Initial Load is not starting

Hi,
On target , in accounts table there are three additional columns namely ,
S_JOB_ID NUMBER(19)
S_REPLICATED_DATE DATE
S_EXTRACT_IND NUMBER(5)
Out of this , S_JOB_ID should have null value. the value will be inserted by ETL later on. This is our business requirment.
I tried two options
COLMAP ( USEDEFAULTS , S_JOB_ID = ' ',
and
COLMAP ( USEDEFAULTS , S_JOB_ID = NULL,
but none of them worked.
Please help me.
Thanks,
Kamlesh

Well, an empty string is similar to null in some ways, but technically, an empty string is not null, so don't go with that approach.
Workaround - If you ignore that column and just try to update the other two (i.e., your target table does not have the S_JOB_ID column), does the initial load work? If so, you can alter the target table afterwards, add the column, default value is null.
Can you post your parameter files?

Similar Messages

GRC-IDM initial load job not enriching one system's privs

Hi GRC Experts,
We have integrated IDM 7.1 and GRC 5.3 and tested provisioning to one target system in DEV; this worked perfectly; when testing a similar configuration in Quality, we were setting up the system, and had to run the IDM-GRC Initial Load job in order to enrich the imported privileges for use with GRC AC 5.3; in the Quality system, instead of just connecting to 1 target system, we have connected to 5 ABAP systemes, ECC, PI, POSDM, BW & SRM; for some strange reason when performing the GRC-IDM Initial load job 4 of the target system's privileges get enriched, while the ECC system's privileges aren't getting enriched; I would say through random sampling all ECC profiles are getting enriched but none of the ECC privileges are getting enriched; why could this be happening? we've tried running the ECC Initial Load job and then the GRC-IDM initial load job about 8-10 times but with no luck; the set of privileges we're investigating are still not enriched; we also ran the GRC CUP role load job, also selecting the option to over-write all existing roles in the system; via this method the CUP roles have been refreshed twice so far, but running the GRC-IDM initial load job even after refreshing the ECC system's privileges in CUP has had no effect whatsoever, all ECC privileges are still left to be enriched, but strangely enough the ECC Profiles have been enriched.
Any clues as to why this could be happening? We've checked and re-checked and there is no filtering or delta being applied to any of the passes, so it really makes no sense. Is there something we should be doing apart from what we've already done? Would greatly appreciate your help with this!
Thanks a lot in advance!
Best regards,
Sandeep

What you could do is simply add the attributes by a background job to the privileges. This works fine in most cases. You need to be sure that GRC knows the role and then it is fine. The load only adds those 2 privileges and does nothing of any deeper complexity.
MX_AC_ROLEID = <rolename>
MX_APPLICATION_ID = <system name>

Load plan not starting from point of failure in obia 11

hi,
I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
Can someone explain how to use ODI start from point of failure feature in OBIA.
Thanks,
Paresh

JamesW wrote:
That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
Pesky Oracle Thanks guys for your help
FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
In this example, I don't even have a database named fubar ...
oracle:fubar$ pwd
/u01/app/oracle/product/11.2.0/db_1/dbs
2013-08-15 10:52:29
oracle:fubar$ ls -l init*
-rw-r--r-- 1 oracle oinstall 2851 May 15 2009 init.ora
-rw-r----- 1 oracle oinstall 35 Jan 31 2013 initorcl.ora
2013-08-15 10:52:36
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:52:39
oracle:fubar$ export ORACLE_SID=fubar
2013-08-15 10:52:48
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='init.ora';
File created.
SQL> exit
Disconnected
2013-08-15 10:53:05
oracle:fubar$ ls -l spfile*
-rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
-rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
2013-08-15 10:53:07
oracle:fubar$

Flash toolbar shows on initial load, but not on subsequent pages

Hi!
I have a flash toolbar which loads when you first hit the
site, but if you go to any other page, it doesn't appear until you
hover over it. Once you move your mouse over it, it pops right up.
This only happens in IE, not firefox.
Does anyone have any idea why this could be happening?
Thanks,
Shelly

I dont know if this means anything or not - but I just opened
a new page, no toolbar, did a tools > internet options >
delete files - once I hit ok after the cache has been deleted it
pops up. I just did this several times in a row on 2 different pc's
and it did the same thing!

