Inserts for autoload song or template

How can I make an autoload song or template with more then two insert slots without assigning plug-ins? This in order to make sure I can always make inserts preceeding the active ones. Suppose my first insert is a delay which I place on the fourth slot. This will give me the opportunity to insert a eq, compressor and gate later on resp. the first, second and third slot.

Assign some plug-ins so that you end up with something in the 4th slot (simple things like the Logic/Helper/Gainer plug-in which takes up very little CPU power). Then remove all but the 4th plug-in and re-save your Autoload song. All of your audio tracks will now have 5 plug-in slots (it's not possible to remove the slot that's created below the 4th plug-in) but at least you'll have an Autoload song that immediately comes up with 4 slots to work with.
HTH

Similar Messages

Import a garageband for iOS song always shows a 0% below projects.

It is just after I uploaded songs from my iOS garageband (newest version and iOS), I can see my projects on the "import a garageband for iOS song" window (also the latest version), but there were 0%s under the projects. I clicked the project icons but nothing happened.

Thank you for the reply.
Will put this on Apple's todo wishlist for iMovie for Mac OSX.
MEANTIME: My main workaround is to:
1. Crank out an iMovie for iOS trailer video in HD 720 or HD 1080.
2. Copy the video file to the iMovie for Mac OS X machine.
3. Import the video file under a new Event under iMovie for Mac OS X.
4. Add a new Project to use to breakdown the video file into title sequences and "video well" shots.
5. Carefully Detach Audio from each "video well" shot.
6. Save and finalize the new Project for use as a "Trailer Template" Project.
7. Duplicate the "Trailer Template" Project for each New Trailer in that style.
8. And then insert new Event video sequences into video well shots.

How to insert a HYPERLINK in a template Editable Field?

Question: How to insert a HYPERLINK in a template Editable Field?
Hi
Does anyone know how to insert a HYPERLINK in a template Editable Field?
I want the link to always display the word "Cities".
But the URL will change with each child page.
Here's what I've got so far . . .
Cities
Thanks so much!

NOTE: This is to go into the TEMPLATE
Your best bet is to keep the hyperlink OUT of the editable Field and to make the HREF attribute of the link editable.
This would go in the head of your document:

This would go where you want the link to appear:
<a href="@@(href)@@">cities</a>
THE BETTER WAY: You can either paste these quotes into the appropriate places in your template or you can insert:
<a href="#">cities</a>
and click inside the opening <a> tag.
Then go to Modify > Templates > Make Attribute Editable
In the dialog box "Editable Tag Attributes" you should now see "Choose which attributes of this A tag should be editable."
If HREF is not showing in the drop-down, do Add and put it there.
Check the box to Make this attribute editable.
Give a name for this editable attribute (if you have more than one on a page, you will want it to be understandable, like "cities" for your cities links).
Make sure it is of Type URL
If you want a default URL in place, put one in the Default field.
Then push OK.
To use it, on each page, do Modify > Template Properties... choose the property to edit, and put the new URL in the entry field.
Press OK.
Beth

How can I load the mix of one song for another song?

I'm going to be mixing a live gospel album with 9 tracks of drums, bass, guitar, piano, strings, organ, lead vocals and 6 tracks of choir vocals. Each song will basically be mixed the same except for variations in the choir levels and lead vocals. I want to mix this in logic but I don't want to create a mix for each song from scratch. All the audio tracks will be consistiently on the same track, meaning Bass-trak 1, guitar-trak 10 etc... for each song. What would be the easiest way to do this without creating a mix from scratch for each song.
Thanks

Hi. I find myself in this situation a lot, and eventually settled on this method.
Mix the first track the way you want it, and getting your levels and plugins settled. Save the song as the title of that particular song. Then, select everything in the arrange window, and delete it. If you are asked to delete or keep audio files, click keep, cos you don't want to lose recorded audio. If you have set markers, delete those too. if you have any automation, select track automation>delete all automation of all tracks.
You are then set with a clean sheet with your tracks labelled, levels set and all the bells and whistles. Now do a SAVE AS and call it something like KICKASSGOSPELTEMPLATE or even save it as a logic template. Then, with this template open, open up another one of your songs, select everything in your arrange window, copy it to your clipboard, move to your template song, go bar number 1, and paste. You will be asked whether you want to copy instruments or tracks. I can't remember which one you select, but a quick trial and error should see you straight. All the audio tracks should come down onto the right audio objects and hitting play should have you almost to where you want to be.

