Insert entries in empty table
Hello experts,
I got an easy question for you. How can I include new entries on any table that at the beginning does not have entries?. If the table has entries I can select one of them and insert new ones by debugging but I don´t know how to do it without entries
Thanks a lot
Regards
German
Hi,
Go to se16,
Write the table name you need then click on the white paper ()
Insert your entries:
Finally, click on Save
Similar Messages
-
BPM question - Delete all entries in a table and Insert data
Hello,
I'm new to PI BPM and have this scenario to implement.
I'm supposed to delete all entries in a table and then insert data to the same table.
Is BPM necessary? If it is, what is the best practice to implement my scenario?
I want to make sure that all entries were successfully deleted before insert data.
How do I check if all entries in the table were deleted successfully before
initiating insert.
Thank you.
-WonHi Won,
Yes, this is possible without BPM.
You have to create 2 separate mappings, each for deleting & inserting the records.
You will have 2 different Interface mappings as well.
But in ID, create a single interface determination.
In that, configure Deletion interface mapping first and in the second row, configure Insertion interface mapping.
Please make sure that the parameter 'Mainain Order At runtime' is checked in interface determination.
-Supriya. -
Insert delete or update entry in Custom table from KONV entry changed
Hi All,
I have custom table ZKONV with only few required columns and should have same number of records as KONV has at any point in time.
KONV is a cluster table so its not readable from ORACLE level. So ZKONV is created. But I dont know how to keep these both tables in sync.
I need to perform insert delete or update entry in Custom table if insert delete or update happens on cluster table KONV from any transactions.
As KONV is a cluster table and does not have changed time stamp I am not able to know the number of records changed in perticulat time period.
Thanks,Thanks for reply,
There is a Outside SAP system which needs to read KONV data to feed into their system, but as KONV is cluster table they are not able to read it from ORACLE level.
To solve this we are thinking to create a transparent Z-table and will fill it with KONV and catch Update, delete or Insert statement and do same on ZKONv.
Is this possible some how? by some database event or something.... -
Make entries in a table in webdynpro abap
Hi all,
We have a requirement to make multiple entries in a Table in webdynpro ABAP.
We have created a table and inserted inputfield as cellEditor
but at runtime it is being displayed in readonly mode we cannot enter anything in that inputfield.
inputfield is binded with a context and table is not in readonly mode.
Please help in this regards
thanks & regards.....
Gaurav MakinHi Gaurav,
Make sure the context node bound to the table has cardinality 0..N.
When the app starts you probably need to read the table contents from the database or some other source and populate the contect node.
The table will allow the user to edit values only for the rows that have a corresponding element in the context node.
If the initial content is empty, i.e. no elements in the context node then the user will not be able to edit.
You will need to either initialize the context node with a bunch of elements if the number of entries is fixed and known beforehand, or provide a way for the user to create a new row.
You can do this by adding a toolbar to the table with a create button with a CREATE action and the following method:
method onactioncreate.
data:
lo_element type ref to if_wd_context_element,
lo_node type ref to if_wd_context_node.
lo_node = wd_context->get_child_node( name = 'your node name here' ).
lo_element = lo_node->create_element( ).
lo_node->bind_element( new_item = lo_element set_initial_elements = abap_false ).
endmethod.
Regards... Lucio Menzel -
Unable to display data no entry in the table without using Model clause
Hi,
I've an urgent requirement described below :
The previously posted Question has been answerted using Model Clause:
Is there any way out to solve it without using Model clause:
I've a table named as "sale" consisting of three columns : empno, sale_amt and sale_date.
(Please ref. The table script with data as given below)
Now if I execute the query :
"select trunc(sale_date) sale_date, sum(sale_amt) total_sale from sale group by trunc(sale_date) order by 1"
then it displays the data for the dates of which there is an entry in that table. But it does not display data for the
date of which there is no entry in that table.
If you run the Table script with data in your schema, then u'll see that there is no entry for 28th. Nov. 2009 in
sale table. Now the above query displays data for rest of the dates as its are in sale table except for 28th. Nov. 2009.
