Inserting url isn't working

Not sure if this is the right place to report bugs, but...
In the message compose window there's a button to insert a link.
Unfortunately, the syntax it inserts for the link is not the correct
link syntax.
What you get is
{noformat}
link
{noformat}
What's required is
{noformat}
[url http://www.oracle.com]link
{noformat}

Yes, that's unfortunate; it's been reported already, e.g. [url http://forums.oracle.com/forums/thread.jspa?threadID=1134118&tstart=0]there, and probably longer ago too.
Since I've been on this forum though, I haven't seen any official answer from the maintenance team about fixing forum software bugs...

Similar Messages

Insert statement will not work if select statement has less number of colum

Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshad

user13360241 wrote:
Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshadmore often than not "TEMP" tables are NOT required & are highly inefficient in Oracle.
Either only specify explicit column in TEMP to get data,
or provide value for "extra" column in TEMP

My speaker isn't working. How do I fix it?

My iPod speaker isn't working and only happens to work when I use my headphones. I would like to fix my speaker, how can I fix this problem??

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Do i have to send my iPod in if the headphone jack isn't working?

do i have to send my iPod in if the headphone jack isn't working?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Why blocking sites using Hosts file isn't working?

Hello
I need to block a few websites on my home computer. Did a quick search and found out I had to work with the hosts files. So opened up Notepad, ran it as Admin and then opened Hosts and at the bottom added ' 127.0.0.1 facebook.com' then saved the file. But
facebook is still opening when I go to the page.
can someone tell me why using the Hosts file isn't working?
I did read somewhere that it might have something to do with security features on my system. FYI, I m using a trial version of Norton Anti Virus and I am running a Windows 7 machine.
Thanks. Any help would be appreciated.

Are you sure your entry was in fact saved to the hosts file? The hosts file on my computer blocks unwanted sites.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Yes
This is a copy paste of CMD.exe. It shows what's in the host files.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\mehdi>cd C:\windows\system32\drivers\etc
C:\Windows\System32\drivers\etc>dir \a-d
Volume in drive C is Gateway
Volume Serial Number is B291-A8C6
Directory of C:\
File Not Found
C:\Windows\System32\drivers\etc>dir /a-d
Volume in drive C is Gateway
Volume Serial Number is B291-A8C6
Directory of C:\Windows\System32\drivers\etc
10/23/2010 01:06 PM 846 hosts
06/10/2009 02:00 PM 3,683 lmhosts.sam
06/10/2009 02:00 PM 407 networks
06/10/2009 02:00 PM 1,358 protocol
06/10/2009 02:00 PM 17,463 services
5 File(s) 23,757 bytes
0 Dir(s) 936,919,461,888 bytes free
C:\Windows\System32\drivers\etc>type hosts
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
127.0.0.1 facebook.com
C:\Windows\System32\drivers\etc>

On Yahoo Mail, the "insert link" function stopped working

For the past few months, the "insert link" function doesn't work properly when trying to insert a link into a message. It inserts the link in the wrong place. For example if i paste the following text into a message:
Regards,
Jeff
http://mywebsite.com
and then if i highlight the URL, copy it, click the "insert link" icon, and paste the URL, it does something crazy like this:
Regards,http://mywebsite.com Jeff
or it makes the entire 3 lines of text a clickable link, instead of just the URL.
It works fine in Internet Explorer.
Things i've tried in Firefox 26.0:
- disabled all add-ons (then restared browser)
- cleared cache
- cleared all Yahoo cookies
By the way, in Internet Explorer, pasted URLs automatically appear as links in Yahoo Mail without having to click "insert link". I wish Firefox enabled this, because it's very time consuming to manually create lots of links. Any plans for improving this?

