Initial Load Decentralized WM with HU active

Hi,
I want to know the procedure to make the initial data load in decentralized WM where both systems are SAP, and we have HU management active, and HU number assignation needs to be external.
Thx

Hi JP,
When you implement Decentralized Warehouse Management, IM data are managed in ERP system.
And WM/HU information is managed in the Decentral WM system. I believe you are getting that error message because you are trying to enable the HU requirement for the Storage location in ERP system. You should enable the HU requirement in DWM system instead.

Similar Messages

Creating Handling Unit for Inital Load with SU active

Hi,
What is the best way to create Handling units for WH with SU active during Initial load.

Hi,
To upload stock please refer below steps.
1.You can write a program or create LSMW to upload stock. In my experience I used program to upload stock in WM. To upload stock I used transaction LT01 in program.For this I have to give input file which will have material,plant, storage type ,bin ,storage unit type, qty etc.When you run this program system will create automatically TO &SU for the material with the given bin.This TO can be automatically confimed in system.
2.To perform your program your whole warehouse structure should be in place.
I believe you got the answer.
Regards,
Prashant

Initial load with CDC

I am now able to replicate changes made on the source table and make the changes visible on the staging site, now I have two questions:
1.) how do I manage the initial load of the source table.
The table as object gets replicated as an empty table, after the first change on the source table the changes are beeing replictated, but not the whole contents of the table.
2.) how do I manage to apply the changes to target table ?
I have the changes in the change view but with a.) all the additional columns, ending with a $-sign and b.) only the changed values, if the modification was an update-operation.
rueisel

Hi Rueisel,
1. before starting replication, initialiaze yours destinations tables with DataPump. You can create a scripèt based on impdp/expdp ou write a PL/SQL package around DataPump API (not very difficult and well documented)
2. To propagate the changes from the Changes tables to the Destination tables, you have to write your own solution. The main principles is to
create a job that read the Changes Tables and update the Destination tables (use merge statements). The job can be stored on the Destination database or staging one. A database link must be created between Destination and staging database.
Warning: If you have to propagate some clobs/blobs objects, you have to create a specifc solution because you can not access them throught a database link.
I hope it's help,
Cyryl

Initial load with LOBs

Hi, i'm trying to do an inital load and I keep getting errors like these:
ERROR OGG-01192 Oracle GoldenGate Capture for Oracle, ext1.prm: Trying to use RMTTASK on data types which may be written as LOB chunks (Table: 'TESTDB.BLOBTABLE').
ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING.
The table looks like this:
COLUMN_NAME|DATA_TYPE|NULLABLE|DATA_DEFAULT|COLUMN_ID|COMMENTS
UUID     VARCHAR2(32 BYTE)     No          1
DESCRIPTION     VARCHAR2(2000 BYTE)     Yes          2
CONTENT     BLOB     Yes          3
I've checked and the source database does contain data in the blobtable and both databases have the same tables, so now I have no idea what can be wrong? =/

For initial loads with LOBs, use a RMTFILE and a normal replicat. There are a number of things that are not supported with "RmtTask". A "rmtfile" is basically the same format as a 'rmttrail' file, but is specifically for initial loads or other "captured" data that is not a continuous stream. And make sure you do have a newer build of GG (either v11 or a latest 10.4 from the support site).
The 'extract' would look something like this:
ggsci> add extract e1aa, sourceIsTable
ggsci> edit param e1aa
extract e1aa
userid ggs, password ggs
-- either local or remote
-- extFile dirdat/aa, maxFiles 999999, megabytes 100
rmtFile dirdat/aa, maxFiles 999999, megabytes 100
Table myschema1.*;
Table myschema2.*;
Then on the target, use a normal 'replicat' to read the "files".
Note that if the source and target are both oracle, this is not the most efficient way to instantiate the target. Using export/import or backup/restore (or any other mechanism) would usually be preferable.

