obieesvr11 : CMN_1671 : Created new cache files PMLKUP21053_393219_0_864013W32.[dat/idx] in directory C:\Infa861\server\infa_shared\Cache for Lookup [mplt_VZA_DIM_ORGANIZATION_WID_LKP.LKPTRANS].
2013-10-24 20:48:11 : INFO : (9068 | LKPDP_1:TRANSF_1_1) : (IS | Integration_Service) : node01_obieesvr11 : DBG_21641 : mplt_VZA_DIM_ORGANIZATION_WID_LKP.LKPTRANS: Index cache size = [89616384], Data cache size = [178962432]
2013-10-24 20:48:11 : INFO : (9068 | DIRECTOR) : (IS | Integration_Service) : node01_obieesvr11 : TT_11184 : Starting additional concurrent pipeline to build the lookup cache needed by Lookup transformation [mplt_VZA_DIM_ASSET_WID_LKP.LKPTRANS].
2013-10-24 20:48:17 : INFO : (9068 | LKPDP_2:TRANSF_1_1) : (IS | Integration_Service) : node01_obieesvr11 : DBG_21294 : DBG_21294 Lookup cache creation completed : (Thu Oct 24 20:48:17 2013)
2013-10-24 20:48:17 : INFO : (9068 | LKPDP_2:TRANSF_1_1) : (IS | Integration_Service) : node01_obieesvr11 : CMN_1671 : Created new cache files PMLKUP21053_327682_0_864013W32.[dat/idx] in directory C:\Infa861\server\infa_shared\Cache for Lookup [mplt_VZA_DIM_ASSET_WID_LKP.LKPTRANS].
2013-10-24 20:48:17 : INFO : (9068 | LKPDP_2:TRANSF_1_1) : (IS | Integration_Service) : node01_obieesvr11 : DBG_21641 : mplt_VZA_DIM_ASSET_WID_LKP.LKPTRANS: Index cache size = [89616384], Data cache size = [178962432]
2013-10-24 20:48:17 : INFO : (9068 | DIRECTOR) : (IS | Integration_Service) : node01_obieesvr11 : TT_11185 : No more lookup cache to build by additional concurrent pipeline in the current concurrent source set.
Congrats to Nonki and ME!!!! =^)
Small Basic Technical Guru - February 2015
Nonki Takahashi
Small Basic: Key Input
Michiel Van Hoorn: "Great improvement."
RZ: "Very nice explanation and examples of key input handling"
Ed Price - MSFT
Small Basic: The History of the Logo Turtle
RZ: "Turtle (Logo) was the first programming language for many, including perhaps some of the Small Basic prorammers. Nice article explaining the history."
Michiel Van Hoorn: "A nice background article and hopefull inspiration for those who want to start in robotics"
Nonki Takahashi
Small Basic: TechNet Wiki Article List
Michiel Van Hoorn: "This is great! Perfect as a local cache of the articles. "
RZ: "A good example"
Also worth a mention were the other entries this month:
Small Basic Known Issue: 29976 - Assignment to Array in Event Handler Needs Time by
Nonki Takahashi
RZ: "This is a very good catch. The workaround mentioned is very helpful."
Michiel Van Hoorn: "Ah, very helpfull if you ever bumped into this"
Welcome to Small Basic by
Nonki Takahashi
Michiel Van Hoorn: "Nice greating"
RZ: "A good introduction page"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!
Similar Messages
-
Hi, I want to buy Adobe Connect for 25 and maybe more attendees by one host (teacher), but I cant find the price of this set up?
Can anybody help me pls?Hm, it seems the new website has obscured the option for purchasing the smaller monthly accounts. You can purchase it here. Adobe Connect | Meetings.
If you need more than the 25 per meeting limit, you can reach out to a reseller of your choice that covers your area, Adobe Connect | Strategic Partners. -
Hi,
I´m trying the "Easy RFC lookup from XSLT mappings using a Java helper class" article and I getting a weird problem.
