Inputs return minimum value

I have RTX, DDK and a PCI-6254
I've managed to get the interupts to work fine, it fills the FIFO and I an read the data back from the fifo via port commands, however, the data all returns either 0 or -32768 depending on which polarity I have selected. Any ideas why this would happen?
P.s.
Other technical info:
I have a 5v reference voltage applied to the connector block from its own 5v pin. The AI-Sense is set to 0v from the AI-GND pin. This has been checked with a standard volt meter so the connector is making good contact with the card otherwise it would not give 5v. Secondly I read from all 32 channels which all return the same value. Ive loaded the calibration data correctly and manual testing shows that the calibration data maps very well to my voltage range (-+ 10v) and all 16bits.
Any ideas?
Thanks
John

Hi DiegoF
        Thank you for your infomation!
        I'm Get the problem when use RTX,DDK,PCI6259 do AI job. I got the random value when I acq. a value using "aiex1.cpp" . If i active the adcret() function,i got the same small error value. That confused me all night.
        when i modify the code as you say,all right .
       Thank u.
     su
帖子被eastf在04-28-2007 09:25 AM时编辑过了

Similar Messages

Error while setting Minimum value to Input Number Spin Box..

Hai
I drag and drop a VO and created a table.In that table,i convert a column which contain an InputText field to Input Number Spin Box.At the time of page load ,the table fetches the datas from the DataBase and showing Number values in the SpinBox.After that,When i scroll the table through vertical scrollBar,the table showing *"fetching data"* and Error is throwing as *"The value must be Number"* .. In the VO,this attribute is Number.
THIS ERROR ONLY OCCURS when i set the Minimum value of spinBox ..The purpose of setting minimum value is that i only want user to select ve value only..How can i restrict the user for selecting only ve values..?(ie,*How can i set minimum value to SpinBox?)*

Try changing the datatype of your attribute in the EO to be Double instead of Number.

PARTITION BY ? Return an ID based on the minimum value of another column

Hi guys
I want to return the ID column of a row, where 2 other columns = a set value, and a 3rd column has the minimum value matching the other criteria.
so in effect :
with t as (
select 1 dst_id, 'abc' dst_title, 1 edition_from, 1 media_item from dual
union all
select 2 dst_id, 'abc' dst_title, 1 edition_from, 2 media_item from dual
union all
select 3 dst_id, 'abc' dst_title, 2 edition_from, 1 media_item from dual
union all
select 4 dst_id, 'abc' dst_title, 2 edition_from, 2 media_item from dual
union all
select 5 dst_id, 'def' dst_title, 1 edition_from, 1 media_item from dual
union all
select 6 dst_id, 'def' dst_title, 1 edition_from, 2 media_item from dual
select dst_id
from t
where dst_title = 'abc'
and edition_from = 1
and media_item = minimum value of media item using above where clauseWould return dst_id = 1 because it has the minimum media item value of 1 where dst_title = abc and edition_from = 1
Can this be done in 1 query ? I've been trying it using partition by and over dst_title, edition_from but that doesn't work.
I'm currently doing it using a sub query or 2 queries, but thought there must be a way to do it in one ?
Thanks all
Scott

Like this?
SQL> with t as (
2 select 1 dst_id, 'abc' dst_title, 1 edition_from, 1 media_item from dual
3 union all
4 select 2 dst_id, 'abc' dst_title, 1 edition_from, 2 media_item from dual
5 union all
6 select 3 dst_id, 'abc' dst_title, 2 edition_from, 1 media_item from dual
7 union all
8 select 4 dst_id, 'abc' dst_title, 2 edition_from, 2 media_item from dual
9 union all
10 select 5 dst_id, 'def' dst_title, 1 edition_from, 1 media_item from dual
11 union all
12 select 6 dst_id, 'def' dst_title, 1 edition_from, 2 media_item from dual
13 )
14 select dst_id
15 from (select t.*
16        ,      row_number() over (partition by dst_title, edition_from order by media_item) rn
17        from   t
18        where dst_title = 'abc'
19        and    edition_from = 1)
20 where rn = 1;
    DST_ID
         1
SQL>

