Inner join Vs For all entries

Hi Expert,
Could you please help me in this inner join , Inner join is performance wise is not good so i want to replace instated of inner join for all entries. But when i am checking records of internal table there is difference. in inner join i am getting 11 records but for all entries i am getting 5 records .
Please help me out where excatly i have done mistake.
SELECT maralvorm maramatkl
        maramatnr marameins
        maraprdha maraspart
        marcausss marcbearz
        marcbeskz marcbstmi
        marc~wzeit
        marcdisgr marcmaabc                             *         marcdismm marcdispo
        marcdispr marcdzeit
        marcplifz marcdisls
        marcbstma marcbstrf
        marc~basmg
        marceisbe marcfevor
        marcfxhor marclvorm
        marcmatnr marcmmsta
        marcprctr marcsobsl
        marctranz marcwerks
        marc~xchar
        marclgpro marcfhori
        marc~rgekz
        mbewbklas mbewbwkey
        mbewlbkum mbewsalk3
        mbewmatnr mbewpeinh
        mbewstprs maktmaktx
        maktmatnr cepcabtei
        cepc~prctr
        marcschgt marcminbe
        marc~ekgrp
        marc~eprio
        marc~kausf
        marc~shflg
        marc~shzet
        marc~fabkz
        marc~lgrad
        marc~shpro
        marc~eislo
        marc~rwpro
        marc~lgfsb
        marczzfdwe marczzfdwi
        marczzsspe marczzsspi
INTO TABLE i_matl
FROM ( mara
      INNER JOIN marc
      ON marcmatnr = maramatnr
      INNER JOIN mbew
      ON mbewmatnr = marcmatnr
      AND mbewbwkey = marcwerks
      INNER JOIN makt
      ON maktmatnr = maramatnr
      INNER JOIN cepc
      ON cepcprctr = marcprctr
      AND cepcdatbi >= sy-datum )               "*       WHERE maralvorm IN sp$00094
        AND mara~matkl IN sp$00084
        AND mara~meins IN sp$00091
        AND mara~prdha IN sp$00066
        AND mara~spart IN sp$00085
        AND marc~disgr IN sp$00089
        AND marc~dismm IN sp$00067
        AND marc~dispo IN sp$00061
        AND marc~dispr IN sp$00083
        AND marc~fevor IN sp$00090
        AND marc~lvorm IN sp$00092
        AND marc~mmsta IN sp$00086
        AND marc~beskz IN s_beskz
        AND marc~sobsl IN sp$00068
        AND marc~werks IN sp$00062
        AND marc~xchar IN sp$00093
        AND marc~maabc IN sp$00099
        AND marc~lgrad IN s_lgrad
        AND marc~lgpro IN s_lgpro
        AND marc~rwpro IN s_rwpro
        AND marc~lgfsb IN s_lgfsb
         AND marc~schgt INs_schgt                          *         AND marc~shflg IN s_shflg
        AND marc~shzet IN s_shzet
        AND marc~fabkz IN s_fabkz
        AND marc~shpro IN s_shpro
        AND marc~eislo IN s_eislo
        AND marc~zzfdwe IN s_zzfdwe
        AND marc~zzfdwi IN s_zzfdwi
        AND marc~zzsspe IN s_zzsspe
        AND marc~zzsspi IN s_zzsspi
        AND mbew~bklas IN sp$00063
        AND mbew~lbkum IN sp$00088
        AND makt~maktx IN sp$00059
        AND makt~spras = c_en
        AND makt~matnr IN sp$00060
        AND cepc~prctr IN sp$00087.
I am using for all entries
fetching data from marc data base table
SELECT matnr werks lvorm xchar mmsta
      maabc ekgrp dispr dismm
      dispo plifz ausss disls
      beskz sobsl minbe eisbe
      bstmi bstma bstrf fhori
      rgekz fevor bearz tranz
      basmg dzeit wzeit lgrad
      prctr fxhor lgpro disgr
      kausf rwpro lgfsb schgt
      eprio shflg shzet fabkz
      shpro eislo zzfdwe zzfdwi
      zzsspe zzsspi
      FROM marc INTO TABLE i_marc
      WHERE werks IN sp$00062
          AND lvorm IN sp$00092
          AND xchar IN sp$00093
          AND mmsta IN sp$00086
          AND maabc IN sp$00099
          AND dispr IN sp$00083
          AND dismm IN sp$00067
          AND dispo IN sp$00061
          AND beskz IN s_beskz
          AND sobsl IN sp$00068
          AND fevor IN sp$00090
          AND lgrad IN s_lgrad
          AND lgpro IN s_lgpro
          AND disgr IN sp$00089
          AND rwpro IN s_rwpro
          AND lgfsb IN s_lgfsb
          AND schgt IN s_schgt
          AND shflg IN s_shflg
          AND shzet IN s_shzet
          AND fabkz IN s_fabkz
          AND shpro IN s_shpro
          AND eislo IN s_eislo
          AND zzfdwe IN s_zzfdwe
          AND zzfdwi IN s_zzfdwi
          AND zzsspe IN s_zzsspe
          AND zzsspi IN s_zzsspi.
IF sy-subrc EQ 0.
    SORT i_marc BY matnr werks.
ENDIF.
DELETE ADJACENT DUPLICATES FROM i_marc comparing matnr werks.
*fetching data from mara data base table
IF NOT i_marc[] IS INITIAL.
    SELECT matnr lvorm matkl
           meins spart prdha
        FROM mara INTO TABLE i_mara
        FOR ALL ENTRIES IN i_marc
         WHERE matnr = i_marc-matnr
         AND   lvorm IN sp$00094
         AND   matkl IN sp$00084
         AND   meins IN sp$00091
         AND   prdha IN sp$00066
         AND   spart IN sp$00085.
ENDIF.
IF sy-subrc EQ 0.
    SORT i_mara BY matnr.
ENDIF.
DELETE ADJACENT DUPLICATES FROM i_mara comparing matnr.
*fetching data from mbew data base table
IF NOT i_mara[] IS INITIAL.
    SELECT matnr bwkey bwtar lbkum
           salk3 stprs peinh bklas
           FROM mbew INTO TABLE i_mbew
           FOR ALL ENTRIES IN i_marc
           WHERE matnr = i_marc-matnr
                AND bwkey = i_marc-werks
                AND bklas IN sp$00063
                AND lbkum IN sp$00088.
ENDIF.
IF sy-subrc EQ 0.
    SORT i_mbew BY matnr bwkey bwtar.
ENDIF.
*DELETE ADJACENT DUPLICATES FROM i_mbew comparing matnr bwkey bwtar.
*fetching data from makt data base table
IF NOT i_mara[] IS INITIAL.
    SELECT matnr spras maktx
      FROM makt INTO TABLE i_makt
      FOR ALL ENTRIES IN i_mara
      WHERE matnr = i_mara-matnr
       AND maktx IN sp$00059
       AND makt~spras = c_en.
ENDIF.
IF sy-subrc EQ 0.
    SORT i_makt BY matnr spras.
ENDIF.
DELETE ADJACENT DUPLICATES FROM i_makt.
*fetching data from cpec data base table
IF NOT i_marc[] IS INITIAL.
    SELECT prctr datbi kokrs abtei
        FROM cepc INTO TABLE i_cepc
        FOR ALL ENTRIES IN i_marc
        WHERE prctr = i_marc-prctr
             AND prctr IN sp$00087
             AND datbi >= sy-datum.
ENDIF.
IF sy-subrc EQ 0.
    SORT i_cepc BY prctr datbi kokrs.
ENDIF.
*DELETE ADJACENT DUPLICATES FROM i_cepc.
LOOP AT i_cepc INTO wa_cpec.
read table i_marc into wa_marc with key
                   prctr = wa_cpec-prctr binary search.
   if sy-subrc = 0.
    i_matl-abtei = wa_cpec-abtei.
    i_matl-prctr1 = wa_cpec-prctr.
    i_matl-ausss = wa_marc-ausss.
    i_matl-bearz = wa_marc-bearz.
    i_matl-beskz = wa_marc-beskz.
    i_matl-bstmi = wa_marc-bstmi.
    i_matl-wzeit = wa_marc-wzeit.
    i_matl-disgr = wa_marc-disgr.
    i_matl-maabc = wa_marc-maabc.
    i_matl-dismm = wa_marc-dismm.
    i_matl-dispo = wa_marc-dispo.
    i_matl-dispr = wa_marc-dispr.
    i_matl-dzeit = wa_marc-dzeit.
    i_matl-plifz = wa_marc-plifz.
    i_matl-disls = wa_marc-disls.
    i_matl-bstma = wa_marc-bstma.
    i_matl-bstrf = wa_marc-bstrf.
    i_matl-basmg = wa_marc-basmg.
    i_matl-eisbe = wa_marc-eisbe.
    i_matl-fevor = wa_marc-fevor.
    i_matl-fxhor = wa_marc-fxhor.
    i_matl-lvorm1 = wa_marc-fevor.
    i_matl-matnr1 = wa_marc-matnr.
    i_matl-mmsta = wa_marc-mmsta.
    i_matl-prctr = wa_marc-prctr.
    i_matl-sobsl = wa_marc-sobsl.
    i_matl-tranz = wa_marc-tranz.
    i_matl-werks = wa_marc-werks.
    i_matl-xchar = wa_marc-xchar.
    i_matl-lgpro = wa_marc-lgpro.
    i_matl-fhori = wa_marc-fhori.
    i_matl-rgekz = wa_marc-rgekz.
    i_matl-schgt = wa_marc-schgt.
    i_matl-minbe = wa_marc-minbe.
    i_matl-ekgrp = wa_marc-ekgrp.
    i_matl-eprio = wa_marc-eprio.
    i_matl-kausf = wa_marc-kausf.
    i_matl-shflg = wa_marc-shflg.
    i_matl-shzet = wa_marc-shzet.
    i_matl-fabkz = wa_marc-fabkz.
    i_matl-lgrad = wa_marc-lgrad.
    i_matl-shpro = wa_marc-shpro.
    i_matl-eislo = wa_marc-eislo.
    i_matl-rwpro = wa_marc-rwpro.
    i_matl-lgfsb = wa_marc-lgfsb.
    i_matl-zzfdwe = wa_marc-zzfdwe.
    i_matl-zzfdwi = wa_marc-zzfdwi.
    i_matl-zzsspe = wa_marc-zzsspe.
    i_matl-zzsspi = wa_marc-zzsspi.
endif.
    READ TABLE i_mara INTO wa_mara WITH KEY
                        matnr = wa_marc-matnr binary search.
    i_matl-lvorm = wa_mara-lvorm.
    i_matl-matkl = wa_mara-matkl.
    i_matl-matnr = wa_mara-matnr.
    i_matl-meins = wa_mara-meins.
    i_matl-prdha = wa_mara-prdha.
    i_matl-spart = wa_mara-spart.
    READ TABLE i_makt INTO wa_makt WITH KEY
                        matnr = wa_mara-matnr binary search.
    i_matl-matnr3 = wa_makt-matnr.
    i_matl-maktx = wa_makt-maktx.
    READ TABLE i_mbew INTO wa_mbew WITH KEY
                          matnr = wa_marc-matnr binary search.
    i_matl-bklas = wa_mbew-bklas.
    i_matl-bwkey = wa_mbew-bwkey.
    i_matl-lbkum = wa_mbew-lbkum.
    i_matl-salk3 = wa_mbew-salk3.
    i_matl-matnr2 = wa_mbew-matnr.
    i_matl-peinh = wa_mbew-peinh.
    i_matl-stprs = wa_mbew-stprs.
   READ TABLE i_cepc INTO wa_cpec WITH KEY
                         prctr = wa_marc-prctr.
    APPEND i_matl.
    CLEAR: wa_cpec, wa_mbew, wa_mara, wa_marc.
ENDLOOP.
Thaks
Waiting your reply.

