Input values not saved in MRP 2 view

Hi Gurus,
we have a new new Z field called "Vendor material class" created in "MRP 2 view" as per the customer requirement . we maintained the values all the values via a Z transation code. but when you want to save a value for this filed in MM02 it is not getting saved and a message " No changes made" in our Production system.
but where are in our test box we were able to save the values. the program versions are same in both the systems. let me know if i am missing any congigurations for this field which saves the value in Production system.
appreciate your help on this.
Thanks,
Nagesh.

Hi Nagesh,
I think you may check the SAP note:
44410  Integrating cust.-specific fields in matl master
to see if you have done all the pre-requisition to correctly integrate your own fields in material master, then you may compare this between your test system and production system to see if you missed anything.
Regards,
Rachel

Similar Messages

  • ADF input label rendered but input value not

    I based my search page on SRDemo template. In the first panel where I enter search criteria I have the following:
    <af:panelBox>
    <af:panelForm>
    <af:inputText value="#{bindings.partialName.inputValue}"
    label="#{bindings.partialName.label}"
    required="#{bindings.partialName.mandatory}"
    columns="#{bindings.partialName.displayWidth}">
    <af:validator binding="#{bindings.partialName.validator}"/>
    </af:inputText>
    <f:facet name="footer">
    <af:panelButtonBar>
    <af:commandButton actionListener="#{bindings.queryProfiles.execute}"
    text="#{res['oysearch.searchLabel']}">
    <af:setActionListener from="#{false}"
    to="#{userState.oySearchFirstTime}"/>
    </af:commandButton>
    </af:panelButtonBar>
    </f:facet>
    </af:panelForm>
    <af:panelTip>
    <af:outputText value="#{res['oysearch.searchtip']}"/>
    </af:panelTip>
    </af:panelBox>
    but when I run the page I only get the input label shown and the Search button, but no Input Value (which is shown in the design view of the page)!?
    I checked the attributes and compared with SRDemo and it shows Rendered, mandatory etc.
    I have following in my page def file:
    <methodIterator id="queryProfilesIter"
    Binds="queryProfiles.result"
    DataControl="SearchProfileFacadeLocal"
    RangeSize="10"
    BeanClass="valueobjects.ProfileVO"
    RefreshCondition="${!userState.oySearchFirstTime}"/>
    <variableIterator id="variables">
    <variable Type="java.lang.String"
    Name="queryProfiles_partialName"
    IsQueriable="false"/>
    </variableIterator>
    <methodAction id="queryProfiles"
    MethodName="queryProfiles"
    RequiresUpdateModel="true" Action="999"
    IsViewObjectMethod="false"
    DataControl="SearchProfileFacadeLocal"
    InstanceName="SearchProfileFacadeLocal.dataProvider"
    ReturnName="SearchProfileFacadeLocal.methodResults.SearchProfileFacadeLocal_dataProvider_queryProfiles_result">
    <NamedData NDName="partialName" NDType="java.lang.String"
    NDValue="${bindings.queryProfiles_partialName}"/>
    </methodAction>
    <attributeValues id="partialName" IterBinding="variables">
    <AttrNames>
    <Item Value="queryProfiles_partialName"/>
    </AttrNames>
    </attributeValues>
    Why is the input value not shown on this ADF panel?
    thanks

    Hi,
    authorizing the page does not authorize all contained objects for better granularity in uthorization.
    Frank

  • Input textbox not working in Fullscreen view

    Hi,
    I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
    Please let me know how do enter the text in input textbox in fullscreen mode.
    Note: input textbox not work in fullscreen mode.
    Thanks
    Suresh

    Hello,
    I think your problem is very similiar to a problem that I had been suffering from a few days ago.
    I think that the below code should solve your problem:
    stage.scaleMode = StageScaleMode.NO_BORDER;
    Chinmaya

  • Workflow Form Issue - Form value not saved in WF container

    Problem, value in the form can not be available for the whole process.
    I created a data structure by SE11.
    In my workflow,
    Step 1: FORM change step, value can be entered.
    Step 2: FORM display step, no value from step one has been display. All fields are blank.
    I don't think I need binding because those value should be saved in workflow container after step 1, when you click save button.
    Am I missing anything(step or binding)?
    Thanks a lot.

