Initial Parameter DB_WRITER_PROCESSES Does not Work

Sorry, I can't find my tips after replying.
My DB server version is Oracle 8.1.6.
The paramter dbwr_io_slaves is inactive. In test stage I use test server, most of which parameters are set as default value. So db_block_lru_latches = 1.
MY OS is Win2000 server.
I set the paramete because when I check v$system_event, I found the wait time of event db_file_parallel_write is very long. The time_waited is over 14 minutes and the average_wait is over 1 second.
Thanks and Best Regards,
Su Qian

Similar Messages

Initial Parameter DB_WRITER_PROCESSES Doesn't work

I set the initial parameter DB_WRITER_PROCESSES as 5 in init.ora file. But when I restarted the database, I found the parameter show as 1 and only DBW0 existed.
I don't know the reason, would you please help me?
Thanks and Best Regards,
Su Qian

Did you get a message in the alert log about starting dbwr processes failed?No, I havn't gotten the message.
Also, having multiple writers on a single cpu system could bring performance down. I think one rule of thumb is to have 4 cpus per writer.Thanks for your message. I will not re-set the parameter.
First, I'd like to let you know that the environment of my production database are as follows:
OS: HP-UX
Database Version: Oracle8 Enterprise Edition Release 8.0.4.2.1 - Production
The setting of DB Block: 2K
The main problem I come across is when running application the response speed of DB is very slow.
The first step I adopted was checking free space. After checking I thought it was sufficient. But when I adopted the second step checking v$system_event, I found the wait time of following events is high.
EVENT TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED AVERAGE_WAIT
db file parallel write 471 1 128370 272.547771
log file parallel write 30307 0 51440 1.69729765 (For reference)
pmon timer 37189 36806 11111071 298.773051
rdbms ipc message 142737 112253 66295957 464.462312
rdbms ipc reply 296 0 7167 24.2128378
smon timer 372 369 11082933 29792.8306
write complete waits 75 37 5149 68.6533333
According to the above message, I decided to tune I/O first. Is my thought right?
If dbwr is rather slow, these events should give som hints: free buffer waits, rdbms ipc reply, log file switch (checkpoint incomplete).Yes, when I had a look at the alert.log I found the error message: checkpoint incomplete. So I created a new log group.Perhaps the problem was too few log groups and not dbwr. If you do not have high free buffer waits dbwr should be ok :)I agree with you. I havn't high free buffer waits, so the main problem could be too few log groups. But I don't understand two points as follows.
1. Last Friday I had 4 log groups and the size of every group is 2M. when getting the message "Thread 1 cannot allocate new log, sequence 87816 Checkpoint not complete", I created a new log group of 2M. Normally, this operation should improve performance, but when I observed the statistics I found the average wait time of "db file parallel write" became more longer. (Please refer to the following list)
EVENT TOTAL_WAITS TIME_WAITED AVERAGE_WAIT DATE LOG_GROUPS
db file parallel write 471 128370 272.547771 2002-08-05 5
db file parallel write 798 88568 110.987469 2002-08-03 4
2. I think the shortage of log groups is caused by the archive of log group don't complete before overwirting. From the alert.log file I found the time of log switch is about 20 minutes. From my viewpoint 20 minutes is enough for log archive. Why is the log groups still short?
In addition, according to the setting of checkpoint parameters I think the checkpoint should occur only at the time of log switch.
NAME TYPE VALUE
db_block_checkpoint_batch integer 8
log_checkpoint_interval integer 1000000
log_checkpoint_timeout integer 0
db_block_max_dirty_target integer 4294967294
db_block_buffers integer 153600 (For reference)
Do you know the meaning db_block_checkpoint_batch? (I can't find it in the document of 8i, because it is obsoleted.)
From the alert.log file, I got the following errors.
1. Fri Aug 2 17:10:36 2002
Errors in file /lims/oradata/lab1/udump/ora_10976.trc:
ORA-00600: internal error code, arguments: [1237], [], [], [], [], []
(I got the error message occasionally.)
2. Fri Aug 2 16:57:37 2002
ORA-1652: unable to extend temp segment by 256 in tablespace TEMP
(I don't understand it clearly, because the size of temporary tablespace is 400M. I think it is large enough.)
3. Fri Jul 26 12:00:17 2002
Thread 1 cannot allocate new log, sequence 87816
Checkpoint not complete
Current log# 1 seq# 87815 mem# 0: /u02/oradata/lab1/db/redolab101.log
Looking forward your reply.
Thanks and Best Regards,
Su Qian

