INIT Process Chain

Hi All,
What is the best option to use INIT loads in process chains.
Is it a good practice to create a process chain for INIT loads and have separate process chains for delta loads.
Kind Regards
James

Hi ,
you would not be needed to run all Init info packages everyday . You would run Init only when any delta breaks up in any specific data target. In this case having a process chain which contains init for all data targets would not be useful . Manually doing init is best option here.
In case of any implementation going on where all data targets have to be initialized before loading the delta having a seperate process chain only for Init would be of great help.
Please let know what is your scenario here.
Regards
Venky

Similar Messages

Scheduling Technical Content Process Chains

Hello experts,
I'm trying to schedule the Technical Content Process Chain as per SAP Note 934848 - step 4.
This step says:
4. Schedule Process Chains.
Please schedule the technical content process chains (0TCT*) in transaction RSPC. "INIT" process chains need to be scheduled once and "DELTA" process chains should be scheduled periodically.
But when I open RSPC I can't find anything with (0TCT*).
Can anyone help me?
Best Regards,
Rui Romba

Hi Vikram,
We have everything installed.
Recently we had an auditory from SAP AG and they detected that we needded only to schedule the Technical Content Process Chain.
Regards,
Rui

How to delete Init flag in a process chain, before processing the init

Hi,
At the end of the week i need to re-execute the init request from ODS1 to ODS2.
Therefore, i have to delete the init flag first and the requests in the CUBE1, everything automatically in the process chain.
The schedule must be as follow :
1. Delete init flag on ODS1
2. Delete all request from ODS1 in the CUBE1
3. Load an regular INIT request from ODS1 to CUBE1.
Notes :
I cannont clear all the CUBE1 content, as i have other datasource than ODS1.
CUBE1 is the only one data-target of ODS1.
Any suggestion, as there is no process in the process chain to "Delete Init Flag".
Best regards,
Ludovic

Hi
Ad.1
start code----
DATA: v_count TYPE i,
p_dsourc LIKE roosprmsc-oltpsource,
p_rlogsy LIKE roosprmsc-rlogsys.
p_dsourc = 'your source'. *"8E2_ODS1"
p_rlogsy = 'your system'. *"BP100"
SELECT COUNT(*) FROM rssdlinit INTO v_count
WHERE oltpsource = p_dsourc
AND logsys = p_rlogsy.
IF sy-subrc NE 0. "MesgTyp E end the program abnormally
MESSAGE e508(db6) WITH 'x' 'x' 'in DSource and/or LogSys'.
EXIT.
ENDIF.
Call delete function
CALL FUNCTION 'RSS1_QUEUE_DELETED_IN_OLTP'
EXPORTING
i_oltpsource = p_dsourc "OLTP-Source
i_logsys = p_rlogsy "LogSys (Myself or Remote)
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e508(db6) WITH 'x' 'x' '===> No sucess <==='.
ENDIF.
---end code
Ad.2
See RSA1-> Infosources -> select your Infopackage -> Change ->
Data targets -> Automatic Loading of Similar.. -> Delete existing Request
Ad. 3
Create Infopackage with init
Regards
PWnuk

How to add inits to Process Chain

Hello Experts,
I have a process chain with one ODS joining data of two other ODS.
When I ran the chain for the first time everything was fine. But when I ran it a second time the process cain stops updating activated data from the first two ODS into the third one!
I am not sure, maybe this is an init problem.
But I don't know where to check in pc if it uses full, init or delta update!
any suggestions?
thanx
Axel

simple double--click on the infopackage process type in the chain..it will open up the infopackage change screen..there u can change and save it..
but if u r in production..system will be closed and does not allow u to change infopackages in the chain..
for this u have to goto rsa1--transport connection..click object changeability button..and set 'everything changeable' for infopackage and for some process chain related ones..(dont remember them exactly..sorry)..
please..can u tell where chain is stuck..u said 3rd ods isnt getting data updated into the first 2 ODS's..right..is data updated and activated in first 2 ODS's when run 2nd time..?
please also send steps used in the chain..
cheers,
Vishvesh