Need right value to Load/Read Velocity Using Input/Return Vectors

I have a servo motor with a encoder feedback of ( 4,000 counts per revolution ), maximum velocity of 6,000 rpm ( 100 rps ). I need to create 3 moving profiles with stroke time of 0.25 mm/sec, 1.0 mm/sec, and 25 mm/sec. I would like to use either Load Velocity VI or Load Velocity in RPM VI whichever is easy to set velocity, distance, and read position of my axis. More, I would like to be able to use onboard variables to set distance, velocity, and read position of the axis using input/return vectors, but I don't know how to set the right values. Do I need a conversion or multiplier number to get the right value?
Any help would be greatly appreciated.
Carlos D' Garcia.

Carols –
There is a simple vi on how to do vector moves at the following link (I also attached the file below):
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DF9956A4E034080020E74861&p_node=DZ52480&p_source=External
To have your axes move at different rates, you will have to replace the single ‘Load Velocity in RPM.vi’ that is wired to the Configure Vector Space.flx with three separate Load Velocity RPM.vi’s each with an axis constant (or control) wired to their axis input and the max velocity you want. This way, you will set the maximum velocity for each axis rather than all three at once.
Best of luck with your project! Let me know if you have further questions with this.
Marc C
National Instruments
Applications Engineer
Attachments:
Three-Axis_Vector_Move_with_Position_Monitor.zip ‏29 KB

How to return a value from a textbox input?

I'm having trouble writing code to return a value (e.g. mytextbox.value) from a textbox for a function calculation. The textbox is defined within a Group (e.g. mygroup) which is contained within the scene and stage (e.g. mystage). The compiler objects to "mystage.scene.mygroup.mytextbox.value" with "can't find symbol."
What is the correct syntax for returning a texbox value? Is there a way to do this without using "bind with inverse"?

You will need to hold the instance of your TextBox. Try something like that:
var myTextBox: TextBox;
Group {
     content: [
          myTextBox = TextBox {
function doSomethingWithText() {
    println("this text variable is updated just when textBox loses the focus: {myTextBox.text}");
    println("this rawText variable is updated in realtime (including when user is typing): {myTextBox.rawText}");
}

How to create custom search box will allow up to 60 alphanumericcharacters & User can input a minimum of 1 character and the system will pull back an exact match on the sequence entered.

Hi,
Can anyone please help me in creating the Custom Search box with below mentioned functionality
"The search box will allow up to 60 alphanumeric characters.User can input a minimum of 1 character and the system will pull back an exact match on the sequence entered"

Hi Pradeep,
Find the complete JQuery AutoComplete function with along with different events in it like focus, select, open and close. You can modify this code as per your requirement.
$("#ddlSearchTextBox").autocomplete({
source: function (request, response) {
var getUrl = "<site URL>";
$.ajax({
url: getUrl,
type: "GET",
contentType: "application/json; charset=utf-8",
dataType: "json",
data: {
featureClass: "P",
style: "full",
maxRows: 10
dataFilter: function (data, type) {
return data.replace(/\\'/g, "'");
success: function (data) {
response($.map(data.d, function (result) {
return {
label: result.Last_Name + ", " + result.First_Name,
value: result.id
focus: function (event, ui) {
$("#ddlSearchTextBox").val(ui.item.label);
return false;
minLength: 1,
select: function (event, ui) {
$("#ddlSearchTextBox").val(ui.item.label);
return false;
open: function () {
$("#ddlSearchTextBox").removeClass("ui-corner-all").addClass("ui-corner-top");
close: function () {
$("#ddlSearchTextBox").removeClass("ui-corner-top").addClass("ui-corner-all");
Let us know if you need any further.
Thanks, Shakir | Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

Return multiple values from a method

For a school project I have to make a parameter-less constructor that can input values from the keyboard and calculate those values. Now that I have the values how do I return them? I need to return 3 values from this parameter-less method.
I hoope someone can help.

