Inserting a list with 1 query

Hi
I have a list of email addresses seperated by a comma.
I want to insert all of those email address into a table using 1 query.
Is that possible?
Here is my the list i have...
<Cfset mylist = "[email protected],[email protected],[email protected],[email protected],[email protected]">
Is it possible to insert using 1 query?
Thanks in advance.
Regards
Delon

Hi Delon
I see now exactly what you're getting at and I see what you mean by only wanting to do one insert.
People have different styles and I always believe that if it works then it's a successful solution, but just to make you aware of other options: If it were me (and I know it's not, but this is my opinion and there's no-one here to stop me ) I'd do the following:
Get emails
Loop query (very efficient in CF)
Try
    Do whatever processing necessary, REFinds, auditing etc
    Do an insert into your database - also very efficient
    Delete email from inbox
Catch
    Error handler
End try
/End Loop query
So yes you're doing lots of inserts but you're not using any List functionality. Bear in mind lists aren't like Arrays or Querysets - there are no fixed memory points CF can index in order to find the next value, it has to scan through character by character looking for your delimiter. I've always been advised to keep away from lists for this very reason, especially if they get quite long as in this case.
This method also allows for error handling on an email-by-email basis - say you use a list; you loop however many emails and something goes wrong at the last index. Your script falls over and has to start again from the start. Using the try/catch methodology gets around this and means you don't end up reprocessing the same emails more than once.
As I say it largely ends up the same, but the whole point of these forums is to make people aware of what's possible, not to tell them what to do.
Hope that helps.
O.

Similar Messages

Select list with redirect and save the item to insert row

On the Form, I want to select from the item (P105_ADMIN_DOMAIN_ID)
and pop the result on the item (P105_ADMIN_NAME).
P105_ADMIN_DOMAIN_ID define:
Display as "select list with redirect"
Alternate source used "Only when .."
Source Type "Database Column"
Source Value or express "ADMIN_DOMAIN_ID"
P105_ADMIN_NAME define:
Display as "Text Field"
Altrenate source used "Only when .."
Source Type "SQL Query"
Source Value or express "select party
from responsible_party
where logonid
= :P105_ADMIN_DOMAIN_ID"
questions:
1. item P105_ADMIN_DOMAIN_ID DROP DOWN LIST is limited to
some threadhold, it did not list all the value from
the LOV which is follow:
select LOGONID d, LOGONID r
from RESPONSIBLE_PARTY
order by 1
2. I want to insert a row after complete the form.
But my item P105_ADMIN_NAME is defined
Source Type "SQL Query" instead of the 'Database
Column'
How could I overcome these?
Thanks so much for your help.

1) what i meant was for you to test this ridiculously huge LOV outside of htmldb, but it occurred to me last night that you could, in fact, be hitting a limit of ours. after some poking around, i have confirmed that. select list items in htmldb are currently limited to 10,000 rows. this was initially done for performance reasons, but they're now opening up the restriction. if you really need to work with that many rows where the user is allowed to pick from a set of values, consider using a popup item type instead. it'd help your app performance as well (in my test cases, it stank to have to wait for my 10k select list rows to come down to my browser).
2) sorry to not have been more clear about this, but when you set your item's "Source Type" back to "Database Column", you'd have to specify that column in the "Source or value expression" field. also, you can't put a sql query into that "Post Calculation Computation" field. as i said before, "you can take a look at the attribute-level help for that field to see implementation examples."
3) stick with "Always..." for now if you're using our auto-dml process(es)
regards,
raj

How to insert autoincrement record and query it with multiple keys

Hi all,
I am not familiar with BerkeyleyDB, I am now doing a project that needs to insert records and then query it out with multiple keys at later time. Since there is no field that can be distinct primary key, I want to user DbSequence as auto increment primary key to db, and set other index keys as secondary db, then using join cursor to do query with multiple keys.
I don't know how to use DbSequence, can anyone direct me to a example of using DbSequence as auto increment primary key?
Regards
-Bruce