Graphite Slot loading imac not starting

Hi,
I was given a Graphite imac and told it did not work and did not have a hard drive. I also purchased a second logic board, hard drive, and optical drive. Pressing the front panel power switch causes a small green led near the DIMM slots to light up for less than a second, and I hear a CRT turn on crackle, then nothing more happens. swapping logic boards does not change things. Having a clock battery in or out does not seem to matter. Any suggestions on what I should try next would be appreciated.
Thanks Mark

Hey Mark,
Here's the section on the battery:
"Troubleshooting Logic Board Battery - 14
Logic Board Battery
Important:
Apple highly recommends removing the battery when
handling the logic board. Make sure to use proper ESD protection
when handling modules.
The battery on the logic board controls the stored system settings,
such as date and time. It is only necessary to test the battery when
you can’t power on the computer, or the date and time are reset
every time the AC power is removed.
The battery is also used to power the PMU chip (because the PMU
chip keeps time and must always be running) when the computer
is unplugged from the wall (AC power). The PMU is
very
sensitive
and touching any circuitry that is connected to the PMU can cause
it to crash. If the PMU crashes, the battery life goes from about
five years to about two days if the PMU is not reset. Once the battery
goes dead, the PMU will reset the time and date to 12:00 AM
1/1/04 every time the AC power is removed. To fix this situation,
replace the battery and reset the PMU (refer to “Resetting
the PMU on the Logic Board” mentioned earlier in this chapter).
If the computer has a “No Power” situation, check the battery
before replacing modules. When checking the battery, make sure
the computer is unplugged. Measure the voltage across the battery’s
BT1 positive and ground terminals. The battery should read
3.3 volts to 3.7 volts. If it’s lower than 3.2 volts, replace the
battery and reset the PMU chip."
In my experience they're either over 3.3 volts, completely dead or a few tenths of a volt.
I have seen "PAV" in the discussion forums, does that refer to the small power >supply board coupled to the main logic board, on the same plane?
No that's the "down converter" It takes power from the PAV and converts it to logic board power. The PAV is the big brown board under the CRT. It has all those big parts on it.
What's the CPU speed? Also of the board you subed? How do I check?
If you're looking at the top of the board with the IDE and memory slots at the bottom right underneath there it will say: (eg on a 350 I have here) "part no." here 820-1051-A then "Apple Computer,Inc. ©1999" then a white barcoded label that says at the end 350MHz 64 MB
So this is a 350 that had 64 MB ram originally.
That I asked because depending on the speed the heat sinks will be in different places. This is only a problem if and when you get it booted and only between the 350-400s vs the 600-700s. There's also the issue of the heat transfer pads.
Richard

Middleware starts replicating before initial load

Hi folks,
currently i´m setting up the middleware to connect a live ERP with a fresh CRM. The initial load is not done yet, also a lot other configuration stuff. I noticed that at the time of registering the queues the middleware is connecting itself and listing first BDocs in SMW01. Mostly R3AD delta(!) material BDocs (which fail by mapping error currently) but also green ones like 'class message' or 'objcl_message' which seem to have dummy or real entries. This is a problem as i did not configure e.g. R3AC1 filters or number ranges yet.
I thought delta load is triggered first after initial load. How can i stop the middleware before i finish the configuration stuff. If there is a 'switch off' (like deactivate a business adapter object in R3AC1) i guess i would have to switch it on again just before the initial load and then risking uncontrolable connection againg before i can execute R3AS. I mean if i would e.g. deregister the queues i could end my configuration but i would have to register the queues just before initial load and would again having no control about the start of the replication. Is that a problem for you? - How do you handle that issue usually if you set up a new CRM?
Thanks

Hi,
Read these topics:
Re: Turning Bdoc On & Off, & its monitoring
Re: Deactivation of data exchange between ERP and CRM
Denis.

Initial Load of DD* tables

Hi everyone,
Just a hopefully quick and simple question. We set up a SLT Replication Server recently and created our first SLT Configuration into HANA. We have no need for real time so we choose a scheduled time out of office hours. The configuration was successful however the DD* tables appeared in a scheduled state. From what I thought these tables should populate (load) initially regardless of the schedule. What appeared to happen was that they were waiting for the first schedule to run. Is this expected? Without these populating initially we could not choose any real ERP tables to replicate.
We also tried with a non-SAP source (Oracle) and the DD* tables for that configuration were populated instantly even though that config was scheduled to run "off-peak" as well.
Thanks,
Marcus.