Qwertyfshag wrote:
Here is the wording of the assignment. I have copied and pasted it word for word:
"Declare and use a no-argument (or "parameter-less") constructor to input the data needed, and to do the calculations."
Any advice???Find a teacher who isn't an idiot. That sentence is vague ("to input the data needed"? Does that mean that it's supposed to query the user (which is terrible) or that it's supposed to encapsulate the data as hardcoded values, or what?) and is a bad design. Constructors shouldn't do this sort of thing.
Ok I have done that part and now I want to retrieve the values of the calculations. How can I get those values out of that method What do you mean "that method"? Constructors aren't methods, and they don't return values.
I suppose you could define a class whose constructor queries the user, and which would have a method to return values. That could be pretty simple; the method signature would be like this:
Set<Integer> getValues();
This seems like an advanced problem.It's not advanced; it's just garbage.
I can't post the code in hear because that may constitute cheating. I am allowed to discuss it verbally but I cannot share code, sorry.You can't get a lot of help then. We can't psychically see what you've done so far.
In conclusion: I have to have two methods. One method is a constructorConstructors aren't methods. If your teacher told you that they are, then he/she doesn't know what he/she is doing.
that has NO parameters that will get input from the keyboard (done) and do the calculations (done). The other method must print that values to the screen on separate lines (not done). I don't know how to get the values out of the method.If they're two methods in the same class, then the constructor just needs to store the user input into a field of the class, and the other method can read the values in that field.

How can I return some values from an applet invoked by jsp:plugin tag

My JSP is something like that:
<html>
     <head>
             <title> . . . </title>
     </head>
     <script>
          function getValueFromApplet()
               var src = document.pinApplet.checkPin();
               document.myForm.j_username.value = document.pinApplet.tokenizeName(src);
               alert(document.myForm.j_username.value);
               document.myForm.j_password.value = document.pinApplet.tokenizePassword(src);
               alert(document.myForm.j_password.value);
     </script>
        <body>
                <jsp:plugin type="applet"
                      code="PinApplet.class"
                   codebase="/idp"
                   name="pinApplet"
                            width="300"
                            height="300">
                     <jsp:fallback> Authentication Form is not supported by the browser </jsp:fallback>
          </jsp:plugin>
                <form action="https://xxx.xxx.xxx"
               name="myForm"
               method="post" onSubmit="return getValueFromApplet()">
          <table>
               <td><input type="submit" value="OK" >
               <td><input type="hidden" id="j_username" name="j_username" value=""></td>
               <td><input type="hidden" id="j_password" name="j_password" value=""></td>
          </table>
          </form>
     </body>checkPin() returns "alice--alice"
tokenizeName() returns the first token: alice
tokenizePassword() returns the second token: alice
When I test the applet in the IDE, it returns the values properly, but not in the JSP invokation.

evnafets wrote:
javascript will not be executing on the server. You can rule that one out.
Is your Applet being initialised correctly?
Where have you got the classes for it? I think the applet doesn't need any kind of initialization, because it doesn't have any variables and all the process is made in the method called by onsubmit()
The applet is composed only by one class and I'm totally sure that the class is placed in the correct place.
evnafets wrote:
I would say put in a couple more alerts - one before the call to the applet, one after.
put some logging statements in your applet to see if it gets there.In the javascript, there are two alerts between the three calls to the applet. Where do you advise me to put more alerts?
I don't understand what do you refer when you say "logging statements"
I am going to test again the call to the applet in order to find some kind of code that can be invalid or that can make the function to "crash"

How to get all minimum values for a table of unique records?

I need to get the list of minimum value records for a table which has the below structure and data
create table emp (name varchar2(50),org varchar2(50),desig varchar2(50),salary number(10),year number(10));
insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',3000,2005);
insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',4000,2007);
insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2007);
insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2008);
insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2010);
commit;
SELECT e.name,e.org,e.desig,min(e.year) FROM emp e,(
SELECT e1.name,e1.org,e1.desig,e1.salary FROM emp e1
GROUP BY (e1.name,e1.org,e1.desig,e1.salary)
HAVING COUNT(*) >1) min_query
WHERE min_query.name = e.name AND min_query.org = e.org AND min_query.desig =e.desig
AND min_query.salary = e.salary
group by (e.name,e.org,e.desig);With the above query i can get the least value year where the emp has maximum salary. It will return only one record. But i want to all the records which are minimum compare to the max year value
Required output
emp1     org1     mgr     7000     2008
emp1     org1     mgr     7000     2007Please help me with this..

