Inserted expression not in mail

Hi all,
I have implement a workflow, where a production order (BUS2005) is created and the order number is saved in a form. Then i have created a mail step to send the order number.
But by execution only the entered text will be send, not the expression (order number of a created container object).
Did i make adaptions in the dataflow of the tasks ? I think they have been done automatically.
I have created the form by using the wizard.
Thanks for help.
tunc

There is probably something wrong in your binding to (or assignment to) this container element, or you don't have any binding/assignment to it at all.
Do you have a container operation where you assign a value to your container element, or do you bind a value into the container element e.g. from your triggering event?
To verify that things work if the container element has a value you can insert a container operation step just before your mail step and hard-code a value. Or, to be more fancy, check if it is initial, and if it is then you assign "(no value)" or something similar.
Message was edited by Kjetil Kilhavn:
As a beginner, have you read the Frequently Asked Questions? If you haven't, you should. It is a matter of netiquette.

Similar Messages

How do I insert a font in Mail which is not in the Pref. scroll-down menu?

How do I insert a font in Mail which is not in the Pref. scroll-down menu?
I love Palatino, I have it bot in the System fonts folder, in the home/library/fonts folder and in the computer/library/fonts folder.
Yet, It does not come out.
Something else I should be doing?

Keep in mind that if the recipient of the email doesn't have Palantino active on their computer, they're not going to see that font on their end. Their system will replace any instance of Palantino with whatever font is they have set as the default in their mail program.

Hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail

hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old one

From King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How to insert a hyperlink in mail content for workflow

Experts,
I want to insert a hyperlink in mail content when i use sendmail type step in workflow.
How to do it?
Thanks you very much!

Hi, Venkat
Thanks you for your help!
I try to use '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>' in the mail, but
my outlook display the mail content is '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>',
is not a hyperlink.
Ken.Li

Can I add a document link to a Note in Mail?

I know you can insert a URL link, but I wanted to link to a document or .pdf on my system within a Note in Mail. Thanks so much!
-- Grace

I just tried to drag and drop the document in the Note and it worked!

JES Messaging Server 6.0 will not accept mail alternate address

JES Messaging Server 6.0 will not accept mail alternate address
I have installed the Sun ONE Messaging server 6.0 as part of an evaluation of the Java Enterprise System. This was installed along with Directory Server 5.2 and Identity Server 6.1. During the installation I created a top level organization (o=internet) knowing that I would want to create multiple email domains within it and a default domain. After the installation was complete I used the User Management Utility (/opt/SUNWcomm/bin/commadmin) to create some users within the default domain. I provided each user with a primary email address ([email protected]) and an alternate email address (mailAleternateAddress = [email protected]).
In testing the system I find that the Messaging Server will not accept messages sent to the alternate email address whether sent from the same server (via Messenger Express) or from an external server. It returns the error message: 550 5.1.1 unknown or illegal alias.
In attempting to trouble shoot this problem I have watched the Directory Server's access log when such an email is sent. It shows a query using [email protected] even though the email message was sent to [email protected] In any event the DS finds the user, but the Messaging server rejects the message.
[date_time] conn=120 op=11 msgId=12 - SRCH base="o=domain.com,o=internet" scope=2 filter="(mail=[email protected])" attrs="preferredLanguage mail mailEq
uivalentAddress"
[date_time] conn=120 op=11 msgId=12 - RESULT err=0 tag=101 nentries=1 etime=0
[date_time] conn=120 op=12 msgId=13 - SRCH base="o=internet" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=host.domain.com)(sunPreferredDomain=host.domain.com)))" attrs=ALL
[date_time] conn=120 op=12 msgId=13 - RESULT err=0 tag=101 nentries=0 etime=0
Any suggestions to eliminate this problem would be appreciated.

