Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database
Hello,
One of my Lync 2013 standard front-end servers is frequently logging this error:
Log Name: Lync Server
Source: LS Data Collection
Date: 28/12/2012 10:04:05
Event ID: 56208
Task Category: (2271)
Level: Warning
Keywords: Classic
User: N/A
Computer: LYNC-FE2.mydomain.local
Description:
Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database.
Component: CDR Adaptor
Cause: This is an expected condition if too many error reports of the same type were reported at the same time.
Resolution:
No action is needed. A large enough number of error reports of this type have already been inserted into the database and can be used for troubleshooting and reporting. Additional errors are not inserted to avoid flooding of the database with redundant information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Data Collection" />
<EventID Qualifiers="35039">56208</EventID>
<Level>3</Level>
<Task>2271</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-12-28T10:04:05.000000000Z" />
<EventRecordID>10745</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>LYNC-FE2.mydomain.local</Computer>
<Security />
</System>
<EventData>
<Data>CDR Adaptor</Data>
</EventData>
</Event>
I don't appear to have any problems or issues with Lync at all. Full Enterprise Voice is in use at this site.
Anyone know why this may be occuring?
Thanks,
Ben
Did you check any additional errors? I'm seeing the same issue and linked it to this actual error message that seems to point towards a broken data model or bugged type casting/checking in the interface:
Failed to execute a stored procedure on the back-end.
Component: CDR Adaptor
Stored Procedure: RtcReportError
Error: System.Data.SqlClient.SqlException (0x80131904): Error converting data type varchar to float.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Rtc.Common.Data.DBCore.Execute(SprocContext sprocContext, SqlConnection sqlConnection, SqlTransaction sqlTransaction)
ClientConnectionId:xxxxxxxxxxxxx
Cause: Configuration issues, an unreachable back-end or an unexpected condition has resulted in the error.
Resolution:
Verify the back-end is up and this Lync Server has connectivity to it. If the problem persists, notify your organization's support team with the relevant details.
Similar Messages
-
When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?
http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
So now Im getting a new error report. I named the instance of the button in the properties panel btn_ccbil.
Here is the code I have now:
import flash.net.URLRequest;
var url:String = 'http://www.lexiefyfe.com/ccbill9001/index.htm';
btn_ccbil.addEventListener(MouseEvent.CLICK, onOrderClick);
function onOrderClick():void
var request:URLRequest = new URLRequest(url);
try {
navigateToURL(request, '_blank');
} catch (e:Error) {
trace('An error occurred');
Here is the error report:
Scene=photogallery, layer=buttons, frame=1, Line 7 A type identifier is expected after the ':'.
Scene=photogallery, layer=buttons, frame=1, Line 9 The class or interface 'flash.net.URLRequest' could not be loaded.
This is the original code for the billing from ccbill I am trying to get to work with flash:
<A HREF="http://www.lexiefyfe.com/ccbill9001/index.htm"><img src="ccbutton.jpg"></A>
Is this just something that flash can't do? If so will someone please let me know. I am running in circles at this point and very frustrated... I'm new to as3 but I thought it could work.
Thank you to all for the help and consideration,
ThomasYou appear to be using AS3 code in an AS2 setting. Go into your Publish Settings and change the actionscript version to AS3 in the Flash section.
Other matters...
You do not need to import the URLRequest class while coding in the Flash IDE.
You need to put an argument in the function definition due to the listeners throwing one when it is triggered...
function onOrderClick(evt:MouseEvent):void -
I am using action script 3. I have html codes from ccbill that I am trying to make work with flash. Here is the script I am trying to use:
import flash.net.URLRequest;
var url:String = 'http://www.lexiefyfe.com/ccbill9001/index.htm';
myButton.addEventListener(MouseEvent.CLICK, onOrderClick);
function onOrderClick():void
var request:URLRequest = new URLRequest(url);
try {
navigateToURL(request, '_blank');
} catch (e:Error) {
trace('An error occurred');
Here is the code from ccbill:
<A HREF="http://www.lexiefyfe.com/ccbill9001/index.htm"><img src="ccbutton.jpg"></A>
This is the error report I am getting:
Scene=photogallery, layer=buttons, frame=1, Line 1 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 3 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 5 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 7 A type identifier is expected after the ':'.
Scene=photogallery, layer=buttons, frame=1, Line 9 The class or interface 'flash.net.URLRequest' could not be loaded.
Scene=photogallery, layer=buttons, frame=1, Line 7 Statement must appear within on handler
If anyone can help me with this issue I would be most grateful.
Thank you for any consideration,
ThomasYou have a mixture of things going on... AS3 code in an AS2 setting. Those are all AS2 error messages, and they are indicating you have placed the code on the buttons. To use that code, it must be placed on the timeline, and your Flash Publish Settings need to have AS3 specified instead of AS2. AS3 does not allow code to be placed on objects like AS2 does.
-
Error: [songname] was not copied to iPod because the song can not be found
I know that from my searches, this topic has been touched on but I am unable to locate a solution. So my apologies in advanced if asked and answered.
When updating, iTunes tells me that some songs cannot be copied because they cannot be found. However, the songs are clearly in the iTunes folder. I also have a backup copy of my entire library and adding them back from that library does not work either.
Here is what I have discovered about these files: some are songs that were in an album by themself and then the rest of the album was added later. Some of the songs are in the format of .mp3 and some are in the format of .m4a. None of the affected songs are purchased from iTunes; none of my purchased music is problematic.
This problem seems to be growing. At first it was just one song, then it grew to 48 and then to 59. The songs play just fine in iTunes, but cannot be copied to the iPod. I checked the properties of the songs, and none of them are read-only. There should not be a problem with permissions on this computer as I am the administrator and gave myself full priveleges on installation.