But I need its presence in the query output with a value of "sale_date" as "28th. Nov. 2009" and that of "total_sale" as
"0".
Is there any means to get the result as I require?
Please help ASAP.
Thanks in advance.
Create table script with data:
CREATE TABLE SALE
EMPNO NUMBER,
SALE_AMT NUMBER,
SALE_DATE DATE
SET DEFINE OFF;
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('12/01/2009 10:20:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/30/2009 10:21:04', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/29/2009 10:21:05', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/26/2009 10:21:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/25/2009 10:21:07', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 5000, TO_DATE('11/27/2009 10:23:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 4000, TO_DATE('11/29/2009 10:23:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 3000, TO_DATE('11/24/2009 10:23:09', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 2000, TO_DATE('11/30/2009 10:23:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 7000, TO_DATE('11/24/2009 10:24:19', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 5000, TO_DATE('11/25/2009 10:24:20', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 3000, TO_DATE('11/27/2009 10:24:21', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 2000, TO_DATE('11/29/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 1000, TO_DATE('11/30/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
Any help will be needful for me
Regards,select sale_date,sum(sale_amt) total_sale
from
select empno,0 sale_amt,(sale_date + ao.rn) sale_date
from
select empno,sale_amt,sale_date ,(t.nxt_dt - t.sale_date) diff
from
select empno
,sale_amt,trunc(sale_date) sale_date
,trunc(nvl(lead(sale_date) over (partition by 1 order by sale_date),sale_date)) nxt_dt
from sale
) t
where (t.nxt_dt - t.sale_date) >1
) rec,(select rownum rn from user_objects where rownum<=200) ao
where ao.rn <=(rec.diff-1)
union all
select empno,sale_amt,trunc(sale_date) sale_date
from sale
group by sale_date
order by 1;
~~~~Guess this will serve the purpose...
Cheers Arpan -
How to schedule a job poles for a entry in a table.
Hi All ,
I have to schedule a job which runs somw stored procedures only on sunday and monday of a week at 3 AM in the morning.
The condition is that another application puts an entry into a table around 3 AM (some times before and some times late), now my should query
count in the table and runs the procs , however once its done ,it should do it monday and then it should not run till next sunday.
I have successfully created a job which keeps failing till it receives the entry and successfully runs the proc once the entry is there...
However how to schedule this thing ..correctly I need help , I want this job to disable itself on sunday once the procs are run wake up next morning
run again..and then next week ..
Following is the job ,
BEGIN
-- Job defined entirely by the CREATE JOB procedure.
DBMS_SCHEDULER.create_job (
job_name => 'TESTING_FIRST_JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN SEODS.test_procedure_11292011(); END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'freq=minutely; byminute=5',
end_date => NULL,
enabled => TRUE,
comments => 'Job defined entirely by the CREATE JOB procedure.');
end;
=====================================================
and following is the proc...
create or replace
procedure
test_procedure_11292011 as
var number;
begin
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS STARTED SUCCESSFULLY');
commit;
SELECT COUNT(*)
INTO var
FROM seods.student_weekend_status;
if var=0 then
raise_application_error(-20101, 'There is no record in the student_weekend_status table');
else
all_realtime();
end if;
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS FINISHED SUCCESSFULLY');
commit;
end;
Thanks in advance , please helpHi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support -
How to get list of block identifiers in a empty table and an empty index
We have an application that has issue with ITL waits: this application is running many INSERT statements on a table that has 2 NUMBER columns and one primary key index. The application is designed to run INSERT statements but they are never committed (this is a software package).
To check what are the really allocated ITL slots, I know that I can dump data block but I don't know how to get the block identifiers/numbers for an "empty" table and an "empty" index. Does someone knows how to do that ?
PS: I already had a look to the Metalink notes and I have a Metalink SR for that but maybe OTN forum is faster ?You should be able to find the first data/index block with the following, even on an empty table/index.
select header_file, header_block +1
from dba_segments
where segment_name = '<index or table name>'; -
How to populate multiple entries to Bapi Table
Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.models.veteranpoint.Zrecr_Aplno appid = new
com.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi sHi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
<b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
Step 5:
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
Regards,
Viji Priya -
How do I run a database procedure that inserts data into a table from withi
How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
ColinHi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian -
Question in ABAP syntax, read & insert data from internal table, while loop
Hi, SDN Fellow.