Sorting based on a parameter does not work

Hi All
I am using BI Publisher Reports with Siebel CRM 8.1.1.6. I have declared a parameter called "inputsort" in the CRM application as well as in the template by using <?param@begin:inputsort?> within the template. I can display the current value of the parameter using <?$inputsort?> without issues.
However, when I try using this parameter for sorting, it doesn work:
The report is created for a list of event attendees. When I do this, sorting works:
<?for-each:EeventsEventCheckAttendee?><?sort:ContactLastName?>
BUT when I do this, sorting does not work:
<?for-each:EeventsEventCheckAttendee?><?sort:$inputsort?>
although the parameter $inputsort does have a value of "ContactLastName".
What could be the reason??

never mind, I found the solution myself. For some reason, the correct way is:
<?for-each:EeventsEventCheckAttendee?><?sort:./*[name(.) = $inputsort]?>
I don't know why, but it works.

ORDS Template with parameter does not work

Hello everybody,
I can not get working a RESTful Service using the ORDS_SERVICES -API (ORDS version 3.0.0.343.07.58), same Query without parameter (hardcoded product_id) works fine.
declare
l_module_id number;
l_template_id number;
l_handler_id number;
l_parameter_id number;
begin
ORDS_SERVICES.delete_module(p_name => 'test_parameter');
l_module_id := ORDS_SERVICES.create_module(p_name => 'test_parameter',
                            p_uri_prefix => '/test_parameter',
                            p_items_per_page => 10,
                            p_status => 'PUBLISHED',
                            p_comments => null);
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info_10/',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = 2',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
/* now same result but with parameter */
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info/{product_id}',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = :product_id',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
l_parameter_id := ORDS_SERVICES.add_parameter(p_handler_id => l_handler_id,
                           p_name => 'product_id',
         p_bind_variable_name => 'product_id',
         p_source_type => 'URI',
         p_param_type => 'INT',
         p_access_method => 'IN',
         p_comments => null);
commit;
end;
The first template works fine:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info_10/
shows a jpeg image of a wallet.
The second template does not work:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info/10/
fails with error:
mapped request using: BasePathMapper [basePath=/xxx/] to: SCHEMA:apex|XXX
Choosing: oracle.dbtools.http.dispatch.DispatchMetaData as current candidate with score: MetaDataScore [score=0, matchedMethod= GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
, matchedPattern= /test_parameter/demo_product_info/{product_id}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=null, pagination=null, requiresPrivilege=null, transport=null]
methods:
GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
stack trace:
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: INT
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
at oracle.dbtools.http.cors.CORSFilter.doFilter(CORSFilter.java:35)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
I changed the add_parameter-call p_param_type => 'INT' to be p_param_type => 'STRING'
then error remains the same and strack trace says
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: STRING
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
Could you please confirm and fix,
kind regards,
Tom

This is a guess, but I suspect that ords_services.add_parameter() is not required at all.
Also, your URL /demo_product_info/10/ should not have the trailing slash (according to your template URI).
For more information, I suggest you look here:
ords.3.0.0.343.07.58.zip\ords.war\scripts\migrate\core\ords_migrate.plb
The migration package will show what is usually done for templates that already exist within APEX 4.2. I checked my templates and the ones with URI variables {in-curly-brackets} contain no records in apex_040200.wwv_flow_rt$parameters.
-Kris

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

F4 help on Parameter for ddic domain does not work

Hello,
I try:
Parameters: pa_waers TYPE WAERS.
WAERS is a ddic data element for currencies and also a domain with this name exists. The domain WAERS has a check table TCURC.
When I press F4 for my field PA_WAERS in the Selection Screen, I assume a value help from the check table TCURC.
I activated and re-generated my coding (as mentioned in the ABAP-Keyword help for "PARAMETERS") but it still does not work.
Does anybody has a clue why this does this not work.
The same thing is for a parameter:
Parameters ..... type CTU_MODE.
Domain CTU_MODE has value Fields (A, E, B) but also here on my program no F4 help occurs.
Thanks in advance
Stefan Berger

A value table is assigned to a domain. It becomes a check table when a foreign key relationship is established for a field in a table. The field uses the data element and the data element uses the domain.
For example, if you try:
PARAMETERS: PA_WAERS TYPE EKKO-WAERS.
You will get the F4 help you are looking for. If you use tran SE11 and view EKKO, find field WAERS, use tab Entry Help/check and you will see that table TCURC has been established as a check table. You can use the foreign key button to see the relationship that has been established between EKKO and TCURC.
Also, domains cannot be used to type a field. Your reference to CTU_MODE must be referring to a Data Element. I tried this in a 4.7 system and the F4 works for me. What version are you using?