Initial Load - AS ABAP - getting only user with a group

Hi,
when i start initial load, i just get users with groups. Is that standard?
Br,
Philip

First of all - you'll need to familiarize yourself with the database for effective learning and debugging. I'm talking about the MS-SQL or Oracle-DB where you installed the IC-schema. It often helps me to understand whats going on behind the scenes.
Secondly - I read some of your posts - I would advise you to install the dispatcher and everything on the server where the DB is hosted - at least as long as you're in development. The MMC can still be on your local pc/laptop, although some things won't work well there (Import, Dispatcher-Status, ...). This'll ease things a lot I suppose.
About the service-user... SAP delivers a role you can import into PFCG (SAP_BC_SEC_IDM_.SAP-File in misc-folder of installation media). This role should be sufficient for your communication user, is updated every now and then and contains only the necessary permissions. Maybe you'll have to extend it (Z_SAP_) in case you want to read special tables not supported by the SAP framework (e.g. license data).
I can hardly believe that the current role assigned to your user only has permissions to users with groups != empty
By now I have no clue why you only see users in IdM with groups assigned in SU01... look up the SQL-table I mentioned if there are more users.
BR
Michael

MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
          MacBook Pro (13-inch, Mid 2010)
          MacBook Pro - model: MacBookPro7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
          Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Logitech USB Receiver
                    Apple Inc. Apple Keyboard
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          None
Internet Plug-ins:
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
          AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               4%          WindowServer
               1%          EtreCheck
               0%          mds
               0%          mds_stores
               0%          airportd
Top Processes by Memory:
          111 MB          com.apple.IconServicesAgent
          94 MB          Finder
          57 MB          Dock
          53 MB          SystemUIServer
          53 MB          EtreCheck
Virtual Memory Information:
          1.64 GB          Free RAM
          1.42 GB          Active RAM
          314 MB          Inactive RAM
          390 MB          Wired RAM
          316 MB          Page-ins
          0 B          Page-outs

Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Initial Load of BUPA_MAIN to GWA_01 does not work

Hi all
I have a question concerning the serverside groupware Integration and the initial Load of BUPA_MAIN.
According to the groupware integration guide, I have to "Transfer Business Partner to Public Contact Directory".
This is done with transaction R3AS (Object BUPA_Main, Sender=CRM, Receiver=GWA_01 (the mBDOC site)).
When I want to chose the above options in R3AS I cannot select GWA_01 as receiver site (only CRM or OLTP is offered when I click F4). That means when I chose BUPA_MAIN as object I cannot chose GWA_01 as receiver site (fbut or other objects f.ex. GWA_* I can chose GWA_01 as receiver site).
I created all subsriptions needed (I had to recreate the publication "ALL Business Partners (MESG)" because it was missing in my system).
Does anyone have an idea what could be wrong?
Thanks in advance and Regards
Marco

Hi Marco,
Thank you for the reply.
The below steps i followed to customize Groupware Adapter. Please correct me if i went Wrong
     1) Generated Functions and Services for BDoc Types
2) Generated Replication Services
3) Generated R/3 Adapter Services
      4) Created Sites for Groupware Adapter
                    Name
     Groupware adapter 01 (mBDoc)
     Groupware Adapter 02 (sBDoc)
      5) Created Subscriptions for the Groupware Adapter
6) Enabled the Transfer of Business Partners to the Private Contact Folders.
7) Enabling the Transfer of Attachments from CRM to Groupware
                  TBD
      8) Prepared for Customizing Download
9) Loading the Customizing Objects to Groupware
       Note : TBD
10) Loading Business Partners to Groupware
Note : TBD
      11) Customizing Activities for Groupware Integration in IMG
Defined RFC Destination for the MapBox
Defined Internal SyncPoint Settings
Delete Timed Out Sessions from Status Table
           Maintained Application Scenarios
           Maintained vCard Properties
           Maintained vCard Sub-Properties
            Maintained iCalendar Priorities
            Maintained Groupware Adapter Properties
            Maintained General Groupware Settings
            Maintained Groupware Object Selection Fields
            Maintained Groupware Object Selection and Retrieval
            Maintained Groupware Object Master Category List
      12) Application-Specific IMG Views for Groupware Integration
             Maintained Business Partner Properties
             Maintained Business Partner Sub-Properties
             Mapped CRM Business Partner Properties to vCard Properties
             Mapped iCalendar Priorities and SAP Application Priorities
   Filter Condition for Business Partners Exchange with Groupware
      13) Activity Management -Specific IMG Views for Groupware Integration
Maped Activity Status to Groupwar
             Maped Task Status to Groupware
             Maped Activity Text Types and Business Partners to Groupware
All the above steps from 11 to 13,all the default entries were reentered starting with Z,is this ok.
Please let me now whether the above steps on customizing the Groupware Adapter which i followed are enough or i need to do any additional customization.
As we are using two sites, let me know how can i define RFC Destination for the MapBox.
How I can check whether ABAP MAPBOX is having the RFC Connection and it is activated.
Thanks & Regards
Pranav

