HOW TO PASS SELECT-OPTIONS PARAMETER TO A FUNCTION MODULE.

Hi friends.
HOW DO U PASS A SELECT-OPTIONS PARAMTER TO A FUNCTION MODULE AS ITS IMPORT PARAMETER(IN MY CASE rfc fM) .
Really urgent!!!
thanks to one and all

Hi,
If you are passing a single value, its better you take it from s_option-low or s_option-high (select options).
Else if you are passing values to the FM in a loop for all select option values, then better you declare an internal table with type WSELKUNNR.
get low & high fields from each row & pass them.
It will make you clear when you check out your select options in debug mode by entering different combinations of inputs.

Similar Messages

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How to Pass Select-options Single values as Parameter value to Method ?

Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thanks

hi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
   WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
   THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.

How to pass select-option variable in function

hi ,
select-option : s_akont for KNB1-akont OBLIGATORY.
i have to pass s_akont in function without using
s_akont-low & s_akont-high.
rightnow i am passing like s_akont but it is giving me a error :
s_akont is followed by niether by an internal table nor by a value list.
what should i write.
regards
raj

Hello Raj
I assume that you want to import your select-options into your function module(s). Since select-options are, by default, itabs with header lines you have to pass your select-options as following:
CALL FUNCTION 'Z_...'
TABLES
it_selopt = s_akont[].
The TABLES parameter it_selopt could be of type ANY or better of type TABLE.
If you want to use generic select-option structure you can use RSDSSELOPT and the table type TT_RSDSSELOPT. In this case you would need to copy your select-options from s_akont to a generic type s_generic (of type RSDSSELOPT).
Regards
Uwe

Passing select option parameter to a procedure

Hello, i need to know pass a select option parameter to a procedure. I tried the following
For eg if i have a select option called so_belnr & i call the procedure using the following
PERFORM VALIDATE_DOCUMENT TABLES SO_BELNR USING GJAHR BUKRS , i still cannot use the
select option paramter in the called procedure.
Pls help.

Hi,
in topinclude...
data: lr_belnr type RNG_BELNR.
at start-of-sel.....
move so to range..
refresh: lr_belnr.
lr_belnr[] = so_belnr[].
PERFORM VALIDATE_DOCUMENT TABLES lr_belnr USING GJAHR BUKRS .
in form:
... tables lr_belnr like structure of RNG_BELNR.
reason(my definietion): perfom doesn´t know if the select-options is availible.....
bestreg
Robert

How to pass select option value to function module while using service call

Hi,
I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
rgds
sudhanshu

Hi,
Thank s for your reply. In fact im doing similar with following variation:
i) collected range values using get_range* method.
ii) separate low and high values as:
read table <field2> index 1 into wa_range.
vert2_low = wa_range-low.
vert2_high = wa_range-high.
(Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
iii) Now setting these RFC attribute as:
lo_el_importing->set_attribute(
 EXPORTING
 name = `S_VERT_LO`
 value = vert2_low ).
and
lo_el_importing->set_attribute(
 EXPORTING
 name = `S_VERT_HI`
 value = vert2_high ).
iv) In RFC im having my query as :
select <fld list> from BUT000 into table itab where vertical in r_vert.
Here, r_vert is a range defined as:
ranges r_vert for <fld refrence>
r_vert-sign = 'I'.
r_vert-option = 'BT'.
r_vert-low = S_VERT_LO.
r_vert-high = S_VERT_HI.
append r_vert.
Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
Please suggest.
Rgds
Sudhanshu

How to pass select-options variable to a form.

I have a select-options variable smatnr. I need to pass this select-options variable to a form by
perform using smatnr changing svar.
form cond_types using pmatnr changing svar.
IT gives an error saying imcompatible types been passed between smatnr and pmatnr.
Any ideas, what is wrong. How do I pass a select-option variable into a form the right way.
Thanks
Ram

Try like this:
TABLES: vbak.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
START-OF-SELECTION.
PERFORM get_data USING s_vbeln[].
*& Form get_Data
FORM get_data USING p_s_vbeln LIKE s_vbeln[].
ENDFORM. " get_Data
Regards,
Naimesh Patel

How to pass select-options to the Adobe Form?

Hello Experts,
I am facing an issue on passing the SELECT-OPTIONS from driver program to Adobe Form .I created a structure which holds sign,Option,Low and High fields, assigned to the table type and passed to the form,Its going dump can anyone resolve the issue.
Regards,
Girish Kumar vedurupaka.