Application Parameter does not work on migrating

We have encountered this various times.
When we add an application parameter to an existing application, it does not work on migrating.
We have to make a new service (application) and then attach the parameter to it, then it works.
What is the reason for this behavior?
Eg: I added the parameter WDDISABLEUSERPERSONALIZATION and set it to X in development. Works fine there. On migrating to UAT, it does not work. What's amiss?
Thanks in adv.

Hi Aishi,
maybe SAP Note [1332644|https://service.sap.com/sap/support/notes/1332644] "WDA Application Parameters are not changed in all clients" might be helpful in your case.
Best regards,
Andreas

WF initiator in another client does not work

Hi,
I have created my WF and the first step is a user decision (yes/no). In this I use the &_WF_INITIATOR& as the addresse of the WI. It works fine in the development client but not in another client and I wonder why.
When I check the protocol, system is telling me that there´s no agent available which is not true. I see in the container USxxxxxx and I also created an object in the container for passing the user name like USxxxxxxx and nothing. It does not work.
What could the problem be ??
Thanks

Hi,
I double-checked the task and it it general. I also checked the log for the step and there´s no WFINITIATOR nor WIACTUAL_AGENT.
In the technical details I see that the workflow´s container has the WFINITIATOR with USxxxxxx and in the next step (user decision) there´s no such information nor WIACTUAL_AGENT. Based on this I corrected my WF for passing WFINITIATOR to WIACTUAL_AGENT in the step (using the data flow).
The above does not work. I see now in the technical details USxxxxxx for WIACTUAL_AGENT in the step but the protocol still tells me that there´s to agent.
Any ideas ??

Minetest translation does not work on my machine.

Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
Dirk

Hi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3.

Bapi_document_create2 does not work correctly with attached file.

Hi all.
I hava a problem with bapi. I programmed below.
        ls_docdata-documenttype = 'BBS'.
        ls_docdata-description = 'JJW test'.
        ls_file-documenttype = 'BBS'.
        ls_file-ORIGINALTYPE = 1.
        ls_file-storagecategory = 'ZSTW_KPRO'.
        ls_file-wsapplication = 'TXT'.
        ls_file-docfile = entity_filename.
        append ls_file to lt_files.
        CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
          EXPORTING
            documentdata       = ls_docdata
            PF_FTP_DEST = 'SAPFTP'
            PF_HTTP_DEST = 'SAPHTTP'
          IMPORTING
            documenttype               =      lv_documenttype
            documentnumber           =     lv_documentnumber
            documentpart                =     lv_documentpart
            documentversion           =     lv_documentversion
            return                           =     ls_return
          tables
            documentfiles     = lt_files.
        call function 'BAPI_TRANSACTION_COMMIT'.
If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
regards.

