Material Master MRP View not be created till Basiv View is created

Hello All,
I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
Thanks for your inputs.
Ismail

Dear Syed ,
If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
Hope this can help you.
Please let me know if my thinking about your question is correct.
best regards,
Carlos Moçatto

Similar Messages

  • Material Master changes are not allowing (MM02)

    Dear All,
    we have done year end activities successfully for the 2010 fiscal year. we are following January to December. In 2011 January 9th date we have activated Material ledger. after that when we try to go to material master the system is giving this error.
    "Currency was not defined at production startup
    Message no. C+040
    Diagnosis
    You have set the material ledger to productive in valuatione area DEL1. Nevertheless, information about the currency settings at the time of production startup are missing.
    System Response
    The system cannot ensure data consistency, since it is not possible to compare the current currency settings with those made at production startup.
    Procedure
    1. Make sure that the currency settings have not been changed since material ledger production startup in valuation area DEL1.
    2. Inform your system administrator."
    Even when I try to create the new material master it is showing the same error.
    Could anybody guide me how to solve this.
    Thanks and regards,
    Mr.Rao

    Hi Mr Rao ,
    Your ML currency settings are incorrect .. which is causing the issue..
    A . Have you checked the following notes which give a detailed information about Material Ledger activation: 596558 Material ledger production startup 384145 Advice note on material ledger production startup 165844 Material ledger production startup Please, check attached note 596558, which provides recommendations on Material Ledger production startup: ...before ML activation .. i hope not ..
    B Always activate the material ledger for a complete company code and copy all currencies from FI. This is the only way to ensure the reconciliation with FI. c) In addition, it is recommended that you activate the material ledger for a complete company code because the invoice verification can neither store invoices that contain materials from plants the material ledgers of which are active nor more materials from plants the material ledger of which is not active. ... Please, consider that only transactions performed after the startup will be taken into account for the actual price calculation.
    C .Now to correct it .. you have to deactive ML and correct the currencies and then re-activate ML . Have a look into SAP  : Note 53947 - Changing currencies after production startup.  Now , are e the actual activities now posted and production is active .. if yes .. the deactivating ML is a pain.
    D .If the Material ledger is already set to u201CProductiveu201D, run the report SAPRCKMJX using SE38. This report should only be run in Development or Testing environment. It is not recommended to be used in Production. It may be used in case there is no activity in the plant (no stock, no movements have happened ever). SAP recommends use of their CO-PC development support for this (OSS Note 108374).
    Please revert back for any further clarifications
    Regards
    Sarada

  • Customer & Material Master data is not saved in SAP 4.7

    Hi All,
    We created a customer in T code XD01 and saved it. system threw a message that "customer 500001 has been saved" but when I tried to check the customer ID 500001 in XD02 and XD03, it says custoemr 500001 has not been created.
    I have checked in table KNA1, KNB1 & KNVV. No data is available in these tables.
    Same case with material master data even.
    Can anyone please tell me what could be the reason for this problem & how to fix it.
    Thanks in advance.
    JM

    Dear JM,
    Goto SNRO- Enter the number range object & click on "Change " icon.
    NR Object: DEBITOR
    Check whether any value maintained in "No. of numbers in buffer",  make it blank & re-create customer.
    It may not be exact route cause of the problem, but could be the reason .
    Test & update the forum.
    Regards,
    Reazuddin MD

  • Delet Material Master Record but not the range

    HI experts,
    I have more material master records in production data base; now i need to delete them but at the same time don't remove the range numbering.
    I.E.
    there are 10 master record with range number from 1 to 10.
    now, deleting these 10 master records, i would like to avoid that the numbering starts from 11.
    thanks in advance
    C.