Handling password while initial load process

Dear Experts,
This is about password handling in IDM. While doing initial load, I do not want to bring passwords from my target systems (AD/SAP) into IDM.
So which password(s) the users will use to login into target systems (AD/SAP) after initial load ? What can be achieved with pass "update system privilege trigger attribute" which is available in initial load job ?
Is it something like, IDM creates a default password on initial load which is sent back to target systems(from which initial load was done) which changes the password for the target systems to this new default password ?
Can we handle this default password being sent to target systems with the help of this pass "update system privilege trigger attribute" in initial load? so that this default password is not sent to target systems ??
So if the default password is not sent back to target systems after initial load, then users will keep using their existing passwords for their login in the target systems. After that, If I need to assign UMEJAVA only privilege to the users, the password for the target systems will be changed with the default password being sent on email to the users. Since the password on AD is now changed, how the users gonna login into AD to check their emails for the
new password ?
It seems I have written a BIG query here .... sorry for that. But please let me know if any thing above does not make any sense.
Also please share your views/expertise/best practice on the same.
Many thanks in advance!
Naveen
Version: IDM 7.2

Hi Naveen,
Firstly to answer your query on what basis we decide he backend type for your UMEJAVA repository, its the business. If you want users to authenticate against AD, when they try to login to IDM UI, you have to configure the LDAP as backend and you have to choose datasource as Microsoft ADS (Deep Hierarchy) + Database (ume database).
If you want the Users to authenticate against UME database, by default ume points to UME database and you need to create the users in the UME database.
So, if you have configured AS JAVA with ADS+Database, in IDM you have to select the repository as SAP netweaver as Java (ldap backend)
In the repository constants, there is an attribute called BACKED_REPOSITORY which should be your AD repository name that is configured.
If you have a look at the AS JAVA connectors in the provisionign framework, in the create user plugin, IDM first checks for backend type. If it is LDAP backend, it just sets the JAVA account attibute, If the backend type is DB, IDM will create the user in the UME database.
Considering your system details, i would suggest you the below approach.
1. Configure your UMEJAVA with Microsoft ADS (Deep Hierarchy) + Database (ume database). For more information on how to configure your
UMEJAVA with LDAP backend refer to this link
2. So, now the users who try to login to IDM UI or any app on AS Java, will be authenticated against your active directory.
3. Perform the initial load from HR.
4. Perform the initial load from AD.
5. Perform the initial load from you AS UMEJAVA.
6. Now, all the user information/role assignment information is loaded to IDM.
7. Now lets discuss about password management. There are two things here
a. Change password (by user) - User changes password in IDM --> password changes are provisioned to AD and user can login with new password.
b .Password reset self service. - User resets password in IDM --> password changes in AD (as UME is configured to use AD)
Change password (by user)
By default the users who are successfully authenticated when they try to login to IDM UI, will get access to self-services tab. To allow users to change the password on their own, you create the corresponding ordered tasks and maintain the access control tab for selfservice.
So that when users wants to change their passwords, they can change on their own.
How IDM will provision the new password to target system is something you have to configure the logic. For example, my sandbox looks like this.
Password reset self-service.
The user can reset their password on their own if they cannot remember their password. To implement this, look at this document. http://scn.sap.com/docs/DOC-17111
Hope this helps. please let me know for any further queries.
~ Krishna.

SAP IDM with MS Active Directory (OU names in Arabic)

Dear Gurus,
With SAP IDM , we need to integrate with MS Active directory such a way that SAP IDM only fetches users who have “SAP” in one of the AD field. That means do not read entire AD but only fetches users in SAP who have “SAP” tagged in one of the AD field.
Is it possible ? We tried that in SAP LDAP connector but its not possible in LDAP connector in SAP as LDAP connector is reading through all the users in our CUA system.
Question is it possible through SAP IDM that we use some thing (maybe BAPI) to restrict users and do not read all users but only users having “SAP” in one of the AD field.
Also note that our AD has some OU's name in Arabic.
Regards,

If you want to filter this in the ADS Initial Load job then you can modify the repository LDAP Filter:
(&(objectclass=person)(orgUnit=SAP))
Replace orgUnit=SAP with your your attribute and tag.
Br,
Chris

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
<b>Allot points if my post helps!!</b>
Best regards,
Vikash.