Frank,
Can I write the query like this in case of duplicates?
Definitely there would have been a better way than the query I've written.
WITH      got_analytics     AS
     SELECT     name, org, desig, salary, year
     ,     MAX (SALARY) OVER ( PARTITION BY NAME, ORG, DESIG)          AS MAX_SALARY
     ,     ROW_NUMBER () OVER ( PARTITION BY NAME, ORG, DESIG, SALARY
                                ORDER BY        year DESC
                       )                              AS YEAR_NUM
     FROM    (SELECT 'emp1' AS NAME, 'org1' AS ORG, 'mgr' AS DESIG, 3000 AS SALARY, 2005 AS YEAR FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',4000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',4000,2008 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2008 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2010 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2010 FROM DUAL)
SELECT     name, org, desig, salary, year
FROM     got_analytics
WHERE     salary          = max_salary
AND     YEAR_NUM     > 1
Result:
emp1     org1     mgr     7000     2010
emp1     org1     mgr     7000     2008
emp1     org1     mgr     7000     2007
emp1     org1     mgr     7000     2007
WITH      got_analytics     AS
     SELECT     name, org, desig, salary, year
     ,     MAX (SALARY) OVER ( PARTITION BY NAME, ORG, DESIG)          AS MAX_SALARY
     ,     ROW_NUMBER () OVER ( PARTITION BY NAME, ORG, DESIG, SALARY
                                ORDER BY        year DESC
                       )                              AS YEAR_NUM
,     ROW_NUMBER () OVER ( PARTITION BY NAME, ORG, DESIG, SALARY, Year
                                ORDER BY        YEAR DESC
                       )                              AS year_num2
     FROM    (SELECT 'emp1' AS NAME, 'org1' AS ORG, 'mgr' AS DESIG, 3000 AS SALARY, 2005 AS YEAR FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',4000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',4000,2008 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2007 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2008 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2010 FROM DUAL UNION ALL
SELECT 'emp1','org1','mgr',7000,2010 FROM DUAL)
SELECT     name, org, desig, salary, year
FROM     got_analytics
WHERE     salary          = max_salary
AND     YEAR_NUM     > 1
AND YEAR_NUM2 < 2
Result:
emp1     org1     mgr     7000     2008
emp1     org1     mgr     7000     2007

Finding a minimum value in an array without using loops

I can find a minimum value in an array using a loop, but I am unsure of how to do it without any type of of loop
Here is what I have using a loop:
// This method searches for the minimum value in an array
public static int min(int a[]){
int min = a[0];
for(int i = 1; i < a.length; i++){
if(a[i] < min){
min = a;
return min;
How do I covert this to do the same thing, using no loops?
Thank you for replies
Edited by: kazmania on Feb 7, 2008 12:26 PM

public class Test112 {
public int recurse(int[] x, int i, int n)
if (i==x.length-1) { return (x[i] < n) ? x[i] : n; }
n = (n < x[++i]) ? n : x;
return recurse(x, i, n);
public static void main(String[] args) {
int[] nums = {3, 1, 56, 2, 99, 34, 5, 78, -400, 2383, 201, -9, -450};
Test112 t = new Test112();
int min = t.recurse(nums, 0, nums[0]);
System.out.println(min);

