Information about PFAL txn fields

Hi Forum,
When we replicate data from R/3 to SRM using transcation PFAL we fill different values.
Please help me to understand what these fields are ?
Plan version --> 01
What is plan version and what is the meaning of selection 01 (Current Plan) for this field?
Similarly ..
Reporting period u2013all
Evaluation path
Status vector 1
Transfer mode u2013 UPDATE
Receiv . Partner No
Message type -HRMD_ABA
I hope this is the right forum.
Regards,
Anubhav

Hello Anubhav,
Status Vector
Contains a list of one or more statuses (1 active, 2 planned, and so on) for Relationship infotypes. The list allows you to determine which objects are documented in inquiries/reports, by selecting objects according to the status of their Relationship infotypes.
Plan Version:Contains an abbreviation or code that represents a specific plan version. A plan version is a designated area where you deposit or store sets of information.
Object Type
Contains a code that represents different types of objects.like US,O,P..etc
Object ID:Contains a unique eight-digit number that represents a specific object, such as an organizational unit, a qualification, a business event, and so on for the Object type
Evaluation Path
Contains a code representing an evaluation path. An evaluation path allows you to focus inquiries/reports on objects which are affected by certain relationships.
Example
You may want to focus on objects involved in the relationship construct: organizational unit (O) > position (S) > person (P)
Transfer Mode
The transfer mode determines how data on the objects (= plan version/ object type/object ID) is imported in the target system.
Insert (complete transfer: delete in target system, recreate)
The data records for all of the object types and infotypes from the distribution model are transferred in full to the target system. If one of these objects already exists in the target system, it is replaced in full. In other words, it is deleted in full, and then recreated using the distributed data records.
You can specify a reporting period (data selection period). The system distributes all of the data records that are valid for at least one day between the 'start date' and 'end date'.
When a complete transfer is executed for the first time, the insert mode must be used.
Update (for changes: infotype/subtype records in reporting period)
You can specify a reporting period (data selection period). The data records of the infotype/subtype to be entered are distributed if they are completely within this period.
In the target system, data records of the specified infotype/ subtype are first deleted if they are completely within this period (relationships are only deleted if they were created earlier by distribution). The distributed data records are then recreated.
The change pointers are despatched in update mode.
Partner Number of Receiver
This field contains the partner number of the receiver. The partner number and partner type uniquely identify the receiver.
Infotype
Contains a code that represents a specific infotype. Infotypes allow you to describe object attributes.
Arshad

Similar Messages

Extracting informations about rectangles, lines, fields etc from PDF

I'm looking for a way, to extract rectangles, lines, fields etc from a PDF, for example think of a blue rectangle which is drawn in a Word document, which is later exported to pdf. I need informations about the position of the rectangle, the color, the size, if it is filled or not, etc. Is there something like an API or an SDK which can help me? I searched for quite a time (so please, no RTFM-answers), but the only references I found where about producing PDF or extracting text, images or graphics (oh, just at the moment, I had the idea, that lines and rectangles could be coded as vector-graphics in PDF, could that be possible?).
I'm thankful for all answers and ideas (even if you just post links with informations),
kind regards,
Pivo

Yes, lines and rects are coded as vector graphics (or specifically path drawing instructions) in a PDF.
Adobe offers an SDK around Adobe Acrobat which would enable you to get this information. If you need a standalone solution, we also offer our full PDFLibrary.

Need information about some address fields in DQXI

I need to know the 'Content type' and 'Data field name' of the following address fields in DQXi
1. Alley
2.Building
3. HouseNumber
4. HouseSuffix
5. Lane
6. Pob Line
7. PobNumber
8. Section
9. PrefectureCode
10.DistrictName
11.Mail Stop
12. Postal Code Extension
13. GeoCode
14. Outside CityFlag

Hello Smitha,
Please post this query to the [Enterprise Information Management|Data Services and Data Quality; forum.
That forum is dedicated to topics related to Data Integration (Data Integrator, Data Federator, Text Analysis for Data Integrator, Rapid Marts, and Integration for PeopleSoft Enterprise), Data Quality (Data Quality and Data Insight), and Metadata Management.
The forum is monitored by qualified technicians and you will get a faster response there.
Also, all BO Enterprise Information Management queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Information about document condition field in creation

after creating the sales order the field document condition(knumv) is populated with numeric values . from where this value comes