Hi Marcus,
As far as I understand your question, please find below my comments-
(sap source system scenario)
If the configuration is created with "schedule by time" option which I think is done in your case, then the replication server would replicate database changes to target system at the time set by you. Here the metadata of tables would be copied from source system tables[DD002L and DD02T]
yes, you are correct that ideally we should start with ERP tables replication after DD* tables are replicated successfully. This generally is faster but then depends upon the system.
(non sap source system scenario)
here the DD* tables are just initially loaded and not automatically replicated.
So you would find a difference in how the replication takes place in both scenarios.
Hope it answers to some extent for your query.
Regards,
Saritha K

Initial Load of BUPA_MAIN to GWA_01 does not work

Hi all
I have a question concerning the serverside groupware Integration and the initial Load of BUPA_MAIN.
According to the groupware integration guide, I have to "Transfer Business Partner to Public Contact Directory".
This is done with transaction R3AS (Object BUPA_Main, Sender=CRM, Receiver=GWA_01 (the mBDOC site)).
When I want to chose the above options in R3AS I cannot select GWA_01 as receiver site (only CRM or OLTP is offered when I click F4). That means when I chose BUPA_MAIN as object I cannot chose GWA_01 as receiver site (fbut or other objects f.ex. GWA_* I can chose GWA_01 as receiver site).
I created all subsriptions needed (I had to recreate the publication "ALL Business Partners (MESG)" because it was missing in my system).
Does anyone have an idea what could be wrong?
Thanks in advance and Regards
Marco

Hi Marco,
Thank you for the reply.
The below steps i followed to customize Groupware Adapter. Please correct me if i went Wrong
     1) Generated Functions and Services for BDoc Types
2) Generated Replication Services
3) Generated R/3 Adapter Services
      4) Created Sites for Groupware Adapter
                    Name
     Groupware adapter 01 (mBDoc)
     Groupware Adapter 02 (sBDoc)
      5) Created Subscriptions for the Groupware Adapter
6) Enabled the Transfer of Business Partners to the Private Contact Folders.
7) Enabling the Transfer of Attachments from CRM to Groupware
                  TBD
      8) Prepared for Customizing Download
9) Loading the Customizing Objects to Groupware
       Note : TBD
10) Loading Business Partners to Groupware
Note : TBD
      11) Customizing Activities for Groupware Integration in IMG
Defined RFC Destination for the MapBox
Defined Internal SyncPoint Settings
Delete Timed Out Sessions from Status Table
           Maintained Application Scenarios
           Maintained vCard Properties
           Maintained vCard Sub-Properties
            Maintained iCalendar Priorities
            Maintained Groupware Adapter Properties
            Maintained General Groupware Settings
            Maintained Groupware Object Selection Fields
            Maintained Groupware Object Selection and Retrieval
            Maintained Groupware Object Master Category List
      12) Application-Specific IMG Views for Groupware Integration
             Maintained Business Partner Properties
             Maintained Business Partner Sub-Properties
             Mapped CRM Business Partner Properties to vCard Properties
             Mapped iCalendar Priorities and SAP Application Priorities
   Filter Condition for Business Partners Exchange with Groupware
      13) Activity Management -Specific IMG Views for Groupware Integration
Maped Activity Status to Groupwar
             Maped Task Status to Groupware
             Maped Activity Text Types and Business Partners to Groupware
All the above steps from 11 to 13,all the default entries were reentered starting with Z,is this ok.
Please let me now whether the above steps on customizing the Groupware Adapter which i followed are enough or i need to do any additional customization.
As we are using two sites, let me know how can i define RFC Destination for the MapBox.
How I can check whether ABAP MAPBOX is having the RFC Connection and it is activated.
Thanks & Regards
Pranav

'User is Locked' error while trying to start initial load

While trying to start initial load of objects using R3AS, I am receiving error msg 'User is locked'. This rfc user is a dialog user with SAP_ALL. I even tried replicating using a new user, but ended up with same error. The user is not locked but still getting the same error msg via status 'SYSFAIL' in the queue. Any suggestions?
Thnx,
- AJ.