I figured out the method to insert record with auto increment primary key. I listed the code block below:
char m_SeqNamePositions[32] = "MyPositions";
DbSequence *m_pSeqPositions;
m_pDBPositions = new Db(NULL, 0);
          m_pDBPositions->open(NULL, pszFileName, szFileName, DB_BTREE, DB_CREATE, 0);          // 无数据文件
          m_pSeqPositions = new DbSequence(m_pDBPositions, 0);
          Dbt key((void *)m_SeqNamePositions, (u_int32_t)strlen(m_SeqNamePositions));
          m_pSeqPositions->open(NULL, &key, DB_CREATE);
db_seq_t SeqNum;
     m_pSeqPositions->get(0, 1, &SeqNum, 0);
     Dbt key((void *)&SeqNum, (u_int32_t)sizeof(SeqNum));
     Dbt data(pRecord, sizeof(*pRecord));
     return m_pDBPositions->put(NULL, &key, &data, DB_NOOVERWRITE);
m_pSeqPositions->close(0);
          m_pDBPositions->close(0);
delete m_pSeqPositions;
delete m_pDBPositions;
          m_pDBPositions = NULL;

SharePoint 2013 List View with query string filter stops working after editing view from browser

I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Join two list with condition using caml query in SharePoint 2013 with client object model

Hi,
Want to join two list to get all fields from both list.
Am new to sharepoint and sharepoint 2013. Am working in sharepoint 2013 online apps. Am using context.executeQueryasync to load list and get items from list. Am able to get items from single list with caml query, but not able to get both list field values
with joins. I did lot of surfing..but not..
Below is my code..
ListName1 : "AssignedTasks"
ListName2 : "Tasks"
var assignedQueryTest = "<View><Joins><Join Type='INNER' ListAlias='Tasks'><Eq><FieldRef Name='TaskId' RefType='Id'/><FieldRef List='Tasks' Name='ID' /></Eq></Join></Joins>"
+ "<ViewFields><FieldRef Name='TitleValue' /><FieldRef Name='ActionItemsValue' /></ViewFields>"
+ "<ProjectedFields>"
+ "<Field Name='TitleValue' Type='Lookup' List='Tasks' ShowField='Title' /><Field Name='ActionItemsValue' Type='Lookup' List='Tasks' ShowField='ActionItems' />"
+ "</ProjectedFields>"
+ "</View>";
var web = context.get_web();
var list = web.get_lists().getByTitle("AssingedTasks");
var myQuery = new SP.CamlQuery();
myQuery.set_viewXml(assignedQueryTest);
var myItems = list.getItems(myQuery, "Include(TitleValue,ActionItemsValue)");
context.load(myItems);
context.executeQueryAsync(function () { if(myItems.get_count()>0){....}
}, errorCallback);
Here am able to get "AssignedTasks" list field values but not able to get "Tasks" list field values.
Can you please help me to resolve the issue. Or new idea for join. I have add the condition also in the query.
If anybody have good sample, please provide.
Thanks,
Pariventhan
Pariventhan.S

Hi Pariventhan,
I don't know about join but I have a workaround of this problem.
Declare one variable (itemcollection) globally. Load all the items "AssignedTasks" using context.load.
In the success method call another CAML query using <IN> tag of the ID of the items from the second list (Assuming you have look-up column of the ID of the first list to the second list).
If this is not clear to you then please let me know. If possible then I can provide code sample.
Thanks,
Aniruddha

Building Cascading Lists for Query Screens with ADF Business Components.

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first working fine, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

Building Cascading Lists for Query with ADF Business components and JSP

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first Ok, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Excuse me for my English.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

How to query the sharepoint list with using lookup column

hi,
I have requrement like below
List A
Title Postionid(Lookup) PositionDescription
[email protected] 1
xxxx
[email protected] 1
xxx
[email protected] 1
xxx
[email protected] 2
sss
[email protected] 2
www
List B
Title fistname lastname age fathername
[email protected] x x 10 y
[email protected] p p 12 p
[email protected] q q 12
y
here in List A positionid is lookup column i have creating one visual web part i am querying the List A using query string as Positionid in that web part .finally what i want is i need date from list B on basis of corresponding position id here
List A Title and List B title are same i need each candidate info how can i do it
Srinivas

