Infotype header the format
hello,
As you know in the infotype header the format name that the screen shows is diferent
for USA: Last Name , Name
for MEX version : Name , Last Name
I need both to have the same format (Name , Last Name)
Is that posible?
Best Regards.
Hello,
Sure it's possible.
1º) Open an infotype in pa20/pa30
2º) Go system -> Status
3º) Save the value of Program(Subscreen). E.g.: /1PAPAXX/HDR_00288A
4º) Open Se38
5º) Open the copied header. E.g.: /1PAPAXX/HDR_00288A
6º) Check the comments in blue. The header modifier will be the 2 number on second column. E.g.:
T588J (Table to change the header fields)
002 88 1 01 TXD 0000 PERNR 08 PN1
88 = Header modifier. Save this number.
7º) Open SM31
8º) Table T588J
9º) Open the corresponding header modifier. E.g.: 88
Now you can change the header
If you nede to change the format displayed go thru table T552N and set the value at field "Conversion".
Example:
Conversion = 07 , make this:
Before > After
- GJM > G.J.M.
- ThChr > Th.Chr.
Hope that helps.
Márcio Leoni
Similar Messages
-
Infotype Header Data - Cost center- System to read the latest data
Dear Group Members,
I am modifying Infotype Header data and calling Cost center (Field - KOSTL) in header data via modifying header data in table T588J. The cost center values appears on the header data (As stored in Infotype 0001) however it appears with the oldest data. i.e. if the employee cost center had been changed after his joining system does not picked up the Latest data/ Latest cost center value.
Any one on how to resolve this issue with SAP Standard functionality.
Regards
VISHAL SAXENA
SAP Specialist - HCMHi,
The answer to your question lies in table V_582A_B. You can either access it through SM30 or by following IMG path:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header>Header structure per infotype
There is a u201Cchoose datau201D indicator for each infotype. If that is checked, the header displays data as per the start date of infotype displayed; otherwise, it shows data valid as of system date. Please bring up SAP help on the field by F1 for more information.
Also check table T588H (data selection field) as it has some dependencies for the above mentioned settings. The table can be brought up from:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header> Infotype header data selection control
Hope this helps.
Donnie -
How can I get Numbers to copy the formatting of a table?
I am trying to replicate the AppleWorks spreadsheet that I created to do my monthly finances
My AppleWorks spreadsheet has lots of defined ranges that I'm turning into separate Numbers Tables (so I have to change Many Many Many cell references, which does not seem to be easy in Numbers)
I've formatted one table as I want it - columns for itemizing expenses for the month with column to describe expense. I've got a header column (e.g. "Hobbies") that I'm centering (merge Cells) over the 2 columns for month's expenses and descriptions. Month's expenses columns are narrower than the description columns.
I've tried selecting the table and saving as a named style.
Then, when I create the next table, it starts w/ generic formatting. I clear and apply the style I've just created - _some_ of the formatting is applied to the new style, but not all:
Fill in the header row not applied
Merged cells in the header row not applied
Tinted fill in header row not applied
Centered text of Merged Cells not applied (left justified, instead)
Centered text of Months not applied (again, left justified)
Row heights not applied
Is there any way to copy ALL of the formatting of a table and apply it to another table?Thanks Wayne - I've been working on my AppleWorks to Numbers comversion using the Apple key - D method to duplicate tables.
I do have to retype column headers (these change for each table)
If I could paste formatting, I could copy the entire table from imported spreadsheet, paste formatting, and Wah-Lah.
Oh, Well the Apple Key - D method (re-entering column heads - type once and then Ctrl-C & a bunch of Ctrl-Vs) is WAY easier than reformatting each table manually.
Only slightly painful to have to re-enter all the cell references for the summed-column totals in the sub-tables into the main table
I've been using the same spreadsheet (w/ minor tweaks from year to year) for the past 12 years... it ain't broke & I'm grumpy about fixing what Apple broke - computers are such timesavers... sigh
Win -
How can I export a pages file to a .doc and retain the formatting?
Every time i have tried the export and save as a copy features the formatting gets screwed up and leaves me with strange page margins and all my spacing is off. I have to submit a double spaced document with 1" page margins. I have tried the double space feature in pages and using a single space format and then physically putting a space in between lines. Either way i end up with a single spaced paper with an extra long and wide page on the .doc save/export. Any tips on how to retain the formatting between pages and word?
Dylan
I have emailed back the fixed file and Word Export.