Hi Sasmita,
I think your final loop is the problem. As you are looping through the CEPC internal table, and reading the other tables. For different materials there might be a same profit center, the read table will fetch you only first occurance of the profit center from the mara or marc table.
So loop through either mara or marc table and read the remaining and populate your final internal tables. This might solve your problem.
Regards,
Ramesh Babu S
*Reward points if it is helpful....

Similar Messages

INNER JOIN with FOR ALL ENTRIES IN Performance ?

I am using following the following Select using Inner join with For All Entries in.
 SELECT kebeln kebelp kvbeln kvbelp
 FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
 AND kebelp = bebelp
 INTO TABLE gi_purchase
 FOR ALL ENTRIES
 IN gi_sales
 WHERE k~mandt EQ sy-mandt
 AND k~vbeln EQ gi_sales-vbeln
 AND k~vbelp EQ gi_sales-posnr
 AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
I want to know which one has better performance
Inner join with for all entries in
 or
2 Selects with for all entries in

the join is almost aways faster:
<a href="/people/rob.burbank/blog/2007/03/19/joins-vs-for-all-entries--which-performs-better">JOINS vs. FOR ALL ENTRIES - Which Performs Better?</a>
<a href="http://blogs.ittoolbox.com/sap/db2/archives/for-all-entries-vs-db2-join-8912">FOR ALL ENTRIES vs DB2 JOIN</a>
Rob

Inner Join with For All Entries - Performance ?

I am using following the following Select using Inner join with For All Entries in.
 SELECT kebeln kebelp kvbeln kvbelp
 FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
 AND kebelp = bebelp
 INTO TABLE gi_purchase
 FOR ALL ENTRIES
 IN gi_sales
 WHERE k~mandt EQ sy-mandt
 AND k~vbeln EQ gi_sales-vbeln
 AND k~vbelp EQ gi_sales-posnr
 AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
I want to know which one has better performance
Inner join with for all entries in
 or
2 Selects with for all entries in

An Inner Join with for all entries should be done if you add this....
IF NOT gi_sales[] IS INITIAL.
SELECT k~ebeln k~ebelp k~vbeln k~vbelp
FROM ekkn AS k INNER JOIN ekbe AS b ON k~ebeln = b~ebeln
AND k~ebelp = b~ebelp
INTO TABLE gi_purchase
FOR ALL ENTRIES
IN gi_sales
WHERE k~mandt EQ sy-mandt
AND k~vbeln EQ gi_sales-vbeln
AND k~vbelp EQ gi_sales-posnr
AND b~budat EQ p_date.
ENDIF.
Also, while you use an index or the complete key for the SELECT, your not going to suffer from lack of performance -;)
Greetings,
Blag.