Both the primary and alternate email addresses are the same as the domain of the user.
Here is what I want to do. Email is sent to a primary email server (not this machine). Mail for some users stays on that server to be read and mail for other users is moved to a geographically separate server (the one in question) by specifying that the mail be forwarded to the specific host: [email protected] > [email protected]
On this second server I want to host two (or more) independent email domains. I do not want one of the domains to be a subdomain of the other. So during the installation I used o=internet as the root suffix and then used a different default domain (representing one of the registered internet domains). After installation I used the commadmin tool to create a second domain so now I have what looks something like this:
o=internet,
__ou=People
__ou=Groups
__o=domain1
____ou=People
____ou=Groups
__o=domain2
____ou=People
____ou=Groups
I then created some users under domain1 and some under domain2 so one user's dn is:
uid=user, ou=people, o= domain1.com, o=internet.
Mail sent locally to user@ domain1.com gets delivered correctly, but sending to [email protected] does not.
host2.domain1.com is the fully qualified domain name of the server.

Why does 'insert image' not work?

If I use Insert Image, the image appears on the email, but is not sent to the recipient. Why?
Whats the point of it if it appears to work but doesn't?

<blockquote>The fact that WYSIWYG does not work sometimes is no reason to regard it as not sensible to try and achieve. </blockquote>
Never is more the point. It never works on the internet, every browser and mail client renders fonts and forms and images differently. That is why most web sites use the browser string to choose which version of the site to offer up.
Change printers in a word processor and see WYSIWG change. Field questions from users who have suddenly manager to get their document on a 30 degree slant because their document formatting resembles a typewriter.
<blockquote>If what you see on the screen is completely different from what you send, how are you supposed to make quality judgements? </blockquote>
People writing computer programs and HTML have been doing it ever since there have been computers. Imagination and knowledge of the rendering capabilities to the expected client give some level of confidence. and KISS applies. The less complex the less likely it is to go spectacularly wrong
<blockquote>Having a link to a persons computer from another computer is an invitation to hackers. </blockquote>
That is what every address on the internet is, a link from one computer to another. Usually, your computer to someone elses. It is also why windows supports UNC names for files.
<blockquote>Why would you do that?</blockquote
Perhaps so content can be created once and use repeatedly without having to copy the data and perhaps corrupt it in the process. It also allows for content to be changed after the fact, so you can do a countdown due in X days
<blockquote>
Also,it still doesn't work. I tried sending myself an email, </blockquote>
Did you get the email, many providers just don't deliver mail to yourself anymore.
<blockquote>
and it should have referenced the file on my computer, but it didn't.
</blockquote>
What did the HTML img tag actually contain?
<blockquote>
The concept of sending half a document, and referencing the rest of the document from a computer somewhere on the Internet (which might be off), absolutely stupid from many points of view.</blockquote>
Depends, remote images in email are a perfect example of it. Many of today's emails would not be sent due to their size if the images were not remote, and how to marketers get to know who you are unless there are remote images so they can track you.
In a corporate environment there are places where you would be sacked for actually attaching documents to an email. A link to them on the server maintains the companies control of their intellectual property. Placing it in an email obviates all of that.
So get used to the fact that email is not WYSIWYG. It does not even use the same fonts you do, unless by happen-chance the recipient also has the same ones.
What does the message source say about the IMG tag for the image.
<preformat>
><img alt="" src="file:///C:/Users/Matt/Desktop/CSV%20how%20to/more%20images/blinkers.png" height="315" width="392">
</preformat>
It will look something like this for a local link with moz-do-not-send="true" set if I specify not to include the image with the message.
<blockquote>If Thunderbird has some inherent problem with incorporating image files into a document, then it should not allow it as an option. </blockquote>
I am afraid is simply do not understand that statement at all. You are the only person I have ever encountered that could not include an image in their email.
<blockquote>One thing that most Windows software now allows is transferring files between formats, </blockquote>
How come I can not get mail out of outlook in a usable format? Are BMP, JPEG and PNG images interchangeable?
I previously asked <blockquote>So what format is this image? (What file type) How large is it? What anti virus program do you use?</blockquote>