The result of the RFC lookup called inside the java class is maintained in a kind of cache and I always get the same results independent of the parameters I use in the following calls.
Just after calling a Complete Cache Refresh (SXI_CACHE) I got a new result to the lookup.
If I call in the Interface Mapping Test option it runs fine. However, when I call it from my scenario (SOAP Adapter Sender) the first result of the lookup will be returned until a forced cache refresh.
Any ideas?
Thank you,
Fabiano.Hello Fabiano,
I had the same problem like you had.
The main Problem is that with the example code the request variable is created as NodeList object. In XSLT a variable is somekind of a constant and can't be changed. As the request object is empty after the first request the programm fails at the following line:
Source source = new DOMSource(request.item(0));
So I've created a workaround for this problem.
In the call of the template I've put the request as a parameter object at the template call:
<xsl:with-param name="req">
<rfc:PLM_EXPLORE_BILL_OF_MATERIAL xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<APPLICATION>Z001</APPLICATION>
<FLAG_NEW_EXPLOSION>X</FLAG_NEW_EXPLOSION>
<MATERIALNUMBER><xsl:value-of select="value"/></MATERIALNUMBER>
<PLANT>FSD0</PLANT>
<VALIDFROM><xsl:value-of select="//Recordset/Row[name='DTM-031']/value"/></VALIDFROM>
<BOMITEM_DATA/>
</rfc:PLM_EXPLORE_BILL_OF_MATERIAL>
</xsl:with-param>
With this change the request will be provided as a String object and not as a NodeList object.
Afterwards the RfcLookup.java has to be changed to the following:
package com.franke.mappings;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.PrintWriter;
import java.io.StringWriter;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.lookup.Channel;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.lookup.RfcAccessor;
import com.sap.aii.mapping.lookup.LookupService;
import com.sap.aii.mapping.lookup.XmlPayload;
* @author Thorsten Nordholm Søbirk, AppliCon A/S
* Helper class for using the XI Lookup API with XSLT mappings for calling RFCs.
* The class is generic in that it can be used to call any remote-enabled
* function module in R/3. Generation of the XML request document and parsing of
* the XML response is left to the stylesheet, where this can be done in a very
* natural manner.
* TD:
* Changed the class that request is sent as String, because of IndexOutOfBound-exception
* When sending multiple requests in one XSLT mapping.
public class RfcLookup {
* Execute RFC lookup.
* @param request RFC request - TD: changed to String
* @param service name of service
* @param channelName name of communication channel
* @param inputParam mapping parameters
* @return Node containing RFC response
public static Node execute( String request,
String service,
String channelName,
Map inputParam)
AbstractTrace trace = (AbstractTrace) inputParam.get(StreamTransformationConstants.MAPPING_TRACE);
Node responseNode = null;
try {
// Get channel and accessor
Channel channel = LookupService.getChannel(service, channelName);
RfcAccessor accessor = LookupService.getRfcAccessor(channel);
// Serialise request NodeList - TD: Not needed anymore as request is String
/*TransformerFactory factory = TransformerFactory.newInstance();
Transformer transformer = factory.newTransformer();
Source source = new DOMSource(request.item(0));
ByteArrayOutputStream baos = new ByteArrayOutputStream();
StreamResult streamResult = new StreamResult(baos);
transformer.transform(source, streamResult);*/
// TD: Add xml header and remove linefeeds for the request string
request = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"+request.replaceAll("[\r\n]+", "");
// TD: Get byte Array from request String to send afterwards
byte[] requestBytes = request.getBytes();
// TD: Not used anymore as request is String
//byte[] requestBytes = baos.toByteArray();
trace.addDebugMessage("RFC Request: " + new String(requestBytes));
// Create input stream representing the function module request message
InputStream inputStream = new ByteArrayInputStream(requestBytes);
// Create XmlPayload
XmlPayload requestPayload =LookupService.getXmlPayload(inputStream);
// Execute lookup
XmlPayload responsePayload = accessor.call(requestPayload);
InputStream responseStream = responsePayload.getContent();
TeeInputStream tee = new TeeInputStream(responseStream);
// Create DOM tree for response
DocumentBuilder docBuilder =DocumentBuilderFactory.newInstance().newDocumentBuilder();
Document document = docBuilder.parse(tee);
trace.addDebugMessage("RFC Response: " + tee.getStringContent());
responseNode = document.getFirstChild();
} catch (Throwable t) {
StringWriter sw = new StringWriter();
t.printStackTrace(new PrintWriter(sw));
trace.addWarning(sw.toString());
return responseNode;
* Helper class which collects stream input while reading.