Inner joins Vs for all entries

Hi All,
Pls let me know
the differences b/w innerjoins and for all entries,,,,which is the best option and Y??
Thanks in Advance,
Bye

Hi!
INNER JOIN is used if we want to retrieve some data from more than one table.
FOR ALL ENTRIES is used if we want some data from a table based on some conditions of some other table.
Using several nested INNER JOIN statements can be inefficient and cause time out if the tables become too big in the future."
In ABAP, these joins are first split by the ABAP processor and then sent to the database, with the increase in DATA in production system, these joins tend to give way if your database keeps growing larger and larger.
You should rather use "FOR ALL ENTRIES IN" (Tabular conditions), which is a much efficient way as far as performance is concerned.
Check these links:
inner joins and for all entries
inner join and for all entries
Reward points if it helps.
Regards
Sudheer

Coupling INNER JOIN with FOR ALL ENTRIES statement

Hi All,
 I am coupling INNER JOIN with FOR ALL ENTRIES statement .....
 Would you please highlight its implications ?? Is it a best practise ?
 Is it advicable to use MULTIPLE INNER JOINs with a FOR ALL ENTRIES ???
 SORT itab BY matnr.
 IF NOT itab[] IS INITIAL.
 SELECT epmatnr epebeln ep~ebelp
 epwerks epmenge ep~netpr
 ekps_psp_pnr ebbelnr eb~menge
 INTO TABLE iekpo
 FROM ekpo AS ep
 INNER JOIN ekkn AS ek
 ON ekebeln = epebeln
 AND ekebelp = epebelp
 INNER JOIN ekbe AS eb
 ON ebebeln = epebeln
 AND ebebelp = epebelp
 AND eb~bwart = '101'
 FOR ALL ENTRIES IN itab
 WHERE ep~matnr = itab-matnr.
 IF sy-subrc EQ 0.
 SORT iekpo BY matnr werks.
 LOOP AT itab ASSIGNING <itab>.
 READ TABLE iekpo WITH KEY matnr = <itab>-matnr
 werks = <itab>-werks
 BINARY SEARCH.
 IF sy-subrc EQ 0.
 MOVE iekpo-matnr TO itab1-matnr.
 MOVE iekpo-ebeln TO itab1-ebeln.
 MOVE iekpo-ebelp TO itab1-ebelp.
 MOVE iekpo-netpr TO itab1-poprice.
 MOVE iekpo-werks TO itab1-werks.
 MOVE iekpo-menge TO itab1-menge1.
 MOVE iekpo-menge1 TO itab1-menge2.
 MOVE iekpo-belnr TO itab1-belnr.
 MOVE iekpo-ps_psp_pnr TO itab1-pspel.
 MOVE <itab>-pspel TO itab1-tpspel.
 MOVE <itab>-sobkz TO itab1-sobkz.
 MOVE <itab>-fo_qty TO itab1-fo_qty.
 MOVE <itab>-schgt TO itab1-schgt.
 MOVE <itab>-postp TO itab1-postp.
 MOVE <itab>-beskz TO itab1-beskz.
 pend_qty = iekpo-menge1 - iekpo-menge2.
 MOVE pend_qty TO itab1-pending.
 APPEND itab1.
 pend_qty = 0.
 ENDIF.
 ENDLOOP.
 ENDIF.
 ENDIF.
ENDIF.
Regards
Jaman
Edited by: ABAP Techie on Sep 15, 2008 12:39 PM
Edited by: ABAP Techie on Sep 15, 2008 12:41 PM

best practise ... don't know ... it is allowed and o.k.
If possible you should of coourse to have no FOR ALL ENTRIES at all !
Joins, there is no general rule, check indexes etc.
The first SORT, I don't that it help for anything, use it together with the delete adjacent duplicates if you expect duplicates in the driver table.
o.k., it can help, if there is a loop afterwards and an append inside, because the new table itab1 is then sorted.
Siegfried

Inner Joins vs For All Entries - performance query

Hi All,
I'm a bit confused here... I see lots and lots (and lots...) of postings from people asking how to get data from multiple tables.
To me the immediate answer is to use joins in my select statement to reduce the database load but more and more I see people suggesting FOR ALL ENTRIES is better from a performance perspective.
Now, simple question time, which is more efficient in the real world when doing something like the following:- (this is a basic example but I'm sure you know what I mean.)
Select *
into table lt_sales_data
from vbap as vbap
inner join vbak as vbak
     on vbak~vbeln eq vbap~vbeln
where vbak~vbeln in so_vbeln.
or
Select *
into table lt_vbak_data
from vbak
where vbeln in so_vbeln.
if lt_vbak_data[] is not initial.
select *
into table lt_vbap_data
from vbap
for all entries in lt_vbak_data
where vbeln eq lt_vbak_data-vbeln.
endif.
Basically I want to know whether joins or for all entries is better from a database performance perspective.
I want to know why as well so please don't just post links, random cut and paste answers or one liners. I'm convinced for all entries is slower but am willing to be persuaded otherwise if someone can show me proof.
Thanks,
Gareth.

Thanks to all the opinions so far... You've backed up what I suspected although I maybe wasn't clear enough with my question and desired result. I was hoping someone could produce some hard and fast guidelines from SAP themselves dictating which is the better method. I know 10 years ago I was taught to use joins and to keep my database access to minimal levels, using keyed reads where applicable and using internal tables to filter data where I couldn't use key fields.
Gautham, I am aware of SM30 but that doesn't answer the general question I was asking. I've obviously used SM30 to run some comparisons but I was really hoping someone could give me a definitive answer based on hard facts or from attending some training at SAP recently. And no points for asking for them
Tamás, I agree with what you are saying about runing many comparisons - it appears to be dependant on any number of criteria which means each case may require different code. I've not managed to find a consistent comparison of the two methods that would lead me to use one method or the other...
Karan, thanks for your feelings but it doesn't really help me! Why/how does it retrieve the data faster than a join? Have you got testing/proof to back this up?
Raam, thanks for those links - they are interesting reads and seem to go through the same arguments I'm currently considering. Although I still don't have a definitie answer!
Amit, I understand exactly what yuo are saying about myths and urban legends That was my motivation for this post. To bo honest, it seems to me that a lot of the "newer" ABAP coders always go for FOR ALL ENTRIES but I wanted to know - is there a reason or do they all just cut and paste off SDN?! Are they all just scared of complex inner joins?! What would you all make of this Select statement for example? -
select afvc~arbid
            afko~aufnr
            aufk~objnr
            afko~plnnr
            afko~plnal
            afko~aufpl
            afko~zaehl
            afpo~matnr
            makt~maktx
            afvc~vornr
            afvc~ltxa1
            afvu~aplzl
            afvu~usr10
            afvv~meinh
            afvv~bmsch
            afvv~vge02
            afvv~vgw02
            afvv~mgvrg
            afab~aplzl_vor
      into table lt_recipe_orders
      from afko as afko
     inner join aufk as aufk
        on aufk~aufnr eq afko~aufnr
     inner join afpo as afpo
        on afpo~aufnr eq afko~aufnr
     inner join makt as makt
        on makt~matnr eq afpo~matnr
     inner join afvc as afvc
        on afvc~aufpl eq afko~aufpl
     inner join afvu as afvu
        on afvu~aufpl eq afvc~aufpl
       and afvu~aplzl eq afvc~aplzl
     inner join afvv as afvv
        on afvv~aufpl eq afvu~aufpl
       and afvv~aplzl eq afvu~aplzl
      left outer join afab as afab
        on afab~aufpl_nch eq afvu~aufpl
       and afab~aplzl_nch eq afvu~aplzl
       for all entries in t_resources
     where afko~gltrs ge v_start_date
       and afko~gstrs le v_start_date
       and afko~plnty eq gc_task_list_type_2
       and afpo~dwerk eq v_werks
       and makt~spras eq sy-langu
       and afvc~arbid eq t_resources-objid.
Twinkal, I've always thought less DB hits is a better performing program too - the above example compares 2 db hits to 1... I don't have issues with complex joins because I've used them so long so can discount that problem but do agree that less DB hits is the ultimate goal. Providing of course the Selects you write are actually efficient in themselves.
Murthy, if you build your select statement correctly duplicate records can be avoided in most cases. How can you say a join statement will hit the database more when in my example there is 1 DB hit compared to 2 for a for all entries? And I'd love to know the reasoning behind never using a join on more than 2 tables?! Is that just an urban myth?!
Thomas, I've just been looking at some of Siegfried's posts and like what I am reading. As you say, using full keys via joins is essential.
Gareth.