    Is there a Business Object or Class associated with your form? If you are expecting the data to be available via the BObj or Class then you may have to refresh the Bobj or Class before displaying it. Alternately, make sure your method for changing it refreshes the obj and have the BusObj or Class bound coming back from Step 1 so that you get the updated object.
    If you're expecting to save the form data within the Workflow, you'll have to bind the data both to and from each step.
    Regards
    Mark

  • Settlement Receiver Value not Saved in Table Control Program

    Hi,
    I have Table control program regarding to Equipment Log, where in output it show the Equipment details with Account assignment category, General settlement receiver, Shift Hours, Work Hours, Idle Hrs, Maint. Hrs., Production Hours etc...
    In report, we have a formula i.e.
    Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    and all those fields are linked to each other.
    If we want that Work Hours should be 0, then msg showing - Working Hrs. should be entered. , means without enter Working Hrs. value we cann't save it.
    Now we removed the link of Working Hrs to others, means if we insert value 0 of Working Hrs., no msg showing. BUT Problem is this after remove this link, General settlement receiver value should not be saved.
    We want Work Hrs. as 0 value and General settlement receiver value must not be BLANK. It should be Saved.
    Plz guide..

    hi
    write a if statement after the Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    if work hours = 0, message i000 with 'Working Hrs. should be entered'.
    else ,write:/ shift hrs.end if. try to create a button for save when you click data will be saved or create a subrountine perform shift hrs than use if loop and select form end form inside keep Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    thanking you

  • Variant value not taken by the view

    Hello experts,
    I'm broadcasting a view, whose variant is dynamically changed through a process chain.
    But, during the broadcast, the view is not taking the latest value of the variant, instead it is taking the values, which was entered for the first time.
    The variant is changing the values every month.
    Please suggest on this
    Kind Regards,
    Ram

    Hi Ram,
    Please see below document, which explain very clearly how the variants can be changes dynamically ignore the part for filling cache.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4?QuickLink=index&overridelayout=true
    Regards,
    Ganesh

  • Custom fields values not saved in AUFK using bapi_alm_order_maintain

    Hi ,
        We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
    We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
    EXTENSION_IN
                STRUCTURE           =  CI_AUFK
                VALUEPART1        =  '20091223' .
    Please provide the solution.

    Hi Phani,
    May be these links are helpful:
    BAPI extention to work order aiming AUFK custom field filling
    Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
    Also search sdn using the BAPI function module, you may get some idea.
    Regards,
    Swarna Munukoti

  • Values not saved in "Global Authentication Setup" page

    Hi,
    I searched a bit in this forum but I couldn't find a related topic. So here is my problem.
    We are trying to deploy a small NAC lab environment. We use NAC Appliance v4.1.
    Now the problem is, that I like to set the values for PEAP and EAP-TLS in the "Global Authentication Setup" page. However, every time I press "Submit and restart" all checkboxes for PEAP and EAP-TLS are not checked anymore.
    I use a WebServer certificate from our PKI and I created it as described in various guides.
    If I create a self-signed certificate with ACS it works fine, but this will not be feasible for a larger deployment.
    I hope somebody knows this issue and can help me.
    Thanks,
    Harald

    I could solve my problem. I had to import the CA certificate in "ACS Certification Authority Setup".

