Problem in show Arabic letters ..

There was a problem to show Arabic letters in the text, only in the Firefox version 9 ..
The problem appears when there is formation of the Arabic letters with some letters ..
Ex : Word (ألّا) appears inappropriate ..
Word appears:[http://i44.tinypic.com/2agixaw.png http://i44.tinypic.com/2agixaw.png]
While the right to appear is:
[http://i41.tinypic.com/2dui99z.png http://i41.tinypic.com/2dui99z.png]
Thank you very much ..

It is unacceptable to have this problem, even if it's specific to some fonts - other browsers and other versions of firefox have never malfunctioned like this before. It's extremely inconvenient for a great many number of users. please fix.

Similar Messages

I have problems with my mailbox; I come into my box, but it doesn`t show my letters

I had change from firefox 4 to firefox 5. Before i change it wasn`t no problems to see my letters. I can see my picture for login : user and PINkod. I fill it and I can se my box and name but no letters shows. In my other cumputer with firefox 4 can I see my letters.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

Hi, the fire fox browser shows the letters in separate when i embed the Farsi fonts in a site, while there was not such problem in the previous versions of fire fox browser. thank's

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/867506]]</blockquote>
Hi,
the fire fox browser shows the letters in separate when i embed the Farsi fonts in a site, while there was not such problem in the previous versions of fire fox browser.
good luck

The same topic exists. Try visit the link below (The problem hasn't been solved yet):
* [https://support.mozilla.com/en-US/questions/863157 Unconnected Embed Farsi Fonts]
Please continue it there...

Why in flex 4 in button/label its doesn't show hebrew letters

Hellow everyone,
I have a problem, I can not display Hebrew in Flex on Android device samsung g s2
word in text or title I can and showing hebrew letters on device, but when I want to make a button and I write in lebel something in Hebrew,
he shows me squares...
I tried everything, add fonts, change encodings ... Nothing helps ...
What else can I do...
Thanks!

Tom, I see you are an expert on the topic and I hope you, or anyone knowledgable, can help me out. as per the popular suggestion of getting rid of all things "arial" and "times new roman" to fix the safari mess-up, I actually removed every instance of these fonts (with all their possible variations, bold, italic, etc) from all locations, not just the user/lib/fonts location, but to no avail... while my Safari can properly read "some" arabic websites, it scrambles arabic up on most others, Two popular examples would be aljazeera.net and www.alarabiya.net. any help or suggestion would be greatly appreciated.....

Arabic letters in Text object

Arabic letters in Text object
I want to create a web pages which has to show the mother language the user clicks. For eg. French, German, Arabic. If a particular language is selected then all web pages should be in that language.
I want to know is it possible to make a text field object is made to enter Arabic character and is it possible to make it accept it from right to left in typing.
Can any one help me. I am not sure how browser will support it.
Thanks and Regards
Jayanthi.P.

hi
yes! if you use [ dir 'rtl' ] attribute in HTML <body> tag you can see browser page reversed.
good luck

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Problem in displaying Arabic Character in Paper Layout

Hi
I am facing problem while displaying arabic characters.
In Web layout i am able to get it by changing the character set to ISO-8259-6.
I had changed the NLS parameters in registry as suggested in the help. But still i am unable to get. Please can anyone send the brief steps to fix this.
Thanks in Advance
Ranganath

Ranganath,
That means subsetting is not happening. If subsetting had been successful, you would have seen in "Font properties", the type of font as Type 3 and name of the font as Fx, where x could be 0,1 etc.
The things I suspect are: 1) your report definition has some other font associated which is not Arial.
2) You are not specifying correctly the subset information in uifont.ali.
Open your report in builder and check again, what font you are using to display the data. Open the report in paper layout and click on the data field and check in the font box, the font name that is displayed.
In your uifont.ali, make sure that under [PDF:Subset] section, you specify (if you are using Arial font)
Arial = "arial.ttf".
If you have any other entry regarding Arial in other sections of uifont.ali, comment those for the time being by putting # before those.
Let me know the font properties after these steps.

Problem in displaying arabic

Hi
I am having a problem in displaying arabic language. The
problem is that sentences are not being displayed in correct
format. That is they are displaying in the format like left to
right languages and not in the format like right to left languages.
Someone can suggest me what is the real problem and how can i
solve it?
Regards

Hi
Even I had the same problem initially. Have you installed the
arabic fonts in your machines? I assume that you are working on a
Windows machine. My suggestion would be goto {control panel ->
Regional language and Settings -> select "Language" tab ->
select the two checkboxes in that tab}.
It will ask for the windows XP CD to install those fonts.
Once its through I hope your problem will be resolved.

HT5098 How can I read on my Apple Arabic files of Times New Roman or Arial in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the PC Windows files to my Apple?

How can I read on my Apple Arabic files of Times New Roman or Arial fonts made in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the Arabic PC Windows files to my Apple?
The same with email messages ,
And when I get Power Point files made in PC Windows, they are like PDF, not Power Point!
Anybody with a good suggestion?

Yewtree wrote:
when I get the files the Arabic letters are separate and not joined
Do not use MS Word for Mac, it does not support Arabic. Instead use Mellel, TextEdit, Nisus Writer or OpenOffice. Try the font Geeza Pro if others do not work.
What are you using to read email?
What are you using to read powerpoint?

Arabic letters are displayed as junk character in PDF preview

When we try to view (HFR Financial reports in PDF preview Arabic letters are displayed as junk character. While the same is shown correctly in HTML view.
Oracle EPMA version we are using 11.1.1.3, please provide some solution on this issue

This could help if you are connecting to essbase or planning:
1.Set the ESSLANG environment variable on the Essbase server to
ESSLANG= Arabic - Saudi Arabia (ISO)@Binary
2. In Financial Reporting, you must use the Essbase APS ADM driver rather then the Essbase Native ADM driver. Set the driver in \Hyperion\products\biplus\lib\fr_global.properties by setting the parameter
UseEssbaseEDS=1
3. In \Hyperion\products\biplus\lib\fr.env, set the ESSLANG environment variable as follows:
ESSLANG= Arabic - Saudi Arabia (ISO)@Binary
4. Re-start the Essbase and Financial Reporting services.

Problem in show Arabic letters ..

Similar Messages

Maybe you are looking for