You had a return after every single line. That is not necessary, it is a Word Processor and will wrap text as needed. Just hit return for the ends of paragraphs.
You also had extra returns in the Header, I was unsure of what you wanted there so made it double spaced like the rest.
There is an excellent book "The Mac is not a Typewriter" by Robin Williams, not sure if it is still in print but it is a good read.
Peter -
Need the format for input file for standard program
hi can any one please give me the format in which the file to be uploaded to program RFBIBL00 ,
must be in for example my excel file to be uploaded has the following columns.
company code
accounting doc
line item
fiscal year
doc type
doc date
so is there any program which can create a file in the format to be uploaded taking this excel sheet.
i read the documentation but i am little confused about that.
thank you.Ok.. I have created one small test program for RFBIBL00.
That program uses this file format:
indicator company code fiscal year doc type doc date positng date header text Account posting key amount item text assignment number ....
H 0001 2007 SA 11/21/2007 11/21/2007 Test from RFBIBL00
D 106210 40 123.3 Line 1
D 106210 50 123.3 Line 2
H 0001 2007 SA 11/21/2007 11/21/2007 Test from RFBIBL00
D 106210 40 123.3 Line 1
D 106210 50 123.3 Line 2
Copy this data into one notepad and save it as .txt file. you need to provide this path to the test program.
The source code of the program (Currently it is only test version):
*& Report ZTEST_NP_RFBIBL00
REPORT ZTEST_NP_RFBIBL00.
TABLES: BGR00, " Batch-Input Mappendaten
BBKPF, " Batch-Input Tcode + Belegkopf
BBSEG, " Batch-Input Belegsegment
BBTAX, " Batch-Input Belegsteuern
BSELK, " Batch-Input Selektionskopf
BSELP. " Batch-Input Sel.positionen
DATA: BEGIN OF IT_FILE OCCURS 0,
IND,
BUKRS(4),
GJAHR(4),
BLART(2),
BLDAT(10),
BUDAT(10),
BKTXT(25),
HKONT(10),
BSCHL(2),
DMBTR(17),
SGTXT(30),
ZUONR(17),
END OF IT_FILE.
DATA: C_NODATA(1) TYPE C VALUE '/'. " NODATA
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-T01.
PARAMETERS: P_LFILE TYPE CHAR70 OBLIGATORY,
DS_NAME TYPE CHAR70 OBLIGATORY LOWER CASE, "< Server file
GR_NAME(12) TYPE C DEFAULT 'FI_TEST'.
SELECTION-SCREEN: END OF BLOCK BLK1.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
OPEN DATASET DS_NAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RFBIBLI0) USING C_NODATA.
PERFORM SET_DATA.
CLOSE DATASET DS_NAME.
PERFORM SUBMIT_RFBIBL00.
*& Form upload_data
FORM UPLOAD_DATA .
DATA: L_FILE TYPE RLGRAP-FILENAME.
L_FILE = P_LFILE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ','
TABLES
DATA_TAB = IT_FILE
IF SY-SUBRC <> 0.
MESSAGE S398(00) WITH 'Error while uploading'.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " upload_data
*& Form set_data
FORM SET_DATA .
PERFORM SET_BGR00.
LOOP AT IT_FILE.
CASE IT_FILE-IND.
WHEN 'H'.
PERFORM SET_BBKPF.
WHEN 'D'.
PERFORM SET_BBSEG.
ENDCASE.
ENDLOOP.
ENDFORM. " set_data
*& Form set_BGR00
FORM SET_BGR00 .
PERFORM INIT_BGR00(RFBIBLI0) USING BGR00.
BGR00-MANDT = SY-MANDT.
BGR00-GROUP = GR_NAME.
BGR00-USNAM = SY-UNAME.
BGR00-NODATA = C_NODATA.
TRANSFER BGR00 TO DS_NAME.
ENDFORM. " set_BGR00
*& Form set_bbkpf
FORM SET_BBKPF .
PERFORM INIT_BBKPF(RFBIBLI0) USING BBKPF.
BBKPF-TCODE = 'FB01'.
BBKPF-BLART = IT_FILE-BLART.
BBKPF-BUKRS = IT_FILE-BUKRS.
BBKPF-BLDAT+0(6) = IT_FILE-BLDAT+0(6).
BBKPF-BLDAT+6(2) = IT_FILE-BLDAT+8(2).
BBKPF-BUDAT+0(6) = IT_FILE-BUDAT+0(6).