Hello,
Still you have not told that whether Position id is there in listB or not. Anyway if Poistion id is not there in list B then you have to use Title column of listA to gete data from ListB. Look at sample code below. It will first get data from ListA,
and use StringBuilder class to create dynamic CAML query because one Position id is having multiple values in listA.
query.Query = "<Where><Eq><FieldRef Name='Postionid' /><Value Type='Lookup'>1</Value></Eq></Where>";
SPListItemCollection items = list.GetItems(query);
if(items.Count > 0)
foreach(SPListItem item in items)
string strTitle = Convert.Tostring(item["Title"]);
//since listA is having multiple values for Postionid so you have to build a dynamic query here to get data from listB
//Refer link to build dynamic query
SPQuery listB = new SPQuery ();
query.Query = stringbuilder;
SPListItemCollection ListBitems = listB.GetItems(query);
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2dfe5fd6-e556-4132-a35c-e9f240360307/issue-with-caml-query?forum=sharepointdevelopmentlegacy
http://sharepoint.stackexchange.com/questions/69690/foreach-loop-inside-caml-query
Above links will help you to create dynamic query (in your case you need to use multiple <OR> operator in listB.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Can we have the 'select list with submit' type within a tabular form?

An item can be the "Select list with submit' type so a form has no problem with it. However, when I built a tabular form manually, I couldn't find this type. There are only three types avaiable: "named", "static", and "dynamic".
Is it possible to have the "submit" type so columns of the tabular form can be dynamically rendered based on the user inputs?
Another question I have is how to dynamically build the tabular form with decode func. For example, if the value of col_1 is 'val_1', then build a select list in col_2; otherwise null in col_2.
I tried to use
select col1,
decode (col1, 'val_1', select htmldb_item.select_list_from_lov(2, first, 'lov1') from dual, null)
from....
where....
But it didn't work.
I'd like to know whether it's feasible to have something like that.
TIA.
Message was edited by:
Luc

You could use a region of type PL/SQL function
returning SQL query to dynamically build this kind of
tabular form. However if you want to use the built-in
multi-row insert, update and delete processes, all
items in a column must have the same display type. Marc, thanks for the quick reply. I appreciate it.
I got your idea. However, I need to have the javascript 'ToggleAll' as the heading so the form works as same as the built-in one. If I put the query definition into a pl/sql procedure, where I can put this html tab attribute? It can not be inside the checkbox function, otherwise the checkbox of any row would act as same as the header.
I hope I've made this clear.
To Vikas: It's our clients who want this, not us. :(

Problem with query based LOV

Hi,
Maybe someone could help me with the following. I think it is a shortcoming of HTMLDB, but I'm not sure.
I've got a Select List item, P10_PERSON, which resides in a tabular form. The Select List is based on a query, say:
select name   display_value
,      id     return_value
from   personAs is should be, P10_PERSON shows only the names.
When my action is an insert or modification, the results will be writen in the table PERSON_MEETING.
Now I want to make sure that the same person coulden't be selected a second time for the same meeting. So I alter the query based LOV with the following:
select name   display_value
,      id     return_value
from   person
where id not in (select person_id
                  from   person_meeting
                  where meeting_id = :P10_MEETING_ID)This sounds correct and works in Designer, but not in HTMLDB. The NAME isen't shown anymore, instead the ID is shown in the page.
Is this because the person doesen't actually exists anymore in the LOV after it has been saved (stored in PERSON_MEETING)? If so, does anyone knows a work-around?
Thx!
Message was edited by:
F. Klein
(removed typing error)

I've got 3 tables. PERSON, MEETING and PERSON_MEETING.
They have the following structure:
# PERSON            #
# ID   NUMBER       #
# NAME VARCHAR2(50) #
# MEETING                   #
# ID          NUMBER        #
# DESCRIPTION VARCHAR2(100) #
# PERSON_MEETING    #
# ID         NUMBER #
# PERSON_ID NUMBER #
# MEETING_ID NUMBER #
#####################In PERSON there are 3 records, in MEETING there is only 1.
PERSON:
ID     NAME
1      KEVIN
2      BILL
3      JOHN
MEETING
ID     DESCRIPTION
1      DEVELOPERS MEETINGNow I want to link the persons to a meeting in the PERSON_MEETING table.
The column MEETING_ID will be filled automatically through a variable or parameter (I don't know the exact term).
I defined the PERSON_ID column as an query based select list with the query:
select name   display_value
,      id     return_value
from   personThis works perfectely, the select list (or lov) shows KEVIN, BILL and JOHN. When I select BILL and save my adjustment, the following record will be shown in PERSON_MEETING
PERSON_MEETING
ID     PERSON_ID     MEETING_ID
1      2             1Now that I inserted BILL as a participant for the Developers meeting he should be removed from the select list. Only KEVIN and JOHN should be in the list. Therefore I change the query of the select list into:
select name   display_value
,      id     return_value
from   person
where id not in (select person_id
                  from   person_meeting
                  where meeting_id = :MEETING_ID):MEETING_ID is the item in the page containing the ID of the meeting.
When I make this adjustment, the select list only contains KEVIN and JOHN (as it should), but the first record shown on the page (record with BILL) doesen't show BILL anymore, instead his ID will be shown (2)...

