Insert CSV data into a table from URL

Hi,
How can I insert the CSV data directly into a database table (the csv format is known, the database table is created accordingly)?
Thanks
Devang.

Devang,
There is a limit on the amount of text (32767) you can paste and upload.
I created a process that allows the user to upload a .csv file and it is then written (UTL_FILE) to a known file on the db server. I have an external table definition mapped to that file so I don't have to do any parsing or anyting.
This should work for your situation since you already know the format of the file and the table is already created.
Hope this helps.
chet

Similar Messages

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

Insert data into fact table from source database tables

here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?

I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Insert data into oracle table from XML file

I need to insert data into oracle table from XML file
If anybody handled this type of scenario, Please let me know how to insert data into oracle table from XML file
Thanks in advance

The XML DB forum provides the best support for XML topics related to Oracle.
Here's the FAQ on that forum:
XML DB FAQ
where there are plenty of examples of shredding XML into Oracle tables and such like. ;)

Insert Multiple rows into the table from that table data

Hi All,
I have a requirement like to insert mulitple rows into the table from that table data only(I need to replicate the data).
In this table primary key is composite primary key with all foreign keys.primary key also including the Date foreign key.I need to change that date at the of insertion.
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
VALUES
(SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510
But it is giving the error like missing Expression.
Could anyone please help to me.
Thanks and Regards
Swetha.

You can have either VALUES or SELECT not both
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510;

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

How to insert text data into temp tables....

Dear All,
I have one notepad with three columns, first column is segment1, second column is segment2 & third column is price list....
and there is no delimiter and exact spaces..(i.e, zizak fomat)
Ex:-
xx yy 00009999
kk mmmm 00009333
Data is available like above example...So, I need to insert this data into one table.(2LAKSHS OF RECORDS AVAILABLE IN THAT NOTEPAD)
So, Any can one help me, how to insert this kind of text data into temparory table...
Regards
Krishna
Edited by: user12070109 on May 29, 2010 9:48 PM
Edited by: user12070109 on May 29, 2010 9:49 PM

Hello,
What manu suggested this can be done through oracle forms.
If as i read your last post you are using that in database it will not work in db. Try to use the same process in oracle forms will work by making some changes.
And if you don't want to use forms then there is one way using SQL LOADER. It required control file to execute for uploading data.
See the below link.
http://www.orafaq.com/wiki/SQL*Loader_FAQ
In this example its showing filename.csv you can use your file name like yourfilename.txt.
So your control file will look like this...
load data
infile 'file_path\file_name.txt'
into table table_name -- use actual table name where you want to upload data
fields terminated by " " -- Here using spaces as you mentioned
(column1, column2, column3) -- Here use the three column names of tableAnd after creating control file with the above code. You can call it in command prompt like this
sqlldr username/password control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
or
sqlldr username/password@dbconnection control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
Before doing this practice make sure SQLLDR.exe availabe in the machine where you have to execute. Otherwise you will have to install db client for using sqlldr.exe
-Ammad

How to insert/Update date into Dictionary Table?

Dear Experts,
I have created a Dictionary Project and Deployed.I think the table had created in portal database.
now i want to insert some data into that table?
Can you plz tell me how to access the table using Abstract Portal Component using DynPage.
Waiting for ur replies...
Thanks and Regards,
Visweswar.

Hi
Can u share the Logic???

How to insert Legacy data into QP_RLTD_MODIFIERS table?

How to insert Legacy data into QP_RLTD_MODIFIERS table in R12 instance.

I would use the API QP_Modifiers_PUB.Process_Modifiers for pushing legacy pricing data into R12. QP_RLTD_MODIFIERS is only used for certain types of discounts (in my prod environnment, only promos have data in this table).

Trigger to insert unique data into other table (having more than 40 millions of records) - MYSQL

Hi All,
i am facing impact of trigger in MYSQL, scenario is this:
I am Having one table with duplicate records that is consist of (eid,tin,status and some other columns are also there but i need only these three). there is another table which is having same these three columns (eid, tin, status).
eid and tin will be same for given combination only status will be different i.e.
1245 23 0
1245 23 1
1245 23 5
1233 33 3
1211 24 2
1211 24 5
so as per above example i have to feed data into other table as
1245 23 0
1233 33 3
1211 24 5
priority of status is like 0 will be inserted if that is present in record otherwise it will be decrease from 5 to 1.
so i have designed trigger for this which will insert data after reading each row, but it is taking around 6.5 minutes for inserting 300000 records. so is there any other way to improve performance for this mysql program.
DELIMITER $$
CREATE
    /*[DEFINER = { user | CURRENT_USER }]*/
    TRIGGER `kyr_log`.`upd_status` AFTER INSERT
    ON `kyr_log`.`kyrlog_bup`
    FOR EACH ROW
    BEGIN
DECLARE v_eid VARCHAR(28);
DECLARE v_status INT(11);
SELECT kyrl_eid,kyrl_status INTO v_eid,v_status FROM kyrlog_bup ORDER BY kyrl_id DESC LIMIT 1;
   IF v_eid NOT IN (SELECT kyrl_eid FROM update_status.new_status) THEN
INSERT INTO update_status.new_status(kyrl_eid,kyrl_tin,kyrl_status)
SELECT kyrl_eid,kyrl_tin,kyrl_status FROM kyrlog_bup ORDER BY kyrl_id DESC LIMIT 1;
   ELSE IF v_status=2 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
          UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=3 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
          UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=4 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
           UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=5 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
           UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
           ELSE IF v_status=0 THEN
UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
          END IF;
       END IF;
       END IF;
       END IF;
       END IF;
       END IF;
    END;
$$
DELIMITER ;
please suggest me if there is possibility of any other solution.
thanks

