Input Parameter Details on Function Module PHIE_HIERARCHY_TRANSFER

I was trying to find some documentation on how to populate the input parameters when using Function Module "PHIE_HIERARCHY_TRANSFER". But could not locate any documentation on this...
Would appreciate if anyone can shed some light on this...?
Thanks in advance.
RK.

Did some research, but could not get any good documentation on the input parameters for the Function Module PHIE_HIERARCHY_TRANSFER...
Input Parameters:
I_S_HIEBAS TYPE RSAP_S_HIEBAS
I_S_HIEFLAG TYPE RSAP_S_HIEFLAG
I_S_HIERSEL TYPE RSAP_S_HIER_LIST
Any additional information on the above parameters is appreciated.
Thanks.

Similar Messages

Pass multiple values as single input parameter into pipelined function

Hi all,
My need is to pass multiple values as single input parameter into pipelined function.
For example - "2" and "3" are values of input parameter "t":
with data as (
select 1 as t from dual union all
select 2 as t from dual union all
select 3 as t from dual union all
select 4 as t from dual union all
select 5 as t from dual
select * from data where t in (2,3)Is it possible at all?

Not exactly sure, but usually 'multiple values'+'pipelined function' = some IN-LIST related approach?
See:
SQL> create table data as
2 select 1 as t from dual union all
3 select 2 as t from dual union all
4 select 3 as t from dual union all
5 select 4 as t from dual union all
6 select 5 as t from dual;
Table created.
SQL> --
SQL> CREATE OR REPLACE FUNCTION in_list (p_in_list IN VARCHAR2)
2 RETURN sys.odcivarchar2list PIPELINED
3 AS
4    l_text VARCHAR2(32767) := p_in_list || ',';
5    l_idx   NUMBER;
6 BEGIN
7    LOOP
8      l_idx := INSTR(l_text, ',');
9      EXIT WHEN NVL(l_idx, 0) = 0;
10      PIPE ROW (TRIM(SUBSTR(l_text, 1, l_idx - 1)));
11      l_text := SUBSTR(l_text, l_idx + 1);
12    END LOOP;
13
14    RETURN;
15 END;
16 /
Function created.
SQL> --
SQL> select *
2 from   data
3 where t in ( select *
4                from   table(in_list('1,2'))
5              );
         T
         1
         2
2 rows selected.http://www.oracle-base.com/articles/misc/dynamic-in-lists.php
or
http://tkyte.blogspot.nl/2006/06/varying-in-lists.html

Passing Message number as an parameter in a Function module

Hi all,
I have to pass the Message number(sy-msgno) as an parameter into an function module
and that Message should be like "PO NUMBER ####### is deleted"
This Funtion module is an loop and PO number changes for every loop
How to define this Message in the Message class.
Regards
Ajay

Hi,
Message definition SE91 should be like below.
PO NUMBER & is deleted.
Here & is the place holder where u can pass one value dynamically. If u want to pass 2 dynamic values then u have to use 2 place holder and so on.
eg: PO NUMBER & is deleted by user &.
When u call this message it will display like
PO NUMBER 12345 is deleted by user user1.
Thanks,
vinod.

How can I pass Recordsets as input parameter to a Function ?

Hi Gurus,
I want to create a function that receive recordsets as input parameter also returns recordsets as output.
I have a requirement to do stock taking for all order items of one Order number in one single query execution (to avoid row by row basis).
From the post in the forum I know that a function can return recordsets / query result using REF CURSOR or pipelined table function.
My question is : how to pass the recordsets as input parameter to that function ?
(because I could have 75 rows item in one order number)
Below is the DDL and the query :
create table stocks (Product char(4), Warehouse char(5), expireddate date, qty_available number)
insert into stocks values('P001', 'WH001', '01-dec-2006', 30)
insert into stocks values('P001', 'WH002', '01-dec-2006', 50)
insert into stocks values('P001', 'WH002', '01-jan-2007', 50 )
insert into stocks values('P001', 'WH001', '01-Mar-2007', 150)
insert into stocks values('P002', 'WH003', '01-dec-2006', 25)
insert into stocks values('P002', 'WH003', '15-Jan-2007', 50)
insert into stocks values('P002', 'WH003', '01-Mar-2007', 75)
insert into stocks values('P003', 'WH001', '01-dec-2006', 30)
insert into stocks values('P003', 'WH002', '15-Jan-2007', 40)
insert into stocks values('P003', 'WH003', '01-Mar-2007', 50)
CREATE TABLE Order_Detail (PRODUCT_ORD CHAR(4), QTY_ORD number, Priority_WH CHAR(5) )
INSERT INTO Order_Detail VALUES ('P001', 75, 'WH003') // previously 'WH002'
INSERT INTO Order_Detail VALUES ('P002', 45, 'WH002')
INSERT INTO Order_Detail VALUES ('P003', 55, NULL)
The query for stock taking :
select product,warehouse,expireddate, least(qty_available-(sm - qty_ord),qty_available) qty
from ( select product,warehouse,expireddate,qty_available,qty_ord, sum(qty_available) over(partition by product order by s.product,expireddate,decode(warehouse,priority_wh,0,1),warehouse ) sm
from stocks s,order_detail o
where s.product = o.product_ord order by s.product,expireddate,decode(warehouse,priority_wh,0,1) )
where (sm - qty_ord) < qty_available