Replacing a inner join with for all entries

Hi Team,
   In a already developed program I am replacing a inner join with select query follow up with for-all-entris and passing the data to final internal table but in both the case the result should be same then only my replacement will be correct. But my no records in both cases differs. This happening because when i am selecting data from first data base table is 32 lines. then I am doing fo-all-entries moving all the duplicate entries then the no records are four. but in final internal table i am looping the first internal table. So in final internal table the no of records are 32. But in inner join query the records are 16.So please let me know how resolve this issue?
Thanks and REgards
Deepa

Hi Thomas,
Thanks for ur suggestion.
The solved that in below.
In select query I did not change anything The way I had written the code was correct.
I think many of us know how to write that how to make the performance better in that way.
I made the change when I transfered the to final internal table.
The original Inner join code:
select a~field1 a~field2 a~field3 b~field2 b~field3 b~field4
           from dbtab1 as a inner join dbtab2 as b
          on a~field1 = b~field1 into it_final where
          a~field1 in s_field1. [Field1 in both the table are key field]
Before code:
Sort itab1 by key-fields.
sort itab2 by keyfields.
loop at itab1 into wa1.
move: wa1-field1 to wa_final-field1,
           wa1-field2 to wa_final-field2,
           wa1-field3 to wa_final-field3.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move : wa2-field2 to wa_final-field4,
             wa2-field3 to wa_final-field5,
             wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case if the one key fieild value is not present there in second internal table but its there in first internal table still it will read that row with 2nd internal values having zeroes. Normally what does not happen in inner join case if the key field value will same in both the case ,then that will fetch only those rows.
Changed Code
loop at itab1 into wa1.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move: wa1-field1 to wa_final-field1,
           wa1-field2 to wa_final-field2,
           wa1-field3 to wa_final-field3.
move : wa2-field2 to wa_final-field4,
             wa2-field3 to wa_final-field5,
             wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case the values will read to final internal table if both key field matches.
With Regards
Deepa

Inner join with for-all entries

Why is the below inner join-for all entries does not result in expected output ?
REPORT ZTST3                                   .
tables : ztst1,ztst2 .
* table ztst1 has 4 fields : mandt,ebeln,ebelp,etenr,char4. ; ztst2 has
* 3 fields : mandt,ebeln,ebelp,matnr
*Entries in ztst1
* EBELN       EBELP   ETERN CHAR4
* 5000000000 00010    0001    abc
* 5000000000 00010    0002    cbd
* 5000000000 00010    0003    efg
*Entries in ztst2
* EBELN       EBELP   matnr
* 5000000000 00010    matabc
*expected itab after inner join
* EBELN       EBELP   CHAR4 MAtnr
* 5000000000 00010   abc    matabc
* 5000000000 00010   cbd    matabc
* 5000000000 00010   efg    matabc
data : begin of itab1 occurs 0,
       ebeln type ebeln,
       ebelp type ebelp,
       end of itab1.
data : begin of itab occurs 0,
       ebeln type ebeln,
       ebelp type ebelp,
       char4 type char4,
       matnr type matnr,
       end of itab.
start-of-selection.
itab1-ebeln = '5000000000'.
itab1-ebelp = '00010'.
append itab1.
select ztst1~ebeln
       ztst1~ebelp
       ztst1~char4
       ztst2~matnr into corresponding fields of table itab
from ztst1 inner join ztst2
on ztst1~ebeln = ztst2~ebeln and
   ztst1~ebeln = ztst2~ebelp
for all entries in itab1
where
ztst1~ebeln eq itab1-ebeln and
ztst1~ebelp eq itab1-ebelp .
* why does it return no entries;
break-point.

For example in the bellow case
*Entries in ztst1
EBELN       EBELP   ETERN CHAR4
5000000000 00010    0001    abc
5000000000 00010    0002    cbd
5000000000 00010    0003    efg
5000000002 00020    0003    efg
5000000002 00020    0003    efg
*Entries in ztst2
EBELN       EBELP   matnr
5000000000 00010    matabc
5000000002 00020    abc
may it will return you 2 records yes, than I think you have under stand the working of u201Cfor all entriesu201D ?
And the following case I think it will work fine.
*Entries in ztst1
key EBELN       EBELP   ETERN CHAR4
1       5000000000 00010    0001    abc
2       5000000000 00010    0002    cbd
3       5000000000 00010    0003    efg
4       5000000002 00020    0003    efg
5       5000000002 00020    0003    efg
*Entries in ztst2
EBELN       EBELP   matnr
5000000000 00010    matabc
5000000002 00020    abc
select ztst1~key
ztst1~ebeln
       ztst1~ebelp
       ztst1~char4
       ztst2~matnr into corresponding fields of table itab
from ztst1 inner join ztst2
on ztst1~ebeln = ztst2~ebeln and
   ztst1~ebelp = ztst2~ebelp
for all entries in itab1
where
ztst1~ebeln eq itab1-ebeln and
ztst1~ebelp eq itab1-ebelp .
Sorry, I donu2019t have system with me right now and I am sending you with out testing but I am sure that it is working the same way.
Please Reply if any problem
Kind Regards,
Faisal

Can we use inner joins with for all entries?

Hi,
    Can we use innerjoin on two tables MARA and MAKT against the materials in
    the internal table.
    If so ,please let me know whether there is performance issue.Because if there is
    bad performance issue or something else like thise means,my project manager
    wont allow to include.
    So can one let me know about this.
Thanks,
Balaji

Hi Arunkumar,
                           I think you are not clear.My question is can I use innerjoin with
for all entries.For example below is my code.
SELECT A~MATNR
         B~MAKTX
         A~MTART
         A~MATKL
         FROM MARA AS A INNER JOIN MAKT AS B
         ON AMATNR = BMATNR
         INTO TABLE IT_MARA_MAKT
         FOR ALL ENTRIES IN IT_MATNR
         WHERE A~MATNR = IT_MATNR-MATNR
         AND   A~EXTWG = P_EXTWG
         AND   A~SPART = P_SPART.
Can we use like this for all entries along with innerjoins.
Thanks,
Balaji

