Information on Query not been used at all
Hello Experts,
Please let me know how can I find queries which have not been used at all.
Queries been used by which User and last used.
please let me know which technical content can be used to find this data so that the table RSDDSTAT has entries.
Thanks,
Santhosh
Hi santosh,
Check for the tables RSDDSTAT_OLAP ( Bw 7.x) and RSDDSTAT (BW3.x) systems.
Here you can get the required info what you are looking for..
You can check the statistics content MP : 0TCT_M01/02 --> also try to install the reports on the top of this MPs where you can find the query usage statistics reports.
Regards
KP
Similar Messages
-
I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
Apple id has not been used with the itunes store-please review your account information
Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.MThis is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet. -
I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!
If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.
-
Shuffle (2nd Gen) not been used for a few years - not working at all - any ideas?
My Ipod Shuffle (2nd Gen) has not been used for a long time and now will not give any reponse at all. It won't charge and it is not recognised by ITunes - is there anything I should do?
Sorry... I did not notice your reply.
The initial blinking is good. That means there is a connection between shuffle and computer. But it should continue blinking or become a solid color (ON but not blinking).
It could be a problem with the battery. If a lithium battery is left completely drained for an extended period, it can become unable to hold a charge. However, it could also be a problem with the USB port (such as not enough available power or a USB device conflict). As a test, you should try shutting down the computer and disconnecting all USB devices, including any hub, except for standard keyboard and mouse (if normally used). If your computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on computer. -
I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "
Hi rixa03!
I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_3
If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?
You should never lose contacts under any circumstances.
Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select. -
I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back? I had tried resetting the network setting, toggling off the sms but to no avail.
Thank you.
RegardsWhat do you mean you choose to send him an SMS because you don't have any connection. What kind of connection? Delete the thread with that individual that you sent via SMS, and as long as you have iMessage activated on your device and your friend has an active data connection, it should recognize that and send as an iMessage. Another scenario is to have the friend send you a message that you can respond to.
-
My iPad was erased and when I try to connect back to game center it tells me that it has not been used in Game Center before when I used to have a Game Center nickname and played a lot. Looks like somehow my Apple ID and my Game Center Nickname have been disconnect.
Is there a way to find out what Apple ID is associated to a Game Center Nickname??Mine did the exact same thing last week.
I did the software update and then the restore and it only restored photos, emails, and iPad settings. It did not restore apps and now my apple ID is no longer associated with my game center ID and I can't figure out how to reconnect them. Any help would be appreciated.
Thank you. -
List AD accounts that have not been used for months?
Hello,
I use oldcmp.exe to show me what computers have not been used for months and I can disable them, but I wish to do the same for users Active Directory accounts, is this possible?
We use AD 2003
Thankssorry for slightly belated reply. I've used another version of this script that doesn't have the GUI interface on it, this will make it easier for you to run from a scheduled task.
copy the code and make the relevant changes to the top section of the script as the comments explain. This will send and email with a link to the report generated.
#Script designed to search AD for inactive user accounts, mark them as inactive and move them to a specific OU then disable them
#Script can be run in the following formats
# 1. Report only
# 2. Report and move account
# 3. Report, move and disable
#Uses quest powershell tools which can be downloaded from http://www.quest.com/powershell/activeroles-server.aspx
#Version 2.0
#Added email functionality
#Denis Cooper
#Setup script Variables
#Change the setting from True to false to alter the way the script runs (only one option can be true)
$ReportOnly = "True" #Generates a CSV file showing all inactive user accounts
$ReportandMove = "False" #Generates a CSV report, moves the users to a specific OU
$ReportMoveDisable = "False" #Generates a CSV report, moves the users to specific OU, and sets the description
#Set the period of inactivity in days
$InactiveFor = "90"
#Specify the OU to search for inactive users - us AD CN if searching enire AD
$SourceOU = "OU=Users,DC=MyDomain,DC=Int"
#Specify the destination OU to move inactive users to is using report and move or report move disable script options
$DestinationOU = "OU=Inactive Users,DC=MyDomain,DC=Int"
#Don't mark anyone with the the specified prefix in the description field to inactive - DND stands for Do Not Disable and is specified
#in the users account description field for accounts which may not be used to login so will show as inactive but that you don't want to disable
#must leave the * after the word for wildcard matching
$DescriptionPrefix = "DND*"
#Specify the description to set in the computer account on ReportMoveDisable option
$Description = "Account disabled due to inactivity on $Today"
#Specify the path to create the csv file (make sure the folder exists)
$ReportFile = "\\server\share\InactiveUsersReport.csv"
#Get todays date and store it in the $today variable
$Today = Get-Date
#Email Settings
$SMTPServer = "smtp-server-name" #replace this with your internal smtp server
$FromAddress = "[email protected]" #replace this with your from address
$ToAddress = "[email protected]" #replace this with your TO address
$CCAddress = "[email protected]" #replace this with your TO address
$Subject = "This is your subject line" #replace this with the subject line for the email
$MessageContent = "
Hello,
Please find a link to the latest report containing users that have been inactive for $inactivefor days
$ReportFile
Please take the appropriate action.