static class TeeInputStream extends InputStream {
private ByteArrayOutputStream baos;
private InputStream wrappedInputStream;
TeeInputStream(InputStream inputStream) {
baos = new ByteArrayOutputStream();
wrappedInputStream = inputStream;
* @return stream content as String
String getStringContent() {
return baos.toString();
/* (non-Javadoc)
* @see java.io.InputStream#read()
public int read() throws IOException {
int r = wrappedInputStream.read();
baos.write(r);
return r;
Then you need to compile and upload this class and it should work.
I hope that this helps you.
Best regards
Till -
Hi All,
I have created a simple console application which will get the Cache from the cache server.
However i am getting the below error. my cache server is up and running. could any one help ?
ErrorCode<ERRCA0017>:SubStatus<ES0006>:There is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following
conditions. Ensure that security permission has been granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the
serialized object size sent from the client.)
Below is the code
static DataCacheFactory _cacheFactory = Initialize();
static void Main(string[] args)
var cache = _cacheFactory.GetCache("Given the Cache name"); // getting an error here
var Key = "mykey";
var obj = cache[Key];
if (obj == null)
obj = "Sample";
cache.Add(Key, obj);
Console.WriteLine("Object added");
else
Console.WriteLine("Object was already in cache");
Console.ReadLine();
static DataCacheFactory Initialize()
var Config = new DataCacheFactoryConfiguration();
var Servers = new List<DataCacheServerEndpoint>();
Servers.Add(new DataCacheServerEndpoint("Given the cache host name", 22233));
Config.Servers = Servers;
var temp = new DataCacheFactory(Config);
return temp;
NavaneethConfig.SecurityProperties = new DataCacheSecurity(DataCacheSecurityMode.None, DataCacheProtectionLevel.None);
After setting the above property it worked!
Navaneeth -
I have a list that has more than 12 columns of type lookup with more than 5000 items and I am using a date field as an indexed column so I can restrict the results to meet the list view threshold. I am also using $select to restrict the columns to
meet the lookup column threshold.
If I run the query below it all works as expected:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Id&$expand=Lookup1
If I run this query it does not work:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Title&$expand=Lookup1
Error:
<m:error xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<m:code>-2147024809, System.ArgumentException</m:code>
<m:message xml:lang="en-US">Value does not fall within the expected range.</m:message>
</m:error>
The lookup column "Lookup1" is using Title as the column's information and this should be working. What is interesting is that changing the lookup threshold has no effect on this but raising the list item view limit does make it work. The
date range is selecting less than 5000 items. So what am I missing here? I just want the Title for the lookup column and my query has about 10 items in it.Looking through the logs the error is thrown due to the following error messages:
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields 84h8
High Field with internal name 'LookupFieldName_x005f_Title' already exists in the field cache
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields ki9p
High Unable to add join related fields to the Query.[Error 0x80070057]
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General xxpm
High Unable to execute query: Error 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General 8e2s
Medium Unknown SPRequest error occurred. More information: 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General aix9j
High SPRequest.GetListItemDataWithCallback2: UserPrincipalName=<removed>, AppPrincipalName= ,pSqlClient=<null> ,bstrUrl=siteUrl ,bstrListName=<removed> ,bstrViewName=<null> ,bstrViewXml=<View
Scope="RecursiveAll"><Query><Where><Eq><FieldRef Name="ID" /><Value Type="Counter">5481</Value></Eq></Where></Query><ViewFields><FieldRef Name="LookupFieldName"
LookupId="TRUE" /><FieldRef Name="LookupFieldName_x005f_Title" /></ViewFields><ProjectedFields><Field Name="LookupFieldName_x005f_Title" Type="Looku ,fSafeArrayFlags=SAFEARRAYFLAG_DATES_IN_UTC
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
The very first message states that it is unable to add join related fields, what could be the possible cause of this? As you can see rather than specifying a date range which I know contains less than 5000 items, even filtering based on ID gives the
same result. -
Automated build server for Arch? (like the sourceforge build system)
Has someone considered some kind of automated build system for Arch?