Safari, iPhoto & iCal not finding Mail

For some strange reason Safari cannot "see" Mail to "send a link" or "contents" of a web page. I get a message saying that I meed to install Mail first. In iPhoto the button to "email" a picture is generic (grey oblong and not iconic) and now only asks the size I want to send but does not send. I DO have Mail installed and it IS working to the best of my knowledge but somehow neither Safari nor iPhoto can find it. And now I have tried to send a reminder to myself in iCal and THAT does not "see" Mail. Neither does iCal recognise the "Me" in AddressBook when entering an "invitee". AddressBook however will send me an email from the contextual menu dropdown in the email address field??? Wierd, eh? Any ideas? thanks and cheers! sam BTW ALL of the above were working over the past week or so....

ALL of the above were working over the past week or so....
Have you changed any settings or installed any software? Do you remember what you did just prior to your issues?
Do you have the latest versions of Safari, iPhoto and iCal?
Try trashing the com.apple.mail.plist file and restart your computer - ~/Library/Preferences/com.apple.mail.plist
Do you have the same issues in a new account?
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

EL expressions not evaluating after JSF 1.1 --- 1.2 upgrade.

I am having a problem with EL expressions not evaluating in a JSF application that I just upgraded from Apache MyFaces JSF 1.1 to JSF-RI 1.2 and from Tomcat 5.5.25 to 6.0.26. After the upgrade the entire application is working fine except for EL expressions.
I was wondering if I am missing a JAR file or something.
Basically, I have prepopulated input text boxes that render the EL expression instead of its evaluated result. Example:
INPUT [#{sessionBean.result}] instead of INPUT [tedsResult].
Here are the JAR on my classpath:
tomcat/lib:
annotations-api.jar el-api-1.1.jar servlet-api.jar tomcat-i18n-fr.jar
catalina-ant.jar jasper-el.jar sqljdbc.jar tomcat-i18n-ja.jar
catalina-ha.jar jasper.jar tomcat-coyote.jar
catalina.jar jasper-jdt.jar tomcat-dbcp.jar
catalina-tribes.jar jsp-api.jar tomcat-i18n-es.jar
and in my WEB-INF/lib:
activation.jar hibernate-annotations.jar
antlr-2.7.5H3.jar iText-2.1.3.jar
asm-attrs.jar jakarta-oro.jar
asm.jar jaxen-1.1-beta-8.jar
avalon-framework-4.0.jar jaxrpc.jar
avalon-framework-cvs-20020806.jar jdom.jar
axis.jar jpdcFOP.jar
batik.jar jpdc_web.jar
cglib-2.1_3.jar jsf-api-1.2_12.jar
commons-beanutils.jar jsf-impl-1.2_12.jar
commons-codec.jar jstl.jar
commons-collections.jar jta.jar
commons-digester.jar jtds-1.2.jar
commons-discovery.jar log4j-1.2.13.jar
commons-el.jar logkit-1.0.jar
commons-fileupload-1.2.jar mail.jar
commons-io-1.3.1.jar openmap.jar
commons-lang-2.3.jar saaj.jar
commons-logging.jar standard.jar
commons-logging-optional.jar tomahawk.jar
cos.jar velocity-1.4.jar
CVS velocity-tools-generic-1.1.jar
dom4j-1.6.1.jar
el-impl-1.1.jar versioncheck.jar
ehcache-1.1.jar wsdl4j-1.5.1.jar
ejb3-persistence.jar xalan.jar
fop.jar xercesImpl.jar
hibernate3.jar xmlParserAPIs.jar
Any ideas what might be causing this problem? Thanks in advance for your help.
Edited by: tsteiner61 on Apr 14, 2010 11:05 AM

Hello tsteiner61,
Did you find a solution for your problem? I am asking because I have to solve a somewhat similar problem. Our system admin updated Tomcat from version 6.0.20 to 6.0.26 and now my JSF application wont evaluate EL expressions either.
I was using Mojarra JSF API Implementation 1.2_09-b02-FCS. Trying Mojarra JSF API Implementation 2.0.2-FCS I get the following error:
java.lang.UnsupportedOperationException
     javax.faces.context.ExternalContext.getResponseOutputWriter(ExternalContext.java:1228)
     com.sun.faces.application.view.JspViewHandlingStrategy.renderView(JspViewHandlingStrategy.java:182)
     com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:126)
     org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:101)
     org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:197)
     javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
     org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:176)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:127)
     com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
I am grateful for helpful advice.

