InlineFrame problems to show inlinframe IE 8 EI 7

I find an issue with IE 7 and IE 8 to show af:inlineFrame components in Internet Explorer 7 and Internet Explorer 8.
When,
A. I use this for Mozilla and Chrome Browser:
<af:inlineFrame source="http://192.168.1.121:7001/test/faces/faces/pages/Opciones/Solicitudes/RegistrarSolicitud.jsp"
binding="#{backingBeanScope.backing_pages_principal2.if1}"
styleClass="AFLinkIEWorkaround" shortDesc="inlineFrameContenedor"
id="if3" inlineStyle="height:auto;width:801px;" sizing="preferred" />
My pages are ok, because it shows the inlineFrame without the vertical ScrollBar and Horizontal ScrollBar.
but when
B. I use Internet Explorer 7 and Internet Explorer 8.
The inlineFrame show a Vertical ScrollBar and Horizontal ScrollBar
I was finding out, and I Found, some pages to solve this:
http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html
In this page talks about : "AFLinkIEWorkaround"
It allows to work better in IE, but it doesnt work.
Thanks in advance,

Hello,
Yes I try to use the inLineframe for autosizing the pages inside the InLineFrame Component,
But it doesnt work for IE 7 or IE8.
<af:inlineFrame source="#{backingBeanScope.backing_pages_principal2.mstrBeanSourceFrame}"
binding="#{backingBeanScope.backing_pages_principal2.if1}"
styleClass="AFStretchWidth" shortDesc="inlineFrameContenedor"
id="if3" partialTriggers="cml" inlineStyle="height:auto;" sizing="preferred" />
In this http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_inlineFrame.html page says that I have to put inLineFrame
in Strecht Component like panelStretchLayout, panelSplitter. (Geometry Managment)
But it doesnt work I can deal with it because I put the width and height in Pixels but it much better if it works with autosizing into IE 7 and IE 8.
how can I Find the Bug?
There are:
Oracle IE7 bug 8809021 ?
Oracle IE7 bug 9869651 ?
http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html
Thanks in advance,

Similar Messages

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Problem when showing MS power point files on browser.

Hi
     I wrote the code in JSP to show MS power point files on browser. And
I logged session for security as follow.
<%@ page language = "java" import="javax.servlet.*, java.util.*, java.io.*" %>
<%
     String filename = request.getParameter("fileName");
     String path = request.getParameter("path");
     session = request.getSession(true);
     if(session.isNew()) {
          response.sendRedirect("login.jsp");
     }else {
          response.setContentType ("application/vnd.ms-powerpoint");
          int iRead;
          FileInputStream stream = null;
          try {
               File f = new File(path+filename);
               stream = new FileInputStream(f);
               while ((iRead = stream.read()) != -1){
                    out.write(iRead);
               out.flush();
          }finally {
               if (stream != null) { stream.close(); }
%>
     I got problem with showing in Windows XP with MS Office XP only.
Could anyone please give me suggestion.
Thank you.
Atthapon

Hi!
I don't have Office XP. But why you don't try to use application/octet-stream instead of vnd.ms-powerpoint? It should work with it.

We have problem with showing warnings "Inline with Field"s.

We have problem with showing error messages "Inline with Field"s.
1. We have a package ERROR, that collects all errors/warnings. It has a procedure PUT, that saves errors in the variables of the package.
Package ERROR
procedure put(ptable in varchar2, pcolumn in varchar2, pcode in varchar2, pmsg in varchar2);
end;
2. We have a database table. Its values are validated by a trigger (saving business rules).
If an error occurs, then the trigger calls the procedure PUT ( to save an error message).
For example ...
CREATE TRIGGER ...
--- Rule 21
if substr(:new.ka_kood,1,1) != :new.s_kat then
error.put('TABLE1','COLUMN1', -20167, ' MESSAGE 1 !');
end if;
END;
3. I have a form of HTML DB that updates the table TABLE1
I want to show this error message with the field COLUMN1 (Inline with Field) .
I need same validations before and after updating values.
Before update - to validate same input; after update - to show errors saved in the package ERROR.
I also tried to use the global variables. For example ...
WWV_FLOW.g_validation_ids_in_error(1):= 192645056564169139;
WWV_FLOW.g_item_ids_in_error(1):= 192644674113169137 ;
WWV_FLOW.g_validation_message(1):='MESSAGE1';
And this did not help.
To rise errors in programs - is there same API ?
Or there is some other solutions ?
How can I do this in HTML DB?

