Information About Default Operating Mode

Hello,
Someone can help me and give me a good documentation that explain what do the SETBASED mode, ROWBASED, ROWBASED (target only), with schemas it will be exellent.
I know a little the differences between but i will to learn that in detail.
I ask that because we have to make programs that are the most optimize (time of execution) and the Operating Mode is very important.

When a mapping runs in a set-based mode, the rows are processed as a single dataset, with a single SQL statement that is either completed successfully for all the rows or fails if there is a problem with even one row. This is generally the fastest way of processing data.
When a mapping runs in a row-based mode, the data can be extracted from the source one at a time, processed and inserted in the target. If there is a problem with some rows, this is logged and the processing continues.
Needless to say, the set based operating mode is faster in all cases, while the row based operating mode gives more control to the user, both in terms of logging row-by-row processing information as well as in terms of control over the management of incorrect data.
The default operating mode is the set based, fail over to row based mode in which Warehouse builder will attempt to use the better-performing set-based operating mode, but will fall back to the more granular row-based mode if data errors are encountered. This mode allows the user to get the speed of set based processing but when an unexpected error occurs it allows you to revert to row based mode.
The operating modes Row Based (Target Only) and Set Based Fail over to Row based (Target Only) are a compromise between the set based and the row based modes. The âtarget onlyâ modes will use a cursor to rapidly extract all the data from the source, but will then use a row-based mode to insert data into the target, where errors are more likely to occur. These modes should be used if there is a need to use the fast, set based mode to extract and transform the data as well as a need to extensively monitor the data errors.
I am currently writing a paper on OWB performance, and if you are interested, drop me an e-mail ([email protected]) and I will send you a draft version of it.
Regards:
Igor

Similar Messages

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

Retrieve information about the operating system

Hi, I have an Air application and I need to retrieve
information such as local IP address, local computer name and
operating system user. It is possible?
Thanks,
Anselmo

flash.system.Capabilities.os for operating system. IP and
computer name I don't think you can get in ActionScript. You could
get IP with a web service, but computer name... no idea, unless
it's possible to find it in the file system...

Information about default scheduler jobs.

Hi All,
Can someone please let me know what the below jobs are useful for, and what will be the impact of disabling them.
EM_AUDIT_EXT_SCHED_JOB
EM_AVAIL_UNKNOWN_STUCK
EM_BEACON_GENSVC_AVAIL
EM_BSLN_COMPUTE_STATS
EM_BSLN_SET_THRESHOLDS
EM_DAILY_MAINTENANCE
EM_DERIV_RETRY_ACTIONS_JOB
EM_ECM_VCPU_JOB
EM_FEATURE_USE_COLL
EM_GATHER_SYSMAN_STATS
EM_PING_MARK_NODE_STATUS
EM_PURGE_POLICIES
EM_PURGE_RCA_RESULTS
EM_REPOS_SEV_EVAL
EM_ROLLUP_SCHED_JOB'
EM_SLM_CALENDAR_UPDATE
EM_SLM_COMP_SCHED_JOB
EM_SLM_UPDATE_CALNEDAR
EM_SYSTEM_MEMBER_SYNUP
EM_TASK_RESUBMIT_FAILED
EM_TASK_WORKER_43
EM_TASK_WORKER_44
EM_TASK_WORKER_45
EM_TASK_WORKER_7
EM_TASK_WORKER_8
EM_TGT_PROP_CONF_PP
SYSTEM.GATHERSTATS_1534051
SYSTEM.GATHERSTATS_8107742
Thanks and Regards,
Akshay M.

Hi,
By their name we can assume they are Entreprise Manager related jobs. These are probably the jobs meant to keep EM metrics up-to-date.
If you don't use EM at all then I would think they can be disabled. That being said, if they are not particularly bothering you then just let them live their lives.

Generating code in OWB mapping for valid operating modes

Hi all,
When i generate the map in OWB it will generate a code in default operating mode. But it's written in OWB documents that During code generation, Warehouse Builder generates code for the specified default operating mode as well as the unselected modes.
Can i find the generating code for the unselected modes? If possible then how can i find? Plzz help.
Regards,
Sumanta

Hi Sumanta.
If my understanding is right than you are looking for a error handling feature in OWB. Well in such case you need to look at the concept of Shadow Tables in OWB. TO know more about the fucnctionality of shadow tables please follow this link.
Using Data Rules
It has most of the information. If you still hav any clarifications, you can post it here.
I dont know much about operating modes.
Hope this is what you were looking for!