  • REUSE checkbox values not saved after user-command

    Hi,
    I have an ALV grid using REUSE_ALV_GRID_DISPLAY within i have checkbox editable field. Initially all lines in the grid are checked. (user can deselect some of the lines)
    After display of ALV grid user deselect some of the lines in the grid and he press ENTER Here i am updating only checked data the alv grid data to a custom table.But my problem is user deselect some of lines in the gird and press ENTER, but the output table from the grid still showing all lines are checked. ie grid results not showing in the output table.
    Here is code
      data: pt_grpfcat      type slis_t_fieldcat_alv,
            ps_grpfcat      like line of pt_grpfcat,
            pt_grpself      type slis_selfield,
            pt_grplayout2   type slis_layout_alv,
            pv_grptitle(20) type c,
            p_grpexcltab2   type slis_t_extab with header line,
            p_header        type  slis_formname.
      ps_grpfcat-fieldname = 'BOX'.
      ps_grpfcat-checkbox  = c_x.
      ps_grpfcat-edit      = c_x.
      ps_grpfcat-seltext_m = text-272.
      ps_grpfcat-outputlen = 3.
      append ps_grpfcat to pt_grpfcat[].
      clear ps_grpfcat.
      ps_grpfcat-fieldname = 'WERKS'.
      ps_grpfcat-outputlen = 4.
      ps_grpfcat-seltext_m = 'Plants'.
      append ps_grpfcat to pt_grpfcat[].
      clear ps_grpfcat.
      ps_grpfcat-fieldname = 'NAME1'.
      ps_grpfcat-outputlen = 40.
      ps_grpfcat-seltext_m = 'Description'.
      append ps_grpfcat to pt_grpfcat[].
      clear ps_grpfcat.
      select * from t001w into table i_t001w_1.
      if p_plgrp ne c_gl.
        select * from yfe024 into table i_yfe024
                 where plgrp eq p_plgrp.
      else.
        select * from yfe024 into table i_yfe024
                 where plgrp ne space.
      endif.
      refresh : i_grpoutput. clear : i_grpoutput.
      pt_grplayout2-zebra = c_x.
      refresh i_events. clear i_events.
      if not i_yfe024[] is initial.
        loop at i_yfe024 into wa_yfe024.
          read table i_t001w_1 into wa_t001w_1
                      with key werks = wa_yfe024-werks.
          if sy-subrc eq 0.
            move : c_x            to i_grpoutput-box,
                   wa_t001w_1-werks to i_grpoutput-werks,
                   wa_t001w_1-name1 to i_grpoutput-name1.
            append i_grpoutput.
          endif.
        endloop.
      endif.
      pv_grptitle = text-t01.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          it_fieldcat                 = pt_grpfcat[]
          it_excluding                = p_grpexcltab2[]
          is_layout                   = pt_grplayout2
          i_callback_program          = sy-repid
          i_callback_html_top_of_page = p_header
          i_callback_pf_status_set    = v_status_set1
          i_callback_user_command     = v_user_command1
          i_screen_start_column       = 5
          i_screen_start_line         = 5
          i_screen_end_column         = 70
          i_screen_end_line           = 15
          it_events                   = i_events[]
        tables
          t_outtab                    = i_grpoutput.
    endform.                                 " F_f4_help_fieldname
    * Form  f_user_command1                                                *
    * This form will handle the user command from fm REUSE                 *
    form f_user_command1 using p_ucomm type sy-ucomm
                         rs_selfield type  slis_selfield.
      case p_ucomm.
        when 'YCNC'.
          leave to screen 0.
        when 'YNTR'.
          perform f_upload_readions.
          leave to screen 0.
      endcase.
    endform.                                 " F_user_command1
    * Form f_pf_status_set1                                                *
    * For setting PF status to REUSE                                       *
    form f_pf_status_set1 using rt_extab type slis_t_extab..
      set pf-status '9001'.
      set titlebar '9001' with v_plgrp.
    endform.                                 " F_pf_status_set1
    * Form f_upload_readions                                               *
    * For upload plants under regions to load into YSCCPLNT                *
    form f_upload_readions.
      if not i_grpoutput[] is initial.
        loop at i_grpoutput where box eq c_x.
          read table i_ysccplnttemp with key werks = i_grpoutput-werks
                                             updkz = space.
          if sy-subrc ne 0.
            move i_grpoutput-werks to i_ysccplnttemp-werks.
            move v_affind          to i_ysccplnttemp-affind.
            append i_ysccplnttemp. clear i_ysccplnttemp.
          endif.
        endloop.
      endif.
    endform.                                 " F_upload_readions
    Any suggestions?
    Thanks
    aRs

    form f_user_command1 using p_ucomm type sy-ucomm
                         rs_selfield type  slis_selfield.
    <b>Data ref1 type ref to cl_gui_alv_grid.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
    E_GRID = ref1.
    call method ref1->check_changed_data</b>
      case p_ucomm.
        when 'YCNC'.
          leave to screen 0.
        when 'YNTR'.
          perform f_upload_readions.
          leave to screen 0.
      endcase.
    endform.