'F4IF_INT_TABLE_VALUE_REQUEST' is not returning any value when selecting da

*Hello Guys.*
*I hv inserted search help in an field of screen exit in T-code IW21. Its showing value properly when i press f4 but when selecting value its nt returning any value properly....*
*I am pasting code ..please help me out*
*. Process of value Request*
*field <fieldname> module F4_AGENCY*
*MODULE F4_AGENCY INPUT.*
*DATA: IT_AGENCY TYPE TABLE OF ZF4_AGENCY WITH HEADER LINE,*
        *it_FIELD_TAB      type table of DFIES WITH HEADER LINE,*
        *IT_DDSHRETVAL TYPE TABLE OF DDSHRETVAL WITH HEADER LINE.*
*REFRESH : IT_AGENCY[].*
*clear : VIQMEL-ZZAGENCY.*
**SELECT * FROM ZF4_AGENCY INTO TABLE IT_AGENCY.**
*CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'*
    *EXPORTING*
DDIC_STRUCTURE           = 'ZF4_AGENCY'**
      *RETFIELD               = 'ZZAGENCY'*
    PVALKEY                 = ' '**
     *DYNPPROG                = sy-cprog "'SAPLXQQM'*
     *DYNPNR                  = sy-dynnr   "'0101'*
     *DYNPROFIELD             = 'VIQMEL-ZZAGENCY'*
    STEPL                  = sy-stepl**
     *VALUE_ORG               = 'S'*
   *TABLES*
    *VALUE_TAB              = IT_AGENCY[]*
    *FIELD_TAB              = it_FIELD_TAB[]*
    *RETURN_TAB             = IT_DDSHRETVAL[]*
DYNPFLD_MAPPING        =**
EXCEPTIONS**
PARAMETER_ERROR        = 1**
NO_VALUES_FOUND        = 2**
OTHERS                 = 3**
*IF SY-SUBRC <> 0.*
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO**
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.**
*ENDIF.*
*wating for any reply*

Did you take a look at the help for FM? pass the hardcoded value for DYNPPROG and DYNNR (and see if that works)
DYNPPROG and DYNNR cannot be passed as SY-REPID and SY-DYNNR because they are only analyzed after the function module has been called. Instead, first copy the SY fields to local variables and then pass them to the function module.

How to search two columns and return a value in the same row to a cell?

Identification
Diameter
Soak
3" Tank (inches/kft)
AWG
mils
Code
Strands
Shield
Conductor
Insulation
Semi-Con
Days
SD
Injection
Soak
Total
2
175
00
7
External
0.288
0.692
0.752
60
0.4
3.6
20.0
23.6
2
220
00
7
External
0.284
0.764
0.864
75
0.4
3.6
20.0
23.6
2
260
00
7
External
0.284
0.844
0.944
90
0.4
3.6
21.8
25.4
2
320
00
7
External
0.288
0.964
1.064
110
0.4
3.6
24.3
27.0
2
345
00
7
External
0.288
1.014
1.114
115
0.4
3.6
25.6
29.2
Length
3"
4"
AWG
mils
Soak
SD
Injection (3")
Injection (4")
650
2
320
I want to input two values, AWG and mils and return the value in the Days column.
In the instance of what I am showing .... AWG=2 AND mils=320 so Soak=110 ....
I want to search the columns (AWG) AND (mils) to return a value in the column (Days) for that row into cell H10 (Soak) ...
So far I have toyed with LOOKUP, INDEX and MATCH ....

SCW,
I'm sure there is a clever way to cascade functions to avoid adding an auxiliary column in your practice table, but to me it wouldn't be worth the aggravation. I would add a column that concatenates Columns A & B, AWG & mils. This column can be anywhere and would be Hidden. Let's say your new column is Column N.
In Column N, fill the body rows with:
=A&"-"&B
As good Numbers programming form would indicate, let's name the Practice Table Practices and only put the practices in that table. In another table where you do the lookup, let's call it Program, we will have the calculation/lookup.
Based on your example, I'd guess that AWG may be in Column D and mils in Column E of your Program table, and the Soak lookup in Column F. If I'm wrong, adjust the column id.
In Column F, write:
=OFFSET(Practices::I$1,MATCH(D&"-"&E, Practices::N,0)−1, 0)
The hyphen in the concatenated representation of the combination of AWG and mils is just tp make it more readable.
As I'm sure you know, you could use other approaches, but since I had you put your aux column at the end of your Practices table, OFFSET with MATCH is a clean approach. INDEX could be used too.
Here's an illustration:
Regards,
Jerry

How to return a value from sql plus activity

Hi,
I want to return a value from sqlplus activity to a processflow variable.
SQL PLUS activity has a property :"RESULT_CODE", whenever i run the process flow this value is always reurned as 0.
in sqlplus activity i have written some pl/sql block....
for example
begin
end;
exit
i want to do something like
begin
if v=100 then
return 1
else
return 0;
end if;
end;
exit
can some please tell me how can i return value from this pl/sql block to proessflow.
Regards,
RD_RBS

table ==> function
input param from table to function. ==> input mapping paramter to store the output from the mapping.
Will this now work.