Plz change code from inner join to for all entries

REPORT : ZSD00009 *
DESCRIPTION : REPORT FOR TRACTOR ON STOCK AGING *
CODED BY : DINESH AGARWAL *
SPECS BY : AJAY KOTHI *
START DATE : 07TH JUNE , 2000 *
CHANGED : MANOJ SINGH 01/02/2001 *
CHANGED : YOGINDER KAURA 27TH JULY 2001 *
REPORT ZMUSA_SD00009 .
TABLES : vbrk,vbrp,vbfa,ser01,objk,knvv,mara,mbew, t005u,
 t171t,kna1,equi,ihpa, cabn, ausp.
DATA : BEGIN OF itab OCCURS 0,
 bzirk1 LIKE vbrk-bzirk,
 bzirk LIKE KNA1-regio, "added by dhiraj - 23.11.2007
 LAND1 LIKE KNA1-LAND1,
 kunde LIKE equi-kunde,
 vbeln LIKE vbrk-vbeln,
 fkdat LIKE vbrk-fkdat,
 matkl LIKE mara-matkl,
 sernr LIKE objk-sernr,
 equnr LIKE objk-equnr ,
 matnr LIKE vbrp-matnr,
 spart LIKE vbrp-spart,
 vbelv LIKE vbrp-vbelv,
 posnv LIKE vbrp-posnv,
 days1(1) TYPE n ,
 days2(1) TYPE n ,
 days3(1) TYPE n ,
 days4(1) TYPE n ,
 days5(1) TYPE n ,
 werks like vbrp-werks,
 END OF itab.
DATA : BEGIN OF itab_grp OCCURS 0,
 werks like vbrp-werks,
 matkl LIKE mara-matkl,
 bzirk1 LIKE vbrk-bzirk,
 bzirk LIKE KNA1-regio, "added by dhiraj - 23.11.2007
 kunde LIKE equi-kunde,
 vbeln LIKE vbrk-vbeln,
 fkdat LIKE vbrk-fkdat,
 sernr LIKE objk-sernr,
 equnr LIKE objk-equnr ,
 matnr LIKE vbrp-matnr,
 spart LIKE vbrp-spart,
 vbelv LIKE vbrp-vbelv,
 posnv LIKE vbrp-posnv,
 days1(1) TYPE n ,
 days2(1) TYPE n ,
 days3(1) TYPE n ,
 days4(1) TYPE n ,
 days5(1) TYPE n ,
 END OF itab_grp.
DATA : BEGIN OF dealer ,
 days1(3) TYPE p ,
 days2(3) TYPE p ,
 days3(3) TYPE p ,
 days4(3) TYPE p ,
 days5(3) TYPE p ,
 END OF dealer .
DATA : state LIKE dealer .
DATA : matgr LIKE dealer .
DATA : plant LIKE dealer .
DATA : BEGIN OF us,
 days1(4) TYPE p ,
 days2(4) TYPE p ,
 days3(4) TYPE p ,
 days4(4) TYPE p ,
 days5(4) TYPE p ,
 END OF us .
DATA : lin TYPE i , check_box(1) ,
 dealer_total TYPE i,state_total TYPE i,
 matgr_total TYPE i,plant_total TYPE i,
 us_total TYPE i .
DATA vobjnr(22) .
DATA no_of_days TYPE i .
DATA flag_fkdat.
DATA atinn1 LIKE cabn-atinn.
DATA atinn LIKE cabn-atinn.
DATA : atflv LIKE ausp-atflv.
DATA : atflv1(8) TYPE n.
DATA : invdate TYPE sy-datum.
DATA invoicenum(10) TYPE n .
DATA : BEGIN OF it_regio OCCURS 0,
 regio LIKE kna1-regio,
 END OF it_regio.
data : it001w like table of t001w with header line.
TABLES vbpa.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : werks FOR vbrp-werks,
 vkorg FOR vbrk-vkorg,
 vtweg FOR vbrk-vtweg,
 spart FOR vbrp-spart.
SELECTION-SCREEN END OF BLOCK block1 .
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
SELECT-OPTIONS : matkl FOR mara-matkl,
 bzirk FOR vbrk-regio," changed by dhiraj - 23.11.2007
 kunrg FOR vbrk-kunrg ,
 fkdat FOR vbrk-fkdat.
SELECTION-SCREEN END OF BLOCK block2 .
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-003.
PARAMETERS : days1(2) TYPE p OBLIGATORY DEFAULT '90' ,
 days2(2) TYPE p OBLIGATORY DEFAULT '90',
 days3(2) TYPE p OBLIGATORY DEFAULT '180',
 days4(2) TYPE p OBLIGATORY DEFAULT '270',
 days5(2) TYPE p OBLIGATORY DEFAULT '365'.
SELECTION-SCREEN END OF BLOCK block3 .
SELECTION-SCREEN BEGIN OF BLOCK reptype WITH FRAME TITLE text-201 .
PARAMETERS : detail RADIOBUTTON GROUP rep ,
 summary RADIOBUTTON GROUP rep ,
 grp_summ RADIOBUTTON GROUP rep .
SELECTION-SCREEN END OF BLOCK reptype .
*start of code by Kalpana for Authority check for REGIO */
AT SELECTION-SCREEN .
SELECT regio FROM kna1 INTO TABLE it_regio
 WHERE regio IN bzirk
 AND kunnr IN kunrg.
CLEAR it_regio.
LOOP AT it_regio.
 AUTHORITY-CHECK OBJECT 'Z:AO_REGIO'
 ID 'REGIO' FIELD it_regio.
 IF sy-subrc NE 0.
 MESSAGE e173(zma) WITH it_regio.
 ENDIF.
ENDLOOP.
*End of code by Kalpana for Authority check for REGIO */
IF days1 NE days2 .
 MESSAGE e000(8i) WITH text-004 text-009 text-005.
ELSEIF days3 LE days2 .
 MESSAGE e000(8i) WITH text-006 text-010 text-005 .
ELSEIF days4 LE days3 .
 MESSAGE e000(8i) WITH text-007 text-010 text-006 .
ELSEIF days5 LE days4 .
 MESSAGE e000(8i) WITH text-008 text-010 text-007 .
ENDIF .
START-OF-SELECTION .
select abzirk akunrg avbeln afkdat b~matnr
 cmatkl dvbelv dposnv fsernr f~equnr
into corresponding fields of table itab
from ( ( ( ( ( vbrk as a inner join vbrp as b
 on avbeln = bvbeln )
 inner join mara as c on cmatnr = bmatnr )
 inner join vbfa as d on dvbeln = bvbeln
 and dposnn = bposnr )
 inner join ser01 as e on elief_nr = dvbelv
 and eposnr = dposnv )
 inner join objk as f on fobknr = eobknr )
 where a~vkorg in vkorg
 and a~vtweg in vtweg
 and a~bzirk in bzirk
 and a~fkdat in fkdat
 and c~matkl in matkl
 and a~kunrg in kunrg
 and b~spart in spart
 and c~mtart = 'FERT'
 and d~vbtyp_n = 'M'
 and a~vbtyp = 'M'
 and a~fksto = ' '
 and b~vgtyp = 'J' .
REFRESH itab.
CLEAR itab .
CLEAR cabn .
select * from t001w into table it001w where werks in werks.
SELECT SINGLE atinn INTO atinn1 FROM cabn
 WHERE atnam = 'INVOICEDATE'.
*************************modified by dhiraj - 23.11.2007*****************
SELECT kbzirk aatflv ekunde eequnr esernr ematnr m~matkl
 INTO CORRESPONDING FIELDS OF itab
 FROM ( ( ( equi AS e INNER JOIN ausp AS a
 ON eequnr = aobjek )
 INNER JOIN mara AS m ON ematnr = mmatnr )
 INNER JOIN knvv AS k ON kkunnr = ekunde
 AND kspart = mspart )
 WHERE m~mtart = 'FERT'
 AND m~spart IN spart
 AND m~matkl IN matkl
 AND e~kunde <> ' '
 AND e~kunde IN kunrg
 AND k~bzirk IN bzirk
 and a~atinn = atinn1
 AND k~vkorg = 'M001'
 AND k~vtweg = '90'.
SELECT kbzirk nregio nland1 aatflv ekunde eequnr esernr ematnr m~matkl
 INTO CORRESPONDING FIELDS OF itab
 FROM ( ( ( ( equi AS e INNER JOIN ausp AS a
 ON eequnr = aobjek )
 INNER JOIN mara AS m ON ematnr = mmatnr )
 INNER JOIN knvv AS k ON kkunnr = ekunde
 AND kspart = mspart )
 INNER JOIN kna1 as n ON nkunnr = kkunnr )
 WHERE m~mtart = 'FERT'
 AND m~spart IN spart
 AND m~matkl IN matkl
 AND e~kunde <> ' '
 AND e~kunde IN kunrg
 AND nregio IN bzirk "k-bzirk changed to nregio by dhiraj-23.11.2007
 and a~atinn = atinn1
 AND k~vkorg = 'F041'
 AND k~vtweg = '01'.
 added by krunal for plant as select-option
 clear ausp.
 select single * from cabn where atnam = 'DELIVERINGPLANT'.
 SELECT SINGLE * FROM ausp
 WHERE objek = itab-equnr
 AND atinn = CABN-ATINN.
 CLEAR CABN.
 read table it001w with key werks = ausp-atwrt.
 if sy-subrc <> 0.
 continue.
 else.
 itab-werks = ausp-atwrt.
 endif.
*end addition
 CLEAR : ausp, knvv .
 SELECT SINGLE * FROM ausp
 WHERE objek = itab-equnr
 AND atinn = atinn1 .
 MOVE ausp-atflv TO atflv1 .
 MOVE atflv1 TO invdate .
 MOVE invdate TO itab-fkdat.
 CLEAR : cabn, ausp, atinn.
 SELECT SINGLE atinn INTO atinn FROM cabn
 WHERE atnam = 'INVOICENO' .
 SELECT SINGLE * FROM ausp
 WHERE objek = itab-equnr
 AND atinn = atinn.
 MOVE ausp-atflv TO invoicenum .
 MOVE invoicenum TO itab-vbeln.
 IF NOT fkdat-low IS INITIAL .
 IF invdate GE fkdat-low AND invdate LE fkdat-high .
 APPEND itab.
 ELSE.
 CONTINUE.
 ENDIF.
 ELSE.
 APPEND itab.
 ENDIF.
ENDSELECT.
SORT itab BY sernr matnr .
DELETE ADJACENT DUPLICATES FROM itab COMPARING sernr matnr .
SORT itab BY equnr .
LOOP AT itab .
 CONCATENATE 'IE' itab-equnr INTO vobjnr .
 SELECT SINGLE * FROM ihpa WHERE objnr = vobjnr
 AND parvw = 'RE'
 AND obtyp = 'IEQ'
 AND kzloesch EQ space. " Yogi on 27/06/2001
 IF sy-subrc EQ 0 .
 DELETE itab INDEX sy-tabix .
 CONTINUE .
 ELSE .
 no_of_days = sy-datum - itab-fkdat .
 IF no_of_days LE days1 .
 itab-days1 = 1 .
 ELSEIF no_of_days GT days2 AND no_of_days LE days3.
 itab-days2 = 1 .
 ELSEIF no_of_days GT days3 AND no_of_days LE days4.
 itab-days3 = 1 .
 ELSEIF no_of_days GT days4 AND no_of_days LE days5.
 itab-days4 = 1 .
 ELSEIF no_of_days GT days5 .
 itab-days5 = 1 .
 ENDIF .
 MODIFY itab INDEX sy-tabix .
 ENDIF .
ENDLOOP .
END-OF-SELECTION .
DESCRIBE TABLE itab LINES lin .
IF lin GT 0 .
 SORT itab BY bzirk kunde vbeln .
 IF detail = 'X' .
 PERFORM disp_list .
 ELSEIF summary = 'X' .
 PERFORM summary_list .
 ELSEIF grp_summ = 'X' .
 PERFORM grp_summ_list .
 ENDIF.
ELSE .
MESSAGE i000(8i) WITH 'No Records exist as per Selection Condititon' .
ENDIF .
TOP-OF-PAGE .
WRITE : / text-011 , ' - ' , sy-datum .
*& Form DISP_LIST
 text
--> p1 text
<-- p2 text
FORM disp_list.
LOOP AT itab.
********changes made by dhiraj - 23.11.2007********************
 AT NEW bzirk.
 SKIP .
 SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
 AND spras = 'E' .
 SELECT SINGLE * FROM t005u WHERE spras = sy-langu
 AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
 PERFORM list_heading.
 FORMAT COLOR 4 INTENSIFIED ON.
 WRITE :/ 'Sales Region : ',itab-bzirk,30 t005u-BEZEI
 ,81 ''.
 ULINE .
 ENDAT.
 AT NEW kunde.
 SELECT SINGLE * FROM kna1 WHERE kunnr = itab-kunde .
 FORMAT COLOR 3 INTENSIFIED ON.
 WRITE :/ 'Dealer : ',itab-kunde,30(25) kna1-name1,
 60 'City : ' ,kna1-ort01, 81 ''.
 ULINE .
 ENDAT.
 AT NEW fkdat .
 FORMAT COLOR OFF INTENSIFIED OFF .