Using a Select list with Submit

I am trying to use the select list with Submit on my page.
I have 3 select lists.
On the first one,I am showing the list of all jacks.
When the user selects a jack from the first list, I want to show all the jacks except the one which was selected.
When the user selects a jack from the second list, I want to show all the jacks except the ones selected in the first list and the second list.
I have created the select lists with submit and then I have put the query for getting the jacks. I created an unconditional branch. I am also passing the variables so that I can set the values of the items on submit.
I also created a computation as mentioned in one of the OTN discussions, and have mentioned the value of second list to be calculated from the first and 3rd from first and second.
But after clicking the first select list, I am losing all the existing values on the first page. I wonder what I am missing here. Can anyone hellp?
Thanks,
Gargi

Gargi,
In this case using 'select list with redirect' makes more sense rather than with SUBMIT. So change all the select lists to 'select list with redirect' (it redirects to same page inserting 'select list' value session state).
Now for the 2nd select list query add a condition in where clause like
WHERE sl_col != :P1_SL1And for the 3rd select list query add a condition in where clause like
WHERE sl_col NOT IN (:P1_SL1, :P1_SL2)Hope it helps :-)
Cheers,
Hari

Chart based on Select list with submit Lov problem

Hi,
I have one page with interactive report showing username with links, date and
database actions.
Another page contains one region having flash chart based on select list with submit Lov.
The lov is created by dynamic query.
Every time when i click the 1st page report link, the 2nd page lov is populating the value automatically. But the problem is chart displays NO DATA FOUND message though the LOV has many values.
I don't want to display any null values so set to NO for LOV
I tried to write Before header computation (PL/SQL Function Body) to set the lov value, but the query is displayed as such.
I don't want to assign any static default value also as the values are dynamic for every link.
The following is my Before header computation of Select list with submit (Item name is p11_schema). (PLSQL Function Body)
begin
if :p11_schema is null then
return 'select distinct owner schema1, owner schema2 from auditing
where access_date=' || :p11_access_date
|| ' and username=' || :p11_username
|| ' order by owner';
end if;
end;
This is my chart query.
select null link, obj_name label, sum(sel_count) "Select", sum(ins_count) "Insert", sum(upd_count) "Update", sum(del_count) "Delete" from auditing
where username=:p11_username
and access_date=:p11_access_date
and owner=NVL(:p11_schema, OWNER)
group by owner, obj_name
Example: If there more than one records in the lov, the graph should display the 1st record. When i select another record, the chart accordingly display the selected values. But inially it should not display "NO DATA FOUND" message.
I tried using all the combinations of computation type for the lov, SQL query ( I could not use if conditon then), PLSQL expression, PLSQL function body. But it does not work out.
Can anyone please help me out.
Thanks.

Hi Scott,
Thanks for your reply.
I found out the solution for this problem as below.
But i did it in different way to tackle the dynamic query wich returns more than one record using rownum always the 1st record when it is empty instead of assigning constant (static) value like '1'. And i am returning LOV itself for both null or not null condition as below.
Declare
q varchar2(4000);
begin
if :p11_schema is null then
q:='select distinct owner schema from auditing';
q:=q || ' where username=:p11_username ';
q:=q || ' and access_date=:p11_access_date ';
q:=q || ' and rownum<2 order by owner';
Execute immediate q into :p11_schema USING :p11_username, :p11_access_date;
end if;
return :P11_SCHEMA;
end;
Thanks.