Hello simi ,
Using se11 created a structure for select-options the created a table type for that structure. I pass that table type to the importing parameter in the form interface.
in the Global data:
   IT-MARA TYPE TY_MARA.
IN TYPES :
TYPES :BEGIN OF ty_mara1,
         MARA TYPE MARA,
         ERSDA TYPE ERSDA,
         ERNAM TYPE ERNAM,
         LAEDA TYPE LAEDA,
        END OF TY_MARA1.
TYPES TY_MARA TYPE TABLE OF TY_MARA1.
IN CODE INITIALIZATION I WRITE THE SELECT STATEMENT.
SELECT MATNR ERSDA ERNAM FROM MARA INTO TABLE IT_MARA
WHERE MATNR IN S_MATNR.
in the driver program exported the S_MATNR to the the form.
when i am executing the program and giving the range in S_MATNR values are not importing and and going to dump.

How to pass select-options in key while using Read Statement.

Hi SAP gurus,
I was using a select stmt. with were clause of Select-options it was working fine,
now my scenerio is changed i need to read an internal table
with key of select-options....
how to read internal table with key S_MATNR (Select-options).

Hi,
We can certainly do this.
We need to loop the internal table with select-options condition.
Example :
LOOP AT ITAB WHERE FIELD = S_FIELD.
ENDLOOP.
This should solve your problem.
Plz reward if useful.
Thanks,
Dhanashri.

Enabling Select-options in an RFC function module

Hi Abaper's,
I am using BAdi definition NOTIF_EVENT_SAVE for sending mail notification to user.
Under CHANGE_DATA_AT_SAVE method I have called an RFC enabled function module and written code here for mail notification.I used cl_bcs class for sending file.On executing this I am getting a mail box wherein we can enter user id and send mail.But I don't want to use cl_bcs for sending mail now.So I modified the code by including SO_NEW_DOCUMENT_SEND_API1 function.
My requirement is I want to enable select-options in this function module so that user can get a popup wherein he can select user name from master.On activating I am getting following error:
Local SELECT-OPTIONS are not allowed (FORM routine or GET event is active).
Can any one help me how to resolve this error?
I am using this customized function module for mail notification.If I hardcode mail id,notification is working properly.
Regards,
Sam

sam24 wrote:>
> My requirement is I want to enable select-options in this function module so that user can get a popup wherein he can select user name from master
Hi Sam,
in the function groups TOP include, you can define a selection-screen:
SELECTION-SCREEN BEGIN OF SCREEN 9786 [TITLE title].
select-options: s_uname for ...
SELECTION-SCREEN END OF SCREEN 9786.
and in the function use
CALL SELECTION-SCREEN dynnr
[STARTING AT col1 lin1
[ENDING AT col2 lin2]]
Everything declared in the function body source code is local.
But you must make sure that CHANGE_DATA_AT_SAVE is not processed in update task.
Regards,
Clemens
Edited by: Clemens Li on Jan 16, 2011 7:36 PM

Passing SELECT-OPTIONS value to Function Module

Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon Meng

Hello Joon,
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas

Passing select-options value in method

How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
Thanks

Hello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass   TYPE REF TO zcl_myclass,
           gd_repid         TYPE syst-repid.
PARAMETERS:
p_bukrs   ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
    EXPORTING
      id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT = id_calling_report
TABLES
    SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe

Passing Select-option to Function Module

Hi ,
I want to pass a select-option directly to the function Module tables parameter . Can anyone highlight on how i can declare the table in Function module side .
Thanks & Regards,
Raj

Hi.
In the TABLES tab of the specific FM ,
give the parameter name ( which u have defined as Select options ). Since select options is like an Internal Table with values sign,option,low and high , u can give it here.
Also give the ref. type and type specification.
Pl try this.
Thanks,
Maheshwari.V

How to transfer select options variable

Hello:
I can pass parameter to parameter id such as p_fikrs, but how to transfer select options parameter to parameter id such s_fictr.
SET PARAMETER ID 'FIK' FIELD p_fikrs.
SET PARAMETER ID 'FIS' FIELD s_fictr.
SET PARAMETER ID 'FPS' FIELD s_fipex.
SET PARAMETER ID 'GJR' FIELD p_year.
CALL TRANSACTION 'FMRP_RFFMEP1BX' AND SKIP FIRST SCREEN.
Thank you very much!

Use SUBMIT with the following option
SUBMIT... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Hope dis helps,
Reward if it does

HOW TO PASS SELECT-OPTIONS PARAMETER TO A FUNCTION MODULE.

Similar Messages

Maybe you are looking for