 WRITE : /5 itab-vbeln,
 20 itab-fkdat .
 CLEAR flag_fkdat .
 ENDAT .
 at new matkl .
 format color 2 intensified on.
 write :/ 'Material Group : ',itab-matkl, 81 ''.
 skip .
 endat .
 mcnt = mcnt + 1 .
 dealer-days1 = dealer-days1 + itab-days1 .
 dealer-days2 = dealer-days2 + itab-days2 .
 dealer-days3 = dealer-days3 + itab-days3 .
 dealer-days4 = dealer-days4 + itab-days4 .
 dealer-days5 = dealer-days5 + itab-days5 .
 state-days1 = state-days1 + itab-days1 .
 state-days2 = state-days2 + itab-days2 .
 state-days3 = state-days3 + itab-days3 .
 state-days4 = state-days4 + itab-days4 .
 state-days5 = state-days5 + itab-days5 .
 IF flag_fkdat EQ 'Y' .
 NEW-LINE .
 ENDIF .
 WRITE : 35 itab-matnr, "krunal
 55 itab-sernr,
 72 itab-werks, "krunal
 83 itab-days1 ,
 93 itab-days2 ,
 103 itab-days3 ,
 113 itab-days4 ,
 123 itab-days5 .
 PERFORM get_musa_ta.
 flag_fkdat = 'Y' .
 at end of matkl .
 skip .
 format color 2 intensified on.
 write :/ 'Total For : ',itab-matkl, ' - ' , mcnt .
 clear mcnt .
 uline .
 endat .
 AT END OF kunde.
 dealer_total = dealer-days1 + dealer-days2 + dealer-days3
 + dealer-days4 + dealer-days5 .
 FORMAT COLOR 3 INTENSIFIED ON.
 WRITE :/ 'Total for : ',itab-kunde,' - ' ,
 79 dealer-days1 ,
 89 dealer-days2 ,
 99 dealer-days3 ,
 109 dealer-days4 ,
 119 dealer-days5 ,
 129 dealer_total .
 CLEAR : dealer_total , dealer .
 ULINE .
 ENDAT.
 AT END OF bzirk.
 state_total = state-days1 + state-days2 + state-days3
 + state-days4 + state-days5 .
 FORMAT COLOR 4 INTENSIFIED ON.
 WRITE :/ 'Total for : ',itab-bzirk,' - ' ,
 79 state-days1 ,
 89 state-days2 ,
 99 state-days3 ,
 109 state-days4 ,
 119 state-days5 ,
 129 state_total .
 CLEAR : state_total , state .
 ULINE.
 ENDAT.
ENDLOOP.
ENDFORM. " DISP_LIST
*& Form LIST_HEADING
 text
--> p1 text
<-- p2 text
FORM list_heading.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
 text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
 '>' text12 INTO text2 ,
 '>' text13 INTO text3 ,
 '>' text14 INTO text4 ,
 '>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/5 'Invoice No.',
 20 'Invoice Dt',
 34 'Material',
 55 'Serial No .' ,
 72 'Plant',
 79 text1 ,
 89 text2 ,
 99 text3 ,
 109 text4 ,
 119 text5 ,
 129 'Floor' ,
 139 'Total' .
ULINE.
ENDFORM. " LIST_HEADING
*& Form SUMMARY_LIST
 text
--> p1 text
<-- p2 text
FORM summary_list.
CLEAR : us, us_total .
LOOP AT itab.
 AT FIRST.
 SKIP .
******modified by dhiraj- 23.11.2007*******************************
 SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
 AND spras = 'E' .
 SELECT SINGLE * FROM t005u WHERE spras = sy-langu
 AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
 PERFORM list_heading_summary.
 format color 4 intensified on.
 write :/ 'Sales District : ',itab-bzirk,30 t171t-bztxt
 ,81 ''.
 ULINE .
 ENDAT.
 AT NEW kunde.
 SELECT SINGLE * FROM kna1 WHERE kunnr = itab-kunde .
 format color 3 intensified on.
 write :/ 'Dealer : ',itab-kunde,30(25) kna1-name1,
 60 'City : ' ,kna1-ort01, 81 ''.
 uline .
 ENDAT.
 AT NEW fkdat .
 format color off intensified off .
 write : /5 itab-vbeln,
 20 itab-fkdat .
 CLEAR flag_fkdat .
 ENDAT .
 at new matkl .
 format color 2 intensified on.
 write :/ 'Material Group : ',itab-matkl, 81 ''.
 skip .
 endat .
 mcnt = mcnt + 1 .
 dealer-days1 = dealer-days1 + itab-days1 .
 dealer-days2 = dealer-days2 + itab-days2 .
 dealer-days3 = dealer-days3 + itab-days3 .
 dealer-days4 = dealer-days4 + itab-days4 .
 dealer-days5 = dealer-days5 + itab-days5 .
 state-days1 = state-days1 + itab-days1 .
 state-days2 = state-days2 + itab-days2 .
 state-days3 = state-days3 + itab-days3 .
 state-days4 = state-days4 + itab-days4 .
 state-days5 = state-days5 + itab-days5 .
 us-days1 = us-days1 + itab-days1 .
 us-days2 = us-days2 + itab-days2 .
 us-days3 = us-days3 + itab-days3 .
 us-days4 = us-days4 + itab-days4 .
 us-days5 = us-days5 + itab-days5 .
 IF flag_fkdat EQ 'Y' .
 NEW-LINE .
 ENDIF .
 write : 42 itab-sernr ,
 59 itab-days1 ,
 69 itab-days2 ,
 79 itab-days3 ,
 89 itab-days4 ,
 99 itab-days5 .
 flag_fkdat = 'Y' .
 at end of matkl .
 skip .
 format color 2 intensified on.
 write :/ 'Total For : ',itab-matkl, ' - ' , mcnt .
 clear mcnt .
 uline .
 endat .
 AT END OF kunde.
 dealer_total = dealer-days1 + dealer-days2 + dealer-days3
 + dealer-days4 + dealer-days5 .
 format color 3 intensified on.
 write :/ 'Total for : ',itab-kunde,' - ' ,
 57 dealer-days1 ,
 67 dealer-days2 ,
 77 dealer-days3 ,
 87 dealer-days4 ,
 97 dealer-days5 ,
 107 dealer_total .
 CLEAR : dealer_total , dealer .
 uline .
 ENDAT.
 AT END OF bzirk.
**************modified by dhiraj - 23.11.2007****************
 SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
 AND spras = 'E' .
 SELECT SINGLE * FROM t005u WHERE spras = sy-langu
 AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
 state_total = state-days1 + state-days2 + state-days3
 + state-days4 + state-days5 .
 FORMAT COLOR 4 INTENSIFIED ON.
 WRITE :/10 t171t-bztxt, " 'Total for : ',itab-bzirk,' - ' ,
 57 state-days1 ,
 67 state-days2 ,
 77 state-days3 ,
 87 state-days4 ,
 97 state-days5 ,
 107 state_total .
 CLEAR : state_total , state .
 ULINE.
 ENDAT.
 us_total = us-days1 + us-days2 + us-days3 + us-days4 + us-days5 .
ENDLOOP.
SKIP 2.
FORMAT COLOR 5 INTENSIFIED ON.
WRITE :/10 'Total for US : ' ,
 55 us-days1 ,
 65 us-days2 ,
 75 us-days3 ,
 85 us-days4 ,
 95 us-days5 ,
 105 us_total .
ENDFORM. " SUMMARY_LIST
*& Form LIST_HEADING_SUMMARY
 text
--> p1 text
<-- p2 text
FORM list_heading_summary.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
 text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
 '>' text12 INTO text2 ,
 '>' text13 INTO text3 ,
 '>' text14 INTO text4 ,
 '>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/10 'State',
 57 text1 ,
 67 text2 ,
 77 text3 ,
 87 text4 ,
 97 text5 ,
 110 'Total' .
ULINE.
ENDFORM. " LIST_HEADING_SUMMARY
*& Form LIST_HEADING_SUMMARY
 text
--> p1 text
<-- p2 text
FORM list_heading_grp_summary.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
 text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
 '>' text12 INTO text2 ,
 '>' text13 INTO text3 ,
 '>' text14 INTO text4 ,
 '>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/10 'Material Group',
 57 text1 ,
 67 text2 ,
 77 text3 ,
 87 text4 ,
 97 text5 ,
 110 'Total' .
ULINE.
ENDFORM. " LIST_HEADING_GRP_SUMMARY
*& Form GET_MUSA_TA
 text
--> p1 text
<-- p2 text
FORM get_musa_ta.
CLEAR vbpa .
SELECT SINGLE * FROM vbpa
 WHERE vbeln = itab-vbeln
 AND parvw = 'RE' .
 and kunnr = 'TA001' .
IF sy-subrc = 0 .
 IF vbpa-kunnr = 'TA001' .
 WRITE : 129 'TA ' .
 ELSE.
 WRITE : 129 'MUSA' .
 ENDIF.
ENDIF.
ENDFORM. " GET_MUSA_TA
*& Form grp_summ_list
 text
--> p1 text
<-- p2 text
FORM grp_summ_list .
CLEAR : us, us_total .
itab_grp[] = itab[] .
sort itab_grp BY werks matkl.
LOOP AT itab_grp.
 AT FIRST.
 SKIP .
 PERFORM list_heading_grp_summary.
 ULINE .
 ENDAT.
 matgr-days1 = matgr-days1 + itab_grp-days1 .
 matgr-days2 = matgr-days2 + itab_grp-days2 .
 matgr-days3 = matgr-days3 + itab_grp-days3 .
 matgr-days4 = matgr-days4 + itab_grp-days4 .
 matgr-days5 = matgr-days5 + itab_grp-days5 .
 plant-days1 = plant-days1 + matgr-days1 .
 plant-days2 = plant-days2 + matgr-days2 .
 plant-days3 = plant-days3 + matgr-days3 .
 plant-days4 = plant-days4 + matgr-days4 .
 plant-days5 = plant-days5 + matgr-days5 .
 us-days1 = us-days1 + itab_grp-days1 .
 us-days2 = us-days2 + itab_grp-days2 .
 us-days3 = us-days3 + itab_grp-days3 .
 us-days4 = us-days4 + itab_grp-days4 .
 us-days5 = us-days5 + itab_grp-days5 .
 IF flag_fkdat EQ 'Y' .
 NEW-LINE .
 ENDIF .
 write : 42 itab-sernr ,
 59 itab-days1 ,
 69 itab-days2 ,
 79 itab-days3 ,
 89 itab-days4 ,
 99 itab-days5 .
 flag_fkdat = 'Y' .
 AT END OF matkl.
 matgr_total = matgr-days1 + matgr-days2 + matgr-days3
 + matgr-days4 + matgr-days5 .
 FORMAT COLOR 4 INTENSIFIED ON.
 WRITE :/10 itab_grp-matkl, " 'Total for : ',itab_grp-matkl,' - ' ,
 57 matgr-days1 ,
 67 matgr-days2 ,
 77 matgr-days3 ,
 87 matgr-days4 ,
 97 matgr-days5 ,
 107 matgr_total .
 CLEAR : matgr_total , matgr .
 ULINE.
 ENDAT.
 AT END OF werks.
 plant_total = plant-days1 + plant-days2 + plant-days3
 + plant-days4 + plant-days5 .
 FORMAT COLOR 4 INTENSIFIED ON.
 WRITE :/10 itab_grp-werks, " 'Total for : ',itab_grp-werks,' - ' ,
 57 plant-days1 ,
 67 plant-days2 ,
 77 plant-days3 ,
 87 plant-days4 ,
 97 plant-days5 ,
 107 plant_total .
 CLEAR : plant_total , plant .
 ULINE.
 ENDAT.
 us_total = us-days1 + us-days2 + us-days3 + us-days4 + us-days5 .
ENDLOOP.
SKIP 2.
FORMAT COLOR 5 INTENSIFIED ON.
WRITE :/10 'Total : ' ,
 55 us-days1 ,
 65 us-days2 ,
 75 us-days3 ,
 85 us-days4 ,
 95 us-days5 ,
 105 us_total .
ENDFORM. " grp_summ_list

