Call the document Approval Workflow screen from a custom KM Details Page

Hi,
We are trying to call the Approval Workflow screen from a custom developed KM Details page (using JSPDynpage). How can this event be triggered. We want to trigger the same event that gets called when a user clicks on the Approval Option under Settings in the Details page for a KM resource. Quick response would be much appreciated.
Thanks and Regards,
Shibendra

Hi,
Refer below links:
https://blogs.oracle.com/prajkumar/entry/call_oaf_page_from_d2k
http://oraclearea51.com/11i-oa-framework/17-technical-articles/technical-articles/325-how-to-call-oaf-page-from-form-personalization.html
http://oracle.anilpassi.com/call-oa-framework-page-from-oracle-forms-passing-parameters-2.html
--Sushant

Similar Messages

After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it. Maybe client integration or authentication settings? I have looked at it in wireshark
and have not seen anything glaring.
Steps to reproduce the (working) behavior:
Set up a document library in SharePoint 2010.
Under versioning settings, make the following changes:
Set Require Content Approval for submitted Items to Yes
Select Create Major and Minor (draft) versions
Set require checkout to Yes
Create an out of the box “approval” workflow with the following settings:
Start this workflow to approve publishing a major version of an item.
I then create a new document. Save it. check it in. it is now version 0.1.
I then open it again. check it out. Make a change. Close and save it.
Check it in.
Publish major version:
At this point a screen is presented to me to enter workflow parameters. This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
This is what I need help with. It should come up in 2010. To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port. I did this for 2010 and it did not work.
Any help or ideas is very appreciated. Thanks very much in advance.

Hi Chris,
According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Document Approval Workflow Question

I have a document approval workflow set on a document library, because I want the documents to require approval by the approver before they can be seen. I also have versioning set on the library. However, once the documents are approved and then later
changed, the Document Status is reset to Draft and requires approval again. Is there a way to use either Document Approval or Versioning or a combination of both to keep the document in a draft state and not viewable until approved, and then not change states
again if changed? Thank you!

Hi,
The screenshot is Content Approval option in Document library settings. As we can tell from the explanation in the left part, content approval is designed to specify whether new items or changes to existing items should remain in a draft state until they
have been approved. It will work both when a document is uploaded to library and when a document is edited.
If you would like approval only happen on first uploading but not on lated editing, then you might use other method for approval progress.
As workaround, you could use OOB approval workflow and specify it to start only when an item is created, so that the approval progress will only happen on first uploading.
https://support.office.com/en-nz/article/Understand-approval-workflows-in-SharePoint-2010-a24bcd14-0e3c-4449-b936-267d6c478579
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Out of the box approval workflow suddenly failed on start (retrying)

SharePoint 2010. I've been using out of the box approval workflow for several month now. I did some minor changes to it, like to who and when emails should be send, but that's all.
Then out of a sudden it stopped working. New request status is "Failed on start (retrying)". Sometimes (!) status is "In Progress", but no tasks are created. In both cases there is nothing on workflow history and error report is also empty
(it even cause an error "Report contains no data").
I'm sure that I didn't change anything in a workflow. The only think that I changed was an InfoPath form, but I only added there field "Created By", so I would see in calendar later who created this request. I couldn't see how this might affect workflow
process.
I'm confused as I don't even know where to start searching for the solution. Why this might happen? Any ideas are very welcome!

In my list I have a multiple choice field which is not required. When it was
blank my workflow was failing on start! This field was not involved in a workflow directly, I included it only in the email to approver. When I deleted it from an email everything was fine.

Creating a Simple document Approval workflow in SPD

Hi
Having configured workflow manager 1.0 I have attempted to create the simplest approval workflow.
on my document library I set content approval , content type management and versioning. I have left out check in and checkout to speed up my testing
Create a single stage workflowin SPD2013 associated with my Document Library
I upload my document set the various properties as defined in my custom content type
Document "Approval Status" states "Draft"
I (optionally) checkin and Publish a major version of the document, "Approval Status" is "Pending"
I manually trigger the my w/f setting myself as the approver
I want pass my Task Outcome to the Approval Status property in my current item - I am just not sure how to do this without setting the item back to draft
I am just not sure of the syntax - could anyone help?
Daniel

Now if I was building a SharePoint 2010 workflow .... I seem to have richer support for content approval
....... Was there beauty contest for the 2010 actions!!!!!!!!
Freelance consultant

Calling the subscreen into main screen

Hi Guru's,
      I am having a main screen, which holds 2 radio buttons.
      If I select one radio button it has to call one table control, if I select 2nd radio button it has to call different table control.
      For this I have created two subscreens, each one holds a table control.
based on the selection of radio button I have to call these subscreens in to the main screen.
   Please help me how to call the subscreen into main screen.