Clearly there is something wrong with these songs that prevents their being copied. Does anyone have any idea what is going on?
At the risk of getting flamed, please don't respond just to gripe about Apple, etc. I am looking for solutions, not commiseration.
Thanks in advance!Replying to my own post since I don't see how to edit.
I have some more information that may help if someone can determine the significance.
I EXPORTED one of the playlists that contains 2 of the above described problem songs. I converted the text file to a table and then noted that in the last column (column 27) that there is a PATH to the song. All other songs do not have this in the path. The path does not refer to the current location of the file, either.
The first song that this happened to does not appear on any playlists so I did not discover this.
The rest of the songs got "lost" after I added some old playlists back to my Library that I had exported. In one particular playlist two of the songs had the wrong path in the Location column, and neither was found. However, the rest of the songs had a blank field in that column and were found just fine. So.... I think I may be onto something, for all those who have this problem. However, the only way to actually do this without a supercomputer would be to make a playlist of all the not-copy-able songs, export the playlist and carefully look for that path data.
I would love to hear if anyone has tried this for this problem. I don't want to keep replying to my own posts, but I honestly think I cracked this "bug". The problem appears to be that the data in the database gets errors in it during the moving/addition of a song from another place on the system, regardless of the settings in iTunes. In my case, I consolidated my library, allowed iTunes to organize my music and I am a fanatic about spelling and so forth for song titles and related information.
--CRN -
Hi,
I Build an Lync 2013 set up with FEpool, Director pool and Exchange server is integrated. I have windows 8 client machine, with Lync client installed. When I try to login to the lync client, I am getting error like"There was a problem verifying
certificate from the server".
When I installed ROOT CA cert manually on client machine I am able to login to the lync client. similarly if I add my client machine in my domain, I am able to login to the Lync client.
Now is there any other way to send the certificate automatically to the client machine (Which are NOT part of the DOMAIN) from the server, instead of manual installation process.
Please help me troubleshoot this problemAgree with S Guna, there is no easy way to push a certificate automatically to a client that you don't control other than building an installer package and asking them to run it. In this situation, if there are a lot of non-domain joined machines
a third party certificate is the way you need to go.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Error message was displaying when comes back from the final output display
Hi Experts,
I have developed one program and it works fine. But when i press F3 or BACK button from the final display one Error wa coming in a pop-up saying "Selection criterion "Posting Date" contains several selection lines".
I cant understand where the problem was. Can any one suggest where would be the problem. I am sending the code.
REPORT zfir0011_o2c_tax_gl_summary.
TYPE-POOLS slis.
TABLES: faglflexa.
Types Declaration.
TYPES: BEGIN OF x_faglflexa,
ryear TYPE gjahr,
bukrs TYPE bukrs,
belnr TYPE belnr_d, "Document Number
poper TYPE poper, "Posting Period
budat TYPE budat, "Posting Date
buzei TYPE buzei, "Document line item
racct TYPE racct, "G/L Account no.
END OF x_faglflexa,
ty_t_faglflexa TYPE STANDARD TABLE OF x_faglflexa.
TYPES: BEGIN OF x_bset,
belnr TYPE belnr_d,
buzei TYPE buzei,
mwskz TYPE mwskz, "Tax code
hkont TYPE hkont,
shkzg TYPE shkzg, "Debit/Credit Indicator
txjcd TYPE txjcd, "Tax Jurisdiction
h2ste TYPE h2ste, "Tax Amount
h2bas TYPE h2bas_bses, "Tax Amount
END OF x_bset,
ty_t_bset TYPE STANDARD TABLE OF x_bset.
TYPES: BEGIN OF x_skat,
spras TYPE spras,
ktopl TYPE ktopl,
saknr TYPE saknr,
text TYPE txt20_skat,
END OF x_skat,
ty_t_skat TYPE STANDARD TABLE OF x_skat.
TYPES: BEGIN OF x_custom,
geo_state TYPE char2,
geo_county TYPE char3,
country TYPE char2,
description TYPE char40,
END OF x_custom,
ty_t_custom TYPE STANDARD TABLE OF x_custom.
TYPES: BEGIN OF x_budat,
sign TYPE char_01,
option TYPE char2,
low TYPE budat,
high TYPE budat,
END OF x_budat,
ty_t_budat TYPE STANDARD TABLE OF x_budat.
TYPES: BEGIN OF x_txjcd,
geo_state TYPE char2,
geo_county TYPE char3,
END OF x_txjcd,
ty_t_txjcd TYPE STANDARD TABLE OF x_txjcd.
TYPES: BEGIN OF x_inter,
ryear TYPE gjahr,
bukrs TYPE bukrs,
txjcd TYPE txjcd, "Tax Jurisdiction
racct TYPE racct, "G/L Account no.
h2ste TYPE h2ste, "Tax Amount
poper TYPE poper, "Posting Period
belnr TYPE belnr_d, "Document Number
shkzg TYPE shkzg, "Debit/Credit Indicator
END OF x_inter,
ty_t_inter TYPE STANDARD TABLE OF x_inter.
TYPES: BEGIN OF x_final,
txjcd TYPE bset-txjcd, "Tax Jurisdiction
state TYPE char40, "State
curr_bal TYPE bset-h2ste, "Current Balance
per_chng TYPE bset-h2ste, "Period Change
pri_bala TYPE bset-h2ste, "Prior Balance
END OF x_final,
ty_t_final TYPE STANDARD TABLE OF x_final.
