Infoview Java Error: Webi doesn't diaplay report content

Hi, We are on BO XI 3. On some machines when we login into infoview and click on create new webi we get the below message:
Java has discovered application component that could indicate security concern. Name: Java_Report_Panel. Block potentially unsafe components from being run? The application contains both signed and unsigned code.
It gives you the option for yes or no. If you select yes then no content displays in the webi(the webi report area turns yellow, basically you don't see any data) if you select no then the webi works ok. Why is it? kindly help me understand why I get this message on certain machines and how can I avoid this message. Thx
Looks like it hides the data if you select yes.
Puneet

Hi Puneet,
Look at this SAP Note"
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393638383226]
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131383937303226]
Regards,
Bashir Awan

Similar Messages

Error when Opening a Crystal Report in a Web Application

Hi All,
How are things?
We are trying to open a Crystal report in a Web Application based on a Web service on Appache Tomcat.
The report is in the Test Environment poiting to a SQL 2005 Database.
The report opens and runs fine in Crystal Reports and in Infoview.
The Web application throws back a long error as shown below.
Looks to be like a SDK Issue ( Not pretty sure )...
Could anyone help me out on this?
STACK TRACE: at BusinessObjects.DSWS.ReportEngine.ReportEngine.GetDocumentInformation(String documentReference, RetrieveMustFillInfo retrieveMustFillInfo, Action[] actions, Navigate navigate, RetrieveData retrieveData) at Service.GetReportWithParms(String rptName, String folderName, String parms, String user, String password, String output, String& strError) MESSAGE: Failed to retrieve binary view of the report. (Error: WRE 02527) CALL STACK TRACE: com.businessobjects.dsws.wsc.common.axis.WSExceptionFactory$ExportReportFailed at com.businessobjects.dsws.wsc.reportengine.Report.getBinaryDocument(Unknown Source) at com.businessobjects.dsws.wsc.reportengine.DocumentAgent.handleGetBinaryView(Unknown Source) at com.businessobjects.dsws.wsc.reportengine.DocumentAgent.handleRetrieveData(Unknown Source) at com.businessobjects.dsws.wsc.reportengine.DocumentAgent.handleActions(Unknown Source) at com.businessobjects.dsws.wsc.reportengine.CrystalReportEngineSoapImpl.getDocumentInformation(Unknown Source) at com.businessobjects.dsws.reportengine.ReportEngineSoapImpl.getDocumentInformation(Unknown Source) at com.businessobjects.dsws.reportengine.ReportEngineSoapSkeleton.getDocumentInformation(Unknown Source) at sun.reflect.GeneratedMethodAccessor155.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:402) at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:309) at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:333) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:481) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:323) at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:854) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:339) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at com.businessobjects.dsws.wsc.common.axis.FlashFilter.doFilter(Unknown Source) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:186) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Thread.java:534) Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File XYZ.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 408 ]---- Error code:-2147215357 Error code name:internal at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.export(Unknown Source) ... 49 more
Thanks,
Raj

Moving post to .NET SAP Crystal Reports forum
Hello Scott
What browser are you using and what is the version of the browser?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Java Error while executing the excel template in the BIP 10g report server

Hello Gurus,
While we are executing the excel template we are getting the following java error and the report cannot be rendered to user who triggers the report. Where as the same excel template is generating output when user run it against the same data locally.
"oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:652] Document file to deliver not found : C:\Oracle\bipublisher\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xmlp3307tmp
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1172)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:495)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)"
We have tried with designing the .rtf template for this report and we are able to generate the report form the server. Please let us know the cause for this error in the server and way to rectify the exception from the report server.
Thanks,
Kamath.

"oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:652] Document file to deliver not found : C:\Oracle\bipublisher\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xmlp3307tmp
imho it's about empty result file
Data are there
may be yes but is some data from all for report itself ?
in other words data can be in output ( in xml ) but report can filters data and so report doesn't have appropriate data to representation ( it's assumption for error )
Data are there, when we are using rtf template, it is generating the output.
if you sure about data for report and on this data report works fine by bip desktop, so no ideas, only SR
btw you can first check my assumption and try to catch "no data found" in template
also you can check data itself, is it well-formed xml

Java Error when opening WEBI from BI Launchpad?

Hi I am working with colleagues on building a WEBI dashboard on the BI Launchpad. However, my colleagues are unable to access WEBI fully (view/edit reports) because the following error displays on their Internet Explorer web browser:
"Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine"
I have tried asking them to download the latest version of Java and still this error is not resolved. Does anyone know the root cause of this and how I can provide a solution for my colleagues?

