Input record and view details

I'm using a form to register users and immediately after the
registration I want to go to a detail page that shows the users
details. How do I create a query to do this in php?
Kind regards,
Robin Meeuwsen

Hi,
you can retrieve the new record this way:
SELECT * FROM user_table ORDER BY id DESC LIMIT 1
- "id" is your unique numeric autoincrement field
- DESC means "in descending order"
- LIMIT 1 means "retrieve just one record"

Similar Messages

DVR to DVR Multi-Rroom Recording and Viewing - Can It Be Done?

I’m considering switching from D*TV to FIOS but haven’t done so yet because the FIOS DVR technology was far behind D*TV. It appears to be getting much better since I last checked in with FIOS last year. The new 7232 DVR with 500 Gig drive is a great start. Sounds like the “coming soon” v1.9 firmware adds a lot as well. The remaining problem I have is that I sometimes record three shows at once so I need two DVR’s. I’ve heard that the FIOS multi-room DVR allows you to watch recordings on set-top boxes but not other DVR. In an online chat with FIOS rep they said I could watch a recording from one DVR to another DVR BUT both DVR’s had to be multi room DVR’s. Can anyone confirm that this can be done?

No, that cannot be done. One DVR cannot see the recordings from another DVR. Period. Does not matter if it is a DVR or MR-DVR. In fact a DVR and MR-DVR are the same equipement. The MR feature is just that, a feature, like adding HBO. Besides there can only be one MRDVR in the house anyway. They were giving you wrong information. The ability to share between DVR's is supposed to be in the works, but there has been no annoucement as to when or if that will become available.
====================================================================================
Error exists between keyboard and chair.

WVC54G - Record and View

I've just got hold of a WVC54G and installed it onto my Vista Home Premium system.
I installed the software and can't get it to work.
Th camera works as I can see it working via the browser but everytime I try and run the software I get the following erro message:-
"VideoRecording MFC Application has stopped working".
Can anyone help?
Thanks
Steve

Yes, I also assume that it is a compatibilility issue with WinVista, did you try the Camera utility on a different O.S ?

Batch input recorder and sm20

Hi guys,
I have problem in recording transaction sm20. All the time when I execute the transaction I receive no log from the system:
CALL_TRANSACTION SM20 Return code = 0 RECORD: 0
any advice needed.

Hi Fred
How about using BAPI: BAPI_BATCH_CREATE. Documentation
is provided which can help you in using the same.
Kind Regards
Eswar

Inclusion record and replen

Hi Friends,
What is customer inclusion record and what does mean all material are replen?
Is there any t code/report to check inclusion report
Required urgently.
Regards
Edited by: Amit Kumar on Nov 19, 2008 12:08 PM

eTester is busy comparing contents and writing items to the tree. One way you can speed things up is to select Options-->Current Script. Under the "Recording" section click "Visual Script." By unchecking record and view for some or all the items you will speed up the record and playback process. Be sure to check the box "Use same settings for new scripts" if you want these settings in new scripts.

ANN: 1/2-hr webinar (free), June 5 -- Enable and encourage user input in PDFs (viewed with Adobe Rea

Enable and encourage user input in PDFs (viewed with Adobe Reader)
with FrameMaker-to-Acrobat TimeSavers + Form Assistant
Half-hour webinar (free; no fluff, no hype, no nonsense)
Wednesday, June 5, starting 9am PDT
Register at: https://www3.gotomeeting.com/register/157658438
Enabling PDFs for various types of user input can strengthen the interaction between users and the content, and improve satisfaction due to greater user involvement/control. In addition, designated avenues for user input can contribute to documentation quality and provide outlet for frustration, for example by sending inputs regarding the documentation or the product directly from within the PDF.
Techniques demonstrated in this webinar include features that are all embedded in PDFs that are viewed with the free Adobe Reader:
• text fields where users can record data values and options
• checkboxes to track progress
• page marks and notes (optionally e-mailed)
• embedded grading/feedback forms
• storing of useful search queries within the PDF for future use
Shlomo Perets
MicroType, http://www.microtype.com
FrameMaker/Acrobat/Captivate training & consulting • FM-to-Acrobat TimeSavers/Assistants