Column positions to pass to field catalog
CONSTANTS : c_pos_1 TYPE sy-cucol VALUE '1', " position of the columns
c_pos_2 TYPE sy-cucol VALUE '2',
c_pos_3 TYPE sy-cucol VALUE '3',
c_pos_4 TYPE sy-cucol VALUE '4',
c_pos_5 TYPE sy-cucol VALUE '5'.
*Field names for Field Catalog
CONSTANTS : c_h TYPE c VALUE 'H', "Header
c_s TYPE c VALUE 'S', "Sub heading
c_slash TYPE c VALUE '/', "Slash
c_colon TYPE c VALUE ':', "Column
c_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',"#EC NEEDED "Top-of-page
c_top_of_page_split TYPE slis_formname VALUE 'TOP_OF_PAGE_SPLIT', "Top-of-page centered
c_txjcd TYPE slis_fieldname VALUE 'TXJCD', "Tax Jurisdiction
c_region TYPE slis_fieldname VALUE 'STATE', "State
c_currb TYPE slis_fieldname VALUE 'CURR_BAL', "Current Balance
c_perch TYPE slis_fieldname VALUE 'PER_CHNG', "Period Change
c_prbal TYPE slis_fieldname VALUE 'PRI_BALA'. "Prior Balance
CONSTANTS : c_table_name TYPE slis_tabname VALUE 'IT_FINAL', "For Field Catalog
c_spras TYPE spras VALUE 'E', "Language
c_buzei TYPE c VALUE '1', "Line item in BSET
c_one(2) TYPE c VALUE '01',
c_zp TYPE bset-mwskz VALUE 'ZP', "Sales Tax Code
c_zr TYPE bset-mwskz VALUE 'ZR'. "Sales Tax Code
Variables Declaration.
DATA : v_current_year TYPE i, "Current year
v_poper TYPE poper, "Posting period
v_saknr TYPE saknr, "Account no. "#EC NEEDED
v_ktopl TYPE ktopl, "Chart of Accounts
v_konts TYPE saknr, "G/L Account Number
v_bukrs TYPE bukrs, "Company Code
v_sum_val TYPE h2ste, "#EC NEEDED "Tax Amount
v_sum_val1 TYPE h2ste, "Tax Amount
v_sum_val2 TYPE h2ste, "Tax Amount
v_sum_debit TYPE h2ste,
v_sum_credit TYPE h2ste,
v_sum_debit1 TYPE h2ste,
v_sum_credit1 TYPE h2ste,
v_h2ste TYPE string, "#EC NEEDED
v_desc TYPE char40, "G/L Acct. Description
v_title TYPE char40. "Title
Internal Tables Declaration.
DATA : it_faglflexa TYPE ty_t_faglflexa, "Internal table for G/L Line Items.
it_bset TYPE ty_t_bset, "Internal table for Tax Data Document Segment.
it_skat TYPE ty_t_skat, "Internal table for Chart of Accounts: Desc.
it_custom TYPE ty_t_custom, "Custom table for storing STATE Description.
it_txjcd TYPE ty_t_txjcd, "For storing Tax Jurisdiction codes.
it_inter TYPE ty_t_inter. "Intermediate table for storing data & Performing Calculations.
DATA : it_final TYPE ty_t_final. "#EC NEEDED
*Fieldcatalogue Internal Table Declaration
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv,
it_alv_top_of_page TYPE slis_t_listheader,
wa_line TYPE slis_listheader.
*Field-symbols and Work Area Declarations
FIELD-SYMBOLS : <fs_faglflexa> TYPE x_faglflexa,
<fs_bset> TYPE x_bset.
DATA : wa_faglflexa TYPE x_faglflexa, "#EC NEEDED
wa_bset TYPE x_bset,
wa_skat TYPE x_skat,
wa_custom TYPE x_custom,
wa_txjcd TYPE x_txjcd,
wa_inter TYPE x_inter,
wa_final TYPE x_final. " #EC NEEDED
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs TYPE faglflexa-rbukrs OBLIGATORY, " Company Code
p_gjahr TYPE faglflexa-gjahr OBLIGATORY. " Fiscal Year
SELECT-OPTIONS: s_budat FOR faglflexa-budat OBLIGATORY " Posting Date
NO-EXTENSION
NO INTERVALS.
PARAMETERS: p_racct TYPE faglflexa-racct OBLIGATORY. " G/L Accounts
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN VALIDATIONS.
*Company Code Validation.
AT SELECTION-SCREEN ON p_bukrs.
SELECT SINGLE bukrs INTO v_bukrs
FROM t001
WHERE bukrs = p_bukrs.
IF sy-subrc NE 0.
MESSAGE e071(zfinprjt).
ENDIF.
Fiscal Year Validation. It should not be more than Current.
AT SELECTION-SCREEN ON p_gjahr.
v_current_year = sy-datum+0(4).
IF p_gjahr > v_current_year.
MESSAGE e072(zfinprjt).
ENDIF.
*G/L Account Validation.
AT SELECTION-SCREEN ON p_racct.
SELECT SINGLE saknr INTO v_saknr
FROM skb1
WHERE saknr EQ p_racct
AND bukrs EQ p_bukrs.
IF sy-subrc EQ 0.
*Check the Chart of Accounts for that Company Code.
SELECT SINGLE ktopl FROM t001
INTO v_ktopl
WHERE bukrs = p_bukrs.
*Check that it is a Tax G/L Account for that Company Code and G/L Account.
SELECT SINGLE konts FROM t030k "#EC *
INTO v_konts
WHERE ktopl = v_ktopl
AND konts = v_saknr.
IF sy-subrc NE 0.
MESSAGE e073(zfinprjt).
ENDIF.
ELSE.
MESSAGE e073(zfinprjt).