Thanks you,
IT
#NO CHANGES BELOW THIS LINE
Function SendEmail {
$messageParameters = @{
Subject = $subject
Body = $messagecontent
From = $fromaddress
TO = $ToAddress
CC = $CCAddress
SmtpServer = $SMTPServer
Send-MailMessage @messageParameters
#Generates a report showing inactive users
Function ReportOnly {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
SendEmail
Invoke-Item $ReportFile
#Generates report and moves accounts to desitnation OU
Function ReportandMove {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
Invoke-Item $ReportFile
$inactiveUsers | foreach {
Move-QADObject $_ -NewParentContainer $DestinationOU
#Generates report, moves accounts to destination OU, disables the account and sets the description
Function ReportMoveDisable {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
Invoke-Item $ReportFile
$inactiveUsers | foreach {
Disable-QADUser $_
Set-QADUser $_ -Description $Description
Move-QADObject $_ -NewParentContainer $DestinationOU
#Runs the script
#Finds all inactive user accounts which are in an enabled state and store them in the variable $inactiveusers
$inactiveUsers = Get-QADUser -SizeLimit 0 -SearchRoot $sourceOu -NotLoggedOnFor $InactiveFor -Enabled | Where-Object {$_.description -notlike $DescriptionPrefix}
#Checks which script to run
If (($ReportONly -eq "True") -and ($ReportandMove -eq "True" -or $ReportMoveDisable -eq "True")) {
Write-Host -ForegroundColor RED "Only one run condition is allowed, please set only one run value to True and the others to false"
Break
If ($ReportONly -ne "True" -and $ReportandMove -ne "True" -and $ReportMoveDisable -ne "True") {
Write-Host -ForegroundColor RED "No valid run condition was specified, please set only one run value to True and the others to false"
Break
If ($ReportONly -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report only mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
ReportOnly
If ($ReportandMove -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report and move mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU"
ReportAndMove
If ($ReportMoveDisable -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report, move and disable mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU and disabled and their description updated"
ReportMoveDisable
This link should help you create a scheduled task to run the script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
Hi, why can't I use my apple ID even downloading free apps there's a prompt message saying " this ID has not been use to iTunes" what should i do?
That usually means that your payment information is incomplete. Even if you want to download free apps, unless you were able to select "None" as your payment option when you created the ID, you still have to enter a credit card.
There is a very specific way that you have to create an Apple ID if you don't want to use a credit card and I am guessing that is what you wanted to do originally, but you didn't do it correctly. The instructions are in this kb article.
http://support.apple.com/kb/HT2534 -
I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks
Yes, look in Activity Monitor (Applications /Utilities /Activity Monitor.app) and see what it eating up all the %CPU. If anything is over 40%, post the name here to get advice or just kill it straight away with the red 'Quit' button.
If nothing is using up CPU resources, but the fans are going full blast, do an SMC reset. Read the instructions here:
http://support.apple.com/kb/HT3964 -
GPU not being used at all. (gtx 860M). Lenovo Y50-70 laptop.
Hello!
I recently upgraded to windows 10 via windows update and did a clean install after the upgrade. Installed all the neccesary drivers etc etc. The usual drill. I consider myself rather tech savy.
After a few days of casual gaming with LoL i noticed that my Nvidia GTX 860M GPU was not being used AT ALL, only the integrated Intel HD 4600.
This was further proved to be right after I installed Path of Exile and kept getting BSODs each time after around 10 minute of playing with various error messages revolving around the file "igdkmd64.sys". I've tried completely deleting the drivers using safe mode and the driver cleaner program and reinstalling other drivers (ex. the lenovo driver dated 14/7. ) with no luck.