Problem with query for Oracle

Hello Experts,
I'm tryng to develop my first application for EP (v7 SP12) with NWDS (without NWDI).
This application has to read and write data in the EP DB (oracle v10).
I'm using:
a Dictionary Project (define the DB Tables)
a Java Project (define class as DAO, DBManager etc)
a Library Project
an EJB Project
an EAR Project
With these projects I can deploy a webService in my EP server.
BUT I have some problem with a query that I'm tryng to sent to my DB through a DAO Class called by my WebService.
The query is simple and correct but it does not work...
This is the error message returned (the query id in bold)
(column names: GIORNO, NOMEDITTA, NOMEAREA, NOMESETTORE)
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 21 Sep 2007 14:29:57 GMT
Set-Cookie: <value is hidden>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>java.sql.SQLException: com.sap.sql.log.OpenSQLException: The SQL statement "SELECT NOMESETTORE, MIN(? - "GIORNO") AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE" contains the syntax error[s]: - 1:25 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</faultstring><detail><ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException xmlns:ns1='urn:GiorniSenzaInfortuniWSWsd/GiorniSenzaInfortuniWSVi'></ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
The variable '?' is the today date, the difference "(?-GIORNO)" is an int..
Moreover in my DAO class the query is "SELECT NOMESETTORE, MIN(? - GIORNO) AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE", instead in the error message is reported MIN(? - "GIORNO")...
We have tryed also with alternative query, for example we used "MIN(SYSDATA - GIORNO)" but SYSDATA was interpreted as column name and not found....
Any help???
Best Regards

Hi, I found something about the Host Variable (http://help.sap.com/saphelp_nw70/helpdata/en/ed/dbf8b7823b084f80a6eb7ad43bdbb9/content.htm), there explain that if you want to use an host variable you have to put ':' as prefix..
My problem is that I need to extract the minimum of the subtraction between two dates:
Query MIN(? - GIORNO) --> Error: the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)
So I tried to use the ':' as indicated in the manual..
MIN:(? - GIORNO) --> - SQL syntax error: the token ":" was not expected here
 - expecting LPAREN, found ':'
MIN(:(? - GIORNO)) --> - 1:25 - Open SQL syntax error: :PARAMETER not allowed
 - 1:26 - SQL syntax error: the token "(" was not expected here
 - 1:26 - expecting ID, found '('
Then I tried to avoid the MIN() function and I tried to do just the subtraction:
? - GIORNO --> - 1:21 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)
:(? - GIORNO) --> - 1:21 - Open SQL syntax error: :PARAMETER not allowed
 - 1:22 - SQL syntax error: the token "(" was not expected here
 - 1:22 - expecting ID, found '('
'2007-09-24' - GIORNO --> - 1:34 - SQL syntax error: first argument of operator "-" must be a number, date/time or interval
 - 1:43 - SQL syntax error: arguments of operator "-" do not have correct types
 - 1:43 - SQL syntax error: derived columns in SELECT list with AS must be values
GIORNO - GIORNO --> - 1:21 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated
 - 1:30 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated
Why these parts of query are not accepted???
I don't understand why... I hope you can help me.
Best Regards
Alessandro

How to get TDS Vendors list with name

Hellow Friends,
I want to get only TDS vendors list with Respective names.I have used Table LFBW.There i am getting only TDS Vendor codes list not comming with names.
Is there any Table or T.Code or Report to get TDS Vendors list with names?
Please Advice me.
Thanks&Regards
Kumar

Develop a query joining table LFA1 & LFBW on primary key as LIFNR. in the out put have the TDS Vendors with name and TDS Code
Assign points if useful
Regards

How do I create an unordered list with three items and link to id's

How do I create an ordered list with three items and linl to id's on my page

Thanks, I guess what I was really asking, Is there a n option in the insert menu or somewhere where Dreamweaver does it for you.
I am not clear on what you are wanting DW to do for you? Is it that you want it to insert a three item unordered list? No - there's no such function. You would need to click in Design view where you want the list to go, click on the bulleted list icon on the Property inspector, and then enter the three items separated by carriage returns. Then you'd have to link each item specifically.
To enter the named anchors to element ID values, CS5 has no way to do this. You'd have to enter those links manually.

Inserting a list with 1 query

Similar Messages

Maybe you are looking for