ENDIF.
AT SELECTION-SCREEN ON s_budat.
DATA : v_year(4) TYPE c,
v_month(2) TYPE c,
v_date(2) TYPE c. "#EC NEEDED
*if date ne 01 converting date to '01'
READ TABLE s_budat.
IF s_budat-low+6(2) NE c_one.
v_year = s_budat-low.
v_month = s_budat-low+4(2).
v_date = s_budat-low+6(2).
s_budat-high = s_budat-low.
CLEAR s_budat-low.
CONCATENATE v_year c_one c_one INTO s_budat-low.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
APPEND s_budat.
ENDIF.
START-OF-SELECTION.
PERFORM get_data USING p_bukrs "#EC *
p_gjahr "#EC *
s_budat[] "#EC *
p_racct CHANGING it_final. "#EC *
*Display report in ALV grid
IF it_final IS NOT INITIAL.
*Build Top of the page table.
PERFORM comment_build USING it_skat CHANGING it_alv_top_of_page.
*Build Field catalog table for ALV
PERFORM build_field_catalog CHANGING it_fieldcat.
*Display report
PERFORM display_alv USING it_final.
ELSE.
*No data found for the selection criteria/period.
MESSAGE i022(zfinprjt).
exit.
ENDIF.
*& Form GET_DATA
Retrieve data from Database tables
-->P_P_BUKRS text
-->P_P_GJAHR text
-->P_P_BUDAT text
-->P_P_RACCT text
<--P_IT_FINAL text
FORM get_data USING fp_bukrs TYPE bukrs "#EC *
fp_gjahr TYPE gjahr "#EC *
fp_budat TYPE ty_t_budat "#EC *
fp_racct TYPE racct "#EC *
CHANGING fp_it_final TYPE ty_t_final.
*selecting the Required data from FAGLFLEXA
SELECT ryear "Fiscal Year
rbukrs "Company Code
belnr "Document Number
poper "Posting Period
budat "Posting Date
buzei "Document line item
racct "G/L Account no.
INTO TABLE it_faglflexa
FROM faglflexa
WHERE rbukrs EQ p_bukrs "#EC *
AND gjahr EQ p_gjahr "#EC *
AND budat LE s_budat "#EC *
AND budat IN s_budat "#EC *
AND racct EQ p_racct. "#EC *
IF sy-subrc EQ 0.
SORT it_faglflexa.
ENDIF.
*selecting the Tax Jurisdiction, Tax amount from BSET
IF it_faglflexa IS NOT INITIAL.
SELECT belnr
buzei
mwskz
"hkont
shkzg "Debit/Credit Indicator
txjcd "Tax Jurisdicaiton
h2ste "Tax Amount
h2bas "Tax Amount1
INTO TABLE it_bset
FROM bset
FOR ALL ENTRIES IN it_faglflexa
WHERE belnr EQ it_faglflexa-belnr
AND gjahr EQ p_gjahr "it_faglflexa-ryear
AND buzei EQ c_buzei. "Line item
ENDIF.
IF sy-subrc EQ 0.
SORT it_bset BY txjcd ASCENDING.
SORT it_bset BY belnr ASCENDING.
ENDIF.
*Selecting the G/L Account Long Text from SKAT
IF it_faglflexa IS NOT INITIAL.
SELECT spras " Language key
ktopl " Chart of Accounts
saknr " G/L Account Number
txt20 " G/L Account Long Text
INTO TABLE it_skat
FROM skat
FOR ALL ENTRIES IN it_faglflexa
WHERE spras = c_spras
AND saknr = it_faglflexa-racct.
ENDIF.
IF sy-subrc EQ 0.
SORT it_skat.
ENDIF.
LOOP AT it_bset ASSIGNING <fs_bset>.
wa_txjcd-geo_state = <fs_bset>-txjcd+0(2).
wa_txjcd-geo_county = <fs_bset>-txjcd+2(3).
APPEND wa_txjcd TO it_txjcd.
CLEAR wa_txjcd.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_txjcd BY geo_state.
DELETE ADJACENT DUPLICATES FROM it_txjcd COMPARING geo_state geo_county.
ENDIF.
*Selecting the Description from Custom table
IF it_txjcd IS NOT INITIAL.
SELECT geo_state
geo_county
country
description
INTO TABLE it_custom
FROM ztfi_tgl_summary
FOR ALL ENTRIES IN it_txjcd
WHERE geo_state = it_txjcd-geo_state
AND geo_county = it_txjcd-geo_county.
ENDIF.
IF sy-subrc EQ 0.
SORT it_custom.
ENDIF.
LOOP AT it_faglflexa ASSIGNING <fs_faglflexa>.
MOVE-CORRESPONDING <fs_faglflexa> TO wa_inter. "#EC ENHOK
*Read Tax Jurisdiction and Tax Amount from BSET Table.
READ TABLE it_bset INTO wa_bset WITH KEY belnr = <fs_faglflexa>-belnr
BINARY SEARCH.
IF sy-subrc EQ 0.
wa_inter-shkzg = wa_bset-shkzg.
wa_inter-txjcd = wa_bset-txjcd.
ENDIF.
*If BSET-MWSKZ = ZP or ZR then pick H2BAS as Tax Amount.
IF wa_bset-mwskz = c_zp.
wa_inter-h2ste = wa_bset-h2bas.
ELSEIF wa_bset-mwskz = c_zr.
wa_inter-h2ste = wa_bset-h2bas.
ELSE.
wa_inter-h2ste = wa_bset-h2ste.
ENDIF.
*Check it is credit entry or debit entry ('H' or 'S').
IF wa_inter-shkzg EQ 'H'.
wa_inter-h2ste = wa_inter-h2ste * -1.