Insert Date into Indesign CS3 template

I had a script that worked great in CS2 but when I upgraded to CS3 it doesn't work. I posted on here to find the problem with no help so I"m starting from scratch.
Its it possible to insert the date into a template with a script in CS3
Example: SUNDAY, August 24, 2008

Here the script is again... Don't know what to say? it works in CS2
//DESCRIPTION: Use to insert date/time into document.
if (app.documents.length == 0) { exit() }
insertDTs(app.documents[0]);
function insertDTs(aDoc) {
var curPrefs = aDoc.characterStyles[0].extractLabel("dtprefs");
if (curPrefs == "") {
// Doc has no prefs; use saved prefs
curPrefs = getCurPrefs(File(getScriptPath().absoluteURI.replace(/Insert\.jsx/, "Prefs.txt")));
} // end if curPrefs
var prefParts = curPrefs.split("\n");
if (prefParts[2] != "[None]") {
insertIt(aDoc, prefParts[0], prefParts[2]);
if (prefParts[3] != "[None]") {
insertIt(aDoc, prefParts[1], prefParts[3]);
function insertIt(aDoc, formString, cStyleName) {
var formStrings= ["Day, Month, Year"]
var theFuncs = [dayMonthYear]
var charStyleStrings = aDoc.characterStyles.everyItem().name
if (indexOf(charStyleStrings, cStyleName) < 1) { return } // style not found or is No Style
var func = indexOf(formStrings, formString);
if (func < 0) { return } // requested form not recognized
var dateString = theFuncs[func](new Date());
app.findPreferences = app.changePreferences = null;
aDoc.search("", true, true, dateString, {appliedCharacterStyle:cStyleName});
} // end insertIt
function dayMonthYear(date) {
date.setDate(date.getDate()+1);
// returns dayName, monthName date, year
var myDateString = date.toLocaleDateString();
myParts = myDateString.split(" 0");
if (myParts.length != 1) {
myDateString = myParts[0] + " " +myParts[1];
return myDateString.slice(0,-5) + "," + myDateString.slice(-5);
function indexOf(array, find,offs) {
for( var i = offs == undefined ? 0 : offs; array.length > i; i++ ) {
if( array[i]==find ) {return i}
return -1;
function getScriptPath() {
// This function returns the path to the active script, even when running ESTK
try {
return app.activeScript;
} catch(e) {
return File(e.fileName);
} // end try
} // end getScriptPath
} // end insertDTs

Still trying to insert my photo into Avery template

Thank you I was able to turn the background to white. However I am still trying to figure out how to insert my image into this template so I can then have photoshop manage the color and print it with my Epson 3800 printer. When I click on the template it says could not complete your request because more than one layer is selected. This what Avery sent in the download. Do I have to do this in layers? I just want to insert the phot and print my images on the postcard templates I bought from Avery. Anyone get what i am asking?
Thanks,
Andrea

Andrea,
It is very poor netiquette to start a duplicate thread for the same issue you're discussing elsewhere:
http://forums.adobe.com/message/5246034?tstart=0#5246034
It causes confusion and wastes time and efforts of other users.
No, your question is not clear because you have given us almost no information and have not provided pertinent screen shots. The terminology in the description of your problem is far from clear.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

INSERT for 1 PHONES could not be processed for BAT

Hi All,
I am trying to upload the file .csv to CUCM for configuring phones in a bulk but ending with a error as "INSERT for 1 PHONES could not be processed'.
Could some one guide me how will be the csv file format for inserting phones in CUCM without using the .xlt file
Thanks in advance!!
Regards,
Saif