There is no help text for this dump
Either the text was inadvertently deleted or the release of
the kernel differs from the release of the database
Refer to the Note system for further information on            this dump.
000160           %_archive TYPE arc_params,
000170         END   OF COMMON PART.
000180   *
000190   FIELD-SYMBOLS: <%_1>   %_PREDEFINED.
000200
000210   DATA: %_repid     TYPE syst-repid   %_PREDEFINED,
000220         %_viaselscr TYPE x VALUE '04' %_PREDEFINED.
000230
000240   SYSTEM-EXIT.
000250   PERFORM (sy-xform) IN PROGRAM (sy-xprog).
000260
000270   * Nach Laden des Dynpros
000280   MODULE %_ctl_init OUTPUT.
000290     %_repid = sy-repid.
000300     PERFORM %_ctl_init IN PROGRAM sapmssyd USING %_repid IF FOUND.
     >   ENDMODULE.
000320
000330   * Um DCO
000340   MODULE %_ctl_output OUTPUT.
000350     %_repid = sy-repid.
000360     PERFORM %_ctl_output IN PROGRAM sapmssyd USING %_repid IF FOUND.
000370   ENDMODULE.
000380
000390   * Um DCI
000400   MODULE %_ctl_input INPUT.
000410     %_repid = sy-repid.
000420     PERFORM %_ctl_input IN PROGRAM sapmssyd USING %_repid IF FOUND.
000430   ENDMODULE.
000440
000450   * Erstes Modul in PAI
000460   MODULE %_ctl_pai INPUT.
000470     %_repid = sy-repid.
000480     PERFORM %_ctl_pai IN PROGRAM sapmssyd USING %_repid IF FOUND.
000490   ENDMODULE.

OIM 11gR2 - Out-of-the-box Approval Workflows

Does anyone know of any good resources that describes the out-of-the-box approval/provisioning workflows of 11g R2? I have searched Google back and forth but found nothing. Some of the workflows are obvious by their name (such as default/BeneficiaryManagerApproval!1.0), but others are not so clear regarding their flows.
On that same note, can one of the out-of-the-box approval workflows be configured to route to an approval group instead of single users?
Thanks for your help!

Instead of searching for docs in google i guess reverse-engineering on your own will be the best way to understand the approval workflows. Navigate to OIM_HOME/server/workflows/composites. It will contain all the approval workflow zip files. Unzip the required one which you want to understand and there will be a .jws file in it. Now open that in jdeveloper and open AprrovalProcess.bpel and composite.xml. It will show how the approval routes and what are the business rules written, everything. It is the best way to understand the approval workflows.
In the same way u can make changes to the out-of-the-box approval workflows also. See this OBE tutorial to understand how you can assign the approval to a group
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/Request_Workflow_for_Self_Registration/request_workflow_for_self_registration.htm
Also please try the approval workflow given in the developer's guide which covers most of the basics.
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/request.htm#CIHFBEFB

How can i call the certificate selection dialog box from source code?

How can i call the certificate selection dialog box from source code?
NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
Thank You in advance

I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609
The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
Thank you,
Hecuba
Mfg. Test Engineer
Certified LabVIEW Associate Developer

I need to call the Run continously button programmatically from MFC application .

I have create Labview application from sample VI and with help of VirtualInstrument class I am to access the methods like Run ,SetControlValue and getControlvalue .But for VI we have Run continously button also .how do I programmatically call the Run continously button opteration from my applciation using VI methods.

"Run Continuously" is not something that should be used in an application. (There are very few legitimate uses for continuous run, e.g. to quickly play with a few input parameters while debugging a subVI independent of the main application. The equivalent in your case would be to just place the run invocation in a loop and call it repeatedly. This is definitely not the way to do it!)
Why don't you simply place a big while loop around all the code inside the VI that needs to run continuously?
See also THIS recent discussion.
LabVIEW Champion . Do more with less code and in less time .

FPM Raise Custom Event - Navigation to a FPM Screen from one custom FPM Scr

Hi
I added an introductory screen ( start up screen ) to the FPM Framework for a bank ESS application.
Its showing up fine with in the RoadMap. ( used IVAC window... )
How can i navigate to the following FPM Screen from my custom introductory FPM Screen.
I had also defined an event link in the service config FPM Application.
But i don't know how to raise that custom event or how to make a custom event.
RAISE_EVENT. ... only shows standard events i guess.
( i have the SDN DAY Document ) but, Its an urgency , at the moment....