{SELECT OBJEK CUOBJ
INTO CORRESPONDING FIELDS OF TABLE TAB_INOB
FROM INOB
WHERE OBJEK IN R_MATNR.
SELECT ATWRT OBJEK ATINN
INTO CORRESPONDING FIELDS OF TABLE TAB_AUSP
FROM AUSP
 FOR ALL ENTRIES IN TAB_INOB
WHERE OBJEK = TAB_INOB-CUOBJ.
SELECT ATNAM
INTO TABLE TAB_CABN
FROM CABN
 FOR ALL ENTRIES IN TAB_INOB
WHERE ATNAM = 'ZCURSEASON'
 OR ATNAM = 'ZCURYEAR'
 AND ATINN = TAB_AUSP-ATINN.
after this you can gether the data into one internal table.
Form one inter nal table it_final.
loop at TAB_INOB.
it_final-OBJEK = tab_inob-OBJEK.
it_final-CUOBJ = tab_inob-CUOBJ.
READ TABLE TAB_CABN WITH KEY OBJEK = TAB_INOB-CUOBJ.
IT_FINAL-ATWRT = TAB_CABN-ATWRT.
IT_FINAL-ATINN = TAB_CABN-ATINN.
DO SAME FOR THIRD TABLE
AFFTER DO ALL
APPEND IT_FINAL.
ENDLOOP.}