ENDIF.
APPEND wa_inter TO it_inter.
CLEAR: wa_inter, wa_bset.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_inter BY bukrs ryear txjcd ASCENDING.
DELETE it_inter WHERE txjcd EQ space.
DELETE ADJACENT DUPLICATES FROM it_inter COMPARING belnr.
ENDIF.
v_poper = s_budat-high+4(2).
LOOP AT it_inter INTO wa_inter.
*Read the Text maintained in the custom table based on the GEO_STATE = First two digits of TXJCD
*and GEO_COUNTY = Next three digits of TXJCD. If this is blank pick based on First two digits of TXJCD.
READ TABLE it_custom INTO wa_custom WITH KEY geo_state = wa_inter-txjcd+0(2)
geo_county = wa_inter-txjcd+2(3)
BINARY SEARCH.
IF sy-subrc NE 0.
READ TABLE it_custom INTO wa_custom WITH KEY geo_state = wa_bset-txjcd+0(2)
BINARY SEARCH.
ENDIF.
IF sy-subrc = 0.
wa_final-state = wa_custom-description.
ENDIF.
AT NEW txjcd.
CLEAR: v_sum_val, v_sum_val1, v_sum_val2.
ENDAT.
Period Change, if v_poper equal to present period(v_poper).
IF wa_inter-poper EQ v_poper.
IF wa_inter-shkzg EQ 'H'.
v_sum_debit = v_sum_debit + wa_inter-h2ste.
ELSE.
v_sum_credit = v_sum_credit + wa_inter-h2ste.
ENDIF.
Prior Balance, if v_poper is less than present period(v_poper).
ELSEIF wa_inter-poper LT v_poper.
IF wa_inter-shkzg EQ 'H'.
v_sum_debit1 = v_sum_debit1 + wa_inter-h2ste.
ELSE.
v_sum_credit1 = v_sum_credit1 + wa_inter-h2ste.
ENDIF.
ENDIF.
AT END OF txjcd.
wa_final-txjcd = wa_inter-txjcd.
IF sy-subrc EQ 0.
v_sum_val1 = v_sum_credit - v_sum_debit. "Temp Commented
ENDIF.
wa_final-per_chng = v_sum_val1. "Period change
IF sy-subrc EQ 0.
v_sum_val2 = v_sum_credit1 - v_sum_debit1. "Temp commented
ENDIF.
wa_final-pri_bala = v_sum_val2. "Prior Balance
wa_final-curr_bal = v_sum_val1 + v_sum_val2. "Current Balance
APPEND wa_final TO it_final. "#EC *
CLEAR: wa_inter,
wa_final,
v_sum_credit,
v_sum_credit1,
v_sum_debit,
v_sum_debit1.
ENDAT.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form COMMENT_BUILD
ALV Top of Page
-->P_IT_SKAT text
<--P_IT_ALV_TOP_OF_PAGE text
FORM comment_build USING fp_it_skat TYPE ty_t_skat"#EC NEEDED
CHANGING fp_it_alv_top_of_page TYPE slis_t_listheader.
DATA: v_budat_low TYPE c LENGTH 10, "#EC NEEDED
v_budat_high TYPE c LENGTH 10, "#EC NEEDED
v_butxt TYPE butxt.
CLEAR wa_line.
*Report Title
CONCATENATE text-005 p_bukrs INTO v_title SEPARATED BY space.
wa_line-typ = c_h.
wa_line-key = ' '.
wa_line-info = v_title.
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
*Account Number
wa_line-typ = c_s.
wa_line-key = text-006.
wa_line-info = p_racct.
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
*G/L Account Description
READ TABLE it_skat INTO wa_skat WITH KEY ktopl = v_ktopl BINARY SEARCH."#EC *
IF sy-subrc EQ 0.
v_desc = wa_skat-text.
ENDIF.
wa_line-typ = c_s.
wa_line-key = text-007.
wa_line-info = v_desc.
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
*Fiscal Year from selection
IF NOT p_gjahr IS INITIAL.
wa_line-info = p_gjahr.
wa_line-typ = c_s.
wa_line-key = text-008. "Fiscal Year
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
ENDIF.
*Posting Date
CONCATENATE s_budat-high4(2) s_budat-high6(2) s_budat-high+0(4) INTO wa_line-info SEPARATED BY c_slash.
wa_line-typ = c_s.
wa_line-key = text-009. "Posting Date
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
*Company Code Description from selection
IF NOT p_bukrs IS INITIAL.
SELECT SINGLE butxt FROM t001
INTO v_butxt WHERE bukrs EQ p_bukrs.
IF sy-subrc EQ 0.
wa_line-info = v_butxt.
wa_line-typ = c_s.
wa_line-key = text-010. "Company Code Description
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR wa_line.
ENDIF.
ENDIF.
Printed Date
wa_line-typ = c_s.
wa_line-key = text-011. "Printed Date
CONCATENATE sy-datum+4(2)
sy-datum+6(2)
sy-datum(4) INTO wa_line-info SEPARATED BY c_slash. "todays date
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR: wa_line.
Printing Time
wa_line-typ = c_s.
wa_line-key = text-012. "Printing Time
wa_line-info = sy-uzeit.
CONCATENATE sy-uzeit(2)
sy-uzeit+2(2)
sy-uzeit+4(2) INTO wa_line-info SEPARATED BY c_colon. "current time
APPEND wa_line TO fp_it_alv_top_of_page.
CLEAR: wa_line.
ENDFORM. " COMMENT_BUILD
*& Form BUILD_FIELD_CATALOG
Fieldcatalogue
<--P_IT_FIELDCAT text
FORM build_field_catalog CHANGING fp_it_fieldcat TYPE slis_t_fieldcat_alv.