Hi,
I think it comes from the number range object KONV. ...Tcode...TST5
Thanks
Naren

Report with information about release documents in VKM1

Hello
I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
The transaction VKM2 just gives the release date of the document and not the user.
Where I can find more information?
Regards
Daniel Teles

Hi,
There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
regards

How to get information about PowerPivot options

I was going through the Custom Xml structure present after unzipping a PowerPivot enabled excel file.
My main motive is to extract information pertaining to PowerPivot options present in the Excel File.
It had around 16- 19 Custom Xmls, I had a little confusion and it would be great if you could help me on this :
1. In the workbook.xml.rels file, there is entry for each Cutomxml file. For ex. –
But according to my interpretation, each of these entries must be referenced also. What i mean is that the specific Rel ID i.e. rId30 (for the above entry) must be referred somewhere in the package that is why it is mentioned in the Workbook.xml.rels.
But i couldn’t find it anywhere. So how does Excel does all the mapping that which Custom XML is referred to?
2. I found out that for each table in the PowerPivot window, there is a Custom XML present in the Custom XML’s folder.
But, there are other field also present such as ‘ColumnFormat’, ‘ColumnNegativePattern’, but these are not getting updated whenever I am changing these for any table.
I can get the Column names of the table but how can i find out what Format has been applied to the Column of the tables.
3. Moreover, I found a bunch of Custom XML’s but couldn’t really make sense out of them that what they were pointing to.
For ex. – CustomXml with namespace – Gemini xmlns=”http://gemini/pivotcustomization/a1265ca3-5c9c-4281-be48-a1a026385b0a”
or “Gemini xmlns=”http://gemini/pivotcustomization/IsSandboxEmbedded””
It would be highly beneficial if you can help with these namespaces and their interpretation.
4. I understand that majority information is present in the database i.e. Item.data file and also in the Temp folders when the file is opened.
I got through some files present in the Temp Folder and could get my hands on information about Column Format, Formula in case of Calculated Columns. But how do I find out the exact path for the Temp folder every time I open the file.
I could find some paths in the Item.data file in the BackUpFile nodes but those didn’t exist.
So is there is any way by which I can get those paths.
Sorry if the query is a little long, but I am actually stuck with the above questions acting as bottleneck.
Thanks a lot!!
Sahil Puri

What version of Power Pivot are you on?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

Way to consolidate information about vendors

Hello,
I have two or more vendor master data , that have different vendor no (LIFNR) but they relate to same vendor.
Example: Vendor A Vendor B , different ID but relate to the same vendor.
It is happened usually in cases that the VAT.Reg no. is changed and than I need to open another record in the vendor master data for the same vendor.
I need to find way when using control reports (LIS, BW, ME2L,ME2M..) to vendor B (LIFNR) the system will show also information about vendor A.
I need, standard way to consolidate information for two different vendor master data that relate to the same vendor.
Best Regards
Hadidit

you create new vendor and continue your business with the new vendor, but want the old vendor as well in the reports.
I dont think that there is anything available in standard SAP that you can automatically get both vendors into a e.g. ME2L report when you enter one vendor number in the selection.
I cannot imagine thatyou can run MR2M reports based on partner functions .
in vendor master control view is field called Group key that can be used to link old and new vendor number
f1 help says:
If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are possible.
But I have not seen this field in selection of ME2L.

Information about structure SWNCAGGUSERTCODE

Hi,
does someone have some information about structure SWNCAGGUSERTCODE (workload statistics)
I'm interested in the fields tasktype and those count/dcount/ucount/bcount/ecount and scount fields. In addition: if a transaction is called, is the corresponding report counted as well? so do i have transaction with count 1 and not the report or do i have transaction count 1 and report count 1?

no answer

Information about Services

Hi,
we are using SRM 5.0
I need information about services in SRM
so, we have two types of product - material and service.
we have already tested shopping, bidding and other functionality with material. It is clear for me.
now it is time for service testing, and i have some questions:
1. When employee goes shopping - he chooses "Internal Goods/Services", then he click "Start". And a very long list of materials and services is displayed. Services and materials are mixed in alphabetical order.
Are there some ways for dividing this big list in two parts - materials and services? not to sort all of them by descending/ascending order, but to separate them, because to look for something in mixed list is impossible.
Can we make Product Type field to be mandatory for entering before displaying the results? I mean having a binocular near this field, and clicking on it will give us a chance to choose Services or Materials. It will make more simple the whole process.
2. After adding to a SC, are there any differences between processes with Materials and Services? Or no differences, and the same biddings, auctions and others..
3. What is the "Requests" menu in Go Shopping? for which purposes i can use it?
4. Managing Business Partners and it's employee, i have a check-box "service agent". Where this status of partner is use? i can't see in the shopping cart any fields for choosing a service agent
Will be very greatful and award points for helpful answers.
thnx