Hi,
You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
FUNCTION ZATTACH_CREATE.
*"*"Update function module:
*"*"Local interface:
*" IMPORTING
*"     VALUE(FILE) TYPE SAPB-SAPFILES
*"     VALUE(STR_FILE_CONTENT) TYPE XSTRING
*"     VALUE(OBJECT_KEY) TYPE BAPIBDS01-OBJKEY
DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
        CLASSNAME TYPE BAPIBDS01-CLASSNAME,
        CLASSTYPE TYPE BAPIBDS01-CLASSTYPE.
DATA: IT_FILES TYPE TABLE OF BAPIFILES,
        IT_SIGNATURE TYPE TABLE OF BAPISIGNAT,
   FILES TYPE BAPIFILES,
SIGNATURE TYPE   BAPISIGNAT.
DATA: I_TOADD TYPE TOADD,
        FILENAME_ALL TYPE SAPB-SAPFILES,
        FILE_PATH TYPE SAPB-SAPFILES,
        FILE_PATH_MEMORY(250) TYPE C, " path für SAP memory
        FILE_PATH_LENGTH TYPE I,       " length of the file_path
       FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
       FILE_NAME TYPE SAPB-SAPFILES,
        FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
DATA: WA_FILE_CONTENT TYPE BAPICONTEN,
   STRING_CONTENT TYPE STRING,
   STRING_CONTENT1 TYPE STRING.
DATA:
   I_FILES TYPE TABLE OF BAPIFILES ,
        I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
        I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
       COMPONENTS TYPE BAPICOMPON ,
        I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
        I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
        I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
       MIMETYPE TYPE TOADD-MIMETYPE,
COMPID TYPE BAPICOMPON-COMP_ID, " compid for popup
        COMPID_FLAG(1) TYPE C,           " compid can't be changed
        MODIFY_FLAG(1) TYPE C,           " document is modified
        ATTRI_FLAG(1) TYPE C,            " attri can't be changed
        TITLE_FLAG(1) TYPE C,            " titel of the popup
        CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
        BUTTON_TEXT(10) TYPE C,
        INFO_TEXT(100) TYPE C,
VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
        VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
        VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
        TITLE_TEXT(100) TYPE C,          " title of the popup
        DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
*FILENAME_ALL = fileUpload_event->file_name.
* Transfering into SAP File server.
FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
FILENAME_ALL = FILE .
STRING_CONTENT = STR_FILE_CONTENT.
DATA: OUT_LINES TYPE TABLE OF XSTRING.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = STR_FILE_CONTENT
*   APPEND_TO_TABLE       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_FILE_CONTENT.
DELETE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
    IN TEXT MODE ENCODING DEFAULT.
* LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
*    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
* ENDLOOP.
CLOSE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
       IN TEXT MODE ENCODING DEFAULT.
READ DATASET '/userapps/master_data/claim1.txt' into STRING_CONTENT1.
* -- split filename                                                 -- *
    DATA: LENGTH TYPE I.
DATA: PATH2(1200). " LIKE sapb-sapfiles.
DATA: L_FILE(1200),
        L_DIR(1200),
        L_DELIMITER        TYPE C,
        L_OFFSET           TYPE I,
        L_BYTES            TYPE I,
        L_DELIMITER_OFFSET TYPE I,
        L_DELIMITER_BYTES TYPE I,
        L_CHAR             TYPE C,
        L_PREVIOUS_CHAR    TYPE C,
        L_LAST_CHAR        TYPE C.
PATH2 = FILENAME_ALL.
LENGTH = STRLEN( PATH2 ).
L_OFFSET = 0.
WHILE L_OFFSET < LENGTH.
    L_LAST_CHAR = L_CHAR. "remember last character
    L_BYTES = CHARLEN( PATH2+L_OFFSET ).
    L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
    IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
      IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
        "Typically we deal with absolute paths, so the first
        "delimiter is best. This allows for UNIX paths with
        "'' in the directory or file name
        L_DELIMITER = L_CHAR.
      ENDIF.
      IF L_CHAR = L_DELIMITER.
        L_DELIMITER_OFFSET = L_OFFSET.
        L_DELIMITER_BYTES = L_BYTES.
        "remember character in front of delimiter:
        L_PREVIOUS_CHAR = L_LAST_CHAR.
      ENDIF.
    ENDIF.
    L_OFFSET = L_OFFSET + L_BYTES.
ENDWHILE.
IF NOT L_DELIMITER IS INITIAL.
    L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
    L_FILE = PATH2+L_OFFSET.
    IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
      "path ends with or after drive identifer, include the delimiter
      L_DIR = PATH2(L_OFFSET).
    ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