I am from Java background and learnt ABAP, I don't usually write much ABAP code.
I am trying to implement the following logic in a RFC now.
I have one z-custom database table, the structure as the following:
It has two columns, with these sample data.
Says datable table is ZEMPMGRTAB.
EmployeeID,ManagerID
user10,user1
user9,user1
user8,user1
user7,user2
user6,user2
user5,user2
user4,user2
user2,user1
The logic is this:
I have a input parameter, userid. I am using this parameter to have a select statement to query the record into export table,EXPTAB 'LIKE' table ZEMPMGRTAB.
SELECT * FROM ZEMPMGRTAB
into table EXPTAB
WHERE EMPLOYEEID = USERID.
Say, my parameter value, USERID ='USER4'.
Referring to the sample data above, I can get the record of this in my EXPTAB,
EmployeeID,ManagerID
user4,user2
Now, I want to iterately use the EXPTABLE-ManagerID
as the USERID input in SELECT statement, until it has no return result. Then, insert the new records in
EXPTAB.
In above new loop case, we will get this table content in EXPTAB,
EmployeeID,ManagerID
user4,user2
user2,user1
I kind of think of the pseudocode logic as below:
(These may not be a valid ABAP code, so I need help to convert/correct them)
DATA:
IWA TYEP ZZEMPMGRTAB,
ITAB
HASHED TABLE OF ZZEMPMGRTAB
WITH UNIQUE KEY EMPLOYEEID.
SELECT * FROM ZEMPMGRTAB
into table ITAB
WHERE EMPLOYEEID = USERID.
*Question 1: I cannot insert a internal table to export table, it is *incompatible type, what is the alternative way fo this?
*Question 2: How can I access thedata of the internal table like this,ITAB-MANAGERID? As if I can, I would do this:
* IWA-EMPLOYEEE = ITAB-EMPLOYEEID. IWA-MANAGERID = IWA-MANAGERID. INSERT IWA INTO TABLE EXPTAB.
* Question 3: Is the 'NE NULL' - 'not equal to NULL' is right syntax?
IF ITAB NE NULL.
INSERT ITAB INTO EXPTAB.
ENDIF
* Question 4: Is my WHILE loop setup right here? And are the syntax right?
WHILE ITAB NE NULL.
SELECT * FROM ZEMPMGRTAB
into table ITAB
WHERE EMPLOYEEID = ITAB-MANAGERID.
IF ITAB NE NULL.
INSERT ITAB INTO EXPTAB.
ENDIF
REFRESH ITAB.
ENDWHILE.
Assume all the syntax and logic are right, I should get this result:
EmployeeID,ManagerID
user4,user2
user2,user1
If I have a new entry in datable table,ZEMPMGRTAB like this:
user1,user0
My pseudocode logic will get this result:
EmployeeID,ManagerID
user4,user2
user2,user1
user1,user0
I truly appreciate if you can help me to validate the above syntax and pseudocode logic.
Thanks in advance.
KCHi,
FUNCTION ZGETSOMEINFO3.
*"*"Local Interface:
*" IMPORTING
*" VALUE(USERID) TYPE AWTXT
*" VALUE(FMTYPEID) TYPE AWTXT
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*" APPROVERT STRUCTURE ZTAB_FMAPPROVER
*" ACTOWNERT STRUCTURE ZTAB_FMACTOWNER
DATA: T_RESULT TYPE STANDARD TABLE OF ZTAB_FMAPPROVER.
**Question 1: For this line, I got an error says "Program ''USERID" *not found. Is the syntax right, as the USERID is a parameter for the function.
perform add_line(USERID).
ENDFUNCTION.
form add_line using i_user type ZTAB_FMAPPROVER.EMPLOYEEID
changing T_RESULT TYPE ZTAB_FMAPPROVER.
data: ls_row type ZTAB_FMAPPROVER.
* Get record for i_user
select single * into ls_row from ZTAB_FMAPPROVER
where EmployeeID = i_user.
if sy-subrc NE 0.