Can Not Send Mail- what's going on?

Can download mail but can not send mail. With parallels on and xp pro I can easily set up outlook to send and receive mail. But no! The great Apple which is supposed to be easy can not send an email with the same settings. So, back to Windows to do what should be easy on a mac. I think that perhaps the new Safari or something messed this up.

If you'd like to approach the problem as something you don't understand, and also something that can be fixed, then you'll probably be able to set up your email account.
You say you have emails in the Outbox. I'd move them to another folder you create or delete them. In past experience, emails contain header information that includes mail server information, and sometimes they will never send (especially with Outlook Express), even if you get the account to work. You can try sending them again, once you get the account working.
Next, you need to make sure that you are sending the emails from a machine that is connected directly to RoadRunner's network. They may not work as a relay if you connect from another ISP. It's a port 25 problem that is common these days.
Now for the problem. If you are receiving emails properly, then the POP server information is correct. The mail program is designed to set up to some default settings that work with many servers, and during the process it will try to validate the settings you supply. This can take awhile, and can come up with a failure, due to a wrong assumption. Your email program is assuming that the email server requires authentication. This has been a problem with the RoadRunner system for years. Apparently, some windows email clients do not work the same way, go figure. They seem to have their own problems.
Many people have reported successfully setting up an account with RoadRunner, after first making sure they have the right SMTP server address. It can be different for different parts of the country.
After the email account is set up, and is failing to work, people go into the Mail/Preferences/Accounts/Account Information/Outgoing Mail SMTP Server - Click on the dropdown button - Choose "Edit Server List" - Advanced - Change Authentication to "None"
Here is a related thread with stories of success with RoadRunner: http://discussions.apple.com/thread.jspa?messageID=9128382&
After the changes, I'd quit and relaunch Mail. Not required, but good troubleshooting practice. Since there are no emails in the Outgoing Mailbox, create a short message and try to send.
I have different problems with different companies for both Mac's and Windows machines. The ISP always blames the OS, especially Leopard and Vista (since they work with more intelligent/advanced (maybe) settings. Besides the Authentication issue that pops up with some servers, there's also the occasional SSL variation and/or login name (sometimes it's the first part of the email address before the @ and sometimes it's the entire email address). Some ISP's block port 25, some do not. All of these settings can vary with each ISP, and can change on a whim (especially the port 25 problem), with working accounts going dark because of security changes at the ISP. Telephone Tech support at the ISP is often unaware of any changes in their system because they are not in the IT loop at the company and some will just go into "idiot" mode when you mention Macintosh. The first level support people are using a script on the phone, and their job is to make you go away...
I'm afraid the Great Apple, as you referred to them, is not able or hasn't focused on the ability to automatically set up accounts with every ISP. They appear to have made some assumptions that work with most servers. Who know's, next month the settings or assumptions may work, or Apple may update their setup script to make allowances specific to Time Warner, but since this has been a problem for over 3 years, I wouldn't hold my breath.
Google: leopard mail roadrunner problem = about 96,000 hits of all sorts.
Google: vista email roadrunner problem = about 1,410,000 hits of all sorts.
Google: windows xp email roadrunner problem = 243,000 hits of all sorts.
Looks like Apple's getting it's market share of problems with RoadRunner and Time Warner
My own local DSL is from a company named Centurytel. They are on their 4th email server setup in the last 5 years, and have finally contracted it out to a 3rd party company to administer. I just tell all of my clients to get a Gmail account and get over it. Let's see, a multi-billion dollar company who's reputation and income is based on service... free with 7GB storage, Webmail, POP and IMAP access, specific support for all major mail programs including Apple Mail, and alternate ports that get around ISP blocking. It seems that once you enable POP or Imap access in the webmail settings menu, Apple Mail and Vista seem to know the proper settings to use.
I'd setup the free Gmail account that will work with any ISP you use, before you get really attached to an email account with an ISP that could change as often as competitor's marketing allows. Also, my iPhone supports Gmail out of the box