BBKPF-BUDAT+6(2) = IT_FILE-BUDAT+8(2).
TRANSFER BBKPF TO DS_NAME.
ENDFORM. " set_bbkpf
*& Form set_bbseg
FORM SET_BBSEG .
PERFORM INIT_BBSEG(RFBIBLI0) USING BBSEG.
BBSEG-NEWKO = IT_FILE-HKONT.
BBSEG-NEWBS = IT_FILE-BSCHL.
BBSEG-WRBTR = IT_FILE-DMBTR.
BBSEG-SGTXT = IT_FILE-SGTXT.
TRANSFER BBSEG TO DS_NAME.
ENDFORM. " set_bbseg
*& Form submit_rfbibl00
FORM SUBMIT_RFBIBL00 .
SUBMIT RFBIBL00 WITH DS_NAME = DS_NAME
WITH CALLMODE = 'B'
WITH XLOG = 'X'
AND RETURN.
ENDFORM. " submit_rfbibl00
If you have any problem getting file, send me an e-mail (my id is on my business card) I will send you the file as a attachment
Regards,
Naimesh Patel -
How to edit the format of the existing template???
hi, i have created a report using report builder, i used the same template format in the report builder, if i have to change the format for eg. Logo, font from where i can do this????
Hi,
other graphics is not getting to the browser reportSee Builder Help on "About HTML output". It says:
The only drawn object supported in HTML is a solid, black, horizontal line. The line width specified in the report may be honored depending upon the browser. All other drawn objects (e.g., rectangles or circles) in the report layout will not show up in the HTML output. Space for these drawn objects is reserved, but there is no visible representation in the HTML output.
Instead, you can use DESFORMAT=pdf or DESFORMAT=rtf to get the graphics objects in the output.
About Margins:
1. Open your template in reports builder
2. Go to Paper Layout
3. Click "Edit Margin" in the toolbar menu. The margin is the area where you can define your header and footer.
4. Choose Insert > Date and time
Steps 1-3 are given in Report Builder Help on the topic "Modifying objects in the template margin". I would urge you to use the Help topics more extensively, since they provide a lot of useful information.
Navneet. -
Authorization Check Infotype Header
Hi all,
i posted the following threat in HCM Forum, but i think it is also a question for ABAP Forum
Authorization Check Infotype Header
Thanks & regards1. authorisations in hr cannot be controlled at infotype-header level and/or infotype field level.
2. If only a few fields of a specific infotype are to be allowed for a user the most efective way of doing it is by way of creating a view for the infotype with only the allowed fields in it.
3. another way of doing it is by way of a custom authorisation object (potentially) but then again your requirement is not going into explicit details,. so this option is a possibility you may want to do some due diligence on.
cheers -
Hi,
I have created a custom PA infotype and as per the requirement the database table for this infotype would have dates defaulted to 01.01.1800 and 31.12.9999 since the actual data would be stored in OM tables.
Now, the infotype header is retrieving data as of the BEGDA and hence in the header of the infotype the latest values are not getting displayed. I want the header to display the values valid as of system date.
Please let me know where to configure that.
Thanks,
HariniGot the solution.
-
How do I change the format of the date to dd-mm-yyyy?
At the moment, the entries will not be accepted unless they are in the format of mm-dd-yyyy which will not go down well on what I am trying to do?
Any advice on how to change the format?
ThanksHi Keri,
I can understand your concern & will help you to get this issue resolved.
Window where you Insert date in Add Header & Footer, you will get the option of 'Page Number and Date Format'. Please click on it.
Page Number and Date Format window will pop up on your screen, now you can select the date format from the drop-down list & click on OK to confirm the changes. Please refer to the screenshot below.
Let me know if you still experience any issue.
Regards,
Aadesh -
Photo upload in infotype 2, or infotype header
Can anyone tell me in detail how to upload photo of employee in infotype header and what all needs to be done in terms of basis also , archieve link or something. I know oAAD but how does that linkage happen.
Solution in https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false is very good.
Mass upload program ZHR_BDC_UPLOADPIC requires input every file path for photos in dialog window.
I have improved this process:
1. Made a copy of program OANEWCON (program in transaction OAOH) ZOANEWCON (hung on new transaction ZOAOH)
inserted two lines allow to pass a path as a parameter to this program:
PROGRAM ZOANEWCO MESSAGE-ID OA.
TABLES: TOAV0, TOAOM, TWFDB, TOAPA.
DATA: KEY LIKE OJINT-KEY.