Init and delta uploads using process chain

Hi,
I have a scenario where for the first upload i use init upload for that i have an infopackage now for the subsequent uploads i.e delta upload i get the option for the same only once i have run the init upload.
so the doubt is can i use a process chain defined to carry out the whole task?????
Regards

Hi Virat,
AS init is a one time activity, so what you can do is.
1> set the init in infopack and run the process chain.
2> remove the infopack and then include a new infopack with delta option or change the existing infopack to delta option.
3> schedule the infopack.
whatever you are expecting is not possible.
Hope I answered your question.
THanks and Regards,
Suneel

Process Chain Steps to upload into teh Cube for delta init

Hi All,
I have all the delta init info package in my Process chain for all the DSO themn i have DSO ACtivation step and third is Furhter Processing....
It ran Ok for all the DSO but it Did not update the data into the Infocubes... Also all my DSO setting is Update data into the data target,,, >> Set the status to ok automatically..
Plz let em know what i am missing ...
Thank you

Create a info package for the DSO to Cube by going to the 8 Datasource and load the data.
From the time you start delta you should not face any issues.
-Vikram

Delta loading and Process chain BI

Hi experts,
Two Issues.
1)As i am loading FI data into dso through a process chain which includes Start process>Delta infopackage(which gets data upto psa)>Delta dtp-->Datastore activation.
But infopackage is picking up deltas but DTP is picking up all the previous records plus deltas.
100 records -- 1st day throught Intialization of Delta with Data Transfer
2 delta records -- 2nd day
But DTP is picking up 102 Records on the 2nd Day, which means it is also picking the old records as well.
The DSO must have just 102 records but it is having 202 records.
2) A process chain in running daily as scheduled , but I rescheduled with new scheduling options without deactivating the Process chain.
My Question is
Will the Process chain run for the OLD and the New Schedule or
Is it going to run for new schedule or old one?
or
will I face any Problem because I did not deactivate and made changes to the Change.
Please help me in this matter.
Thanks in advance.
Bhadri.

First query:
I believe that u have used FUll update type DTP is instead of the Delta DTP.. Please cross check the Update mode of the DTP once.
To resolve this issue, delete the total content of the DSO as u have Init and delta loads in PSA. And then using the Delta DTP of the Process chain, load the data. It will extract the total cotent what ever is there in PSA, and later the same DTP will act as the Delta type and will pick the data from the New request of the PSA.
Second Query:
Its always suggested to deschedule the process chain before changing the schedule timings. When ever u do this type of scheduling, just check how many number of JObs available in Schedule mode, if u can see more than one, then delete the older one and keep the new one as it is.
But I always suggest you to deschedule the process chain and reschedule PC with the new timings and then activate the same.
Thanks
Assign points if this helps

Error in process chain for PCA full load

Hello everyone,
I'm trying to use a process chain in order to delete a previous full load of plan data in a cube prior to the new load (to avoid double records). The successor job in the process chain is loading a delta of actual data into the same cube (same info source).
When executing the process chain (and the included info package (full load)), the setting "Automatic loading of similar/identical requests from info cube" in the info package is not working (I have ticked "full or init, data-/infosource are the same")...
I have checked that the function itself works as I have executed the info package manually with success. So the problem is the chain somehow.
In the chain I just execute the info package as usual... so to my understanding, it should work the same way as if I executed it manually. Or am I wrong? Is some additional setting required in the chain in order to make it work?
Any ideas?
Thanks,
Fredrik

Hi Fredrik,
not all settings in infopackages work in chains in the same way they do while running the package manually. Mostly you can check that with pressing F1 on the setting. In your case, you need to add a process type for deleting the data to the chain. In your chain maintenance, look at process types and then in load processes .... There you will find the type you need.
kind regards
Siggi

Error while Executing Process chains

Hi All,
Initially i have created infopack with full load and Executed it manually, later i have changed same infopack to Delta load and kept in Process chains, when i execute the Process chains, the start Process have get triggred, but my Process stops at load data.when i have check the log file it is showing the Below Message:
"Message_Type_x" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
In Sm37 it is showing
BI_PROCESS_TRIGGER is Finished
BI_PROCESS_LOADING is Cancled
Please help meto find out what might be the cause of this Error.
Note: The infopackage will get data from Generic data Source.
when i run the Process chains, the request is not going to R/3 Side.
Thanks and regards,
santosh.