Alert not sending mail even if executed successfully.

hi all,
I have created alert in R12 environment. it is periodic alert which will fire everyday.
There are 2 actions
1. Run the Concurrent program and insert values emp_no,emp_name,manager_name,manager_mail into custom table.
2. Send mail to manager_mail containing data like emp_no and emp_name.
I encapsulated both the action in one action set. Sequencing 1. Concurrent Program ( Detail Level) 2. Send mail (detail level)
When i am executing alert, it is ending with completed successfully. It is inserting data into custom table but it is not sending mail to manager mail id.
When i tried to check history, it is showing 'n' number of exceptions, but all those exception are not available in FIND EXCEPTION tab.
I m not able to find out, what exactly wrong i have done.
Query is:
Select emp_no,emp_name,manager_name,manager_mail into
&l_emp_no,&emp_name,l_manager_name,l_manager_mail from xx_alert_table_data;
and I am passing &l_manager_mail into 'To' section of send_mail action. it is not containing any null data. all the email address are present in that field.
please suggest if i m doing anything wrong.

Just putting the data into tables is not the actual process, performing the connection to the email server and sending email.
Underneath it's a multilayered process .
Oracle Alert uses Oracle Workflow Notification mailer for sending requests, which in turn uses mailer program to send mails.
So, you need first to check the state of Notification mailer then locate logs of the mailer utulity used by these and see whether there were any connection/negotiation errors and what information in header fields has been actually sent.
To see notification mailer program status change responsibility to Workflow Manager, then go to "Service Components" section and find there Workflow Notification process.
To find the mailer type, change responsibility to Alert Manager, then go to System->Options and see which mailer is in use.
Usually on Unix, sendmail is used, so you may easily turn on debug logging and see the mail headers and complete negitiation logs, if you need them.

Can Not Open Mail CNOM

-The application Mail quit unexpectedly. Mac OS X and other applications are not affected. Click Relaunch to launch the application again. Click Report to see more details or send a report to Apple.
The above error message appears after I attempt to open the Mail application. Recently the Mail icon was a question mark, however it was found but still clicking on it I can not open Mail. After attempting to click Relaunch twice in a row, during a third time the follow error message appears:
-Do you want to resent application settings for Mail? The application quit unexpectedly after itwas relaunched. Resetting the application settings may fix the problem. You will be givethe opportunity to restore your original settings when you quit the applications.
When I click Reset and Relaunch I am brought back the error mentioned I previously encountered first, ergo the whole problem beings again, and the same thing happens again when I click Relaunch.
When I click Ignore or Do Not Relaunch the application quits, of course. When I click Report the application sends a 'report' page.
Somebody please help me get my mail working again. Thank you.

Really? Nobody has any idea?

Data Services job rolling back Inserts but not Deletes or Updates

I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.

Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley

TS3276 Mail account set up. Can not receive mail-Everything is green in Connection doctor but when checking activity it shows stop signs. Was able to receive mail until last week then all of a sudden stopped receiving mail but no changes were made.

My mail account has been set up and working to send and receive mail for several months. All of a sudden I can not receive mail. The connection doctor shows all green lights. No changes have been made and nothing has been changed on preferences on IMAP and SMTP. I can send mail. My other accounts all send and receive mail. When you click on activity the list shows stop signs. All accounts show that they are online.

UPDATE:
I deleted all the messages off the server of the offending email address and everything works fine now.

Inserted expression not in mail

Similar Messages

Maybe you are looking for