TAX JURISDICTION
wa_fieldcat-col_pos = c_pos_1.
wa_fieldcat-reptext_ddic = text-013. "TAX JURISDICTION
wa_fieldcat-fieldname = c_txjcd.
wa_fieldcat-tabname = c_table_name.
wa_fieldcat-outputlen = '15'.
APPEND wa_fieldcat TO fp_it_fieldcat.
CLEAR : wa_fieldcat.
STATE
wa_fieldcat-col_pos = c_pos_2.
wa_fieldcat-reptext_ddic = text-014. "STATE
wa_fieldcat-fieldname = c_region.
wa_fieldcat-tabname = c_table_name.
wa_fieldcat-outputlen = '40'.
APPEND wa_fieldcat TO fp_it_fieldcat.
CLEAR : wa_fieldcat.
CURRENT BALANCE
wa_fieldcat-col_pos = c_pos_3.
wa_fieldcat-reptext_ddic = text-015. "CURRENT BALANCE
wa_fieldcat-fieldname = c_currb.
wa_fieldcat-tabname = c_table_name.
wa_fieldcat-do_sum = 'X'.
wa_fieldcat-datatype = 'CURR'.
wa_fieldcat-outputlen = '17'.
APPEND wa_fieldcat TO fp_it_fieldcat.
CLEAR : wa_fieldcat.
PERIOD CHANGE
wa_fieldcat-col_pos = c_pos_4.
wa_fieldcat-reptext_ddic = text-016. "PERIOD CHANGE
wa_fieldcat-fieldname = c_perch.
wa_fieldcat-tabname = c_table_name.
wa_fieldcat-do_sum = 'X'.
wa_fieldcat-datatype = 'CURR'.
wa_fieldcat-outputlen = '17'.
APPEND wa_fieldcat TO fp_it_fieldcat.
CLEAR : wa_fieldcat.
PRIOR BALANCE
wa_fieldcat-col_pos = c_pos_5.
wa_fieldcat-reptext_ddic = text-017. "PRIOR BALANCE
wa_fieldcat-fieldname = c_prbal.
wa_fieldcat-tabname = c_table_name.
wa_fieldcat-do_sum = 'X'.
wa_fieldcat-datatype = 'CURR'.
wa_fieldcat-outputlen = '17'.
APPEND wa_fieldcat TO fp_it_fieldcat.
CLEAR : wa_fieldcat.
ENDFORM. " BUILD_FIELD_CATALOG
*& Form DISPLAY_ALV
ALV Grid Display
-->P_IT_FINAL text
FORM display_alv USING fp_it_final TYPE ty_t_final.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_callback_top_of_page = c_top_of_page
i_callback_html_top_of_page = c_top_of_page_split
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
i_save = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = fp_it_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc EQ 0. "#EC *
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV
*& Form top_of_page_split
Top of page for displaying the Text in Center
FORM top_of_page_split USING fp_top TYPE REF TO cl_dd_document."#EC *
TYPES: BEGIN OF ty_text,
text TYPE sdydo_text_element,
END OF ty_text.
TYPES: BEGIN OF ty_text1, "AAAAAAAA
text1 TYPE sdydo_text_element,
END OF ty_text1.
DATA: v_tab TYPE sdydo_text_table,
v_area TYPE REF TO cl_dd_area,
v_text TYPE sdydo_text_element,
v_text1 TYPE sdydo_text_element, "#EC NEEDED
v_tab1 TYPE sdydo_text_table.
DATA: it_text TYPE TABLE OF ty_text,
wa_text TYPE ty_text,
it_text1 TYPE TABLE OF ty_text1,
wa_text1 TYPE ty_text1.
DATA: v_title TYPE string,
v_accts_desc TYPE string,
v_year TYPE string,
v_comp_code TYPE string,
v_desc TYPE char40,
v_budat TYPE char10,
v_budat1 TYPE char10,
v_butxt TYPE butxt,
v_time TYPE char10,
v_comma TYPE c VALUE ','.
CALL METHOD fp_top->initialize_document.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->vertical_split
EXPORTING
split_area = fp_top
split_width = '31%'
IMPORTING
right_area = v_area.
IF sy-subrc EQ 0. "#EC NEEDED
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*G/L Account Description
READ TABLE it_skat INTO wa_skat WITH KEY ktopl = v_ktopl BINARY SEARCH.
IF sy-subrc EQ 0.
v_desc = wa_skat-text.
ENDIF.
*Company code Description
IF NOT p_bukrs IS INITIAL.
SELECT SINGLE butxt FROM t001
INTO v_butxt WHERE bukrs EQ p_bukrs.
ENDIF.
CONCATENATE text-005 p_bukrs INTO v_title SEPARATED BY space.
wa_text1-text1 = v_title.
APPEND wa_text1 TO it_text1.
v_tab1 = it_text1.
CALL METHOD v_area->add_text
EXPORTING
text_table = v_tab1
fix_lines = 'X'
sap_fontsize = cl_dd_document=>large
sap_emphasis = cl_dd_document=>strong. "AAAAAA
CHECK sy-subrc EQ 0.
CONCATENATE text-006 p_racct v_comma text-007 v_desc INTO v_accts_desc SEPARATED BY space.
CONCATENATE s_budat-high4(2) s_budat-high6(2) s_budat-high+0(4) INTO v_budat SEPARATED BY c_slash.
CONCATENATE text-008 p_gjahr v_comma text-009 v_budat INTO v_year SEPARATED BY space.