actually you didn't have seen discussion on this link , there are many discussion related to MYSQL . and mysql is owned by oracle. so i post it here.
thanks for suggestion

Trying to insert CLOB data into Remote Table..

Hi everyone,
I think this question had already posted.But i am not able to figure out this problem..
what i am trying to do is
I have a table in the remote database with a CLOB column like this
REMOTE_TABLE
============
REMOTE_TABLE_ID (Populated with sequence)
REMOTE_CLOB CLOB
In my Local database i have to write a Procedure to gather some information on a particular record (My Requirement) and save that CLOB in the REMOTE_TABLE.
I built that procedure like this
Declare
var_clob CLOB; /* I need to processs several records and keep all data in a clob
begin
/***** Processed several records in a local database and stored in the variable var_clob which i need to insert into remote database ****/
Insert into remote_table@remote values (remote_table_seq.nextval,var_clob);
/*** when i try to execute the above command i am getting the following error
ORA-06550: line 6, column 105:
PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables
ORA-06550: line 6, column 1:
PL/SQL: SQL Statement ignored *****/
/***For a test i created the same table in local db****/
Insert into local_table values (local_table_seq.nextval,var_clob);
It is working fine and i am able to see the entire CLOB what i want.
surprisingly if i pass some value instead of a varibale to the remote table like the following..
Insert into remote_table@remote values (remote_table_seq.nextval,'Hiiiiiiiii');
It is working fine...
I tried the following too..
decalre
var_clob clob;
begin
var_clob := 'Hiiiiiiiiiiiiiii';
Insert into remote_table@remote (remote_table_id) values (1);
commit;
update remote_table@remote set remote_clob = var_clob where remote_table_id = 1;
commit;
end
I am getting the following error..
ORA-22922: nonexistent LOB value
ORA-02063: preceding line from CARDIO
ORA-06512: at line 6
Could someone please help me in fixing this issue..I need to process all the data to a variable like var_clob and insert that clob into remote table..
Thanks in advance..
phani

Go to http://asktom.oracle.com and search for clob remote table
also docs contain quite lot of info:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_working.htm#sthref97
Gints Plivna
http://www.gplivna.eu

How to insert new record into oracle table from GridView in VS2005.

I need to insert records into Oracle10g table from VS2005 GridView using the Insert Method in Business Logic Class. The Update and Delete Methods are working fine. What's the best way out?

How is it "not possible"?
Either modify the Class for the new fields, or give the new fields default values (if applicable). If the type of an existing column has changed, then only the first option is available.
Where's the problem?

Insert the data in sap tables from C SHARP application

Hi All,
I want to save some data in sap table from my CSharp(DOTNET) windows application.I tried with the help of SAP.Net Connector but that connector is not been supported visual studio 2005 or i not have visual studio 2003 .Soo plz any one can help how i can do this .
If any one have a idea then plz give me some example also how we did.
thanks
regards
sandeep Dabral

You have to use SAP .NET connetor to make interface with SAP. This is better way of doing interface between .NET and SAP.
You create web service (wsdl) in .NET 2003 and try to use that in .NET 2005.
You're getting the two technologies confused ......
.Net Connector is used for RFC-type interfaces. It calls Bapi's directly. Web services are not involved for this type of interface.
WSDL files are used to generate proxies for the .Net client to call Web Services (typically web-enabled Bapi's). This type of interface uses SOAP protocol not RFC and does not use the .Net Connector. Enterprise Web Services may be discovered using the .Net Enterprise Service Explorer, which is a different component from the .Net Connector.
Regards,
D.