RSTP operating mode

Hi all
I've one question about rstp operation mode and could you answer me
We have a lot of equipment and we have stp in our LAN,it is more than 20 cisco switch, my question is if in this network every devices work in rstp mode but one a couple of from them work in stp mode, Do all of them switch work in stp mode or there are rstp and stp same time?

Hi,
They will be in rstp and stp mode, but both protocols are compatible with each other.
HTH

Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
That's what Firefox sad to me...I was Rich text editing,but I can
not use copy paste on.
I did the same site and Rich text editing with Opera,
and there was no problem.
I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
Pleace,responde to me,I need to fix a problem.
I hope you understanded my Engish!
Thank you...

Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

Is there any information about the E2E form daily operations to TSW mov,

HI, I need information about how PRA handles daliy operations and how does it reflect stocks that afterwards must be be availiable to TSW nominations, Is there any graphic or complete process flow from wells movements to MMstock registration and accounting ?

Thank you Sunil, I would like to know how we transfer product allocation from PRA to MM(ERP). This is the key to allow product be moved with TSW solution and MM accounting.
Stephane Lauzonv told us in a meeting held at Buenos Aires yesterday that this can be acheived with a custom development. If you have any information regarding this development We will be very grateful.
Grretings.
Pablo.

Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!

Hi Steve,
If this is dot mac or Mobile me you can still use IMAP eMail in the iCloud.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

Using JMX to get status information about NetWeaver cluster

Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
Radu

As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt.

I don't see any information about IE 11 if it is 32 bit or 64 bit in indows 8.1 either not in about IE or somewhere else! in windows 7 it it is there you can see it

hi,
I have windows 8.1 and windows 7 both installed on my laptop.
when I open windows 7 and go to start menu I see both version of IE 32 bit and 64 bit.
but when I go to windows 8.1 core edition 64 bit ,I don't see IE 64 bit or normal (32bit). I see only IE and when I go to about IE I don't see there any information about IE if it is 64 bit or 32 bit?
I find it strange because I don't know with which version of IE I am working 32 or 64 bit? I know my IE is 11 but I don't know if it is 32 or 64 bit?
h.david

It's complicated :)
MS changed a lot of things with the release of Win8.
By default, 64bit versions of Win8.0/8.1, will never run 32bit IE.
More here:
http://blogs.msdn.com/b/ieinternals/archive/2012/03/23/understanding-ie10-enhanced-protected-mode-network-security-addons-cookies-metro-desktop.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[Gnome 3.2]Nautilus reacts slowly, information about opening directory

I use the fallback mode in GNOME 3 and Nautilus.
After upgrade to Gnome 3.2
When you select Menu - Location - Home (or any other directory), Nautilus opens this directory. I can move between directories without problems.
However, the information about the opening directory – in the picture, "Otwieranie ..."(which means "Opening ...") – disappears after about 10 seconds, and the mouse cursor changes to the shape a clock.
It's pretty annoying. How do I fix this?
http://i.stack.imgur.com/dCWtu.png
Edit: Sorry if you want move this Topic to "Applications & Desktop Environments"
mod edit: Hello KubAT, please read Forum Etiquette: Pasting Pictures and Code. Thanks. --fsckd
Last edited by fsckd (2011-10-04 14:59:07)

I'm having the exact same issues since the upgrade. My theme is broken too and unless I remove the user menu from the top panel, it stays huge regardless of any changes to the size in the panel properties. My clock also doesn't look/act like it should using the default theme (Adwaita).
My cursor does not change though, probably because I have a /usr/share/icons/default/index.theme file to set the default cursor (this also applies to the DM).
I guess all you can do for now is wait until the themes get fixed to work with GTK 3.2 or just move to another DE, it seems Gnome isn't dedicating much effort to the classic desktop.

Need information about Internal Tables

Hi Every one!
I Need some information about Internal tables. Pls help be above the same.
Thanks & with Regards,
Chandra.

Hi..,

Internal tables 
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Like all elements in the ABAP type concept, internal tables can exist both as data types and as data objects A data type is the abstract description of an internal table, either in a program or centrally in the ABAP Dictionary, that you use to create a concrete data object. The data type is also an attribute of an existing data object.
Internal Tables as Data Types
Internal tables and structures are the two structured data types in ABAP. The data type of an internal table is fully specified by its line type, key, and table type.
Line type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
If a table has a structured line type, its default key consists of all of its non-numerical columns that are not references or themselves internal tables. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty.
The user-defined key can contain any columns of the internal table that are not references or themselves internal tables. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.

Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.

Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be unique or not. Standard tables and sorted tables are known generically as index tables.

Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.

Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
Internal Tables as Dynamic Data Objects
Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.

Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.

Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.

Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
regards,
sai ramesh

Information About Default Operating Mode

Similar Messages

Maybe you are looking for