CONCATENATE text-010 v_butxt INTO v_comp_code SEPARATED BY space.
wa_text-text = v_title.
APPEND wa_text TO it_text.
wa_text-text = v_accts_desc.
APPEND wa_text TO it_text.
wa_text-text = v_year.
APPEND wa_text TO it_text.
wa_text-text = v_comp_code.
APPEND wa_text TO it_text.
v_tab = it_text.
CALL METHOD v_area->add_text
EXPORTING
text_table = v_tab
fix_lines = 'X'
sap_fontsize = cl_dd_document=>medium
sap_emphasis = cl_dd_document=>medium.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->new_line.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->new_line.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->new_line.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->add_gap
EXPORTING
width = 0.
CHECK sy-subrc EQ 0.
CONCATENATE sy-datum4(2) sy-datum6(2) sy-datum+0(4) INTO v_budat1 SEPARATED BY c_slash.
CALL METHOD fp_top->add_text
EXPORTING
text = text-011
sap_emphasis = 'STRONG'.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->add_gap
EXPORTING
width = 1.
CHECK sy-subrc EQ 0.
v_text = v_budat1.
CALL METHOD fp_top->add_text
EXPORTING
text = v_text.
sap_style = 'KEY'.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->new_line.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->add_text
EXPORTING
text = text-012
sap_emphasis = 'STRONG'.
CHECK sy-subrc EQ 0.
CALL METHOD fp_top->add_gap
EXPORTING
width = 1.
CHECK sy-subrc EQ 0.
CONCATENATE sy-uzeit(2)
sy-uzeit+2(2)
sy-uzeit+4(2) INTO v_time SEPARATED BY c_colon. "current time
v_text = v_time.
CALL METHOD fp_top->add_text
EXPORTING
text = v_text.
sap_style = 'KEY'.
CHECK sy-subrc EQ 0.
ENDFORM. "top_of_page_split
Thanks in Advance.
Regards,
RamanaProblem is with ur selection screen definition for s_budat
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs TYPE faglflexa-rbukrs OBLIGATORY, " Company Code
p_gjahr TYPE faglflexa-gjahr OBLIGATORY. " Fiscal Year
SELECT-OPTIONS: s_budat FOR faglflexa-budat OBLIGATORY " Posting Date
NO-EXTENSION
NO INTERVALS.
PARAMETERS: p_racct TYPE faglflexa-racct OBLIGATORY. " G/L Accounts
SELECTION-SCREEN END OF BLOCK b1.
Here u r defining s_budat like parameter with NO-EXTENSION
NO INTERVALS. additions.
So that means it should contain only one record in it. As s_budat is nothing but a range table with headerline so this entry should be contained in the body as well as in the header.
But in AT SELECTION-SCREEN ON s_budat. u r again entering a 2nd record if date is not 01.
AT SELECTION-SCREEN ON s_budat.
DATA : v_year(4) TYPE c,
v_month(2) TYPE c,
v_date(2) TYPE c. "#EC NEEDED
*if date ne 01 converting date to '01'
READ TABLE s_budat.
IF s_budat-low+6(2) NE c_one. << Here u r checking the header not the body
v_year = s_budat-low.
v_month = s_budat-low+4(2).
v_date = s_budat-low+6(2).
s_budat-high = s_budat-low.
CLEAR s_budat-low.
CONCATENATE v_year c_one c_one INTO s_budat-low.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
APPEND s_budat.
ENDIF.
Due to these 2 records it is giving u error. So to avoid the problem u should read the body of the table and then modify the record.
Read table s_budat index 1.
IF s_budat-low+6(2) NE c_one.* << Here u r checking the header not the body
v_year = s_budat-low.
v_month = s_budat-low+4(2).
v_date = s_budat-low+6(2).
s_budat-high = s_budat-low.
CLEAR s_budat-low.
CONCATENATE v_year c_one c_one INTO s_budat-low.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
modify s_budat index sy-tabix.
Regards,
Joy. -
Error reported every time I try to empty the trash can
Does anyone know what to do to deal with the following error message.
"Sorry, the operation could not be completed because and unexpected error occurred (Error code -8062)
<stop> <continue>
My only way around this are to use the terminal program (each time), or a 3rd party utility like FileExaminer which will force the trash to empty. A major waste of time in every case.
Hope someone knows how to deal with this.
PaulDoes anyone know what to do to deal with the following error message.
"Sorry, the operation could not be completed because and unexpected error occurred (Error code -8062)
<stop> <continue>
My only way around this are to use the terminal program (each time), or a 3rd party utility like FileExaminer which will force the trash to empty. A major waste of time in every case.
Hope someone knows how to deal with this.
Paul -
Error report generated but can't send to apple. Suggestions?
Safari was acting funny, kind of lagging. Then it crashed. Tried to submit the error report to apple but it would not work. Suggestions about the problem?
Can't find the error report now, as I have already closed the window. Tell me how to find it and I'll post it if it helps. Thanks.Go to ~/Library/Preferences. Move the com.apple.CrashReporter.plist file from the Preferences folder to the Trash. You should be able to send a report to Apple now. Keep in mind, you will not receive a response from Apple. The reports are channeled to Apple developers.
Crash reports can be found in the ~/Library/Logs/CrashReporter folder.
If you want help with Safari, copy/paste the entire contents of the Crash Reporter window into your reply here. Hopefully we can help you. -
Need help with an error report
Attached is an error report from a VI that normally crashes with Error Checking set to Default in the VI's LCFN configuration dialog box. Can't debug it when it crashes; LabWindows CVI comes up for debug but CVI crashes too.
The attached error report was only available after setting Error Checking to 'No Error Checking'.
Any ideas what's going on with this DLL function called by the LCFN?