Query not run on initial load

I have an application with several pages. I have made them in the same way, but they act different.
What I have:
One region with a few select lists, and a submit button. The select list has a default value (which is sett identical in all pages in this discussion)
One region with a report, that runs a SQL based on the choices made with the select lists.
My problem is on initial loade, when I haven't made any choices in the select list. The defaults are set as expected. In some of the pages it loads as expected and the report looks nice and in accordance with the default values set in the select list. In some other pages it always starts wit ''No data found' in the report. Even when the select list has the correct defaults, and if I press the submit button the page reloads with the proper report. As far as I can tell I have made the two pages in the same manner.
It also return the expected result the second time you arrive at the page. So if the initial load returned no data found, and you navigate to another page and back again it will show the report with data.
My question is what can prevent the report from getting the proper defaults set and running the query on initial load of the page that is not the case when the page is resubmitted or loaded a second time.

I have looked at it without finding anything. I took an example from one page that has 3 out of 4 regions empty. The booked passenger region has data
This is the log from the initial log:
.00:
0.01: S H O W: application="106" page="1" workspace="" request="" session="716623568740864"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 716623568740864 can be used
0.01: ...Application session: 716623568740864, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.03: Region:
0.03: Item: P1_SHIP COMBOBOX
0.04: Item: P1_DEP_DATE MULTIPLESELECT
0.04: Item: P1_LEG COMBOBOX
0.05: Computation point: BEFORE_BOX_BODY
0.05: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.05: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.06: Region: Message
*0.06: Region: Gender Distribution*
*0.06: Region: Nationality distribution*
0.06: Computation point: AFTER_BOX_BODY
0.06: Processing point: AFTER_BOX_BODY
*0.06: Region: Booked passengers*
*0.07: Region: Age Distribution*
0.07: Computation point: BEFORE_FOOTER
0.07: Processing point: BEFORE_FOOTER
0.07: Region:
0.07: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:
This is the log after I press go and I get data in 4 of 4 regions:
0.00: A C C E P T: Request="Go"
0.00: Metadata: Fetch application definition and shortcuts
0.00: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -05:00
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Fetch session state from database
0.02: ...Check session 640739340114653 owner
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 106, page 1
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save Item "P1_SHIP" newValue="CFA" "escape_on_input=""
0.03: ...Session State: Save Item "P1_DEP_DATE" newValue="20100414" "escape_on_input="N"
0.03: ...Session State: Save Item "P1_LEG" newValue="All" "escape_on_input=""
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: Branch point: AFTER_PROCESSING
0.03: ...Evaluating Branch: AFTER_PROCESSING type: "REDIRECT_URL" button: 7515820301908562 branch: (Unconditional)
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="640739340114653"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 640739340114653 can be used
0.01: ...Application session: 640739340114653, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 1
0.02: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.03: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.03: ...NLS: Set date format="DD-MON-RR"
0.03: Computation point: BEFORE_HEADER
0.03: Processing point: BEFORE_HEADER
0.04: Show page template header
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: Region:
0.05: Item: P1_SHIP COMBOBOX
0.06: Item: P1_DEP_DATE MULTIPLESELECT
0.06: Item: P1_LEG COMBOBOX
0.06: Computation point: BEFORE_BOX_BODY
0.06: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.06: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.07: Region: Message
0.07: Region: Gender Distribution
0.07: Region: Nationality distribution
0.07: Computation point: AFTER_BOX_BODY
0.07: Processing point: AFTER_BOX_BODY
0.07: Region: Booked passengers
0.07: Region: Age Distribution
0.08: Computation point: BEFORE_FOOTER
0.08: Processing point: BEFORE_FOOTER
0.08: Region:
0.08: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

After Upgrade BI Initial load is taking much time

Dear Friends,
We had BW 3.5 on Windows 2003(32 bit) & SQL 2000.
I upgraded it to BI 7.01 (EHP1 SR1) with Windows 2003(64bit),SQL 2005 & completed all followup activities.
Now when we are doing initial load it is taking long time. Please do let me know your inputs as soon as possible.
Regards,
Sunil Maurya.

Hi ,
I created the thread under netweaver forum.
But still I'll check & try create it in correct forum.
Regards,
Sunil Maurya

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Initial Load Decentralized WM with HU active

Similar Messages

Maybe you are looking for