The question is How can i add a custom event and call it, in order to go to the next screen ( Overview Screen ) from my custom FPM Introduction screen ?
Any one ?

Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation

Hi,
We have customized Quote Approval Workflow (ASOAPPRV) XXXASOAPPRV, would like to understand how to setup that custom workflow XXXASOAPPRV will be triggered for Quote Approval process, when we submit the Quote for approval from Quotes screen.
Appreciate your help on this.
Regards,
Ram

Pl see your duplicate post here - Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Srini

Has anybody found a fix to The document could not be printed and There were no pages selected to print error

Has anybody found a fix to "The document could not be printed" and "There were no pages selected to print" error?
I am using a Mac and I'm running the latest versions of OS X 10.6.8 and Adobe 11.0.10 but I'm unable to print. I need REAL HELP not a suggestion or a get around! and NO print as an image doesn't work, nor do I see that as a fix!
Please help!

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

Call purchase requisition approval workflow in abap program

Hello,
I copied the standard workflow for the approvaI of a purchase requisition WS00000038 and i tested it. I create a purchase requisition in me51n. This is triggering the event releasestepcreated which starts my workflow. Everything goes ok.
Now, i want to call this workflow in ABAP. I do not know exactly how to do it. Here is the code I tried.
data: ls_objkey type SWR_STRUCT-OBJECT_KEY,
lt_mesage type table of SWR_MESSAG,
gt_container type table of swr_cont,
gs_container type swr_cont.
gs_container-element = 'ReleaseCode'.
gs_container-value = '01'.
append gs_container to gt_container.
gs_container-element = 'requisition'.
gs_container-value = '0010000362'.
append gs_container to gt_container.
gs_container-element = 'RequisitionHeader '.
gs_container-value = '0010000362'.
append gs_container to gt_container.
ls_objkey = '0010000362'.
CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
EXPORTING
object_type = 'BUS2009'
object_key = ls_objkey
event = 'RELEASESTEPCREATED'
TABLES
input_container = gt_container
MESSAGE_LINES = lt_mesage.
As you can see i filled he RequisitionHeader, requisition and release code. I saw in the workflow that i copied, that these are import parameters. Requisition and release code are mandatory. 0010000362 is a purchase requisition that i created.
After i run the program i receive a work item in SBWP but it has the status error.
Can you help me?Perhaps anyone has done this. I think that i am not filling the correct data or something like that. Maybe you can look in the standard workflow WS00000038 and tell me what I should pass and how.
Thank you,
Efren

Hi Efren,
The Problem is, for the purchase requisition there is two key fields.
So when you pass the keyfiled to workflow it should be the concatenation of Purchanse requisition number and the item number.
You have to pass the object key as below.
ls_objkey = '00100003620010'.
Then only your business object will getting insatanciated.
Thanks,
Viji.

How can I retrieve the document line status value from UI

Hi,
Right now I need to do some check with the each document line status in UI, but it seems it doesn't exist in the the matrix. When I try to use code like this:
oEditText = (SAPbouiCOM.EditText)oMatrix.Columns.Item("LineStatus").Cells.Item(i).Specific;
It gives me Invalit Column error, I guess the line status field does not exist in the matrix. Do I have to use DI or SQL query to retrieve the like status value?
Thanks,
Lan

If the document is open on the screen, you can of course get line status from the UI.
It is column 40:
oEditText = (SAPbouiCOM.EditText)oMatrix.Columns.Item("40").Cells.Item(i).Specific;

Deactivating the Invoice Approval Workflow in SRM 5

Hi WF GurusM
We are setting up Invoice Entry in SRM 5.0 and get the message: No approval workflow found. Inform system administrator.
Please can you recommend how we can temporarily deactivate this workflow, so that we no longer get this message. We have looked in SWB_COND but could not work out which WF the system is trying to call.
Regards. Steve Walsh.

Hi Steve,
You can check which workflow is getting called using the following approach:
1. Activate event trace using t-code SWELS.
2. Go to t-code SWEL. Check the BO and event getting triggered while setting up Invoice Entry in SRM.
3. Check the receiver type of the BO event. This would show all the workflows that are receivers of the BO event.
4. Else, check in t-code SWETYPV and check the event linkage of the BO event to the workflows.
This would surely give you the workflow getting triggered on this event.
Hope this helps!
Regards,
Saumya

Call the document Approval Workflow screen from a custom KM Details Page

Similar Messages

Maybe you are looking for