Platform: Windows 7-32 + LV2013 Pro SP1-32.
Jeff
Jeffrey Bledsoe
Electrical Engineer
Solved!
Go to Solution.
Attachments:
1607b431-02ef-4672-a138-c2ebc4a16c2b.zip 20 KBConnor,
Sorry, I meant CLFN.
This isn't an executable.
It's good LV2009 code (ran okay with LV2009) that I'm trying to execute with LV2013. I ran a mass compile on all the VIs.
I posted this issue a few months ago when using an evaluation copy of LV2013 but have only recently begun looking at it again after I installed our purchased copy of LV2013.
I can prevent LV crashes from this VI by changing its calling convention from "C" to "StdCall." However, the value returned from the DLL function is invalid. While the DLL function returns an invalild value, I added "unbundle by name" VIs to the error stream on the input and the output of the CLFN. Results: the error 'code' at the input and the output of the CLFN = 0.
The supplier of the DLL said the DLL functions are written in either C or C++. I've found notes at ni.com that indicate a "Wrapper DLL" (written in C) might be required to provide a "C to C++" translation interface between the CLFN and the DLL functions.
Another approach I've found on ni.com appears to be replacing the CLFN with a Code Interface Node (CIN) having C code to interface LV with the C++ code of the DLL function, thus eliminating the CLFN.
There are also some notes on ni.com concerning CLFN settings causing crashes in the LV2009 to LV2010 transition; apparently, other changes between LV2010 and LV2013 are causing my issue.
The supplier of the free DLL now has a LV developers kit (for purchase) that might solve these issues but we can't go that route.
Thanks,
Jeff
Jeffrey Bledsoe
Electrical Engineer -
I click on itunes but doesnt open and says send error report or dont send
i click on itunes but doesnt open and says send error report or dont send
You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?
-
Did PC Recovery and Dowloaded iTunes, wont open, only get error reports.
I just did a PC recovery and have all of my music from iTunes backed up on a dock drive. I just re-downloaded iTunes and installed it. iTunes won't open, I just get an error report every time. I clicked on the setup file and tried to repair it. I've uninstalled it and redownloaded it. Still the same result. Does anyone have any ideas on what else I could do?
does that help anyone?
dv8000 Windows XP -
Itunes program not responding and wants me to send error report
I have read many posts and answers to this problem and have tried about everything that I have read. When I try to open the itunes 7 program on my desktop, it says the program cannot respond and must shut down. It also asks if I wish to send an error report. I have installed and uninstalled the itunes 7 program several times. I have disabled my spyware applications and my norton antivirus programs and then tried to re-install and I get the same thing. I have also tried to install Quicktime 7 stand alone program and when I try to install and run this program another message comes up that states that it cannot install this Quicktime program because another more recent QT program is already installed on my computer. I am really starting to go crazy here. Can anyone help?
replying to slubadubseano
When I try to open the itunes 7 program on my
desktop, it says the program cannot respond and must
shut down. It also asks if I wish to send an error
report. I have installed and uninstalled the itunes 7
program several times. I have disabled my spyware
applications and my norton antivirus programs and
then tried to re-install and I get the same thing. I
have also tried to install Quicktime 7 stand alone
program and when I try to install and run this
program another message comes up that states that it
cannot install this Quicktime program because another
more recent QT program is already installed on my
computer.
okay, let's try this first.
head into your Add/Remove programs. uninstall
QuickTime.
Next, we’ll manually remove leftover program files
and folders.
1. On the Start menu, click My Computer (or
double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click
Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and
QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your
PC by doing a repair install of
itunes.
switch off antivirus and antispyware applications
prior to the repair install.
go into Add/Remove and select itunes. click "Change"
and then click "Repair".
if the repair install goes through okay, restart the
PC and try launching itunes again. does it launch
properly now?
i tried all above as i am having the same problem, but i still get the message "itunes has encountered a problem and must close" and quicktime still does nothing when i try to open it... -
Itunes will not start and keep getting send error report to MS message
I had a system crash and have re-built the sytem with XP Professional SP2 with all upto date patches. Symantec Norton Internet Security 2007.
Downloaded the latest Itunes and Quicktime update on Monday evening and now every time I click on the Itunes icon, i get unable to start application and do you want to send an error report to Microsoft.
I remember all the problems with the 6 to 7 upgrade and am hoping this is not a repeat.
Any help appreciated.The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX.........Have tried all 'fixes' suggested but iTunes STILL not opening
1. Uninstall iTunes and Quicktime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install Quicktime FIRST. -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
Maybe you are looking for
-
How can I create a new Numbers Document through AppleScript?
How can I create a new Numbers Document through AppleScript? I try this: tell application "Numbers" make new document with properties {template name:"blank"} end tell But don't work. Where can I find documentation about it? Thanks
-
Double-click to create method/attribute in EHP2 Netweaver 7.0 does not work
Hi, this makes me wonder: I'm used to create new attributes or methods by simply double-clicking the new name and the system will ask me to create. Now I am new in EHP2 and for methods it just says 'wrong cursor position or object not in navigation',
-
Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?
-
Some free tapes are not used by backup job - dpm 2012 r2
Hi, I have DPM 2012 R2 with IBM TotalStorage 3572 tape library. It is 8 slot tape library. All was working with initial 8 tapes I added to tape library. I had one Protection group to be archived on 8 tapes. I was doing Daily and weekly backups. Every
-
How to read out License Keys of Windows Software on Macs?
Hi everyone, good day to you all, i doubt that this question really fits into this Topic perfectly but i didn't know where else to post it. I hope that you can help me out with this, i have a problem that i have a number of Macs ranging from Minis to