Something that would work like this:
- It'd have every library and dependency possible installed.
- It'd intelligently read the makefiles produced to see what libraries they used and compare them against a lookup table to see what Arch dependencies they then required. Failing that, it could use ldd and a second lookup table that matched libraries to packages.
- It'd attempt to figure out the target binary to run (again, from the makefiles produced), and then run it. If it worked, it'd be marked as usable. If it didn't work, it'd be marked as needing fixing.
All of these points can fail, especially in the parsing of the makefiles; in each case, this would be noted by the system and user action could be taken.
In operation, it wouldn't take away from users managing their own packages. It'd just provide a secure environment to build packages in, and attempt to automate some of the process. In the best cases, the system would theoretically be capable enough to download a package's sourcecode, ./configure it, make it, make a package out of it, get the package verified as usable, then update the repo with it.
Note the verification step in the previous paragraph: I would never want this to be an automated system. Sure, it sound amazing on paper, and might even work for a little while, but sooner or later something would come crashing down and since repo management is quite a trust-based issue, everyone would freak out and they wouldn't want the build server anymore.
-dav7
Last edited by dav7 (2008-10-17 18:41:22)Who would have access to upload to such a build server? If it's the general public, then this is a security nightmare, as well as a growth curve nightmare. The monetary investment for a project like this would need to come from somewhere.
And yeah, something like this has been considered, and a working proof-of-concept has been sitting around for years. http://projects.archlinux.org/?p=pacbuild.git;a=summary . What this kind of project really needs is someone with some distributed computing smarts and dedication (and time) to get it off the ground in a form that will survive past a proof-of-concept barebones implementation.
One of the largest design challenges would be dependency resolution for batch upgrades. For instance, let's say we update libfoobar, which is depended upon by foo, bar, baz, and batman, the system needs to know that libfoobar needs to be built and installed in order to compile the rest of them against it. -
The photos that I better (improves automatic) are saved on the iphone, but when I transfer them to my PC improvements appear no more, only on iphone. I do not understand why the improvements are just the iphone, and not continue when I transfer the photos to my PC.
Thanks.Chicky, I have searched my computer for "iPod Photo Cache" and 51 folders pop up, plus 3 files (iPodInfo.plist, Photo Database and Image DB Temp.tmp). How do I know which to delete and which to keep? The Apple website page tackling this issue doesn't go into any detail. Thanks yet again.
-
Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record
Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record. When I Delete any Record in Source Table, I expect the same record should be 'Expired' with 'End_Date' with Active = 'N'.
BTW: In 'Table Comp', I have Checked the 'Detect Deleted rows(s) ...'. / ' ... largest generated key' is selected by default..
This is not happening..! My Update and Insert works fine..!Hi
Do you have detect deletes set on Table Comparison?
I also add the Map operations to the output of History Preserving and manage each stream of the Insert/Update/deletes separately and control the record start/effective & record end/Expiry dates with more variables based on the stream req, ie updates to end previous record have record end date set to variable for business or run date set to date - 1.