Hi,
This my requirement :
I have (simplified)Order_Detail as below :
CREATE TABLE Order_Detail (PRODUCT_ORD CHAR(4), QTY_ORD number, Priority_WH CHAR(5) )
INSERT INTO Order_Detail VALUES ('P001', 75, 'WH003') // previously 'WH002'
INSERT INTO Order_Detail VALUES ('P002', 45, 'WH002')
INSERT INTO Order_Detail VALUES ('P003', 55, NULL)
Then I want to do stock taking from my STOCK table (described on my first post on this thread)
create table stocks (Product char(4), Warehouse char(5), expireddate date, qty_available number)
The rule is : The stok taking is on First In First Out basis, on expireddate.
And I want to do it in single query.
I want to make this a Function / Stored Procedure so that other transaction can also make use of this query.
That is why I need to pass the 3 rows oy mr Order_Detail above, do the query, and return the result.
Then INSERT the result into ORDER_DETAIL_PER_EXPIRED_DATE table.
I hope this clear my requirement, is this possible ?
Thank you,
xtanto

Is it necessary to pass RETURN parameter in bapi function module

Hai All,
            Is it necessary to pass structure to RETURN parameter in bapi_transaction_rollback function module. If it is not necessary then how can it gives return value. Please give me the answer for this one. some sample code below...
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
   RETURN        = i_return.
        LOOP AT i_return into wa_return WHERE type EQ c_error.
          wa1_out-postdoc = wa_return-message.
        ENDLOOP.
Thanks & Regards.
Laxman.P

hi
bapi should never throw an error as it might be called for mass data proceessing
and it is prefferred not to hault the proceess bcoz of one or two errors.
that's why the error or success messages are caught and returned in return table.
in bapi_transaction_rollback the return parameter is not necessary as it will work without that as well.
the purpose of rollback bapi is just to undo whatever done before that.
regards
vijay
<b>reward points if helpful</b>
Message was edited by:
        vijay sharma

HOW TO PASS SELECT-OPTIONS PARAMETER TO A FUNCTION MODULE.

Hi friends.
HOW DO U PASS A SELECT-OPTIONS PARAMTER TO A FUNCTION MODULE AS ITS IMPORT PARAMETER(IN MY CASE rfc fM) .
Really urgent!!!
thanks to one and all

Hi,
If you are passing a single value, its better you take it from s_option-low or s_option-high (select options).
Else if you are passing values to the FM in a loop for all select option values, then better you declare an internal table with type <b>WSELKUNNR</b>.
get low & high fields from each row & pass them.
It will make you clear when you check out your select options in debug mode by entering different combinations of inputs.

Use of exporting parameter VIA_T777D in function module RH_READ_INFTY

Hi,
Can any one explain me the use of exporting parameter VIA_T777D in the function module RH_READ_INFTY.
Regards,
Aravind

Closing.

Passing the parameter in the Function module MESSAGE_SEND_AS_MAIL

Hi all,
I have to send the same message to five different mail ID's using the Function module MESSAGE_SEND_AS_MAIL
How to pass this five mail ID's in the Parameter Reciever of the Function module
Regards
Ajay

see if this helps
REPORT Z_MESSAGE.
data receiv type standard table of SOMLRECI1 initial size 0.
data wa type SOMLRECI1.
wa-receiver = 'email address in caps'.
wa-REC_TYPE = 'U'.
append wa to receiv.
wa-receiver = 'email address in caps'.
wa-REC_TYPE = 'U'.
append wa to receiv.
do so more more three
CALL FUNCTION 'MESSAGE_SEND_AS_MAIL'
EXPORTING
    msgid           = 'Z_ZZZ_CA_MESSAGES'
    msgno           = '000'
   MSGV1           = 'material'
   MSGV2           = 'MAT'
   MSGV3           = 'MM'
   MSGV4           = 'MMM'
tables
    receivers       = receiv[]
          COMMIT WORK AND WAIT.
then u can go to SOST transaction and see that the mail has been or is yet to be sent. It worked for me. The message comes in an PDF form to the mail box.
Edited by: Biswadeep Ghosh on Jun 25, 2008 2:28 PM
Edited by: Biswadeep Ghosh on Jun 25, 2008 2:30 PM