AJ,
The RFC user must be a communication user or a system user. I think you mentioned the RFC user is a dialog user, which would be wrong settings definitely.
Also as mentioned by Marcin, ensure the passwords in the RFC destination of SRM and R/3 are the same as the passwords in SU01 of the respective systems. To ensure this, click on remote logon for the RFC destination in SM59. If the screen doesnot change, this means your systems are connecting through the RFC user without any problem.
Please assign points, if answer is usefull !!
Sundeep

Message no. R1286 when starting initial load again

When I start the initial load again ( Customer_main from ECC to CRM ) , after changing the ppoma structure to make sure all data is there, for all customers that already have been replicated in the past I get the Message R1286 :
Business partner XXXXXX already exists. (CRM 7)
While this statement is ofc correct, the customer does already exist, in the past the customer was updated, and the bdoc processing status green. We have upgraded from SP4 to SP8, and now the error message is shown and the bdoc is not processed.
Has something changed ?
How do I update all my customers to reflect changes in filters / PPOMA or just update them to fix small replication problems.
I have the same message when I start a request instead of an initial load.
Thx !!
Edited by: Olivier Priem on Nov 25, 2011 1:54 PM

Any help is welcome ...

Error appearing in start initial load

Hi Experts,
I am getting an error during execution of the transaction 'R3as' (Start Initial Load). I am using the load object 'IPMBEAPRDSLS'.
When I am running the trasaction, system is throwing the error meassage "Initial Load is already running(or waiting), IPMBEAPRDSLS: object will not be loaded"
Kindly suggest some solution of this problem.
Thanks & regards,
Rupam.

Hello Rupam,
Abort the load of that object in txn:R3AM1.
Also, delete the queue entries like R3AI_<OBJECT_NAME> in txn:SMQ2.
This would let you to restrart the load again.
If again it goes to WAIT state , then it means that you do not have enough number of work processes to handle this load.
It happens if several other load are running.So you have to wait till other loads get finished or you need to increase the work process, if your hardware supports.
Hope this helps!
Best Regards,
Shanthala Kudva.

Query not run on initial load

I have an application with several pages. I have made them in the same way, but they act different.
What I have:
One region with a few select lists, and a submit button. The select list has a default value (which is sett identical in all pages in this discussion)
One region with a report, that runs a SQL based on the choices made with the select lists.
My problem is on initial loade, when I haven't made any choices in the select list. The defaults are set as expected. In some of the pages it loads as expected and the report looks nice and in accordance with the default values set in the select list. In some other pages it always starts wit ''No data found' in the report. Even when the select list has the correct defaults, and if I press the submit button the page reloads with the proper report. As far as I can tell I have made the two pages in the same manner.
It also return the expected result the second time you arrive at the page. So if the initial load returned no data found, and you navigate to another page and back again it will show the report with data.
My question is what can prevent the report from getting the proper defaults set and running the query on initial load of the page that is not the case when the page is resubmitted or loaded a second time.