I've tried all the settings within intel hd graphics and nvidia controlpanel. I've also tried checking BIOS. No luck there either.
Both of the GPU's also show up in device management without any issues.
I also tried disabling the intel hd graphics within device managent which resulted in the basic adapters being used and my screen looks bad... My current Nvidia driver is 353.62. I'll post some various screenshots here:
Device management with both activated:
http://bildr.no/image/Rjk3ZFpK.jpeg
Nvidia control panel with both GPUs active in device management:
http://bildr.no/image/L3lYb1ZC.jpeg
This shows up when I try to check Nvidia display settings when intel HD graphics is DISABLED in device management. It basically translates to:
"Nvidia displays ettings are not available. You're not using a display connected to a Nvidia GPU"
http://bildr.no/image/TS85TTZp.jpeg
My display settings options with intel HD graphics being disabled:
http://bildr.no/image/ZUh2SVJV.jpeg
Can provide further information if required. Not sure what you need to know, but bottom line is that my GTX 860M GPU is not being used for anything at all.
i'm assuming that all I can do for now is to either wait for updated drivers from lenovo or to roll back to windows 8.1 (Works fine in win 8.1)?More than a fix I think it has more to do with the graphics drivers and in some cases Windows 10 installation issues.
About the Graphics drivers,
Try uninstalling the NVIDIA GPU in Control Panel > Device manager
Uninstall everything related to NVIDIA in Control Panel > Prgrams & Features
Restart the system and wait for it to install the NVIDIA GPU again.
I would also advise that you try older drivers, if they are available.
About Windows 10 Installation,
I have installed Win 10 twice now. In my previous Win 10 installation my system was running slow, Cortana was not working and couple more issues.
In current installation, everything is working great till now.
What I did different in second installation -
I installed all drivers upgrades for Win 8.1
All windows updates for Win 8.1 before upgrading to Win 10
I downloaded Win 10 ISO and started Win 10 setup from a bootable USB (by running Setup file while logged into windows 8.1)
During upgrade, I did not Apply Updates for Win 10 (Selected the bottom option)
Then windows installed normally
Updates to Win 10 were applied after installation.
-
Equium - Drive E not been used
Hi My Laptop Drive C is nearly full but Drive E has not been used, should this automatically be used or do I have something wrong?
I have been told that the partitions are set wrong? Is this correct, and if so how do I resolve it?
Hope you can help.> My Laptop Drive C is nearly full but Drive E has not been used, should this automatically be used or do I have something wrong?
I assume you have stored everything (all files like pictures, mp3, games, movies, etc) on C partition.
I would not recommend doing this
I use the second partition for my mp3, pictures and movies and all other applications are stored on C.
You can move all the files (mp3, pictures adn movies) to other partition.
But note; if you would move an installed software (like games) to other partition then you will not be able to start it again during installation and setup you will be asked where you want to install an software and there you have to change the path in order to install any software to other partition.
greets -
everytime i sign in to my apple account it says apple id has not been used in itunes store...i have no credit card how to fix this problem?pls help
You need to verify your info and you'll be all good. Let know if you're all good now.
Maybe you are looking for
-
Here is the error report: Process: Safari [266] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 6.0.4 (8536.29.13) Build Info: WebBrowser-7536029013000000~2 Code Type: X86-64 (Native) Pare
-
Storing MS Word, MS Excel, PDF, etc in DB and retrieving through WebForms
Hi, We have an application that requires storing MS Word, MS Excel, PDF and HTML docs. We're planning on storing these documents in a table as BLOB's with a column in the table that would indicate the MIME type for the document. We need to be able to
-
Issue adding Auto-renewable in-app purchase type via App Loader
I have a Pro DPS account and a Multi-folio with iTunes subscription Newsstand app. I'm attempting to add paid 6-month and 12-month subscription options to what has previously been a Free subscription app. I also want to charge for back-issues, and ad
-
Reg: Tabstrip tab text change through program.
Dear all, I am using tabstrip in my program, my requirement is to change the text of the tab dynamically in the program . please help me in this regard. thanks in advance. Haritha
-
Creating an ALV grid using SAP Query
Hi , My requirement is to generate an ALV grid Display of an SAP Query. Please let me know the steps. Regards, Bhanu