Hi Kevin
This is the direct link
Java Archive Downloads - Java SE 6
download the first two
Java SE Development Kit 6u45
Java SE Runtime Environment 6u45
create username and password with oracle to download it
before installing the above two... uninstall all other java versions in the machine,
restart the machine once done
add the java path into environmental variables
check the version in the command prompt after the install using the command java -version

Error in "Web Preview" mode in Reports version 7.2.1

I get the following error in "Web Preview" mode in Reports. I am trying to select a member from dimension called "Entity" which has User POV property.
I also have other dimensions in the report with User POV but they all are working fine. I get the error only when trying to look up the above "Entity" dimension.
Any ideas?

Sorry forgot to put the error message in the above post....
Error 500--Internal Server Error
com.hyperion.ap.APException: [1106] Error: Class component property name invalid[OrgByPeriod]
     at com.hyperion.ap.adm.HssEnvironment.createException(HssEnvironment.java:240)
     at com.hyperion.ap.adm.HssLeafObject.getPropertyInstance(HssLeafObject.java:560)
     at com.hyperion.ap.adm.HssLeafObject.getPropertyValue(HssLeafObject.java:335)
     at com.hyperion.ap.adm.HssLeafObject.getPropertyValue(HssLeafObject.java:314)
     at com.hyperion.reporting.waa.HRWaaSdOrgByPeriodBean.initOrgByPeriod(Unknown Source)
     at com.hyperion.reporting.waa.HRWaaSdObjectTabBean.setOrgByPeriodBeanSettings(Unknown Source)
     at com.hyperion.reporting.waa.HRWaaPovBean.doForm(Unknown Source)
     at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
     at com.hyperion.waa.web.core.WAABean.doForm(WAABean.java:1267)
     at com.hyperion.waa.web.core.WAAFormBean.doForm(WAAFormBean.java:101)
     at com.hyperion.reporting.waa.HRWaaBaseFormBean.doForm(Unknown Source)
     at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
     at com.hyperion.waa.web.core.WAAPageBean.doForm(WAAPageBean.java:632)
     at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
     at com.hyperion.waa.web.core.WAAPageBean.service(WAAPageBean.java:583)
     at com.hyperion.waa.web.core.WAAPageBean.doForm(WAAPageBean.java:251)
     at com.hyperion.waa.web.core.WAAUseBeanDesignTag.startTag(WAAUseBeanDesignTag.java:347)
     at com.hyperion.waa.web.core.WAATag.doStartTag(WAATag.java:340)
     at jsp_servlet._jsp._waa._web._hr.__hrwaabase._jspService(__hrwaabase.java:1418)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.hyperion.reporting.webviewer.CompressionFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6356)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

Web Service data source report causes Java memory leak

Crystal Report designer fails to preview a report whose data source is a WSDL web service. This happens when the Java run time process has exceeded the memory limit specified in the CRConfig.xml file. The Java memory is never released by Crystal Reports until the Crystal Reports Designer is closed. Version is Crystal reports 2008 (product version 12.2.4.507).
This error also occurs in the Crystal Reports Viewer when used in a Microsoft .NET application (framework 3.5) referencing CrystalDecisions.CrystalReports.Engine.dll v12.0.2000.0, CrystalDecisions.Enterprise.Framework.dll v12.0.1100.0, CrystalDecisions.Enterprise.InfoStore.dll v12.0.1100.0, CrystalDecisions.ReportSource.dll v12.0.2000.0, CrystalDecisions.Shared.dll v12.0.2000.0
I load the ReportDocument object based on the location of the .rpt file and then set the ReportSource object of the CrystalReportViewer control:
string FullReportName = "TestFile.rpt";
ReportDocument reportDoc = new ReportDocument();
reportDoc.Load(FullReportName, OpenReportMethod.OpenReportByTempCopy);
this.crystalReportViewer1.ReportSource = reportDoc;
reportDoc.Close();
reportDoc.Dispose();
GC.Collect();
The code displays the report in the report viewer. However, every time the report is refreshed the Java runtime memory increases until the application cannot display the results. The error messages are "Failed to retrieve data from the database." followed by "Cannot determine the queries necessary to get data for this report. Details: Unexpected error". If you try to refresh the data once again the following errors occur: "Failed to retrieve data from the database." then "Cannot determine the queries necessary to get data for this report. Details: Schema file is invalid   Java heap space".
Increasing the java heap space in the CRConfig.xml file merely prolongues the onset of this error.
Is there a service pack or hot fix for this???
PLEASE HELP.