I have looked at it without finding anything. I took an example from one page that has 3 out of 4 regions empty. The booked passenger region has data
This is the log from the initial log:
.00:
0.01: S H O W: application="106" page="1" workspace="" request="" session="716623568740864"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 716623568740864 can be used
0.01: ...Application session: 716623568740864, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.03: Region:
0.03: Item: P1_SHIP COMBOBOX
0.04: Item: P1_DEP_DATE MULTIPLESELECT
0.04: Item: P1_LEG COMBOBOX
0.05: Computation point: BEFORE_BOX_BODY
0.05: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.05: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.06: Region: Message
*0.06: Region: Gender Distribution*
*0.06: Region: Nationality distribution*
0.06: Computation point: AFTER_BOX_BODY
0.06: Processing point: AFTER_BOX_BODY
*0.06: Region: Booked passengers*
*0.07: Region: Age Distribution*
0.07: Computation point: BEFORE_FOOTER
0.07: Processing point: BEFORE_FOOTER
0.07: Region:
0.07: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:
This is the log after I press go and I get data in 4 of 4 regions:
0.00: A C C E P T: Request="Go"
0.00: Metadata: Fetch application definition and shortcuts
0.00: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -05:00
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: Fetch session state from database
0.02: ...Check session 640739340114653 owner
0.02: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 106, page 1
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save Item "P1_SHIP" newValue="CFA" "escape_on_input=""
0.03: ...Session State: Save Item "P1_DEP_DATE" newValue="20100414" "escape_on_input="N"
0.03: ...Session State: Save Item "P1_LEG" newValue="All" "escape_on_input=""
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: Branch point: AFTER_PROCESSING
0.03: ...Evaluating Branch: AFTER_PROCESSING type: "REDIRECT_URL" button: 7515820301908562 branch: (Unconditional)
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="640739340114653"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: NLS: Language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2233622453240425
0.01: ...Session ID 640739340114653 can be used
0.01: ...Application session: 640739340114653, user=CFA
0.01: ...Determine if user "OPS" workspace "1065304065321761" can develop application "106" in workspace "1065304065321761"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 1
0.02: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.03: Setting NLS_DATE_FORMAT to application date format: DD-MON-RR
0.03: ...NLS: Set date format="DD-MON-RR"
0.03: Computation point: BEFORE_HEADER
0.03: Processing point: BEFORE_HEADER
0.04: Show page template header
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: Region:
0.05: Item: P1_SHIP COMBOBOX
0.06: Item: P1_DEP_DATE MULTIPLESELECT
0.06: Item: P1_LEG COMBOBOX
0.06: Computation point: BEFORE_BOX_BODY
0.06: ...Perform computation of item: F106_DUMMY, type=FUNCTION_BODY
0.06: ...Performing function body computation
0.06: ...Session State: Save "F106_DUMMY" - saving same value: ""
0.06: Processing point: BEFORE_BOX_BODY
0.07: Region: Message
0.07: Region: Gender Distribution
0.07: Region: Nationality distribution
0.07: Computation point: AFTER_BOX_BODY
0.07: Processing point: AFTER_BOX_BODY
0.07: Region: Booked passengers
0.07: Region: Age Distribution
0.08: Computation point: BEFORE_FOOTER
0.08: Processing point: BEFORE_FOOTER
0.08: Region:
0.08: Item: P0_UPDATED DISPLAY_ONLY_HTML
0.08: Show page tempate footer
0.08: Computation point: AFTER_FOOTER
0.08: Processing point: AFTER_FOOTER
0.08: Log Activity:
0.08: Execute Count=0
0.08: End Show:

Initial load....start replicat in parallel

Oracle 11gR2 GG 11.1.1.1.5 Linux
All,
I am doing the initial load (to replicat file method) and wondering if it is possible to kick off the replicat process in parallel while the initial extract process is running. I ask this because it is taking really long for the extract process to finish as the tables are large and it seems like it does not start inserting any rows into the target table until it has completely finished the extract. I followed the following note [1195705.1] to get passed the 2GB file size limit issue.

Hi Karthik,
Start transaction GN_START to generate the missing objects. The status of the generation (generation errors) can be seen in transaction GENSTATUS.
Regards.
Manuel.

SAP PI 7.11 JAVA Stack do not start - Loading [PoolManager]...

Hello,
 
our Java Stack of our SAP PI 7.11 do not start. In the SAP MMC we get following error:
 
-1501 (Some managers fails to start)
 
I loooked into the std_server0 log and find this error: 
Loading [PoolManager]... [31] ms 
ERROR: Server process failed to start due to: 
java.lang.NoClassDefFoundError: com/sap/jvm/monitor/thread/ThreadWatcher$Callback 
 at java.lang.Class.getDeclaredConstructors0(Native Method) 
 at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357) 
 at java.lang.Class.getConstructor0(Class.java:2671) 
 at java.lang.Class.newInstance0(Class.java:321) 
 at java.lang.Class.newInstance(Class.java:303) 
 at com.sap.engine.core.Framework.loadSingleManager(Framework.java:601) 
 at com.sap.engine.core.Framework.loadManagers(Framework.java:394) 
 at com.sap.engine.core.Framework.start(Framework.java:329) 
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 
 at java.lang.reflect.Method.invoke(Method.java:585) 
 at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:155) 
 at com.sap.engine.boot.FrameThread.run(FrameThread.java:179) 
 at com.sap.engine.boot.StartFrame.work(StartFrame.java:93) 
 at com.sap.engine.boot.Start.main(Start.java:35) 
Caused by: java.lang.ClassNotFoundException: com.sap.jvm.monitor.thread.ThreadWatcher$Callback 
Now I post you the all of the Log-File: 
 
