Unable to install "Mavericks" as it asks for my 'Admin Password" and it does not work. Have not used it since I got my iMac in 2008. First upgrade to do so. Any solutions please?
I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
I am running Mountain Lion successfully.
I have my original disks as supplied and also a Snow Leopard install disk.
I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
How can I repair this situation.
Thank you to all those who respond.
Thanks for your reply.
I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what.
Similar Messages
-
I am trying to install vmware fusion 5-1.0.2 on osx 10.8.2 and it just keeps asking for the admin passoword for the computer. I keep putting it in with no luck. I have installed other programs with no issues.
If yours is the only user account on the Mac, it will have Admin privileges by default, so just type your password. Provided the installer is legit (i.e., downloaded from VMWare's servers and not some shady place), it needs Admin privileges since it needs to add stuff in the innermost folders of the OS for virtualization to work.
If your user account does NOT have admin privileges, you will need to have someone who does install Fusion for you. No way around this. -
When I try to download apps or update apps on my iphone I'm being asked for a password to an apple id (email address) that I have not created or linked to my account. I've tried re-setting my apple id - but same message keeps appearing - so can not access itunes app store or update apps I've already downloaded.
Has any one else experienced this? Or any ideas how to remove this email address?You cannot merge accounts.
You need to sign into the old account on your computer.
iTunes Store: Retrieving and changing passwords (Apple ID) -
Maverick install is asking for an admin password which I never set up to begin with.
Maverick is asking for an admin password which was never set in the beginning. I have tried all help suggestions to no avail Help
I got to the same problem, because I have'nt an idea about my administrator password.
So I did reboot with command + R, then open Terminal, then define an administrator Kennword, then restart with pull down menu.
Restarting and opening the user ...(Systemeinstellung;Benutzer) the new setted password works, it is, it can be used to unlock user administration. But willing to start Maverick.....it does not work.
So at this time no Maverick....
Has any one a clue about what has to be done? -
I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I imputed it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How do I get the serial number from my 3 version so I can activate my version 4 program
If you have Lightroom 3 still installed, you can get it from there.
If you don't and you have your box/disk, it should be on there.
IF you don't have either of those,and you registered your software, you can log into your Adobe account and retrieve it there. -
When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.
Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well... -
My brand new Mac ProBook keeps asking for an admin password to download Adobe Flash Player
My brand new Mac ProBook (OSX Mavericks 10.9.4) keeps asking for an admin password to download Adobe Flash Player and also when I try to set up adding my printer. The problem is that when I initially set up this new laptop--I opted to not have any password upon login. So what is my admin password that it keeps requesting??--that "I" did not create??
I have heard that Adobe Flash Player and Apple OS & iOS do NOT care much for each other.
Now half of Youtube videos would NOT play and many websites would NOT show on my Mac computer.
This is absolutely rediculous!
Because of the unfair monopoly, I have switched from Microsoft Windows PC to Apple Mac system a few years ago.
Is it a MUST and worthy for corporations to compete each other by screwing up customers like this?
What a shame!
Big things have small beginnings and so do big failures!
I think I will delay the idea of buying any more OS or iOS products until I can easily watch all the Youtube videos and browse all the websites! -
Keeps asking for my hotmail password and saying its wrong stopped recieving mail
keeps asking for my hotmail password and have stopped recieving mail
Mail asks for your password when it cannot contact the Server. It presumes [usually incorrectly] you told it the wrong password, and asks for a better one. The one you enter replaces the one that is stored.
But often the reason it cannot connect is that the Mail Server holding your emails is temporarily DOWN.
Ignore those requests and take that account Online again later.
(You may have to re-enter the password, because it often clobbers your good password with the one you enter, and sometimes does not store ANY password after that stupid dialog box.) -
When i try to get a App it asks for my exchange password and im not real sure what that means?
I have a iphone3 and when i try to get a App it is asking for my EXCHANG password and im not sure what that is. Its not my apple account password bc i tried that, someone please help!
Do you have an Exchange Mail account on your phone? "Get an App" - are you referring to downloading from the App Store? That should NOT ask for an Exchange acct password, only your iTunes account password.
-
I am trying to add a game to my sons I touch pad. It is a free game. It asks for verification of password and credit card info. Every time, it tells me that my time has expired. Help.
It asked me that too.Don't worry and just put it in. Itunes doesn't charge unless your son buys something. The password happens to me all the time. Credit card was only once. Just make sure your son knows not to buy anything without permission so he doesn't accidently charge you something.
-
I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?
where did you get this phone from
-
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
what is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.
It's the password for your outgoing mail in your Mail account. You need to set it up in your Preferences.
Regards
TD -
I am trying to download a flash player but my computer is asking for a tchnical password and I do no
I am trying to download a flashplayer and my computer is asking for the technical password for the computer and I do not know it. How can I work around that?
There IS NO password required to "download" Flash Player, but...
You CANNOT install software without your system administrator password, and that's with ANY software, not just Flash Player or Reader. -
It asking for a admin password
so looking at do the update to OSX MAverick download it and go to install it and ask for a administrater password but i cant remember every settting one so how do i find out where to reset it or find out where i could find it
Your Admin Password is what is used when you say Lock your computer or Re-Boot it..
To Find it you Go to-->System Pereference>User&Groups.
Maybe you are looking for
-
Dropped my laptop...some things work, some don't...
Hello all. Thanks in advance for any help. I have what I believe is the original macbook pro 15" aluminum model. I've had it for maybe 3 years and it's had some issues. The dvd drive hasn't worked for years, I've had to replace the logic board, keybo
-
BPC 7.5: Delta Load when loading from BI InfoProvider
Hi, in BPC 7.5 running a package based on Process Chain "CPMB/LOAD_INFOPROVIDER" loads data directly from an SAP BI Infoprovider into an BPC-Cube. According to the options you can choose "Merge Data Values" or "Replace & Clear DataValues" According t
-
How To make More smiles on skype
skype emo for exmple (rock) , (Smoking) , (cat) , (durnk) (emo) (football) Chat room , Pakistani chat rooms , chat room Yahoo Chat Rooms
-
Hello, Please let me know about "Data Gaurd". I'll welcome you tto provide me any document about it. Thanks in advance Saqib
-
How to detect invalid drawable?
Hi working on a cross platform application that is over a decade old. The UI is by Qt and backend rendering is done with OpenGL. OpenGL contexts are managed in the back end, not by Qt. I have recently added error checking and reporting for all OpenGL