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Code view not in synch with Design view (Dreamweaver CS3)

    Hello All,
    On my main work PC, I am running Dreamweaver CS3. When I am
    working in split view (with both Design and Code view visible) when
    I click on an element (say, a button) in Design view, the code view
    automatically shows me the code for the element that I am working
    on. That way, if I need to manually edit the code, I can click on
    the Code view and make the appropriate changes.
    On my laptop I am also running Dreamweaver CS3 However, when
    I am working in split view and I click on a element in Design view,
    my code view does NOT update itself and continues to show the last
    bit of code I was working on in Code view. While this could come in
    handy at times where i want design view and code view to show me
    two different things, I mostly would like code view to update
    automatically. Currently the only way I can get code view to update
    on my laptop is to hit the "refresh design view (F5)" button. Is
    there a way to do this automatically? Is this an option in
    Dreamweaver preferences because I don't see it anywhere.
    Thanks so much for your help.

    Ethereal_Mike wrote:
    > Does the new version of Dreamweaver CS3 print the code
    in color?
    No. If you feel that it's an important enhancement that you
    would like
    to see in future versions, submit a feature request:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    The more people who request a specific feature, the more
    likely it is to
    be implemented.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Design view not the same as live view

    My design view is totally different the IE view or live view
    in cs4, I read a thread that you have to basically live with it?
    I hope this is not true, can anybody confirm?
    Thx
    Brad

    You can see the IE result at http://www.spaline.ca/dreamweaver/
    and I ahve attached a screen shot in a pdf.
    I do not know what else i can say at this point
    Thx
    Brad

  • Material master - batch management not consistence with mara-xchpf

    Dear Experts:
       We have a problem that the user created a new material and only created Basic Data/Accounting/Costing View, inside these views there is no "check field" about "Batch management" but in table both of MARA / MARC  the field XCHPF has value 'X' (checked).
    in our system, there are 2 material no. has the same situation.
    My question is why and how the field "batch management" has been checked and how can we remove it if there is no stocks, no open Doc and no any other transaction??
    Thanks a lot.
    SAP ECC 6.0

    Hi Jürgen L.
    Thanks again.
      The problem is that we can't change the field "batch management", the material no. we have DOES NOT have Batch No., NO stock, the only docments we have are one PR and one PO, and all of them has the status deleted.
      And I had tried to created a new material no. in our QAS, what we did to this new material no. is:
    1. Use MM01 to created  "Basic data 1" view refer to a "batch management" Material no. - Only Basic data 1 view and click save, nothing else.
    2. Use MM01 again to create "General Plant data/Storage 1" view, but the field "Batch Management" is checked and unchangeable, I think this is not reasonable,  and I dont know is there any other way I can change "batch management".
      thanks.
    Last update :
    The issue is resolved:
       2. Use MM01 again to create "General Plant data/Storage 1" view ,( the field "Batch Management" is checked and unchangeable), save material no.
      3. Use MM02 to change "Batch management", now the field "batch management" is changeable.
    Thanks you all
    Edited by: KMateo on Apr 22, 2010 9:49 AM
    Edited by: KMateo on Apr 26, 2010 5:59 AM

  • Process will not be created with zero standard prices in material master

    Hi,
    I have two type of material;
    1.     In process material say A1
    2.     Finished Goods say B1
    Both materials price control are standard price.  I do not run costing. So , after creation of material master , standerd price has to update through MR21 in the account1 tab before start production .
    Suppose, if I forget to update standard price in material master and prepared process order, it will carry zero value of production cost.
    Hence, I want to restrict the creation of process order with zero standard prices in the material master.
    In order words, as long as standard price will not be updated after creation of the material master, user will not be allowed to create process order, if wrongly try, system will give message u201Cwith zero standard price creation of process order will not be allowedu201D.
    Please let me know either standard configuration or name of User exit or Badi.
    Regards,
    Amit

    Hi,
    You need to use BADI: workorder_update.
    Method: At release.
    check MBEW-STPRS field in the code ..and flag error and reject error if STPRS = 0.
    Regards,
    Santosh Sarda