Andres,
I'm not sure exactly what you are trying to do. But perhaps this will help some. If your after-submit process runs DML that causes triggers to fire, which result in error messages to be accumulated in package variables, you could create a branch on the page that would be conditional on the existence of error messages in the package variables. The branch could be back to the same page or to a more customized error page. The page you branch to would use the error messages in the package variables to determine how to format the page with the error text. The key to doing this is to run it all in the same database session. The way to do that is to use a "direct" branch, i.e., one that does not do a URL redirect. You create this type of branch with the Create Branch wizard (Branch to Page) and do not check the "Branch to page using redirect" checkbox when you see it.
Be sure to roll back any changes you do not want committed before the branch.
Using HTML DB global package variables for anything like what you described is not supported.
Scott

Problem with showing caller information on E90

I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
Regards,
-mats-

unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

Problem with showing mp3 album art in list view.

Hello.
I have litle problem with showing mp3 album artwork in list view.
In SNOW LEOPARD all work fine, and all mp3 files have album art's preview in list mode in finder.
But in LION i have only default preview mp3 icon.
Option "Show icon preview" is already on!

I have the fix!!!!
I have had the same issue ever since Lion. Its been very painful not having album art preview in finder or the play button when rollover the file for so many versions of OSX. Today I worked hard in trying to solve the problem since Applecare support hasn't helped much, all they did was tell me to bring the computer in. The other main reason I got so motivated to try and fix this is because the DJ app for Mac only reads album art from the finder even if iTunes can display the album art. The other reason that got me curious is that my friends macbook pro album art worked fine, so I cross checked with his computer until I figured out a few things that helped and ultimately fixed the issue. FINALLY!
My set up:
- I have my full iTunes library folder on my external as I have over 700GB of music.
- It includes all my database files in there, which is very important as I have many playlist settings from over 7 years of iTunes activity.
SOLUTION:
1. With every new computer I have purchased, I use to just pressed option on Mac and press iTunes to locate my folder (which I have said is located on my external drive).
2. I tried today to press option again BUT locate and selected the default library in the user/music folder of my internal drive (standard setting from Apple).
3. Miraculously, all the album art appeared in both my external drive library and also today's downloaded songs on my Macbook pro. Ofcourse with the new default location I don't have any songs or data.
4. So I tried to find a way to keep this library data on my internal drive since it can help the finder display all my files properly, yes even have the play on rollover button but as well link it back to my external drive with all my 700GB songs.
5. I then went into iTunes Preferences/Advance tab and in iTunes Media folder locationredirected the location to my external drive iTunes/ iTunes Media folder. If it asks to collate data, press NO.
6. Then I quit iTunes.
7. Next I copied the 4 files to my desktop from my external drive as I want to keep the data I have made with all my playlists etc. The four files are iTunes Library Extras.itdb ,iTunes Library Genius.itdb , iTunes Library.itl , iTunes Library.xml
8. I then went to my internal drive User/Music/Itunes/ and dragged these 4 files I copied from my external drive into here and making sure to REPLACE the four existing files already there.
9. Next open iTunes and you will find all your presettings appear with all your music linked to your external. What this does is keep the important library files on your internal drive (that somehow makes your finder files album art appear), BUT to read also all the music mp3 files located in the external drive (action from step 5)
Presto!! All your music files whether on internal drive or external all the album art has appeared.
Hope this helps!! Let me know if there are any other questions.
I am on 10.8.1 running retina macbook pro.

How do I mark question as helpful? Only "this solved my problem" is showing on the answer.

How do I mark question as helpful? Only "this solved my problem" is showing on the answer.