DATA: OBJECT LIKE OJINT-NAME.
DATA: OBJECT_ID LIKE TOAV0-OBJECT_ID.
DATA: ARCHIV_ID LIKE TOAV0-ARCHIV_ID.
DATA: ARC_DOC_ID LIKE TOAV0-ARC_DOC_ID.
DATA: ABLAGEDATUM LIKE SAPB-SAPABLDATE.
DATA: AR_DATE LIKE TOAV0-AR_DATE.
DATA: DEL_DATE LIKE TOAV0-DEL_DATE.
DATA: SAP_OBJECT LIKE TOAOM-SAP_OBJECT.
DATA: AR_OBJECT LIKE TOAOM-AR_OBJECT.
DATA: EXPIRY_TIM LIKE TOAOM-EXPIRY_TIM.
DATA: METHOD LIKE OJINT-METHOD.
DATA: RETURN LIKE OJINT-RETURN.
DATA: PARAMETER LIKE OJINT-PARAMETER.
DATA: BEGIN OF I_TOAV0 OCCURS 1.
INCLUDE STRUCTURE TOAV0.
DATA: END OF I_TOAV0.
DATA: BEGIN OF I_TOAOM OCCURS 1.
INCLUDE STRUCTURE TOAOM.
DATA: END OF I_TOAOM.
DATA: BEGIN OF FIELDS OCCURS 1.
INCLUDE STRUCTURE OJFIELDS.
DATA: END OF FIELDS.
DATA: OK_CODE(4) TYPE C,
OK_CODE_SAVE(4) TYPE C.
DATA: CREATE(2) VALUE '01'.
DATA: infile(70).
MODULE INIT0100 OUTPUT *
MODULE INIT0100 OUTPUT.
SET TITLEBAR '000'.
CLEAR: OBJECT, AR_OBJECT.
SET PF-STATUS 'POPU100'.
ENDMODULE.
MODULE EXIT_BEARBEITEN INPUT *
MODULE EXIT_BEARBEITEN INPUT.
OK_CODE_SAVE = OK_CODE.
CLEAR OK_CODE.
CASE OK_CODE_SAVE.
WHEN 'ESC'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN 'CANC'.
SET SCREEN 0.
LEAVE SCREEN.
ENDCASE.
ENDMODULE.
MODULE READ0100 INPUT *
MODULE READ0100 INPUT.
OK_CODE_SAVE = OK_CODE.
CLEAR OK_CODE.
CLEAR KEY.
CASE OK_CODE_SAVE.
WHEN 'NEW'.
OBJECT = TOAOM-SAP_OBJECT.
AR_OBJECT = TOAOM-AR_OBJECT.
SELECT * FROM TOAOM WHERE AR_OBJECT = AR_OBJECT
AND SAP_OBJECT = OBJECT.
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE W251 WITH AR_OBJECT OBJECT.
"MESSAGE: NO NCI-DOCTYPE with this Objecttyp
ELSE.
Corr. 3.0. Begin
Authority check with Archive id
ARCHIV_ID = TOAOM-ARCHIV_ID.
PERFORM AUTHORITY_CHECK_CREATE(OAALL)
USING ARCHIV_ID OBJECT SPACE AR_OBJECT SPACE
CHANGING SY-SUBRC.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE 'E' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Corr. 3.0 End.
Change 5.0 for BOR Objecttypes with GUID vok
METHOD = 'EDIT'.
Eingabe der Object_Id
CALL FUNCTION 'OJ_KEY_FIELDS'
EXPORTING
KEY = KEY
METHOD = METHOD
OBJECT = OBJECT
TITLE_DIALOG = TEXT-001
IMPORTING
KEY = KEY
TABLES
FIELDS = FIELDS
EXCEPTIONS
EXC_OBJECT_NOT_FOUND = 01.
CALL FUNCTION 'ARCHIV_POPUP_OBJECT_KEY'
EXPORTING
DISPLAY = ' '
OBJTYPE = OBJECT
TITLE = TEXT-001
OBJKEY = ' '
LASTTYPE = ' '
LASTKEY = ' '
CHECKEXISTENCE = 'X'
GENERIC = ' '
EDIT = ' '
IMPORTING
CHANGED =
RETURN =
OBJKEY = KEY
USE_LAST =
EXCEPTIONS
ERROR_PARAMETER = 1
USER_CANCEL = 2
OTHERS = 3
End of change 5.0 for BOR Objecttypes with GUID vok
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'W' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CLEAR TOAV0.
