Information on guidelines in ifrs on revaluation of assets

what all information is necessary to successfully implement ifrs for assets. for e.g studying as 10 and as 28 etc. what all other informations should be kept in mind for successful implementaion for ifrs in sap. which ifrs is for assets its valuation and revaluation?
what are the guidelines of revaluing assets under ifrs for assets.

Hi,
Please refer the below IAS Standards....
IAS 23
IAS 40
IAS 36
IAS 28
IAS 16
Regards,
Krishna Kishore

Similar Messages

  • Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive.

    Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
    Mac is running OS X v10.6.8, Safari should be 5.1.10. Or  Mac OS X  /  Version  10.6.8  /  Build 10K549 / Serial Number W8****ATM  /  Processor 2.4 GHz Intel Core 2 Duo  /  Memory 4 GB 1067 MHz DDR3 or More Info:
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro7,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2,4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 4 GB
      Bus Speed: 1,07 GHz
      Boot ROM Version: MBP71.0039.B0B
      SMC Version (system): 1.62f7
      Serial Number (system): W80394HFATM
      Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
      Sudden Motion Sensor:
      State: Enabled
    <Personsl Information Edited by Host>

    buy an external HD   1TB for $60
    NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
    Unless youre using it every couple weeks, its static data and should be on an external HD
    In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace.  You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
    Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
    Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

  • Revaluation of Asset for past year

    Hi,
    My client had asset revaluation( reduction in asset value)  in Dec. 2009. Because of lack of resource at that time, they carried out this revaluation in strange way.
    They didn't reduce the asset value in APC account of asset  but to report the effect of revaluation in their P& L and balance sheet they passed manual JE between newly created depreciation and accumulated depreciation account. This accumulated depreciation account is not reconciliation asset account in system.
    They closed their books for 2009.Now they want to show this revaluation in asset value by opening 2009 books and reversing the manual entry in system.
    I know that individual account balance will change by doing this in ABAW but the total value in Asset and Gross profit will not change. They are fine with that. I tested into the system its working.
    Now my problem is they had also carried out depreciation run for 2010 based on old values of asset in sap. and adjusted balance sheet by passing manual entries for two month.
    Now if I change value of asset in 2009 Dec. System is now allowing me to rerun (repeat run in AFAB)  the depreciation for JAN and FEB  to post the new values in depreciation and accumulated depreciation account based on new value.
    When I tried to run depreciation for march in test run system adjusted values for JAN and FEB. in March based on new values posted for Dec.2009.
    Is there any way I can rerun depreciation in Jan and Feb to post new values based on posted Dec values? The whole purpose is to correct the posted values in Asset apc account, depreciation account and accumulated depreciation account starting in Jan 2009 and onwards based on reevaluated asset values in Dec2009.
    If anyone knows the way to carry out this, I appreciate the guidance.
    Thank you.

    Hi Murali,
    Thank you for your reply.
    My only concern is - I don't want to affect the other depreciation areas (in case anything changed in their depreciation keys).
    Is there a way to just open past years only for this particular depreciation area and to rerun depreciation just for it?
    I thought of OAAR transaction - undo year end closing by Depreciation area - just to focus on it. Do you think it might work the same as AJRW, or should I use AJRW?
    Can I  run AFAR only for the selected depreciation area and it will not affect any other depreciaton area? We are using 4.6C version.
    Thank you,
    Karol

  • Depreciation on revaluated fixed asset

    Dear Experts,
    I have revaluated fixed assets. My query is that, while posting depreciation on this revaluated FA, the depreciation should be calculated from the asset value date mentioned in the master record of the fixed asset or system should calculate depreciation from the asset value date mentioned in the 'revaluation posting transaction'?  How it is calculated in the general practise in asset acccounting? This depreciation should be calculated on the new acquisition and production cost.
    Please help
    Thanks and regards
    Aniruddha.

    DEAR
    if you using AB01
    the config for posting revaluation in book dep area 01 is as follows:
    > in the dep area 01 mark fields,revaluation,transfer of reserve and rev ord dep as all values allowed.
    >in specify intervell and posting rule mark revaluation button on.
    >AO90  assign the gl account in the asset classes which have to be revalued in assign g/l accounts area.
    >   if going for one time rev .give seperate rev measure.in define rev measure screen.
    >   post revaluation in abaw.
    >   while running afab the amount will get posted make sure it is planned posting run
    MAKE SURE THIS FACT AB01 INCREASES YOUR BOOK VALUE BY REVALUED AMOUNT. BUT IF YOU WANT NEW VALUATION POST NEW VALUATION THROUGH AR29N
    if you using  AR29N go to new valuation of asset tab.
    for using that you 1st need to create a transaction type in AO73 with credit transaction, doc type --aa , post gross ,do not post to affiliated company. go back and limit transaction to dep area.
    define reval measure
    now revaluate asset in AR29N
    regards
    rohit

  • Hi do you have any information and guidelines on developing FLEXCUBE applications and information on bank architectures please.