https://crash-stats.mozilla.com/report/index/bp-0a0b872f-5127-4ee1-a355-ca3cb2120721
https://crash-stats.mozilla.com/report/index/bp-9cd87dd7-205f-4844-9e6d-3ce262120721
https://crash-stats.mozilla.com/report/index/bp-8c07c846-b2ed-4535-8db4-4ee072120720
https://crash-stats.mozilla.com/report/index/bp-f29a89ed-f8b1-4a62-ba3e-983e22120720
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-1226c709-5f87-41c6-95d3-4310d2120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-e16d2b91-0f7d-4e5a-9e25-255852120718
https://crash-stats.mozilla.com/report/index/bp-4de2a0da-dd36-4ec8-8e53-c42742120714
https://crash-stats.mozilla.com/report/index/bp-eac1c5a5-2dce-4415-b645-07a1f2120714
https://crash-stats.mozilla.com/report/index/bp-1ede5bd3-8c72-4362-8d79-4f29c2120714
https://crash-stats.mozilla.com/report/index/bp-d4fd5dae-dacd-45f8-9549-2c3702120722
https://crash-stats.mozilla.com/report/index/bp-ca510991-de29-44b3-be02-0255a2120722
https://crash-stats.mozilla.com/report/index/bp-8600c221-3fd3-4eaa-a5af-a602b2120722
With Hardware Accelaration in Flash turned off. Still crashing.

ADF 10.1.3: Simultaneous insert of Master and Multiple detail records

Hi,
I'm trying to implement an Insert page (JSP document) having a Master table form and Multiple detail records grid with a Pop up to insert Detail records into the grid.
The user should be able to input Master record details, then Detail records one by one, and finally insert all into the database.
I'm wondering how this could be done using the Drag n drop feature of ADF (with ADF faces, JSF and Toplink) to the maximum extent.
Please give me a rough guideline on how this could be done.
Thanks in advance
Vikas

Anyone???

Difference between batch input method and batch input recording in LSMW?

hi,
plz tell me the difference between batch input method and batch input recording in LSMW?
thanks & regards
Ruban

Hi Ruban,
The main difference between the two is in lsmw we can view the code status at any time just by coming to prvious steps, but whereas in batch input method unless the recording is finished we cant view the code.
second diff is tht we need to do lot of coding in batch inptu whereas here in lsmw we need not do much coding and mapping to data.
third diff is that batch input is both inbound and outbound where as lsmw is only inbound.
hope u got the differences.....
Regards,
sana M...

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Recording and playing sound input from mic simultaneously in iphone/ipad

I want to simultaneously record and play the sound from a mic in iphone. As thecricket commentory application.
Please provide me a solution for this.
Is this possible in iOs.

This probably isn't going to sound very helpful, for which I apologise in advance, but I'm afraid it's the truth...
The only way you stand any way of doing any of this is by using ASIO4ALL, which can aggregate different drivers from multiple devices. But I don't rate your chances too highly, I'm afraid - USB mics have long been the problem child of computer-based audio. On top of that, you are trying to get sounds in and out of a separate device at the same time - not only that, but it's a Creative Labs gamer's device and they are second only to USB mics in terms of the 'difficult' stakes - search this forum!
A much, much better way to attempt to do this would be to use a sensible ASIO external device with sufficient inputs, and a mic that plugs into it, not a USB one. That way you could route the inputs and outputs appropriately, and use the device's monitoring so that you could monitor what you need to. I wouldn't attempt to do anything like this any other way, I'm afraid. Another approach (which can be made to work well) is to use an external mixer to do most of the work - often it's easier to set up the monitoring on these. You can get mixers with the appropriate interface built-in, and they don't cost a fortune either. Mackie and Behringer make suitable devices.

How to create One Master - and 2 detail records region

Hi,
My requirement is to have three regions on a single page, one for master record and two for detail records.
Also, one detail record region needs to upload images (photos) to database.
Can some one tell me how to do this in APEX.
Thanks
Aali

Hi Aali, I have the same issue in a master detail form, I don't know how to upload images in the detail form, can you help me please.
Thanks and regards,
Wilson

Download Links for JMS Explorer to view message and its details

Can i get the links for downloading the JMS explorer to view messages and its details on j2ee server.

I checked Hermesjms tool but found that it does not work with j2ee server.
Is there any other JMS explorer tool to view messages and its details on j2ee server specifically.