* Do nothing, there is not manager for this employee
else.
* Store result
QUESTION 2: I am still got stuck on this line of code. It still *says that "T_RESULT" is not an internal table "OCCURS n" *specification is missing. I thought the line: "T_RESULT TYPE *ZTAB_FMAPPROVER" means declare internal table, T_RESULT as type of ZTAB_FMAPPROVER". Am I understand it wrongly?
append ls_row to t_result.
* Call recursion
perform add_line using ls_row-ManagerID
changing t_result.
endif.
endform.
Thanks,
KC -
Insert value in WWWDATA table for sending picture in body of email
Hi
.Requrement: Send image in the body of the email.
I am using cl class to sending email and Function module WWW_GET_MIME_OBJECT requre values from table WWWDATA and WWWPARAMS.
I have image file need to be used in email body for the same i want to entry in the table wwwdata and wwwparams so that they can be used to fetch url detail.
I am not able to insert value in wwwdata. Anybody having idea about it.
Thanks & Regards,
Ravi Grover
Edited by: Ravi Grover on Jul 27, 2011 12:34 PMTo display the image in other systems you will have to store the image in SMWO(SAP Web Repository)
Then call the function WWW_GET_MIME_OBJECT .
Please check this link to [Upload|http://abap-explorer.blogspot.com/2008/10/how-to-display-picture-in-screen.html] data in SMWO.
Regards
Mishra -
Inserting data in database table
Hi Everybody,
Could any one help me out on this,
I have 2 tables ztab and ztab1 ,What i need to do is i need to check each coloum entry of table ztab against there check table if it eixst i need to insert that record in table ztab1 if not then i have to send a message .
From My knowledge Insert Command Does not perform the Checks agains the Check table.
I Would like to use CHECK statemet if any one has any Idea on using CHECK or other then Check Statement PlZ do share .
Regards,
AimaIf you are using ABAP to update your table then there is no other way to validate from all 5 -6 check tables and you will have to select from all.
Statement "CHECK" will not serve your purpose as you have to give an error message if check fails or insert if check passes , so you can only use READ table with IF SY-SUBRC condition .
Even if you dont check the check tables you can insert
entries into ZTAB but then the referential integrity is violated .
Check tables entries are validated when user makes an entry in screen , like when you create a purchase order you cannot enter a non existing material , so I am not sure if you can have user extry on screen . If yes and there is a foreign key defined on table field, it will automatically validate and give error on screen.
Cheers.
( Dont forget to reward if answers were helpful ). -
Hi everyone
I am a little confused by a situtation I have come across in one of our bespoke tables. I was under the impression that all fields in a table that are marked as Key form a Primary Key and therefore it is <b>impossible</b> to create records where these key fields contain duplciate data. However, I have found a bespoke table that is used for logging exception messages that appears to hold records with duplicates in the Key fields. Has anyone else come across this or have any idea how it might be happening? When creating a table is possible to specify a non-unique key in the same way you might for an internal table?! If it is relevant, the table is updated from a program that locks and unlocks the table before and afer the insert takes place and can be caused by both batch and manual changes.
Thanks
AndyThanks Roopesh
I understood the [ACCEPTING DUPLICATE KEYS] flag to mean that a a 'bulk' insert would not fail if a duplicate entry was identified but instead would set subrc to 4, skip the record in question and continue with subsequent records. If this is the case it still should not actually create duplciate entries - surely in doing so referential integrity is being violated...
Here is the section of code that performs the insert if that helps at all:
*lock table and insert processing log details
CALL FUNCTION 'ENQUEUE_EZLG_T024E'
EXPORTING
MODE_ZLG_T024 = 'E'
MANDT = SY-MANDT
EMPLOYER_REG_NO = zlg_t024-EMPLOYER_REG_NO
GRANT_CLAIM_NO = zlg_t024-GRANT_CLAIM_NO
ITEM = zlg_t024-ITEM
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert zlg_t024.
* unlock table.