Hi,
Traditionally I have used a phone template and phone format along with the CSV most new deployments have single model phones or minimal meeting room phones so easier to configure manually. But this should get you started.
Go to Bulk Admin -> Phone File Format -> Create File Format
Add a new file format based upon add the fields you want to populate, make sure the maximum number of lines is at least one, save it
Some Example Fields: DEVICE NAME,DESCRIPTION,DEVICE POOL,LOCATION,OWNER USER ID,DIRECTORY NUMBER 1,ASCII ALERTING NAME 1,ASCII DISPLAY 1,ASCII LINE TEXT LABEL 1,ALERTING NAME 1,DISPLAY 1,LINE TEXT LABEL 1
Go to Bulk Admin -> Phone File Format -> Add File Format
Drop Down Box Format File Name select the file format you just created, then click the hyper link View File Format to the right, there will then be a pop up which will have all the headings.
Copy and paste this into a notepad, save as CSV then open in excel add users as needed
Re-import CSV to UCM and add the file format to the CSV
Import the phones against the phone button template.
There are other items you would want to do now is owner ID, assign to user for CTI control, etc with other BAT utilities.
Hope this helps

Logic 7.2.2 and Yamaha 01X ... no headphones sound ? Autoload song ?

Hi,
Just finished the Logic 7 Training book ... great ... connected my Yamaha 01X with the mlan auto connector 1.0.4 (latest intel MacBook Pro) ... and yeah all faders jump around both ways ... displays perfect ... transport controls respond both ways ... but I can't get sound on my Yamaha headphone output or through the Yamaha monitor out ! My speakers on the laptop get disconnected (even get a no work sign when pushing F4) ... so what am I doing wrong ? I must be so close and spent a full day on this last bit ... In the Yamaha manual ... I read something about output cahnnel 17 and 18 ... but I am not really getting this.
Can anybody send me perhaps an autoload song for the Yamaha 01X ... Thanks a lot ... and greetings from Brugge - Belgium.

you're not looking for an autoload song for Logic.
You need to understand that the 01x gives you an extremely flexible routing of digital audio streams and if you want, MIDI and word clock info too.
your best support site and forum for mLAN related issues is over at www.01xray.com. There's a Mac/OSX user forum over there as well.
input channels mLAN 17 & 18, route directly to the monitor outs of your o1X, which drive the monitor outputs and the headphone jack on the mixer. You need to decide how you want to route audio out of the mac towards the o1x. take your stereo mix (probably outputs 1 and 2 coming out of the mac) and route them to input channels 17 and 18 on your o1x, and you should be good. on the o1x, you also need to look at whether you're monitoring the A or B "mix".
Don't know what over mLAN stuff (if any) you have, so how I route may be quite a bit different than what you need...
You're close, really close!
Michael
Hi,
Just finished the Logic 7 Training book ... great ...
connected my Yamaha 01X with the mlan auto connector
1.0.4 (latest intel MacBook Pro) ... and yeah all
faders jump around both ways ... displays perfect ...
transport controls respond both ways ... but I can't
get sound on my Yamaha headphone output or through
the Yamaha monitor out ! My speakers on the laptop
get disconnected (even get a no work sign when
pushing F4) ... so what am I doing wrong ? I must be
so close and spent a full day on this last bit ... In
the Yamaha manual ... I read something about output
cahnnel 17 and 18 ... but I am not really getting
this.
Can anybody send me perhaps an autoload song for the
Yamaha 01X ... Thanks a lot ... and greetings from
Brugge - Belgium.
QUAD G5, Dual G5x2.0, PB 17" 1.5GHz, Dual 23" Cinema Displays Mac OS X (10.4.7) mLAN networked 01X, i88x, Motif ES8 and ADA8000

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time?

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time

Alternatives to iPhoto's slideshow include:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

HT201209 Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

Get the redeem code from the KLove page:
http://www.klove.com/music/store.aspx
...and enter it into the Redeem Code box in the iTunes Store.
You will have to sign in to your iTunes account.
It worked fine here. If that doesn't work for you, let us know what went wrong.

I am having a painful problem with itunes 10, everytime I go into the itunes store to search for a song, even if I type one letter in it will instantly launch into search mode and doesn't stop, so I'm unable to find

I am having a painful problem with itunes 10, everytime I go everytime I go into the itunes store to search for a song, even if I type one letter Itunes will instantly launch into search mode and doesn't stop, so because I can never get past putting in the first letter or two, I'm unable to search and download any songs. I am on the latest Imac Intel core i7 Mac OS X, can anybody help?
Thankyou.
Beckyg.