    Hi can you assist me to develop withe FLEXCUBE and any strategic architecture information Please?

    Apple's response on your first issue:
    http://docs.info.apple.com/article.html?artnum=302773
    I agree that the second issue is kinda annoying (alphabetic listing of all songs when browsing through Artists -> [artist name] -> All)

  • Reporting of Depriciation & revaluation of assets

    Hi Expert
    1.I have posted dep run till Feb'09. However since there is a divestment of investment & holding comp take over the assets of  Subsidiary i need to add the assets from 30.09.2008 from Subsidiary & report the depriciation for Oct'08 to dec'08 . Is it possible
    2. The new assets to be taken from Subsidiary with a higher value i.e at revlalued amount . Can anybody confirn the T code revaluation of the existing assets .
    Regards
    Saroj

    HI boss
    in case of upward revaluation reserve what is the standard transaction type to be used . while i have tried all of them the error is revaluation measure 00 not found . can u pls brief me more .
    Secondly i have not get the answer for my first querry . Whether the dep for Oct;08 can be posted even if the dep run is posted for feb'09
    Thanks is advance
    Regards
    Saroj

  • Revaluating an asset

    Hello All,
    Our client wants to implement the scenario of revalauating the fixed asset according to Indian accounting standard AS28. While going through the Help documents and the posts on forums i came to know that we might have to create a seperate depreciation are for revalauating the asset.
    We are allready using 3 depreciation areas Book Depreciation, Depreciation as per IT Companies act and Book depreciation in group currency.
    My doubt do i still need to create a new revaluation area for revaluation of the asset. Or else we can use the existing depreciation areas.
    Thanks
    Nitin
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Jan 25, 2011 10:22 PM

    Hi Blaz,
    Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
    Thank you,
    Karol

  • Revaluation of assets

    Hi all,
    How to revaluate the assets throu index? what is the main purpose of asset index? what impact will be on the depreciation and interest if the asset indexed?
    kindly give an idea.
    Raghav

    You can use the Recalculate Depreciation function to do so use t-code AFAR, which you can also start as a test run, enables you to recalculate the planned depreciation for a large number of fixed assets. The planned depreciation is adjusted for the fixed assets concerned. The new planned depreciation is used as the basis for subsequent depreciation posting runs using t-code AFAB. I hope this will meet your requirement.
    Regards

  • Add depreciation area to old assets (revaluation area)

    Hi guys,
    I've created a new depreciation area for setting revaluation of assets. This new dep area only contains revaluation of assets (we'll only have revaluation and depreciation of this revaluation in this new area), so I've configured it to manage only revaluation values. Acquisition values are not allowed.
    In OABC i've put "00" in the area where this new area takes values from, due to i don't want thhis new area to copy acquisitions values from area 01.
    I've made the rest of the configuration also, to support revaluation transactions (mov 800) in this new area. But, I've got 2 problems now:
    1. The new area i configured is missing when creating a new asset in AS01. However, when using AS91 the new area shows up. Any idea of why this happens that way?
    2. I cannot add the new area in old assets. When using AFBN a message appears: "Depreciation area 20, which you want to create as a new depreciation area in chart of depreciation PVPE, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area."
    Message makes sense, because my new area is not copying values from any area (in tcode OABC i defined 00 as dep area source). The question is.. is there any additional tcode where i can add the new depreciation area to old assets?
    Thanks in advance.
    Eduardo

    Hi,
    there are the following steps:                    
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :
       3.1 - Indicator: Leave values initial = not ticked.              
               The system will copy all the past years values from      
               depreciation area 01.                                                                               
    3.2 - Indicator: Leave values initial = ticked.                  
               Set this indicator if you want to open the newly created 
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.     
    Following notes for information:
    430618     Procedure for setting up new depreciation area   
    857601     Parallel currency area and RAFABNEW              
    301113     Restrictions of RAFABNEW        
    A Documentation you can find in SE38 entering the   RAFABNEW and press the button documentation.
    regards Bernhard

  • FI configuration for IFRS reporting

    Hi Experts
    I Need to Configure IFRS Reporting for the asset Module,  can you please give me detail information regarding IFRS reporting for Asset module (Indian Scenario)
    Moderator: Please, search SDN

    If the FG is maintained on price control 'S' i.e. std price, system any way will post the difference to price difference account when you do settlement or order. The relevant account will have to be mainatined in OBYC for PRD.
    Regards
    Rakesh Pawaskar

  • SAP R/3 information

    Hi all,
    Currently I am working on ERP R/3, can anyone please give me some information or guidelines on it?
    Updates like creating data and macro in it. it would be helpful to me.
    Regards,
    Nick

    Hi,
    Pls go through the SAP link
    http://www.sapfans.com/sapfans/sapr3con.htm
    Regards,
    Marasa.