Standar ws ProjectByPartyQueryResponse_In is not returning any values

Hi gurus,
I'm trying to use the standar webservice ProjectByPartyQueryResponse_In in our landscape in order to get all the projects related to the person responsible for the project but the web service is not returning any values.
When I execute the service -using soapui- with the following values (or any other value for that matters):
<PartyID>20000143</PartyID>
<PartyRoleCode>ZA</PartyRoleCode>
The web service always returns :
       <Log>
            <BusinessDocumentProcessingResultCode>5</BusinessDocumentProcessingResultCode>
            <MaximumLogItemSeverityCode>3</MaximumLogItemSeverityCode>
            <Item>
               <TypeID>002(ECC_SE_COMMON)</TypeID>
               <SeverityCode>3</SeverityCode>
               <Note>No records returned for ZA 0020000143</Note>
            </Item>
         </Log>
The party Id exists and also de party role code and there is at least one project that has that party with that role. I'm sure because I use other web service to find a project by id and in the result the project has the <Party> section with those values.
I was looking for solutions, notes, threads in forums with no success, then i decided to debug the webservice and I did find the following line in the webservice code.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
when that line executes the select always returns 0 values, then I look in the table IHPA using the SE16 without any filter and I found that my records exists!! but the select does not get it. I was wondering why the select is not working and then I filter the data in the SE16 using the same values that the query does
for example:
PARVW= ZA
PARNR = 20000143
OBTYP = PDN
And I was surprised when the SE16 did not found any value even I was seeing in the previous screen with no filters!!!! And I supouse thats why the webservice is not working. I started making filters one by one, for example firts filtering just de PARVW = ZA and works, but when I filter just the PARNR = 20000143 the SE16 can't find any value, just when I put an * at the end of the number the SE16 returns all the values expected, Im guessing that the fields in the database has blanks at the end but this is a standar table and a standar program.
Have any of you had the same problem? is there anything that I can do? does anyone knows if this is an unkown bug? becaus I could'n find any note on the marketplace.
Any help would be appreciated.
Gustavo Balboa

Hi!
The problem were solved but not using the Badi, because the badi only let you change the value of the var party_id and that var is declared as PARNR (of type numeric with length 10), and no mater wat you do the two 00 can´t be removed.
We solved the problem with an enhancement point in the code at the method "party_get_data", look at the beginin and at the end. We just change the type of var used for party_id.. now we use a CHAR one insted the numeric used by the original code.
And we repeat the select...
Thank you very much for the help.
METHOD party_get_data.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(1) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, Start                                                                                A
$$-Start: (1)----
$$
ENHANCEMENT 1 ZPARTY_GET_DATA.    "active version
DATA : WA_PARNR TYPE I_PARNR.
DATA : WA_CHPAR(10) TYPE C.
ENDENHANCEMENT.
$$-End:   (1)----
$$
DATA : temp_object_number TYPE ihpa-objnr,
          field1 TYPE char50,
          field2 TYPE char50,
          field_role TYPE char50,
          field_party TYPE char50,
          st_object_number TYPE TABLE OF bapiprexp.
DATA : it_data TYPE TABLE OF st_data,
         wa_data LIKE LINE OF it_data,
         itab TYPE TABLE OF st_data,
         wa LIKE LINE OF itab,
         wa_project_details LIKE LINE OF project_details,
         null.
Select Object number based on input Party and Role
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(2) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, End                                                                                A
$$-Start: (2)----
$$
ENHANCEMENT 2 ZPARTY_GET_DATA.    "active version
WA_CHPAR = party_id.
SHIFT WA_CHPAR BY 2 PLACES.
CLEAR party_return.
REFRESH party_return.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = WA_CHPAR AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
ENDENHANCEMENT.
$$-End:   (2)----
$$
ENDMETHOD.

Inputs return minimum value

Similar Messages

Maybe you are looking for