Having this problem too: IT'S REALLY REALLY ANNOYING!!! Anyone have an idea how to sort this?

How do I stop i-tunes from changing the genres for my songs without my consent?

Lately, itunes has been taking the genres I've set for my songs and changing them without my consent or say so. I change them back to what I want, i-tunes changes it back to what it wants, etc..
For example, I might list something as "Rock", but i-tunes decides it's "Pop" or "Alternate Rock" and edits my file's meta-data unilaterally. I might decide I want a category called "Christmas Music", but i-tunes decides the genre is "Holiday Music". I even have a few songs labeled "Urban", and i-tunes tries to change them to "Hip-Hop/Rap" or "Rap/Hip-hope". I took a lot of time with my large music collection to get this stuff exactly the way I wanted it- simplified. I-tunes is screwing it up.
This is *my* music. I even bought it all legally on a limited budget. I get to decide what genre I want it listed as.
Is there a setting or something I can change to get i-tunes to stop messing my music genre data? Or do I have to find a new music player?
I've got a long suffering ipod classic I was thinking of replacing at some point, but I may leave the i-tunes ecosystem entirely over this instead. To make things worse, my ipod with it's troubled syncing and broken buttons now has to deal with constantly recopying files with new genres every time I sync and itunes or I have changed something in our constant man versus machine battle- just try have hundreds of songs recopied each time without an error on something that barely can handle normal syncing after reconnecting 10 times or so every sync because it doesn't take the first 9 times.
I don't want to fight my music player. I just want the thing to work and do what I instruct it to do. Either that or I'm going to have to rename it "HAL" and start calling myself "Dave" ala 2001: A Space Odessy. Because this thing seems to be turning on me.

Ugh. I thought I was exagerating when I said song name changes were next. Apparently, I was literally correct. I haven't seen it yet personally, but Tooltomus says he has.
I thought the genre changes had stopped, only to see that they'd started up again a few minutes ago. This is getting really old really fast.
Again, why does Apple seem to think it can do whatever it wants to our bought and paid for music without our permission? This isn't about interface changes or whatever, which are all well within their rights, but to actually alter our files themselves without asking or even notifying us. They've got to be kidding... Isn't there some way to turn this off?
Why are they doing this? What's the point of it? Is it intentional or some kind of bug? Is anyone from Apple going to bother to even tell us?
I feel like I had some great music software and a great music player. I've used them for hours every day for years. I really love smart playlists and a whole bunch of features. It's very upsetting to see them go in this direction.
You know, record companies and music sellers have been pushing the idea of legally purchased files for years, saying it's just the same as CDs or whatever. And I've been dutifully buying my files this whole time from various legal sellers instead of pirating them. And now they're basically doing the equivalent of breaking into my home and messing around with my CDs- scrobbling all over the covers and album booklets, etc..
Why even have a genre setting the user can change if the program is going to keep overriding it and change genres? Why even have a song setting the user can change if the program is going to keep overriding it and change song titles? What happens when the program gets something wrong?
Anyone know how to turn this off? Would going back to itunes 10 help or is this coming from the server to every version of itunes? Is there other music player software that will leave my music alone that will preserve my playcounts, ratings, playlists, last played, and so on and so forth, and support syncing to my ipod? Can I somehow cut itunes off from contacting apple's servers to look up information and make these changes?

Can i store my music on my device without using my data in my phone plan streaming from the cloud? How do i put what I want on there without waiting for each song to download from the cloud one at a time?

How can I store the music I listen to on my iphone without streaming it from the cloud and using all my data on my phone plans? How do I dump it on my phone all at once in itunes rather than waiting for each song to download individually from the cloud?

What?? You asked how to get all your music on your phone at once rather than downloading it to your phone from iCloud.
Go to your purchased list in iTunes and download all your music to your iTunes library, as explained in the linked article. Then sync it all to your phone using iTunes you're done. The music will be stored locally on your phone and you won't have to download it again in the future.

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

Inserts for autoload song or template

Similar Messages

Maybe you are looking for