  • MM Table(s) listing Invoice information

    Hi,
    I know that table EKKO contains the MM document header information (ex. PO header data), EKPO contains the line item details, EKET contains the delivery informaion for the line item, and EKKN contains Account Assignment information of the line item.
    What table(s) contain the invoice information for the line item?
    Thanks in advance.
    Naing Zaw-Tun

    Hi,
    Every(Valuated) Material Document is having Accounting document.
    Like Matrl Document   5000005120
    Accounting Document  5000018455
    Go to SE11.
    Enter Data base table BSEG.
    BSEG is the Cluster Table.
    Put Accounting Document number. Press Execute.Then you will find all Transactions.You can sort it out the postings based on Line item ID.
    8                " Revaluation
    A                " Asset
    B                " Warehouse stock order
    C                " Warehouse stock order assigned
    K                " Vendor
    F                " Delivery costs
    L                " Warehouse order
    M                " Material
    N                " Assigned order
    P                " Price difference
    S                " General G/L account
    T                " Tax
    W                " GR/IR item
    X                " Purchase order - assigned asset
    Y                " Delivery costs - assigned asset
    Mostly you got it.
    For the same For Invoice.
    Go to SE11 Enter  BKPF,
    Here u get According to the Material document in reference column.
    It displays Material Doument along with year.
    Thanks,
    Raghu

  • Asset Revaluation issue - Reval of Current year depreciation

    Hi All,
    We are setting up the system to do asset revaluation for our company code in South America. My client wants to
    revalue the assets from Jul'09 to Dec'09.
    1) We have maintained inflation indexes for the last day of each period in the year 2009.
    2) Maintained Posting Variants and Time Base and Exposure variant accordingly for all the periods and year as 9999.
    3) Assigned the appropriate Time base and exposure variant in the period control method.
    4) Maintained the Revaluation Areas:
    a) Area 01 - Book
    b) Area 02 - Inflation Adj (Revaluation Area)
    c) Area 03 - Derived (Area 01+Area02)
    d) Area 22 - Infla Adj in Group Currency
    5) Maintained the Revaluation key and assigned it to the relevant Asset classes by Depreciation Area (02 and 22)
    6) Maintained the transaction types as below:
    897 - Revaluation (downward) current year
    892 - Revaluation (upward) current year
    891 - Revaluation (downward) prior year
    893 - Revaluation (upward) prior year
    7) Maintained the Inflation Method and last revaluation date on Inflation method as 01.07.2009.
    8) We have also activated the Revaluation after useful life.
    With this setup in the system I took a test asset which had depreciation postings for the period 08 and 09. When I
    ran the J1AI - Revaluation (Inflation) Program in the test run mode the outcome was that the APC value of the asset
    was being revalued and Revaluation of Prior year Depreciation but not the Revaluation of current year
    Depreciation. Can anyone tell me why current year Depreciation is not being revalued.
    Am I doing something wrong process-wise or configuration-wise?
    Please help me in resolving this issue.
    Regards,
    Raj

    Hi Rajesh Phanibatla,
    I've always happened that Issue. But what I realized is that although the program output (J1AI) does not show you nothing on "Rev of CY Depn", the system calculates. This only happens for the first month of adjustment (In your case, Aug 08).
    Try checking the test asset with the Assets Explorer (AW01N) just after running the adjust (J1AI) in background process (NO test mode) at 31.08.2009. See if the area Area 02 - Inflation Adj (Revaluation Area) on "Posted values" tab shows something different to zero on month 08 with "Planned" status.
    Then, for the adjustment of the following months, the output of the program will show you the "Rev of CY Depn" value.
    If you want, let me know your email to show you a presentation (PowerPoint in spanish) that has screens that I captured on that occasion that happened to me.
    I hope this is your case and can help you that I said.
    Good Look!
    PD: Sorry for my bad english :S

  • NO MORE INFORMATION IN THE ASSET PANEL

    I don't have anymore information when my mouse go to over an asset in the asset panel. Only the name of the file. No more information about original asset size, resampled size and so one.
    I just have a yellow box with name of the asset.
    Is it the new version? Do I have to enable someting?
    ps:apologize for my English...!!!
    Michel

    Hovering mouse over the icons (as indicated below) should give you the required info. Is it not the case with you?
    Thanks,
    Vinayak

  • Revaluation not picking up all documents

    Hi
    The revaluation program is not picking up all foreign currency GRIR documents.  I've checked and the exchange rates are different and the items are open, but when we run the revaluation program it skips certain documents.  Has anyone ever come accross this issue?
    Thanks

    I think that you posted this on the wrong forum.  This is the asset accounting forum.  Revaluation usually refers to the revaluation of assets.  I think that you are asking about currency revaluations.  You shold post your question in the correct forum.

Maybe you are looking for