I'm struggling to understand the difference between tabbing into the message body and clicking in it. I typed ''I'm mystified!'' and then copied the HTML as of that point. Then I selected mystified and added a link, and copied the new HTML (attributes of the initial div tag removed):
(1) Before adding the link
(A) Tab in
<div>'''I'm mystified!'''<br><br><p id="yui_3_13_0_ym1_13_1390977543218_8"><span><br class="yui-cursor"></span></p><br><div id="yui_3_13_0_ym1_13_1390977543218_10"> </div><br><div id="yui_3_13_0_ym1_13_1390977543218_12">'''-Jefferson'''</div></div>
(B) Click in
<div><p id="yui_3_13_0_ym1_12_1390977543218_8"><span id="yui_3_13_0_ym1_12_1390977543218_15">'''I'm mystified!'''<br class="yui-cursor"></span></p><br><div id="yui_3_13_0_ym1_12_1390977543218_10"> </div><br><div id="yui_3_13_0_ym1_12_1390977543218_12">'''-Jefferson'''</div></div>
(2) After adding the link
(A) Tab in
<div>'''I'm''' <a href="http://asdf"><font id="yui_3_13_0_ym1_13_1390977543218_16">'''<u>mystified</u>'''</font></a>'''!'''<br><p id="yui_3_13_0_ym1_13_1390977543218_8"><span><br class="yui-cursor"></span></p><br><div id="yui_3_13_0_ym1_13_1390977543218_10"> </div><br><div id="yui_3_13_0_ym1_13_1390977543218_12">'''-Jefferson'''</div></div>
(B) Click in
<div><p id="yui_3_13_0_ym1_12_1390977543218_8"><a href="http://asdf"><font id="yui_3_13_0_ym1_12_1390977543218_18">'''<u>mystified</u>'''</font></a><span id="yui_3_13_0_ym1_12_1390977543218_15">'''I'm !'''<br class="yui-cursor"></span></p><br><div id="yui_3_13_0_ym1_12_1390977543218_10"> </div><br><div id="yui_3_13_0_ym1_12_1390977543218_12">'''-Jefferson'''</div></div>

Keep with Following Paragraph isn't working

I am creating a doc in Word Processing Mode with various Styles. My header Styles all have Keep with Following Paragraph checked to keep them with the body text. Unfortunately, this isn't working – at page breaks I have headers that sit at the bottom of one page and their body text is at the start of the next page.
Any idea what's going on and how I can fix this? It's a 300 pg doc so I'd rather not have to fix them manually.
thanks in advance,
Dancing Sweetpea

Update: It's only happening when I have a shape before it (I have some grey call out boxes in the doc) and the insert for the box is at the beginning of the header line. If I move it, it fixes the problem. Silly me.
But I do have a related question. I have inline images (with a left justified wrap) that sit to the left of a text header — the two go together as a image/text header. The image is slightly smaller in height than the text, so if the image/text header happens to be at the very end of a page, the text moves to the top of the next page (b/c it has a keep with following paragraph) but the image stays at the bottom of the previous page. Is there any way to lock the image to the text header or otherwise keep the two together if they fall at a page break?

MediaLookup isn't working in a certain JSP file

Hi there!
This is my first time around here (I was in the original ATG Forum though) and I'm looking for your guidance about this odd behavior in my project...
I'm using MediaLookup droplet to show an image in the home page. This is the code I'm using:
     <dsp:droplet name="/atg/commerce/catalog/MediaLookup">
          <dsp:param name="id" value="defaultIMGProd"/>
          <dsp:setvalue param="media" paramvalue="element"/>
          <dsp:oparam name="output">
               <dsp:getvalueof var="imageURL" vartype="java.lang.String" param="media.url"/>
               <c:if test="${not empty imageURL}">
                    <img height="80px" width="80px" src="${imageURL}"/>
               </c:if>
          </dsp:oparam>
     </dsp:droplet>
And it works fine...
But when I copy the same code in a different JSP (to show this same image in the catalog, next to each product), it doesn't work at all, and it throws this error message:
12:30:41,485 INFO [MediaLookup] DEBUG Find item: id=defaultIMGProd; type=media
12:30:41,486 INFO [MediaLookup] DEBUG Item Found:media-internal-binary:defaultIMGProd(/ContenidoAdministrable/Catalogo/defaultIMGCatProd.jpg)
12:30:41,486 ERROR [DynamoServlet] atg.servlet.ServletResources->dynamoHttpServletRequestCantAccessProperty : getParameter(media.url) can't access property url in class atg.adapter.gsa.GSAItem
I just can't think on a reason why this is working in one JSP but isn't working in other one...
Any suggestions will we appreciated :)
Thanks!
Waldo.-
Edited by: user12845432 on 25-may-2012 9:41