Parameter NEW_ITEM_DATA in function module BAPI_OUTB_DELIVERY_CHANGE

Hi, we have to add a new item to a delivery using ABAP. The function module BAPI_OUTB_DELIVERY_CHANGE has a parameter NEW_ITEM_DATA, but unfortunately no documentation about it. It Does anybody have an example on how to add a new item with this FM?
Thanks for your help, best regards, Martin

Hi,
I have used this way:
Loop at it_vbrp.
CLEAR: wa_hdata, wa_hcont, d_delivy, it_bapiret2.
     wa_hdata-deliv_numb = it_vbrp-vgbel.
     wa_hcont-deliv_numb = it_vbrp-vgbel.
     wa_hcont-dlv_del    = c_x.
     d_delivy            = it_vbrp-vgbel.
*---Deleting delivery doc (VL02)
     CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
       EXPORTING
         header_data    = wa_hdata
         header_control = wa_hcont
         delivery       = d_delivy
       TABLES
         return         = it_bapiret2.
*---commit
       CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           wait = 'X'.
Endloop.
Thanks,
Krishna

"Changing" parameter and "Tables" parameter defintions in function module

If one defines "Changing" or "tables" parameters, they are treated as reference parameters.
It becomes obvious for "tables" parameters where one does not have option to check box for "Pass by Value". But for "Changing" parameters, they provide the checkbox for "Pass by Value". Even when you select this option, the function module seems to handle the parameter as a reference parameter (whatever changes you make to it in the function module are retained when you return back to a calling program).
My question is why then SAP has provided the checkbox of "Pass by Value" for "Changing" parameter?
Thanks.
Jitendra Mehta

Hi Chaiphon:
Thanks for explanation but I know the theory of "Pass by reference" versus "Pass by Value".
Let me rephrase my question.
When I use the importing parameter (say as a table with a dictionary table type) with reference (not "passing by value"), and if I modify the value of the parameter, the calling program (which calls function module) receives the changed value after the call.
When I use the importing parameter with "Pass by Value" box checked, the modifications made to the table inside the function module is not retained after the code leaves function module and returns to the calling program.
My question is why not the same behaviour with the "Changing parameter" in function module definition?
And if Changing parameters are always reference parameters, then why SAP has provided the "Pass by Value" check box?

Details for function module COIS_SELECT_PARAMETERS_SET

Hi All,
I want to use function module COIS_SELECT_PARAMETERS_SET in an enhancement program for generating a ALV report of production orders. Can anybody please provide me the details of this function module and how it works?
Thanking you
Anuraag

HI Anuraag,
Two parameters are Mandatory
1. RSPARAMS_TT
2. TCOA
You have to pass values to both the parameters
RSPARAMS_TT - is a Structure. Parameters / select-options has to be passed
TCOA - is a table. Profile id has to be passed.
Just double click on both the parameters, you will get an idea
Jai

How to pass multi value selection parameter to SAP Function Module?

Hi ,
Anyone know how to pass CR multi value parameter - array to SAP Function module ?
eg multi selection of customer in CR
and then pass to Function module
in SAP FM, the SQL select these customer only
How should the import parameter / table of SAP Function module designed?
and how should CR pass the data to SAP FM
thx
John

Moved to Integration Kit forum

Select-option parameter passed to function module

hi,
I have passed the select-option parameter as a table to my function module,
suppose i have passed it as date(it contains field date-high and date-low)
In my function module while i am looping the table and selecting the data according to date_low,it is going to select only the data according to date_low.
since the table contains only one row.
loop at date.
select the data according to date_low.
date_low = date_low +1.
modify date_low.
endloop.
how can i select all the data from date_low and date_high?

Hi,
there is issue design of ur FM .
You have to put 2 table parametrs or 2 import paremeters in the FM ,after that with in the Function module fill the internal table of type ranges (say itab).
After filling the ranges internal table, this can be used in ur select stament just as select option ( select ...where podat in itab)
revrt back if any issues.
regards,
Naveen

Table type in import parameter in rfc function module

Hi we don't have the table type in our system which exist in the other system which is the import parameter of the rfc function module.so how can we pass the parameter. shell we create the same table type in our system also.it is a table type for a deep structure.

Hello,
I donot have access to CRM box I cannot view the FM. You can verify with the CRM counterpart what exactly is the TYPE for param DATA.
Else you can define a generic internal table (TYPE TABLE) & try calling the FM.
BR,
Suhas

Question about destination parameter in RFC function module

Greetings,
For execution of RFC function module such as MD_STOCK_REQUIREMENTS_LIST_API on local server, the destination parameter is not required or it can be DESTINATION 'NONE'. I observe that the second option is much slower than the first option. My question is why the second is much slower.
Thanks,
Hung

I've tested it with se37 by leaving RFC target system blank or filling it with 'NONE' , I saw 53000 microseconds versus 45000 microseconds.
Hung

Input Parameter Details on Function Module PHIE_HIERARCHY_TRANSFER

Similar Messages

Maybe you are looking for