ELSE.
TOAV0-OBJECT_ID = KEY.
IF KEY EQ SPACE.
MESSAGE W252.
CLEAR TOAV0.
'Kein SAP-Beleg vorhanden.'.
ELSE." create archiveobject versus dialog
PERFORM CREATE_ARCHIVE_OBJECT.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
ENDMODULE.
FORM CREATE_ARCHIVE_OBJECT *
FORM CREATE_ARCHIVE_OBJECT. "Create an archiveobject
CALL FUNCTION 'ARCHIV_CREATE_DIALOG_META'
EXPORTING
AR_OBJECT = TOAOM-AR_OBJECT
OBJECT_ID = TOAV0-OBJECT_ID
SAP_OBJECT = TOAOM-SAP_OBJECT
FILE = infile
IMPORTING
ARCHIV = TOAV0-ARCHIV_ID
ARCHIV_DOC_ID = TOAV0-ARC_DOC_ID
DOCUMENTCLASS = TOAOM-DOC_TYPE
EXCEPTIONS
ERROR_ARCHIV = 01
ERROR_COMMUNICATIONTABLE = 02
ERROR_CONNECTIONTABLE = 03
ERROR_KERNEL = 04
ERROR_PARAMETER = 05
ERROR_SCANQUEUE = 06
others = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'W' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CLEAR TOAV0.
ELSE.
MOVE TOAOM-DOC_TYPE TO TOAV0-RESERVE.
TOAV0-SAP_OBJECT = TOAOM-SAP_OBJECT.
TOAV0-AR_OBJECT = TOAOM-AR_OBJECT.
COMMIT WORK.
MESSAGE I044.
ENDIF.
ENDFORM.
2. in program ZHR_BDC_UPLOADPIC calling transaction ZOAOH
added parameters for data file, for a photo ID in archive, and add date of a photo into the data file
e.g.: 0000000527.09.2004C:\Photos\5.jpg
{REPORT ZHR_BDC_UPLOADPIC NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF IT_DATA OCCURS 0,
PERNR(8), " LIKE RP50G-PERNR,
DATUM(10), "date of the photo
FILENAME(128),
END OF IT_DATA.
DATA: T1(80),
file_path(132).
SELECTION-SCREEN: BEGIN OF BLOCK sp WITH FRAME TITLE text-f01
NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(4) A1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK sp.
INCLUDE BDCRECX1.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN: BEGIN OF BLOCK vst WITH FRAME TITLE text-f02.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(25) TEXT-S11 FOR FIELD IDOBJ.
selection-screen position 45.
PARAMETERS POPFILE(128) VISIBLE LENGTH 50
DEFAULT 'C:\PICTURE.TXT'. "input data file
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(25) TEXT-S12 FOR FIELD IDOBJ.
selection-screen position 45.
PARAMETERS IDOBJ(2) DEFAULT '01'. "id object
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK vst.
at selection-screen on value-request for POPFILE.
call function 'F4_FILENAME'
exporting
field_name = file_path
importing
file_name = POPFILE.
exception
others = 1.
START-OF-SELECTION.
PERFORM OPEN_GROUP.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = POPFILE
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF SY-SUBRC NE 0.
WRITE : / 'No to able read input file'.
STOP.
ELSE.
WRITE : / 'Data processing ...'.
T1 = 'Data processing ...'.
MESSAGE T1 Type 'S'.
ENDIF.
LOOP AT IT_DATA.
PERFORM BDC_DYNPRO USING 'ZOANEWCON' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'TOAOM-AR_OBJECT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=NEW'.
PERFORM BDC_FIELD USING 'TOAOM-SAP_OBJECT' 'PREL'.
PERFORM BDC_FIELD USING 'TOAOM-AR_OBJECT' 'HRICOLFOTO'.
PERFORM BDC_FIELD USING 'INFILE' IT_DATA-FILENAME."JPG
PERFORM BDC_DYNPRO USING 'SAPLOA12' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'OBJID-VALUE(03)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=OK'.
PERFORM BDC_FIELD USING 'OBJID-VALUE(01)' IT_DATA-PERNR.
PERFORM BDC_FIELD USING 'OBJID-VALUE(02)' '0002'.
PERFORM BDC_FIELD USING 'OBJID-VALUE(04)' IDOBJ.
PERFORM BDC_FIELD USING 'OBJID-VALUE(05)' IT_DATA-DATUM.