Many thanks for your help. This solved the issue for our .NET code, however the leak is still present in the report designer. I was also wondering if you could help further: because of the limits on the java memory process is there a way to ensure that a separate java process is started for each report that is loaded in my report viewers collection? Essentially the desktop application that i have created uses a tab control to display each type report, so each tab goes through the following code when displaying a report and closing a tab:
Is there a way to ensure that a different Java process is kicked off each time that I display a different report? My current code in c# always uses the same Java process so the memory ramps up. The code to load the report and then dispose of the report through closing the tab (and now the Java process) looks like this:
    private void LoadCrystalReport(string FullReportName)
      ReportDocument reportDoc = new ReportDocument();
      reportDoc.Load(FullReportName, OpenReportMethod.OpenReportByTempCopy);
      this.crystalReportViewer1.ReportSource = reportDoc;
    private void DisposeCrystalReportObject()
      if (crystalReportViewer1.ReportSource != null)
        ReportDocument report = (ReportDocument)crystalReportViewer1.ReportSource;
        foreach (Table table in report.Database.Tables)
          table.Dispose();
        report.Database.Dispose();
        report.Close();
        report.Dispose();
        GC.Collect();
Thanks

Error when re-scheduling a report in WebI XI 3.1 SP2

Hi,
Im running BOE XI3.1 SP2 and I get that error when re-scheduling a report in WebI. We have just recently patched the system to SP2.
Any idea what this error relates to?
Thanks
Frank

Sorry first part of this thread was removed.
The problem description is as follow:
On BOE XI 3.1 SP2, when re-scheduling a BO report which sends an Excel attachment to an email destination, users receive the error "An error has occurred: $Proxy4".
It seems to be hit and miss but is more consistent when sending to multiple (comma-separated) recipients in the 'TO' field. I also noticed that if you select CACHING then a "$Proxy5" type error is returned.
I understand that this bug was supposed to be fixed in XI3.1 SP2 but I'm already running SP2.
Anyone seen this?
Thanks
Frank
Edited by: Frank Goneau on Oct 20, 2009 4:16 PM

Consuming a Web service from Crystal reports 2008 - Error

Hi,
I want to consume a web service from Crystal Reports 2008. I created a New Connection using "XML and Web Services" and given WSDL url as the Web Service location. Crystal Report is able to connect to the WSDL and is displaying the tags correctly. When dragging the output to "Selected Tables' section, I am getting the following error:
"Invalid Argument Provided"
Details: Cannot support ArrayType input parameters.
Kindly help. Apparently this was a limitation in CR XI but does it still exist in CR 2008? Is there any patch available to resolve this issue?
Thanks,
Jaya
Edited by: jayakvr on Feb 17, 2011 10:47 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM

This issue is resolved now. I have installed the Service packs 1, 2 and 3 of CR2008 to overcome this error.
Thanks,
Jaya

SharePoint - Web Part - SQL Server Reporting Services Report Viewer Error.

Hi,
I was just having a bit of a fiddle with the differen't web-parts available to add on our local SharePoint site, and as one of my tasks is to have a report automatically open when the page is opened i thought i would try to add the web-part 'SQL Server Reporting
Services Report Viewer' just to see the outcome.
Now, I don't much care about viewing the report at this time, but imediately after trying to add the web part i am being displayed with an error and no matter how much i navigate away from the page or close the browser the particular link to the page i was
trying to insert the web-part into now displays an error.
The error simply says 'An unexpsected error has occured' with various 'Correlation ID:' each time.
Now i have a link to other parts or subsites of that SharePoint site and they work just fine, it's just when i try to click on the page where i wanted to put the web-part in it
still comes up with an error. This page just so happens to be the home page so it really does need to be fixed.
Please help!?
Many Thanks,
Plain_Clueless

Hi again,
Sorry for the bother, We have now fixed the issue for the time being.. all that was needed was a simple '?contents=1' at the end of the url which takes you to a menu where you can delete the
necessary web-part that was causing the trouble.
As for actually implementing the report onto SharePoint.. in future i will make Dev pages instead.. and it seems i may need to contact the admin side of building so they configure 'SQL Reporting
Services Report Viewer' properly.
Thanks a lot though!
- A little less Plain_Clueless
Plain_Clueless

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Getting error: java.lang.NullPointerException while submitting xml report

hi every one,
i am getting the below error when submitting the Xml report Request
XDO Data Engine Version No: 5.6.3
Resp: 21635
Org ID : 204
Request ID: 5878206
All Parameters: P_ORGANIZATION_ID=7907:P_DELIVERY_DATE_LOW=:P_DELIVERY_DATE_HIGH=:P_FREIGHT_CODE=:P_DELIVERY_ID=:P_TRIP_ID=:P_DELIVERY_LEG_ID=4497:P_ITEM_DISPLAY=D:P_ITEM_FLEX_CODE=MSTK:DebugFlag=N
Data Template Code: CUST_WSH
Data Template Application Short Name: WSH
Debug Flag: N
{P_DELIVERY_DATE_HIGH=, P_ORGANIZATION_ID=7907, P_TRIP_ID=, P_FREIGHT_CODE=, P_DELIVERY_DATE_LOW=, P_ITEM_FLEX_CODE=MSTK, P_ITEM_DISPLAY=D, P_DELIVERY_LEG_ID=4497, P_DELIVERY_ID=}
Calling XDO Data Engine...
java.lang.NullPointerException
 at oracle.apps.xdo.oa.util.DataTemplate.getDataTemplate(DataTemplate.java:379)
 at oracle.apps.xdo.oa.util.DataTemplate.<init>(DataTemplate.java:226)
 at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:283)
 at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
please help me out
Regards,
pavan