  • Is it possible to add more input values for a payroll element?

    Hi All
    I have created an element with 1 default input value 'pay value' and another input value '1xx1'. I have linked this to payroll and attached to many employees. Now due to business requirment, I need to add one more input value '2yy2' and also I need to change the formula. Eventhough its a minor change in formula, without a new input value it will not work. I tried to add a new one by datetracking to the element creation date without sucess.
    Is it possible to add input values after saving an element?
    Regards
    Rahman

    You can Change the Required Input Value to Not-required
    Alter the Sequence of the Input Value to be displayed in the Element Entry Screen
    You can Change the Input Value Validation Rule minimum, Maximum, Lookup and Formula
    Change your specification of which input values create Database Items. Note, however, you cannot remove Database Items if they are used in any formulas or QuickPaint reports.
    You cannot remove existing input values or add new one if you have created any entries for the element
    For more details you can refer http://ramesh-oraclehrms.blogspot.com/2007/08/maintaining-element.html

  • ADF Table filter issue with OR or AND input value

    Hi all,
    adf:table filterable fields for OR or AND input value not works. Actually One of column is for State and it has "OR" value for -> OREGON State.
    and I tried using filterModel and queryListener for table attribute. But I am not getting exact clue where I need to fix for this issue. Any suggestion and help is appreciated greatly.
    jdev version 11.1.1.3
    Thank you.
    - Robin

    Something like this might work for the one case:
    public void handleQuery(QueryEvent queryEvent){
        // Replace the OR with an equivalent condition
        Map m =
          ((FilterableQueryDescriptor) (queryEvent.getDescriptor())).getFilterCriteria();
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(), "OR"))
            entry.setValue("O AND _R");
        // Process The Query
        ELUtils.invokeMethod("#{bindings.VOQuery.processQuery}",
                             QueryEvent.class, queryEvent);
        // Put the OR back
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(),
                                           "O AND _R"))
            entry.setValue("OR");
    }

  • Maintaining a component without MRP view in a BOM

    Good Day everyone!
    Can i set the system so that it gives me an error or warning message that the component i am maintaining in a BOM does not have an MRP views yet?

    Reden Manguerra ,
    in standard SAP its not possible. may be plant specific material status can help up to ceratin extent to check material with category L in BOM is doesnt have relevant status release for engineering.
    you need to check this.
    or
    you need to develop this function your self.
    Regards
    Ritesh
    Edited by: R S D on Jun 19, 2009 2:28 PM

  • H:datatable not saving input values

    Hi
    I've got a page with h:datatable and some other inputs. I've few actions that reload this page. What my problem is that inputs from datatable are not saved - when the page is reloaded the fields are empty, checkboxes reset to unchecked etc. But other inputs, outside the datatable remember their values. Is there any way to make datatable inputs behave like other components?
    Michael

    Could you explain this:
    "2.dataTable's data should not be binded to backing-bean's properties! "
    You mean I can't put input component in there? e.g. I've got datable with rows for different languages, and in one column I have input where I put name of sth in this language. Then I press submit and it's saved into db. Works fine...

  • How to get the values inputted by the user in Classification view of  MM02

    Hello,
    Does anyone know how to get the inputted values in Classification view of MM02/MM01? I tried to use CLAF_CLASSIFICATION_OF_OBJECTS but this gets the values that is currently saved in the tables and not the values that the user recently inputted in the screen.
    Regards,
    Alfred

    hi
    try this...
    How to Display the Batch Characteristics in BOM?

  • Material Master MRP View not be created till Basiv View is created

    Hello All,
    I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
    Thanks for your inputs.
    Ismail

    Dear Syed ,
    If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
    Hope this can help you.
    Please let me know if my thinking about your question is correct.
    best regards,
    Carlos Moçatto

Maybe you are looking for