Inner join Vs for all entries for performance

hi,
i need to fetch data from 5 tables where i have common key vbeln, is this suggestable to write a select query with inner join or write an inner join for 2 tables with more fileds and for remaining using for all entries.... please suggest how can i increase the performance...all points are rewarded....
thnaks alot.

Is this a dialog program or a data extract? Rob is right in that the difference is negligible IF the number of records involved are only a few.
On the other hand, if you are extracting a large number of records, then the performance depends on a number of things and is generally unpredictable.
The way I approach it is by first developing the extract program with a join because it is easier to code. If the program run time is within the acceptable range, I would let it be and migrate to production. If the performance is of high priority and if the join appears to take long time, then I will comment out the code and try the FAE approach. If the run time with FAE is not markedly better, then I would go back to join.

Query related to inner join V/S all entries........

Hi all,
I have a dought ...related to join and all entries
Which one will be the better as per performance prospective :
1>For all entries
or
2> using inner join condition
i am combining 2 tables ...
but in my where clause is having 6-7 condition if i used inner join concept...
Please let me know thanks for the help...in advance
regards
Amit

Check Re: Multiple Table Join instead of Nested Selects? I wrote a program that compares the performance of a join against for all entries. The join won. But the best thing to do is for you test and compare both methods for your particular situation.
In a select, the most important factor is the use of an index.
Rob

Left outer join using For All Entries

how to implement left outer join using for all entries In REPORTS.

hi Mansi,
this is how i populate
SELECT VGBEL LFIMG POSNR VBELN FROM LIPS INTO TABLE IT_delv FOR ALL ENTRIES IN IT_VBAP WHERE VGBEL = IT_VBAP-VBELN.
LOOP AT IT_delv INTO WA_delv.
WA_FINAL-VBELN_1 = WA_DELV-VBELN_1.
WA_FINAL-LFDAT =   WA_DELV-LFDAT.
WA_FINAL-LFIMG   = WA_DELV-LFIMG.
WA_FINAL-POSNR2 =   WA_DELV-POSNR2..
APPEND WA_FINAL TO IT_FINAL.
CLEAR: WA_FINAL , WA_delv.
ENDLOOP.
LOOP AT IT_FINAL INTO WA_FINAL.
READ TABLE IT_vbap INTO WA_vbap WITH KEY VGBEL = WA_FINAL-VBELN.
WA_FINAL-VBELN = WA_VBAP-VBELN.
WA_FINAL-MATNR = WA_VBAP-MATNR.
WA_FINAL-KWMENG = WA_VBAP-KWMENG.
WA_FINAL-NETWR = WA_VBAP-NETWR.
MODIFY IT_FINAL FROM WA_FINAL.
ENDLOOP.
My question is , it_vbap has 5 five records A,B,C,D,E.
in it_delv ,there are 20 record corrresponding to A,B,D of IT_VBAP.
in final table i wont get info of recors B,E. I want those info also in final table ..how can i do that...

JOINS Vs FOR ALL ENTRIES

hi,
I have to extract data from 6 tables based on cross check reference among these tables.some of the tables do not have foregin key references,but i have written SELECT query joining all the 6 tables, it works fine.
My question is, if i use FOR ALL ENTRIES instead of an inner join will it improve performance?
but no of database hits would be more isn't it?
Kindly reply ASAP

hi ,
here you go ,,,
1. in the innerjoin system will hit the databasa one time.. then fetch the data..for the tables u have joined... when u use the join make sure the query shold not effect the performance.. try to paas all the primary key values.. then link the tables using the complete primary...
2. when u use the FOR ALL ENTRIES.. the system will retrive all the records which matches the FIELDS which u r refering in the Internal tabel... while using the FOR ALL ENTRIES.. creal the duplicate entries.. other wise it select the record more number of time at data base level... but u will get the entries properly...
Regards,
Ranjita

Joins to For All Entries

Hi ABAP Folks,
I am extracting a set a values from 5 different tables using FOR ALL statement and consolidating the results of each internal table to form a MASTER INTERNAL TABLE containing fields USERNAME ROLENAME ROLENAMETEXT TCODE TCODETEXT.
BNAME UNAME->(USERNAME)
AGR_NAME -> ROLES
OBJECT,OBJCT->AUTHORISATION OBJ
If the user input is a group name.
Select BNAME CLASS From USR02 into LT_USR02 where CLASS IN S_USRGRP
Select UNAME AGR_NAME into LT_AGR_USERS From AGR_USERS For All entries in LT_USR02 where UNAME = LT_USR02-BNAME
Select AGR_NAME OBJECT into LT_AGR_1251 From AGR_1251 For All entries in LT_AGR_USERS where AGR_NAME = LT_AGR_USERS-AGR_NAME
Select AGR_NAME TEXT into LT_AGR_TEXTS From AGR_TEXTS For All entries in LT_AGR_1251 where AGR_NAME = LT_AGR_1251-AGR_NAME
Select OBJCT TCODE into LT_TSTCA From TSTCA For All entries in LT_AGR_1251 where OBJCT = LT_AGR_1251-OBJECT
Select TCODE TEXTS into LT_TSTCT From TSTCT For All entries in LT_TSTCA where TCODE = LT_TSTCA-TCODE.
Resultant ITAB IS User Name, User Group, User Group Texts, Transaction Codes, Transaction Code Text.
Is it better to go for a join in this case?Will joins be more efficient?Any help welcome and will be rewarded.
in case yes,Syntax for the above case will be helpful.
Thanks in Advance.


Jayant,
The joins are helpful when the two tables are related to each other basically VBAK and VBAP would be useful to join on document number but it is not advisable to join vbap and aufo on material number.
In your case you can join the USER* related data and Transaction* related data via joins.
Message was edited by: Anurag Bankley
Message was edited by: Anurag Bankley

Inner join Vs For all entries

Similar Messages

Maybe you are looking for