I can't insert my data into the table - help please

Hello everyone,
I have a trouble about JSP. I'm using Java2 SDK,JSP 1.2,Mysql and TOMCAT.
I want to do this. A user has to enter the nicno,into the html form(EnterNicInter.jsp),to verify if it is already exist or not. If it is exist in the db, an error msg(Record already exist) must be displayed. If not, then the page "InterviewForm.jsp" displayed. This part is working.
But, I can't save these details into the db by clicking submit button int the InterviewForm.jsp.
I wrote a javaBean for this task. Here is it.
CandidateMgr.java
package hrm;
import java.io.*;
import java.sql.*;
public class CandidateMgr
     private String nicno;
        private String title;
        private String firstName;
     private String civilStatus;
        private String tele;
        private String eduQua;
     // Constructor
     public CandidateMgr()
          this.nicno = nicno;
          this.title = title;
          this.firstName = firstName;
          this.civilStatus= civilStatus;
          this.tele = tele;
          this.eduQua = eduQua;
          //getters & setters.
           // Initializes the connection and statements
        public void initConnection() {
                if (connection == null) {
             try {
                      String sql;
                      // Open the database
                      Class.forName(DRIVER).newInstance();
                      connection = DriverManager.getConnection(URL);
                      //Verify nicno
                      sql="SELECT * FROM Candidate where nicNo= ?";
               pstmt1 = connection.prepareStatement(sql);
               sql ="INSERT INTO Candidate
               VALUES(?,?,?,?,?,?)";
               pstmt2 = connection.prepareStatement(sql);
         catch (Exception ex) {
            System.err.println(ex.getMessage());
     public boolean verifyNicNo(){
          boolean nic_no_select_ok = false;
          String nic="xxxx";
          initConnection();
                try {
                   pstmt1.setString(1, nicno);
               ResultSet rs1 = pstmt1.executeQuery();
                            if(rs1.next()){
                    nic=rs1.getString("nicNo");
                           if(nic=="xxxx")
                    nic_no_select_ok = true;
               } else{
                    nic_no_select_ok = false;
               rs1.close();
                       pstmt1.close();
                catch (Exception ex) {
                  System.err.println(ex.getMessage());
          return nic_no_select_ok;
     public boolean addInter(){
          boolean add_inter_ok = false;
          try{
                  //assign values for the object
               pstmt2.setString(1, nicno);   //      ERROR(java:652)
               pstmt2.setString(2, title);
               pstmt2.setString(3, firstName);
               pstmt2.setString(4, civilStatus);
               pstmt2.setString(5, tele);
               pstmt2.setString(6, eduQua);
               if(pstmt2.executeUpdate()==1) add_inter_ok=true;
               pstmt2.close();
              catch(SQLException e2){
                       System.err.println(e2.getMessage());
          return add_inter_ok;
IntreviewForm.jsp (used to submit data into the db)
<form method="POST" action="InterviewCtrl.jsp">
     //codes
<input type="text" name="nicno" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
<input type="text" name="title" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
<input type="text" name="firstName" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
<input type="text" name="civilStatus" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
<input type="text" name="tele" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
<input type="text" name="eduQua" size="14" style="border:1px solid #0000FF;
color: #FF0000; font-weight: bold">
</form>.......................................................................
Here is the "InterviewCtrl.jsp"
<%@ page language="java" import="java.util.*"%>
<%@ page import="hrm.CandidateMgr" %>
<%@ page session="false" %>
<jsp:useBean id="candidate" class="hrm.CandidateMgr" scope="request"/>
<jsp:setProperty name="candidate" property="*"/>
<%-- Execute the addInter() method on the bean and check if it is true or false.-- %>
<%-- if it's true then display a confirmation message "InterConfirm.html" --%>
<%-- else display InterError.html --%>
<%
String nextPage ="MainForm.jsp";
if(candidate.addInter()){
     nextPage="InterConfirm.html";
     }else{
     nextPage="InterError.html";
%>
<jsp:forward page="<%=nextPage%>"/>.......................................................................
Here is the error:(I mark it in my bean also)
root cause
java.lang.NullPointerException
     at hrm.CandidateMgr.addInter(CandidateMgr.java:652)
     at org.apache.jsp.InterviewCtrl_jsp._jspService(InterviewCtrl_jsp.java:66)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
I use JSP 1.2 , mySQL with TOMCAT. My table name is Candidate.It's fields are as follows:
Candidate(nicNo,title,fName,civilStatus,tele,eduQua)
Can anybody tell me whats going on, help me to solve this please.
Thanks.

you should try something different, since you are mixing up a lot of code.
1) create a separate method just to connect and disconnect from a database;
2) use the value entered and see if you can find a record in the table. If the record is there, then you should re-direct your jsp to a jspError, else goes to another form.
the code below give you some idea
      if( sAction.equals("Add1") ) {
        sITEM = request.getParameter("parameter1");
        try {
          itemmaster.connect();
          itemmaster.viewitemmaster( sITEM );
          rs = itemmaster.getRs();
          if( rs.next() ) {
            sURL = "additemmaster1.jsp";
          else {
            request.setAttribute( "asITEM", sITEM );
            sURL = "additemmaster2.jsp";
        finally {
          rs.close();
          itemmaster.disconnect();
      }

Insert CSV data into a table from URL

Similar Messages

Maybe you are looking for