You only need key gen for inserts (including the deleted record final state)
Use merge to bring back together. -
Revision: 11193
Author: [email protected]
Date: 2009-10-27 13:08:28 -0700 (Tue, 27 Oct 2009)
Log Message:
fix packaged build file for textlayout to accommodate the recent changes made to that project
QE notes: no
Doc notes:
Bugs: sdk-23302
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-23302
Modified Paths:
flex/sdk/trunk/frameworks/build_framework.xmlThere are two main annoying problems with Flash Builder and swc's:
1. Flash Builder doesn't reflect changes made to swc files
Solution : First of all - keep your swc files inside your project folder, you can also disable global swc cache: change as3api.cpp code,refresh swc in flashBuilder bug!
2. Flash Builder breakes content inside swc files (and also popular problem "TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@1f21adc1 to...")
Solution : locate the project .actionScriptProperties file and set useFlashSDK=”false” : Flash Builder 4.7 – useFlashSDK | In Flagrante Delicto!
In this case you can also download latest Apache Flex SDK to target new Flash player versions: http://flex.apache.org/
Hope this helps!
P. -
I want to prevent cache from being deleted after each restart. "Clear history when Firefox closes" is unchecked. User.js files are deleted. Checking "Override automatic cache management" made Cache folder appear in addition to Cache2. After exiting Cache is still there, but upon Firefox re-launching, Cache turns into Cache.Trash and promptly disappears. What to do?
Hello,
I'm sorry to hear that. Can you please try these solution to address your concern.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
Please report back to say if this helped you!
Thank you. -
[SOLVED] Script to clear all but the current packages from cache?
Has anyone written, found such a script, or like to write one?
It just has to delete all older duplicate packages in /var/cache/pacman/pkg/ . After which keeping a superseded copy of packages just comes down to when you use the script.
It would keep the /var/cache/pacman/pkg/ directory slimmer, (though it would still have more than is required in it I know) & ensure a quick recovery through downgrading to a known good package when required.
It would be so easy to run the script before an -Syu --aur so that if you have any problems you still have the superseded version of whatever, that you can downgrade to until the problem is solved
Last edited by handy (2008-12-18 07:37:10)man pacman wrote:
SYNC OPTIONS
-c, --clean
Remove packages that are no longer installed from the cache as well
as currently unused sync databases to free up disk space. When
pacman downloads packages, it saves them in a cache directory. In
addition, databases are saved for every sync DB you download from,
and are not deleted even if they are removed from the configuration
file pacman.conf(5). Use one --clean switch to only remove packages
that are no longer installed; use two to remove all packages from
the cache. In both cases, you will have a yes or no option to
remove packages and/or unused downloaded databases.
If you use a network shared cache, see the CleanMethod option in
pacman.conf(5).
Does "pacman -Sc" not do what you are suggesting? -
Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
JeevaHello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I'm trying to buy more storage on my iPad but when I get to the "buy" button, it has my old Apple ID and I can't go any farther. I've changed my Apple ID on all my devices, logged out, logged back in, rebooted, etc., but that one area still has old one.
You can't buy more storage on an iPad. You are referring to space on iCloud and that probably won't accomplish what you are trying to do.
-
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H.
Maybe you are looking for
-
I have three long and boring DVDs of soccer games that I am supposed to edit into a little video for the soccer team banquet. This is pro bono work and technical quality is not a factor. Is there any way to capture a DVD directly into FCP. I tried co
-
How can I take a very large gif and print it over many pages?
I have a gif image that, if printed, comes out all compacted (read: much too small) on one page. It is so small that it cannot really serve as a poster that I want to hang in my classroom. My desired result is to take the image and somehow split / d
-
I am having trouble reinstalling itunes, I do have a pc with Quick times windows XP and I get error code 2330. I had uninstalled apple support file
-
CR 2008 on Windows 7, with DataDirect drivers
When I creata a new report (or open a current report) and try to create a new ODBC connection (or a current one in the old report) I get error: I select Data source, click Next, add the password (to the OracleXE database) and click Finish. The error
-
JVM Setting of Max Heap Equal To Max Perm Size
Hello, I was wondering based on anyones experience or knowledge if there would be any bad effects in setting the Maximum heap size (-Xmxs) equal to the Maximum Permanent Size (-XX:MaxPermSize)? I have a person that has the following settings of: -nat