Hi,
1.Getting a F4 help for the field Product type would be standard modifictaion.However you could try mdofiying the O/P list which is displayed(e.g. sort it based on the product type).
Have a look at this thread for more pointers:
Re: Change in product display
3.Related thread:
"Request" menu option is for... ? :-(
BR,
Disha.

An information about follow up transaction document

Hi all,
How can i retrieve information about follow up transaction document. I need to know which table or anything else that can give me information about follow up document.
For example if i have this business scenario :
from contract --> follow up to order
and i need to know how many contract that being follow up to order and how many didn't.
So which table that have information about this in crm?
Thanx.
Regards
Indah Puspita

Hi @all,
the question is quite old, but not yet solved. As I had a similar task to do, i found something in the database that solved my task and probably yours as well.
There is a DB table called "CRMD_BRELVONAE" that contains relationships between all the different CRM Objects.
field "OBJGUID_A_SEL" contains the GUID of the parent object (equals CRMD_ORDERADM_H-GUID) and "OBJGUID_B_SEL" contains the GUID of the child object (Follow-up, equals CRMD_ORDERADM_H-GUID) .
If you are only interested in a specific type of relationships, there are also fields "OBJTYPE_A_SEL" for the object type of the parent object and "OBJTYPE_B_SEL" for the object type of the child object.
I hope, this is for you helpful
Regards
Ralf

Extract information about Travel Management

Hi !!
I need to work on extractor to get information about Travel Management, the user's need to know how much the company spend on travel.
I read some documentation about 0FI_TV_01 and 0FI_TV_02, But I don´t know where I can get more information about how to activate this extractor's and how work on R/3 and connect with BW (7.0)
At this time I konw how work 2LIS_02_ITM and how this extractor was configured and activated on R/3 Systems and their connection with BW.
Please, If you know some documentation or you can send me one tutorial about this extractors, just let me know
I will assign points to you.
Thank you.
Alice

Alice,
My working week is Sunday -Thursday.
It is true that you can see if an extractor is delta-enabled by looking at the table value. It is also apparent in the info-package.
However, the value in the table is not the reason why the extractor is delta-enabled. There is an extractor program which handles the extraction, which, for these extractors have been programmed for full extraction.
Delta extraction in principle is programmed based on certain fields like a change/creation date. Sometimes the business process i.e 'management of the travel scenario' may not be readily amenable to programming data-extraction.
In short, you do not have a quick solution for making these extractors delta-enabled.
There has been some discussion in this forum on the concept of pseudo-delta - take a look at the link below:
Pseudo delta
BR/
Mathew.
Edited by: Mathew Muthalaly on Apr 6, 2008 6:59 AM

Logging query with information about ip client machine address

Halo,
One of our most important requirements is logging user query (physical to database and logical) with following informations:
- USER
- SQL QUERY TEXT (logical/physical)
- DATE and TIME executing query
- IP ADDRESS client machine (or name of client machine) (this is very important information)
We have following configuration:
- BI Server with Presentation Servicess on one machine (AIX)
- Web server on second machine (BEA Weblogic 9)
I've tested [USAGE_TRACKING] mechanism but thera are three problems with it:
1. in S_NQ_ACCT in field NODE_ID is always written the same information: name of Web Server - WebLogic
2. in S_NQ_ACCT are storages only logical queries.
3. Length of field QUERY_TEXT is 1024. I'm sure that in many cases it'll be to short.
I've tested USER_LOG too (that logs to NQQuery.log file) but there are also some problems:
1. there is no information about ip client machine but is information about physical and logical queries and other necessary informations
2. oracle recommends turn off this mechanism on production system.
I've tested PRESENTATION SERVICESS log (it is configured at logconfig.xml file)
1. In file is information about ip client machine
2. In file are written only logical queries (this is big problem we also need physical queries)
Do you have some idea how to resolve my problem?
Regards

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

Information about PFAL txn fields

Similar Messages

Maybe you are looking for