      "do not include a trailing delimiter for compatibility reasons
      L_DIR = PATH2(L_DELIMITER_OFFSET).
    ELSE.
      CLEAR L_DIR.
    ENDIF.
ELSE.
    L_DIR = SPACE.
    L_FILE = PATH2.
ENDIF.
FILE_PATH = L_DIR.
FILE_NAME = L_FILE.
* -- set new file_path to SAP memory                                -- *
FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
    FILE_PATH_MEMORY = FILE_PATH.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ELSE.
    FILE_PATH_MEMORY = SPACE.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ENDIF.
* -- data declaration ------------------------------------------------ *
DATA:
        SINGLE_C TYPE C.
CLEAR: SINGLE_C.
LENGTH = STRLEN( FILE_NAME ).
IF LENGTH > 0.
    WHILE LENGTH > 0.
      SINGLE_C = FILE_NAME+LENGTH(1).
      IF SINGLE_C CO '.'.
        LENGTH = LENGTH + 1.
        EXIT.
      ELSE.
        LENGTH = LENGTH - 1.
      ENDIF.
    ENDWHILE.
    IF LENGTH > 0.
      FILE_EXTENSION = FILE_NAME+LENGTH.
    ELSE.
      FILE_EXTENSION = SPACE.
    ENDIF.
ELSE.
    FILE_EXTENSION = SPACE.
ENDIF.
IF FILE_EXTENSION <> SPACE.
    SET LOCALE LANGUAGE SY-LANGU.
    TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
    SET LOCALE LANGUAGE SPACE.
ENDIF.
* TR001++
DATA: I_TOADV TYPE TABLE OF TOADV.
DATA: WA_TOADV TYPE TOADV.
DATA: OBJECT TYPE SAEOBJART.
SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
          I_TOADV WHERE STANDARD = 'X'.
DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
* -- get name and description for the document                      -- *
CLEAR: COMPID,
         DESCRIPTION,
         VERSION_NR,
         MODIFY_FLAG,
         COMPID_FLAG,
         ATTRI_FLAG,
         TITLE_FLAG.
COMPID_FLAG    = ' '.              " -> compid can't be changed
MODIFY_FLAG    = 'S'.              " -> popup in save modus
ATTRI_FLAG     = 'X'.              " -> attri's can be changed
COMPID         = FILE_NAME.
VERSION_NR     = '00000001'.
VERSION_LANGU2 = SY-LANGU.
TITLE_FLAG     = '1'.              " -> BDN
* -- get the mimetype of the docuclass                              -- *
*PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
*                            CHANGING I_TOADD.
DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
SET LOCALE LANGUAGE SY-LANGU.
TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
SET LOCALE LANGUAGE SPACE.
SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                             DOC_TYPE EQ I_DOCUMENTCLASS.
IF SY-SUBRC NE 0.                    " nothing found -> default!
    I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
    I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
ENDIF.
MOVE I_TOADD-MIMETYPE TO MIMETYPE.
* -- fill file and signature structure                              -- *
CLEAR: I_FILES, I_SIGNATURE.
REFRESH : I_FILES, I_SIGNATURE.
DESCRIPTION = FILE_NAME.
FILES-DOC_COUNT = 1.
FILES-DIRECTORY = FILE_PATH.
FILES-FILENAME = FILE_NAME.
FILES-MIMETYPE = MIMETYPE.
APPEND FILES TO I_FILES.
* -- fill components and signature structure                        -- *
COMPONENTS-DOC_COUNT = 1.
COMPONENTS-COMP_COUNT = 1.
COMPONENTS-MIMETYPE   = MIMETYPE.
COMPONENTS-COMP_ID         = FILE_NAME.
APPEND COMPONENTS TO I_COMPONENTS.
SIGNATURE-DOC_COUNT = 1.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTCLASS'.
SIGNATURE-PROP_VALUE = FILE_EXTENSION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
*IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
*ELSE.
* I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
*ENDIF.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTTYPE'.
SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'DESCRIPTION'.
SIGNATURE-PROP_VALUE = DESCRIPTION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'LANGUAGE'.
SIGNATURE-PROP_VALUE = VERSION_LANGU.
APPEND SIGNATURE TO I_SIGNATURE.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
    EXPORTING
*   LOGICAL_SYSTEM        =
      CLASSNAME             = 'BUS2222' "classname_select
      CLASSTYPE             = 'BO'" classtype_select
    CLIENT                = SY-MANDT
      OBJECT_KEY            = OBJECT_KEY
    BINARY_FLAG           = 'X'
* IMPORTING
*   OBJECT_KEY            =
    TABLES
      SIGNATURE             = I_SIGNATURE
      COMPONENTS            = I_COMPONENTS
    CONTENT               = I_FILE_CONTENT
*   ASCII_CONTENT         =
* EXCEPTIONS
*   NOTHING_FOUND         = 1
*   PARAMETER_ERROR       = 2
*   NOT_ALLOWED           = 3
*   ERROR_KPRO            = 4
*   INTERNAL_ERROR        = 5
*   NOT_AUTHORIZED        = 6
*   OTHERS                = 7
COMMIT WORK AND WAIT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFUNCTION.
Message was edited by:
        Raja T