  • Shelf life view not coming in material master

    Hi,
      I have one issue, we want to create some material with shelf life  as per presernt setting  in OMT3E  it is as below
    01     *     *     *     T1                             
    01     *     HAWA     M     21     Std ind.(short) tab pages
    01     *     HERS     *     T1                             
    01     *     LEER     *     BE     Std Ind Tabs for Empties
    03     *     *     *     23     Std retail: tab pages
    03     *     COUP     *     R1     Retail Coupons
    03     *     PLAN     *     R2     Retail Articles (Planned)
    i have check in the transaction for the first screen sequence  T1 is not present in our system but in OMT3E  i am not getting any error msg.  then i hva echeck for screen sequence 21  in this the shelf life fields are there in the OMT3  transaction ,  but when i am creating material master  I am not getting shelf life fields in material master I have also check in MM01 debugging in the field it is T1 in the field V_T133S-REIHF-BILDS, but this screen sequence is not present in OMT3  so in which screen sequence i have to do the required modfication so that the shelf life field will come in the material master.
    regards,
    zafar
    Edited by: zafar karnalkar on Jul 4, 2011 2:06 PM

    Are you in a ERP system or in a industry solution?
    is it a standard material type like ROH and FERT, or a customized own material type?
    I have rarely been im OMT3, which I usally need to do when adding own subscreens with Z.fields.
    You are talking about standard SAP fields, so the screen sequence should not really be the place to check.
    I think it is pure customizing of field selection.
    What is your material type?, what is its industry, what is the transaction you use for maintenance?

  • Costing error while change mrp data in material master

    Hi dears,
    This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
    system not allow to change and show the error as
    Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
    i need to change the mrp data in mm02 and i donot want to do delete the pcc .
    any process to carryover
    thanks
    Edited by: raj on May 24, 2010 12:22 PM

    Hi,
    MRP is mainly configured for a material so that tere would not be any need for manual checking of the stock so as to create a PR. 
    The parameters which you have specified for a particular material like reorder point and lot size will help in planning for a particular material.
    If you need only Qty of two (Less) then  there s no need of configuring a MRP for that material
    And lot size is also decided basing on certain other factors like
    1) Lead time
    2) Transportation costs involved in procuring the material etc
    So ifyou want to generate PR for a qty of 100 then you need ot change the lot size
    I hope this gives you clarity
    Thanks & Regards
    Pavan

  • Material Master change with MRP profile

    Has anyone tried to change material master MRP view by assigning new MRP profile?
    I do not understand why the field value is not updating if the MRP profile field is defined as default but if it is define as fixed value, it is updating in MM02-assign new MRP profile.
    thanks

    Thanks Vijay,
    I've tried to change material master MRP1 view with MM02-Edit-MRP Profile.  If I assign a new profile where values are set to fixed value, it is updating the fields and only another MRP profile update will allow change to that field.
    It is not updating the fields if you assign a new MRP profile where values in the MRP profile are set to default. I'm thinking it should still update the field value and at the same that field can still be change in manual MM02 transaction.
    Regards,

  • Changes in Material Master leading to issues in MRP

    Hi,
    For a particular material a user changed a lot of material master data (MRP1 and MRP2 view) within a couple of hours.
    As a result MRP is not working as we would expect:
    - some orders have no quantity in the "Available quantity" column in MD04 and as a result do not trigger any PO (Received/Required quantity = -1, but Av qty = blank)
    - whenever a shipment is foreseen it is consumed/reserved by/for the order which requested delivery date is closest after that shipment date
    These are the changes made to the master data in November 2009:
    Planning Strategy Group: from Make-To-Stock Production to No Planning to Strategy Group for Spares & Consumables to No Planning to Strategy Group for Spares & Consumables
    MRP Group: from Client Specific MRP Group for Period Mgmt to General to External Procurement to Client Specific MRP Group for Period Mgmt to General to Client Specific MRP Group for Period Mgmt
    Availabilty Check: from Indiv. Req. to Indiv. Req w/o PO. to Indiv. Req.
    Unplanned Consumption in period: from blank to 11.2009
    Fwd Consumption Period: from 0 to 999 to 0
    Consumption Mode: from blank to Forward Consumption Only to blank
    Unchanged MRP material master data:
    Bwd Consumption Period: 0
    MRP type: MRP
    Planning Time Fence: 1
    Lot size: WB (weekly lot size)
    Procurement type: External Procurement
    Backflush: always backflush
    What should we do to have MRP work correctly again for this material?
    Changes to material master MRP? Delete all schedule lines and start from scratch in SOs?
    All help is much appreciated!
    Best regards,
    Geert
    Edited by: Geert P on Dec 10, 2009 6:08 PM
    Edited by: Geert P on Dec 14, 2009 4:04 PM