Hi ,
The issue may be because you are using paramvalue="element" .
In the new jsp element may be referring to something else , due to nesting of droplets.
its better to use elementName attribute :
eg :
You may be using like this :
<dsp:droplet name="XYZ">
<dsp:param name="inputparam" param="inputparam" />
<dsp:oparam name="output">
<dsp:droplet name="/atg/commerce/catalog/MediaLookup">
<dsp:param name="id" value="defaultIMGProd"/>
<dsp:setvalue param="media" paramvalue="element"/>
<dsp:oparam name="output">
<dsp:getvalueof var="imageURL" vartype="java.lang.String" param="media.url"/>
<c:if test="${not empty imageURL}">
<img height="80px" width="80px" src="${imageURL}"/>
</c:if>
</dsp:oparam>
</dsp:droplet>
</dsp:oparam>
</dsp:droplet>
Instead use like this :
<dsp:droplet name="XYZ">
<dsp:param name="inputparam" param="inputparam" />
*<dsp:param name="elementName" value="mediaItem" />*
<dsp:oparam name="output">
<dsp:droplet name="/atg/commerce/catalog/MediaLookup">
<dsp:param name="id" value="defaultIMGProd"/>
*<dsp:setvalue param="media" paramvalue="mediaItem"/>*
<dsp:oparam name="output">
<dsp:getvalueof var="imageURL" vartype="java.lang.String" param="media.url"/>
<c:if test="${not empty imageURL}">
<img height="80px" width="80px" src="${imageURL}"/>
</c:if>
</dsp:oparam>
</dsp:droplet>
</dsp:oparam>
</dsp:droplet>
~ Praveer

The inserted media isn't writable

Yes, indeed. This is the reason I can't archive my iMovie projects (iMovie HD 5.0.2(111)). The route is File/Burn Project to Disc... followed by a window: "Create a Project Archive?", click "OK", the Burn window prompts you to insert the DVD, and after about 8 seconds you get the message "The inserted media isn't writable".
I am able to burn DVDs everywhere else with the same disks (Maxell DVD+R). I have only 13 GB of space left on the hard drive, and painstakingly ridding as much as I can right now. Is the lack of space the problem? The movie is 2.56 GB. Is there anything else I can do? I have already run Onyx and Mac-sweeper. Should I trash any preferences? Which ones?
Thanks a bunch.
PowerMac G5 Mac OS X (10.3.9) twin 2.5 gHz processors 1.5 GB DDR SDRAM

jjjw:
Do you have a DV camera that you can export to? I know this sounds like a lame way of going about doing this, but if you could share back to DV Tape and then delete the original project and re-import to a new one, the file size will be smaller and then you may be able to work with it.
However, the down side is that you will not be able to edit any transitions or titles once this is done (which may defeat the purpose you are trying to achieve...)
Obviously,I'm still looking for an answer...
-----BTW---did you ever try using a different brand of DVD-R?
Sue
Message was edited by: SDIllini

TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!

Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

For the second time (I've been to the Genius Bar once already) my WiFi isn't working on my iPhone 4S. This is really infuriating and costly!!! I see others have the same issues. Can't Apple do anything about this? It's obviously a hardware problem!

For the second time (I've been to the Genius Bar already once with this) my Wifi isn't working. They gave me a new iphone last time, but the new one has the same issue as the old one, I'm guessing. I've tried resetting the network but that doesn't work.
I see others have this issue too.
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
Currently it's not costing me anything - yet - because I've got the Apple Warranty but this is totally frustating!!! I bought the original phone (which has been replaced in July 2012. The new phone (without working Wifi) is a month old.
Will try Restore via ITunes before (I will invariably) have to return to the Genius Bar for another Iphone 4S unless someone has an ingenius solution here?..?

sematson wrote:
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
For what reason, other than making yourself look foolish, would you ask questions that we users could not possibly answer as we're NOT Apple?
Basics from the manual are restart, reset, restore from backup, restore as NEW. Nothing more "ingenius" to suggest than these steps that Apple has outlined in the manual. If these steps don't work, then go back to the Apple store.

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open. HELP!

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open, getting error messages but can't fix myself. Can anyone help??

iPad can connect only in one iTunes Library. If you want to connect it to a iTunes Library then you have to erase it. You can erase it from iTunes. Make sure you iPad doesn't have a password, or if it has a password make sure that you connect to the computer and enter the password of your iPad

I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
It started after the major update to iOS 7.
I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
My iPad 4 is not affected with the problem and works as it should.

To delete, tap "Edit" (tap to enlarge image)

Multilingual URL is not working in IE11

Multilingual URL is not working in IE11 same URL is working with other browser. Would like to know whether Arabic URL is supported in IE11?

Hello,
See this http://windows.microsoft.com/en-gb/windows-vista/change-your-internet-explorer-language-settings and follow the steps given
there. After that let us know whether it is working now or still not.
"Solution is to enable Send
IDN server names for non-Intranet URLs under
advanced settings. " This is also a solution.
Thanks Prakash
Varghese!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Inserting url isn't working

Similar Messages

Maybe you are looking for