VIEW_ENQUEUE does not work

Hello;
I try to lock and unlock a table using fm VIEW_ENQUEUE. Lock mechanism works and i observe an entry in SM12. Within another session i call VIEW_ENQUEUE again with delock parameter but it does not work; the lock is deleted only when the locking sesion is canceled. Is this the normal process or do i make something wrong?
Thx in advance,
Ali

Please surround code with two lines of
like so:
T2TU wrote:
#import <stdio.h>
#import <stdlib.h>
#ifndef YES
#define YES 1
#endif
#ifndef NO
#define NO 0
#endif
typedef struct stackNode {
char top;
struct stackNode *next;
}stackNode;
typedef stackNode * QueueNodePtr;
void initQueue (QueueNodePtr *front, QueueNodePtr *rear);
void pushQRear(struct stackNode **front,struct stackNode **rear, char n );
int QIsEmpty( QueueNodePtr front, QueueNodePtr rear);
int main (int argc, const char * argv[]) {
QueueNodePtr headPtr, tailPtr; //creates two pointers to the structure StackNode
printf("Thank you for your help with this PushQRear()!
char value;
initQueue( &headPtr, &tailPtr);//only sending a copy of headPtr, and tailPtr. 27 Jan 2010 at 9:54 AM
value = 'Q';
pushQRear(&headPtr, &tailPtr, value);
printf("
After Q: address of headPtr %p, and tailPtr: %p",headPtr, tailPtr);
value = 'U';
pushQRear(&headPtr, &tailPtr, value);
printf("
After U: address of headPtr %p, and tailPtr: %p",headPtr, tailPtr);
return 0;
void initQueue (QueueNodePtr *front, QueueNodePtr *rear)
*front = *rear = NULL;//changes the initial value of the pointer to NULL
void pushQRear(QueueNodePtr *front, struct stackNode **rear, char n)
QueueNodePtr newPtr;//same as struct stackNode *newPtr
if( (newPtr = (QueueNodePtr ) malloc( sizeof (QueueNodePtr) )) == NULL )
printf("
Not enough memory to for the push() operation!!!");
exit (10);
newPtr->top = n;
newPtr->next = NULL;//newPtr is inserted in the rear of the linked list
if( QIsEmpty(*front, *rear) )
*front = newPtr;
//*front = *rear;
*rear = NULL;
printf("
initially empty: *front = newPtr");
else
// (*rear)->next = newPtr;
// *rear = newPtr;
(*rear)->next = newPtr->next;
(*rear)->top = newPtr->top;
int QIsEmpty( QueueNodePtr front, QueueNodePtr rear)
return ( front == rear )? YES: NO;

Unable to install "Mavericks" as it asks for my 'Admin Password" and it does not work. Have not used it since I got my iMac in 2008. First upgrade to do so. Any solutions please?

I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
I am running Mountain Lion successfully.
I have my original disks as supplied and also a Snow Leopard install disk.
I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
How can I repair this situation.
Thank you to all those who respond.

Thanks for your reply.
I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what.

Logout does not work in OIM after enabling OAM SSO

We have installed a webgate to protect xlWebApp in OIM. Once the SSO is enabled, the logout does not work in the OIM user interface. How to solve this issue?
Metalink has a solution where we need to add document.location="http://host:port/access/oblix/lang/en-us/logout.html"; in xlWebApp\tiles\tjspLogoffTiles.jsp. This is the logout URL of OAM. Is there any other way so we can have a logout page in the OIM application/server itself?
Thanks.

Kevin,
I did what you suggested and initially it looked like it is working but there is slight issue. When I click Logout, it redirects to the logout screen. After logging out when I try to access xlWebApp it prompts for the login (i am using basic authentication). If I cancel it and again try to access xlWebApp, it lets me in without any prompt. This issue is in IE only but not in Firefox. Not sure what's the issue.
Btw, to make the logout screen work, I had to unprotect the following with None Authentication:
- /xlWebApp/pages/logout.html (logout page)
- /xlWebApp/images
- /xlWebApp/css/Xellerate.css
- /xlWebApp/css/style.css
Thanks.
Edited by: user504421 on Mar 16, 2009 9:52 AM
Edited by: user504421 on Mar 16, 2009 10:00 AM
Edited by: user504421 on Mar 16, 2009 10:01 AM

Solved rEFInd does not work after update

Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)

@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

Initial Parameter DB_WRITER_PROCESSES Does not Work

Similar Messages

Maybe you are looking for