PERFORM BDC_TRANSACTION USING 'ZOAOH'.
clear IT_DATA-FILENAME.
ENDLOOP.
PERFORM CLOSE_GROUP.} -
hi all
what is infotype header definition???
what is the use of table T588J
regardsHello,
in each infotype you can select which fields are to be diplayed, PERNR-PERSG etc.
In customizing under Customizing user interfaces-change screen header you first select Header modifier where you create or select one of the exististing if it is ok with you and you assign it to master data or applicant data.
In infotype header definition(which is the table you asked for) you define in your header modifier the fields, the infotype to which are to be displayed, the column and the field type.
You will have to do several changes until the result is satisfying!
At the end you assign to the infotype the header modifier at Header structure per infotype
ps. don't forget to generate the table T588J when you are finished.
Regards
Nadia -
What is an Infotype header?
please tell me that also. iam preparing for job iam a fresher i don't have any experience in sap-hr.so ,please help me in that
<Moderator Comments: Pl do not use all caps>Hello,
The headers displayed on each infotype and on the initial PA20/PA30 screen is configurable. The relevant IMG path is:
Personnel Mgmt > Personnel Admin > Customizing User Interfaces > Define Screen Header
The infotype header is just the 3 lines in the header part (with personnel number, name, EE group. EE subgroup, etc)
Here are the 3 main tables : V_T588J Header Modifier Definition
V_T588I Header Modifier to Screen Header
V_582A_B Screen Header to Infotype
that you will find in the IMG path above.
Hope it helps,
Christine -
Infotype header - best practice
Hi group
Today our ifnotype headers are created in a way that makes us have to break a lot of infotypes just to refresh the header.
There are 2 reasons in my opinion:
- We have chosen to read header on infotype begda
- We have eg. position information in the header
We want to change this so we don't have to break eg. address just to read correct data.
I don't feel reading header at sy-datum is a right choice. This can give an incorrect picture if you read an infotype and the header is inconsistent with the actual situation in the date-range for the infotype.
So I am leaning towards letting the header contain much less information.
Does anyone have some "best practice" thoughts?
Any documentation I can read up on regarding best practice on this matter?
Thanks in advance
KirstenHi,
Headers, in general, are part of the whole philosophical debate. Iu2019ve seen both ways: current dated and infotype date driven. Iu2019m an advocate of them being infotype date driven for the very same reason that you mentioned: display what is on the record.
The other school of thought is to always display current information. It also gets some leverage depending on what is being displayed. If you have OM related data like position, job, org units etc, and clients may want to always display the current information. Maybe they are trained that way to only pay attention to headers to give them ad-hoc type information. They can get historical data through other reports.
I donu2019t think there is any u201Cbest practiceu201D with headers; itu2019s a purely philosophical choice.
Hope this helps.
Donnie -
Hi When we run F.81 in some cases we get the error:
00 065: Enter date in the format __.__.____
In the header from the document I don't see difference with the working one's
How we can solve this?Hi,
Did you have an upgrade sometime back.
During upgrade to 604, a field is activated, in the active screen variant. T-code OLMRLIST with following input:
Transaction "****"
Screen variant ******
Program "*******"
Screen "****"
Then deactivating the "with contents" checkbox on "reference date"-field.....and problem was solved
This what I've done when I encountered teh same problem sometime back.
Good Luck,
Raghu -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?
Maybe you are looking for
-
You are now chatting with Neema. Neema: Hello! Welcome to Adobe Design Specialist team. Neema: how may i help you today? Neema: may i know what version of pagemaker file you are trying to open? Hans Owe Dorfh: PageMaker 7! Neema: you can open pagemak
-
It does that in my Hotmail inbox, my bank account web sites,... It started to do that about a year of 2 ago. So I started to use Chrome instead. This morning I'm using Firefox because I saw they upgraded and I thought it would not do that again, but
-
Query on using Screen exits & Menu Exits
Hi Group, I was trying to make changes to Screen and also adding Menus to the standard transactions. I went through some sites like <b>SAP Help and SAP Development</b>. But, they were giving info on how to create the things and not giving any sample
-
Install Nagios agents on Solaris 10 to monitor from RHEL 5
Hi, Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me. Thanks Rao
-
I want to be able to add a Page dynamically to a Book. In the Portal JavaDocs, there is a method called addPage() which is part of the following class :- com.bea.netuix.servlets.controls.page.Book Problem is, this class doesn't seem to exist ? Anyone