CALL FUNCTION 'DEQUEUE_EZLG_T024E'
EXPORTING
MODE_ZLG_T024 = 'E'
MANDT = SY-MANDT
EMPLOYER_REG_NO = zlg_t024-EMPLOYER_REG_NO
GRANT_CLAIM_NO = zlg_t024-GRANT_CLAIM_NO
ITEM = zlg_t024-ITEM
Kind regards
Andy -
Error while inserting data into a table.
Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudhHi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish -
Short dumop in J2I5 (provide duplicate entry in Standard table)
Hello Expert ,
We have a problem in T.Code J2I5 ( Excise Register Extraction) input entry is lelect Excise group 20 . and a date from 04.08.09 onwards. and select the register RG23D . it shows the run time error ( Eg The ABAP/4 Open SQL array insert results in duplicate database record ) . but in the standard Tcode is there possible to provide duplicate entry in Standard table
Thaks & regards
Aditya Kr TripathiRuntime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 29.01.2010 10:57:09
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
problem occurs in this code :
assign I_RG23D_TAB-I_RG23D_TYP to <x_rg23dtyp> casting.
<x_extrctdata> = <x_rg23dtyp>.
class CL_ABAP_CONTAINER_UTILITIES definition load.
call method CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
EXPORTING
IM_VALUE = i_rg23d_tab-i_rg23d_typ
IMPORTING
EX_CONTAINER = i_report_tab-extrctdata
EXCEPTIONS
ILLEGAL_PARAMETER_TYPE = 1
others = 2.
I_REPORT_TAB-EXTRCTDATA = I_RG23D_TAB-I_RG23D_TYP.
COMPUTE I_REPORT_TAB-EXTRCTLNGT = STRLEN( I_REPORT_TAB-EXTRCTDATA ).
APPEND I_REPORT_TAB.
ENDLOOP.
IF M_EXTRACTED = 'X'.
LOOP AT I_RG23D_KEY.
DELETE
FROM J_2IEXTRCT
WHERE BUDAT = I_RG23D_KEY-BUDAT
AND SERIALNO = I_RG23D_KEY-SERIALNO
AND REGISTER = I_RG23D_KEY-REGISTER
AND EXGRP = I_RG23D_KEY-EXGRP.
ENDLOOP.
ENDIF.
Control table check here for data Extraction
INSERT J_2IEXTRCT FROM TABLE I_REPORT_TAB.
If the insertion of the extract table is successfull then the table
for Extraction is Inserted
IF SY-SUBRC EQ 0.
PERFORM FILL_EXTDT USING C_RG23D M_EXTRACTED.
ENDIF.
ENDFORM. " RG23D
*& Form RG23CPART1
Purpose : RG23C Part I extraction logic
FORM RG23CPART1.
DATA: $PART1 TYPE PART1_TYP,
$LINCNT LIKE SY-LINCT,
M_EXTRACTED VALUE '',
$RC LIKE SY-SUBRC.
*********************************************************************************************8
Maybe you are looking for
-
Quads, Fans, and Classic
Every time I have to run an app. in Classic, the fans on my quad go nuts. Any ideas?
-
Meet Polar Bears On Line (Video + Stills)
My film "Polar Bear Pueblo" can be seen on the web if you have a high speed internet connection. The video starts in New Mexico with the Carlsbad Caverns, Taos Pueblo, White Sands, Roswell, Santa Fe, and much more. Moving north, it then features the
-
How to Find out Estimated Delivery Date By Calling *611?
I am seeing that people are calling this # and finding out when their iPhone will be delivered. I am wondering what #'s to press and what to say and stuff like that.
-
[SOLVED] gnome-screenshot in gnome3 problem
Hi, When I try to take a screen shot using printscr, or in the command line using gnome-screenshot I only get a picture of my background. $ gnome-screenshot ** (gnome-screenshot:1908): DEBUG: The GetProfileForWindow request failed: GDBus.Error:org.f
-
Variety of problems- not reading from hard drive, etc.
My 30 GB iPod Photo died a while ago, so I recently received an 80 GB 5G for the holidays. However, it hasn't been working correctly. I have a whole list of problems- most would seem to stem from it not reading from the hard drive. Note that almost e