    Solved internally by adjusting Strategy Group

  • Material master -costing view 1 & 2

    Hi
    Some users could not able to view the costing 1 & 2 screens in material master
    Thanks
    Madhav

    Hi,
    That is either because the views have not been created for those materials (Use MM01 to create them for the existing materials) or the views have not been "switched on" in config for the material type being used.
    Steve B

  • Significance of purchasing view in Material master

    Hi,
    What is the significance of purchasing view in Material master.
    What could be effect if this view is not maintained?
    Like for material type FERT there is no Purchasing view, but we can do procurement for FERT items.
    So what is the significance of purchasing view in Material master?
    Uts

    Hi,
    I cant Agree your statement,because for the Purchasing Activities it is mandatory that you Maintain the Purchasing view of the Material.
    it Gives a error ..material not maintained by Purchasing.
    Material XXXXXX not maintained by Purchasing
    Message no. ME046
    For Inhouse Production through Quota arrangement,it can be optional.
    but for the remaining cases ,it is Mandatory.
    and the Material type your are speaking is FERT.which is standard material type for Finished products.
    if you are having External Procuremnt 100% sure it would be having Purchasing Tab activated .
    if not so that,if it is a inhouse production.
    check it in OMS2 ..for clear information
    Regards
    Anjanna.

  • How to create material group in material master.

    hi guru's
    can anybody explain me how to create a new material group in material master.
    i wantto add a material group while creating material master MM01..
    thanks
    sap-mm

    Hi,
    In this step you create material groups.
    You also have the option of using the same transaction to carry out the following activities:
    Creating superior hierarchy levels
    Assigning the superior hierarchy levels to a material group hierarchy
    Assigning the base material group to the material group hierarchy
    Assigning characteristics profiles below material group level
    Requirements
    Your R/3 System is configured as an SAP Retail System.
    Activities
    1. Create superior hierarchy levels
       You create hierarchy levels using transaction WG01 (creating
       material groups) via menu options MG environment --> Hierarchy
       level --> Create
    2. Assign the superior hierarchy levels to a material group hierarchy
       You assign hierarchy levels to a hierarchy using transaction WG01
       (creating material groups) via menu options MG environment -->
       Hierarchy level --> Maint. MG hierarchy
    3. Create material groups (base material groups) and then maintain the
       pre-defined materials (reference material/material group material)
    4. Assign the base material group to the material group hierarchy
       You assign the material group to the hierarchy using transaction
       WG01 (creating material groups)
    5. Assign characteristics profiles below material group level
       You assign characteristics profiles using transaction WG01
       (creating material groups)
    Further notes
    When creating material groups and then maintaining the pre-defined materials (reference material/material group material) you should be aware of the following.
    As these materials can be created automatically using a minimum of data, you should follow this procedure with a check and possibly further maintenance, especially of plant-specific data. The material group reference material should be defined in as much detail as possible so as to keep the workload to a minimum when you have to create more materials for this material group.
    All hierarchy allocations involving a material group (base material group) and a higher or lower hierarchy level can be carried out on the initial screen (there is no need to switch to the detail screen). All further hierarchy allocations can be defined top-down when you maintain material group hierarchies.
    Only the material groups are transported automatically!
    Reward if useful.
    Chandru

Maybe you are looking for