stdout/stderr redirection 
 
node name : server0 
host name : iilsrv02 
system name : IPE 
system nr. : 00 
started at : Mon Jan 09 13:57:24 2012 
JVMX version - Nov 5 2007 23:34:18 - 01_REL - optU - windows amd64 - bas2:88748 (mixed mode, sharing) 
(CompilerOracle exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources) 
(CompilerOracle exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain)
(CompilerOracle exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub) 
(CompilerOracle exclude com/sapportals/portal/prt/util/StringUtils escapeToJS) 
(CompilerOracle exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices) 
(CompilerOracle exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile) 
(CompilerOracle exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup) 
(CompilerOracle exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue) 
(CompilerOracle exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode) 
(CompilerOracle exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode) 
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects) 
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement) 
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence) 
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations) 
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto) 
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects) 
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory 
WARNING: The hash of package index [E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\index.list] is corrupted 
Reading kernel properties from kernelProperties.bin file... 
 Checked the data for 47 ms 
 Read the objects for 234 ms 
 Substituted the values for 31 ms 
Finished reading kernel objects for 265 ms 
Startup mode [NORMAL] and action [NONE] read 
AS Java version [7.11.3710.93986.20100429121726] is starting server process [ID2867950] on host [iilsrv02]... 
Loading [LogManager]... [157] ms 
Loading [PoolManager]... [31] ms 
ERROR: Server process failed to start due to: 
java.lang.NoClassDefFoundError: com/sap/jvm/monitor/thread/ThreadWatcher$Callback 
 at java.lang.Class.getDeclaredConstructors0(Native Method) 
 at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357) 
 at java.lang.Class.getConstructor0(Class.java:2671) 
 at java.lang.Class.newInstance0(Class.java:321) 
 at java.lang.Class.newInstance(Class.java:303) 
 at com.sap.engine.core.Framework.loadSingleManager(Framework.java:601) 
 at com.sap.engine.core.Framework.loadManagers(Framework.java:394) 
 at com.sap.engine.core.Framework.start(Framework.java:329) 
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 
 at java.lang.reflect.Method.invoke(Method.java:585) 
 at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:155) 
 at com.sap.engine.boot.FrameThread.run(FrameThread.java:179) 
 at com.sap.engine.boot.StartFrame.work(StartFrame.java:93) 
 at com.sap.engine.boot.Start.main(Start.java:35) 
Caused by: java.lang.ClassNotFoundException: com.sap.jvm.monitor.thread.ThreadWatcher$Callback 
Loader Info -
 
ClassLoader name: [system:Kernel] 
Living status: alive 
Direct parent loaders: 
 [library:core_lib] 
Resources: 
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\jenqulib.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcantlr~runtime.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtapi_for_assembly.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtimpl.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcache_pluginslib.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblframekrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_cacheimpl.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_classloadkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_clusterkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_configurationkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_databasekrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_licensingkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_lockingkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_logkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_poolkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_servicekrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_threadkrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblopensqlkernelimplOpenSQLKrn.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcjeoffline_deployimpl.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcjesessionmgmtimpl.jar
 E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcseclikeylikey_assembly.jar 
 
 at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:274) 
 at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:243) 
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353) 
 ... 16 more 
Have someone an idee where to find the error and how we could resolve it? 
Thanks and regards 
Martin

Hi,
You are right, JSPM will not start with server0 down. And server0 will not come up with SAP JVM not updated.
Perhaps you could try a manual update of the SAP JVM as mentioned in the thread:
SAP EHP1 FOR SAP NW CE 7.1 - java doesn't start after updating jvm
Hope it helps.
Regards,
Srikishan

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

Try Here > AMDS > http://support.apple.com/kb/TS1567

Initial Load is not starting

Similar Messages

Maybe you are looking for