Above problem is solved.
but now i am facing one more problem
i intend to get output in pdf format
but i am getting in xml format
kindly help

Java error in session initializations - IC web client

Hi All,
When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
" Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
Pl suggest
Thanks
PRadeep

Hi Sai,
Kindly make sure that you have JREE1.4.0 and not above for your error.
Secondly, you are getting the first message because when you are closing your application by clicking onto the close at top, it doesnt log out your agent from the Webclient. The correct approach would be to close using the path Menu Bar> File> Close
The channels are not available because you have not maintained the queues and channels for your system. The same is do be done in SAP Easy Acess> Webclient> Additional Settings. It is also available in the Best Practices C78.
The link for the same is
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Hope this would help.
Regards,
Rekha Dadwal
You gain a point for every point that you reward. So reward helpful answers generously

Java error in session initialization Error - When calling IC Web client

Hi All,
When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
" Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
Pl suggest
Thanks
PRadeep

hi Indhra,
did you check, whether the services are active:
/Nsicf
/default_host/sap/bc/bsp/sap/
sam_sess_queue and sam_notifying
and the polling profile is defined with polling frequence:
/Nspro
->Interaction Center WebClient
->Basic Functions
->Define Context Area Profile
there "Define Polling Profile"
best wishes,
Hakan

2 Java ME Web Service Errors of "Not Compliant with JSR-172"

This happened when I use Microsoft's ASMX-based WSDL file on a Java ME WS client.
Say I had a test.asmx WSDL. Then I use NetBeans, and I go to New > Java ME Web Service Client
I tried to import from running web service, URL "http://www.testhost.com/wspackage/test.asmx?WSDL"
and then the popup validation error told me "Reference in element is not supported by this version of stub compiler"
also the X logo error told me "testasmx.wsdl is not compliant with Java ME Web Services specification (JSR-172)"
I wondered what's going on? Is there any data types not supported by JSR-172? Which is it?
When I "Validate XML" this ASMX file, it pops this:
"Error: src-resolve: Cannot resolve the name 's:schema' to a(n) 'element declaration' component."
The "types" section of my WSDL are like this:
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://tempuri.org/MMWebServices/Coverage"
xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
targetNamespace="http://tempuri.org/MMWebServices/Coverage" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/MMWebServices/Coverage">
<s:import namespace="http://www.w3.org/2001/XMLSchema" />
<s:element name="ViewListDoctor">
<s:complexType>
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="iUserId" type="s:int" />
<s:element minOccurs="1" maxOccurs="1" name="iASchId" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="sSearchKeyword" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dsView">
<s:complexType>
<s:sequence>
<s:element ref="s:schema" /> // <<error occured on this line, and every time the ref="s:schema" shows up <<
Anyone have experienced this?

Yes, thx u. I didn't realized I was posting on the wrong section (Enterprise) so I posted again to the J2ME/MIDP section since it was all about mobility. Please delete the first post.

JAVA error when exporting to reporting schema ODDM 4.1

When attempting to export a design to a reporting schema, we received the following error:
ERROR ReportsHandler - error exporting to reporting schema:
java.lang.classcastException: oracle.dbtools.crest.model.design.relational.column cannot be cast to oracle.dbtools.crest.model..design..relational.columnView
at oracle.dbtools.crest.exports.reports.RSViewColumn.export (RSViewColumns.java:43
at oracle.dbtools.crest.exports.reports.RSRelationalModel.export (RSRelationalModel.java:62)
at oracle.dbtools.crest.exports.reports.ReportsHandler.export (ReportsHandler.java:135)
at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run (ControllerApplication.java:2079)
We downloaded and installed ODDM 4.1 (EA-1) build 4.1.0.866 to resolve an issue with column widths when exporting to the reporting schema (per SR 3-10154440761). This is the 64 bit version with the included JAVA 1.8 JRE.

David,
We migrated this model from data modeler 3.3. That Model was created from an import from Oracle Designer. We have not yet tried to import the data model from Oracle Designer directly into v4.1 but are planning to do so shortly. When we tried to export that design (from v3.3) to the reporting schema, it failed with object too large for column errors. We wrote SR 3-10154440761 and were advised by Michael Wickham to use v4.1 EA as the column size issue had been resolved in this version. It was apparent that the export to the reporting schema was making more progress before it failed on the JAVA error.
We are trying to migrate from Oracle designer to Oracle Data Modeler

Infoview Java Error: Webi doesn't diaplay report content

Similar Messages

Maybe you are looking for