Yes, ONLY two "This helped me" can be clicked.
Only ONE This solved my question" can be clicked.
Message was edited by: b j t

Problem in show Arabic letters ..

There was a problem to show Arabic letters in the text, only in the Firefox version 9 ..
The problem appears when there is formation of the Arabic letters with some letters ..
Ex : Word (ألّا) appears inappropriate ..
Word appears:[http://i44.tinypic.com/2agixaw.png http://i44.tinypic.com/2agixaw.png]
While the right to appear is:
[http://i41.tinypic.com/2dui99z.png http://i41.tinypic.com/2dui99z.png]
Thank you very much ..

It is unacceptable to have this problem, even if it's specific to some fonts - other browsers and other versions of firefox have never malfunctioned like this before. It's extremely inconvenient for a great many number of users. please fix.

Problem to show a simple window when dowaloading ?

Hi
I created a pure java swing application. When run this app and when it start to download some files from server, it will take long time. I launched/new a simple JFrame window to show a simple "please waiting" message when downloading files. But only window frame show up, and no context. Actually I can see only empty frame and without any content. Only when downloading files is finished, content show up/come out. So I can not show some warning message to user when programm is downloading some files. Who can tell me what is problem?? I use Windw XP. Thanks in advance
gary

HI
I have tried to open another thread and inside another thread I new/launch my GUI class. I met same problem (only show frame and context come out after download is finished). My coding is below: Thanks
//my main class for downloading files from server
public class download(){
ShowProgress progress=new ShowProgress("waiting");
progress.start();
downloading .....
//open new thread
public class ShowProgress extends Thread {
String text;
public ShowProgress(String s) {
super(s);
text=s;
public void run(){
ShowEnd showend=new ShowEnd(text);
//GUI class to show "wait message"
public class ShowEnd extends JFrame {
BorderLayout borderLayout1 = new BorderLayout();
JPanel jPanel1 = new JPanel();
JEditorPane jEditorPane1 = new JEditorPane();
public JButton Ok = new JButton();
String text;
public ShowEnd(String s) {
super("Finished");
text=s;
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
this.getContentPane().setLayout(borderLayout1);
jEditorPane1.setBackground(Color.lightGray);
jEditorPane1.setEditable(false);
jEditorPane1.setText(text);
jEditorPane1.setPreferredSize(new Dimension(400,120));
Ok.setText("Ok");
Ok.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
Ok_actionPerformed(e);
this.getContentPane().add(jPanel1, BorderLayout.SOUTH);
jPanel1.add(Ok, null);
this.getContentPane().add(jEditorPane1, BorderLayout.CENTER);
this.pack();
this.setVisible(true);
void Ok_actionPerformed(ActionEvent e) {
System.exit(0);
}

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

I tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

i tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

pleeeeeeeeeeeeeeeeeeeeeeese I need an URGENT help,,, someone answer me back

Af:inlineFrame problem

Hi all,
I'm trying to expose remote applications in a main one using an inline frame like this:
<af:inlineFrame source="http://127.0.0.1:7101/application/faces/adf.task-flow?adf.tfId=subflow-flow&adf.tfDoc=/WEB-INF/subflow-flow.xml"
id="if1" styleClass="AFStretchWidth" sizing="preferred"/>
The sizing property is set to "preferred" in order to the inline frame grows based on its content and avoid any scroll.
The problem is that when the page showed in the inline frame grows without a full refresh, the dimensions of the inline frame remains and scrolls are displayed.
Is there any way to avoid this behavior and show all the content of the inline frame without scrolls?
I'm using JDev 11.1.1.4
Best regards,
Luis

"The preferred size is recalculated whenever the content changes."
+"Because we do not have rights to query and set DOM properties on remote pages, preferred sizing can only be set if the iframe source is served from the same domain as the page. Attempting to set preferred sizing on a foreign iframe source will result in a warning."+
http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_inlineFrame.html

InlineFrame problems to show inlinframe IE 8 EI 7

Similar Messages

Maybe you are looking for