Auto record meeting/ class and view/ share the recording.

I have integrated my adobe connect account to be able to trigger the meeting from moodle. Any idea how I can get my students to have a recording of their class session once it is completed and view the recording inside of their moodle account? We are an eLearning company.
Preferably, the meeting/ class session should be auto recorded without the users (teacher or student) having to manually record the session. Our account only has one host enabled. Both student and teacher will enter the class as presenters (classes are 1 on 1).
Apparently only hosts have the ability to record the class and it would be abit of a bother if I would have to enter every class and record it. Any auto record class/meeting session function?
Thanks in advance

was wondering if anyone could help. I need to set this up on my connect
server. need to force connect to auto record all meetings/ shared meetings.
this is help file for connect 8 but i'm using latest version of connect.
any assistance much appreciated.
http://help.adobe.com/en_US/connect/8.0/webservices/WS8d7bb3e8da6fb92f73b3823d121e63182fe- 8000_SP1.html
feature-id
Description
An attribute describing a feature that either users can use or things that
can occur during a meeting. Use feature-id with the meeting-feature-update
<http://help.adobe.com/en_US/connect/8.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171ddf77-7 fc5_SP1.html>
action.
For more information on the pods that can be enabled or disabled, see
the *Adobe
Connect User Guide*.
Values
Value
Description of functionality when value is enabled
fid-archive
Lets a host start and stop the recording of a meeting. Disabling this
setting means that recording settings are not controllable by the host.
To set Connect to automatically record all meetings, you must both disable
fid-archive and enable fid-archive-force.
fid-archive-force
Sets all meetings to be recorded upon the start of the meeting. Recorded
meetings appear in Adobe Connect Central.
On Thu, Jun 19, 2014 at 1:45 AM, Kristian C <[email protected]>

Constantly record and analyze microphone input

Is it possible to analyze microphone input data while it is being recorded? My program needs to measure the input voltage and the program needs to procede when the voltage is equal to 5V.
Thank you.

The sound card can be a bit problematic in this sense especially if you change the input gain for the mic and watch out for any bass boost function being on used as this will affect the scale as well.
As for the scaling on a standard sound card, there is none as such (see article 3 below). The input
is represented as ±32767 on a standard 16 bit card and obviously larger
for the newer 24bit cards.
The easiest option would be to generate a signal, measure it and then play into the mic input. I would suggest that the mic input (or possibly better the line input) would be in the order of a couple of hundred milli volts so if youre sure that you have a five volt signal then you will need to scale the input with a resistor (say a 5K ohm variable resistor set up as a potential divider).
You may find that the following articles will help not only with the principles but with the practice as well: -
http://www.virtins.com/Virtins_Sound_Card_Oscilloscope_Probe_Manual.pdf
http://www.techmind.org/audio/
This link is quite good as well:-
http://www.audioprecision.com/index.php?page=support&id=1100001014
If its a mac the following may apply (I don;t use them a great deal, sorry): -
http://www.channld.com/distspec.html

Viewing location and resource details in iCal

Hi,
I'm trying to better understand the use of the ICal Server Utlity for creating shared resources and locations. I'm still a SLS Server user (no plan to migration to Lion server soon), and all my users are using Lion.
Simply put, I have rooms I'd like my users to reserve. I've created them in iCal Server Utility and I can see and reserve them in iCal, so that's fine.
However, the locations (and resources for that matter) have extra "metadata" such as address, map, location, capacity and even a picture. But I've seen no way to let my users visualize this information. Browsing the directory through Address book does not return any of my resources so all this metadata seems lost.
Is there a way to let my users access this info? For example, I'd expect my users to right-click the conference room in iCal and view the resources' details, but this clearly doesn't work... :-(
Have any of you resolved this? Is an extra application required for this, e.g. browse the metadata of Open Directory locations and resources?
Thanks.

Hello
If you are creating the orders using MRP, you should make sure that the field MRP is set to 1 on the source list. The field 'fixed vendor' is not relevant to MRP. When the vendor is selected from the source list, the purchasing organization should be also copied to the purchase requisition.
The storage location will be copied from the respective field on the material master tab MRP2.
Also take a look on the following document:
MRP: Vendor is not selected and general problems on source determination
BR
Caetano

Input record and view details

Similar Messages

Maybe you are looking for