Hi Santosh,
Go through this below note.
Note 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS.
If Init is successfull then you can manually try the delta and check it.
Hope this helps
regards
KP
Asign points if helpfull

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

Process chains:error in ods

Hi, I am experimenting and learning how to create process chains on my own.
I took ODs as process type and ran it. The last processcame out as red. The error says,
<b>Delete init. request REQU_4N73RNLEHQ5F9CW523WV7OUN9 before running init. again with same selection</b>
Can you please tell me what the meaning of this is. Also, how do I find out where this request number is? is ther any table which shows all the request numbers and to which target it belongs?
Thanks,
Sam

Hi Radha
Can you please email me ASAP the documents for step by step process chain creation
Thank You in Advance.
My Mail id is [email protected]
Regards
Edited by: vanjani_b on Feb 13, 2008 11:34 AM

How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

Process Chain Master Data Failed.Showing Entire chain has status R

Hi,
Everyday SDMasterChain is running successfully.
Today one of the localChain or subchain has failed.
I have noticed that it has failed because last delta for one infoPackage has not yet completed and chain showing status "Entire chain now has status 'R'"
Can anybody resolve the issue?
Below is te log for the error.
Job started
Step 001 started (program RSPROCESS, variant &0000000113991, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 created request
Request REQU_449HFL0OFD22BSU2GX1X2MJJJ could not be generated with InfoPackage REQU_449HFL0OFD22BSU2GX1X2MJJJ without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 in Process Chain
Entire chain now has status 'R'
Process Attribute Change Run, variant Compounding Object has status Undefined (instance )
Process Save Hierarchy, variant Generated from LOADING ZPAK_3VBSFASA7NWCNP1JX9WXI5 has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_ATTR - Full has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TEXT has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TID_LKDH_HIER has status Undefined (instance )
Process Execute InfoPackage, variant ZMAT_SALET - TEXT has status Undefined (instance )
Process Start Process, variant Bekaert Master Data Loads - Start Variant has status Undefined (instance 449HEDPDI8N6AP5XKDUODJS6N)
Process Execute InfoPackage, variant Load from 0MAT_SALES_ATTR into ZMAT_SALE has status Undefined (instance REQU_449HB4K9K3W7GPJEF52YM83N3)
Process Execute InfoPackage, variant Load from 0MAT_SALES_TEXT into ZMAT_SALE has status Undefined (instance REQU_449HJOO6322QV09OL73P18ODR)
Process Execute InfoPackage, variant ZMAT_SALEM - ATTR - FULL has status Undefined (instance REQU_449HEJW4S44QAUTY9LQKH4QY7)
Process Execute InfoPackage, variant Delta load from 0MAT_PLANT_ATTR into 0MAT_PLANT has status Undefined (instance REQU_449HFL0OFD22BSU2GX1X2MJJJ)
Termination of chain has been reported to meta chain 449CKM1O64AHRLQJLNZ2GBWQ7
Message sent successfully
Job finished
Rgds,
CV.

Hi,
There are times when Master Data load compel us to do Re-Init. I guess you need a Re-Init.
Check theses links:
1: Re: Update mode R is not supported by the extraction API
2: pl help me with repeat delta for text info object
Regards
Happy Tony

Process Chain load step in yellow status

We are having a process chain with a load step.The load step is run with init with data transfer.
The load step is scheduled for the next time without changing the option to delta update.So the load step turned yellow with the background job log stating that delete the init Request ID.
The process chain is scheduled for several times but the load steps are all yellow.I initialized with data transfer and then to delta update.
All the requests in data targets are green.But all the load steps are in yellow.please let me know how to make it green.I tried to change the status of the load step to green manually using the function module rsps_process_finish,but the status is not changing.
Please help me out.Thanks in advance.

Hi,
From the Cube Manage > Environment > Automatic req processing > Chk Quality status to ok , chk this option if it is not done.
this should reslve the issue.
-Vikram

INIT Process Chain

Similar Messages

Maybe you are looking for