Inspection report layout form default

Hello Gurus,
We had created the new form for out inspection report on qa32 and trying to default the new customized form in result printout screen but unable to do the same. Again and again I need ot select my variant to get my new form even I still use the username as a variant.
I tried with variants to default it but not working .Is there any config to default the new form ?
Akash

Hi
Read following may help you
You called up report RQGAAM31 to print out the inspection report. However, variant I_TYP_01 is not maintained in this report for inspection type 01.
For report RQGAAM31, you can set up the variants in such a way that they are automatically called up, regardless of the inspection type.
For example, variant 'I_TYP_01' stands for inspection type '01', variant 'I_TYP_05' for inspection type '05' etc.
When you maintain the variants for the inspection types, you can control which layout set is to be used, for example.
If the printout is not to come from report RQGAAM31, then you can activate the appropriate customer exit (enhancement QSS10001) and with this, call up another report.
Regards
Sujit

Similar Messages

  • Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

    Hallo,
    The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
    How to alter the report layout (xsl-fo) of an interactive report?
    Has someone any idea where to configure this?
    Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
    "If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
    http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
    How can the "default XSL-FO layout" be changed?
    Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
    "fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
    http://www.w3.org/TR/xsl/#fo_region-before
    The default report layout is not saved in:
    select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
    Thx, Willi

    I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
    1, Use an application process to set your custom layout for interactive reports:
    [ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
    [ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
    declare
    v_xsl varchar2(32767);
    begin
    v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
    <xsl:stylesheet version="2.0"
      <fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
      <fo:region-before region-name="region-header" extent="54.0pt"/>
    </xsl:stylesheet>';
    APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
    end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
    The code depends on the solution you are using to parse the xsl string.
    Hope this may help someone,
    Willi

  • Report layout - ME2N - Automatic background job

    HI all
    We are using the above report for Pending PO-RElease ie., dynamic selection - release indicator "B"  thru automatic background programme schedueld thru SM36 (after setting the variant) for the relevant/concerned users.
    The issue is, the report layout be default standard sap layout is taking, actually i have saved layout as PO no & date, but always, whenever background job is run, default sap report is taken in HTML.
    request kindly help how i can ensure my our report layout for backgrounds jobs thru ME2N or is there any other report which can give the pending PO-Release report for my requirement.
    thanks in advance
    regards
    srihari

    I am doing same as suggested by you for all other reports, but i am not successful with ME2N, because after having your own default layout, but for background it is default taking sap report. even i have tried to delete the sap - std report format but not allowed.
    if any one knows how to change the sap-default std report layout then also it's okay for us, as default report as 15 columns whereas we need only max 5 columns in report layout
    thanx in advance
    regards
    srihari

  • Use Report Layout Service

    Hi All:
    I want to change the default report layout for a delivery note. How can i do it?
    I use report layout service but i don´t know how to set my new report layout by default. Can you help me?
    thanks
    Ricardo

    ok thanks
    This solved my problem.
    But now i have a new question is possible print one document line many times. For example i have a delivery with 1 line and i have a numeric user field(value = 2) and i want to print the line 2 times (user´s field value). Is it possible?
    How can i do it??

  • Set As Default Crystal Report Layout in SAP B1 8.8 PL13

    Hi,
    I want to Set As Default a Crystal Report Layout. I know you can do that in Layout Desginer - Selection Criteria, but SAP B1 8.8 PL 13 has only a Manage Layout button in the Layout Desginer window which links to the Report and Layout Manager. There is no Set As Default button.
    Where can you select which layout to be default in PL13?
    Thanks!
    Cristina

    Hi
    If you want to Set as Default particular PLD then Open that Form
    For. Example
    Sales Ar > A/R Invocies (Item) document
    Then Click on PLD icon ans select your crystal report as Default by Set as Defaul button.
    Thanks
    King Kevin

  • View Crystal Report Layout for my UDO Form

    Hi all,
    I try to view a report created for my UDO form. I set all settings in Administration -> Setup -> General -> Report and Layout Manager. Now I wonder what should be assigned to  eventInfo.LayoutKey. I tried assigned report's DocCode from RDOC, DocEntry of my UDO object or UDO Code but nothing works. Always get an error: Incorrect format of argument or something like that - I didn't get an error in English so I tried to translate it.
    How to show a report layout for my UDO form?
    Regards
    Szymon Lipnicki

    Hi and thanks for Your reply.
    Help file contains example how to open report layout prepare in Crystla Reports designer for UDO form.
    //Add Layout Key Event Handler
    SBO_Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SBO_Application_LayoutKeyEvent);
    void SBO_Application_LayoutKeyEvent(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
        BubbleEvent = true;
        if (eventInfo.ReportTemplate == "A001" && eventInfo.ReportCode == "A001001")
            eventInfo.LayoutKey = 1; //Set the key of the layout
    I am using SAP 8.81.
    Regards
    Szymon

  • Error encountered during generation of default Crystal Report Layout

    Hi Experts,
    I am currently encountering an error on a particular workstation during generation of a default crystal report layout. Is there any SAP note for this or did someone encountered this error already?
    Details:
    SAP B1 8.81 PL:06 (I think its not a patch issue since the error is occurring on a particular workstation)
    Windows OS: Windows 7
    Actions Taken:
    Run CRRedist2005_x86
    Run CRNET11WIN_EN_200403
    Run crnet11win_en_sp1
    Run crnet11win_en_sp2
    Regards,
    Zeus

    Hi,
    Check SAP note regardless of version and PL.
    1529682 - Crystal report not displayed in Windows 7 OS
    1668274 - Print Draft with Crystal Layout
    Thanks & Regards,
    Nagarajan

  • Report Layout Can Applied as a default in Background ??

    Dear Friends,
    I have created an Variant for report layout  S_ALR_87012403 and set as default layout ....
    Foreground execution picked the defaulted layout but when am trying to execute the same report in back ground report layout is not picked properly whichever set as a default earlier...displayes as a standard
    Could you please suggest me how can i use same report layout for foreground as well as background
    Thanks in Advance
    Suresh Polineni

    Copy the program in Z and than modify it saving the list on memory on database table.

  • Report layout with User default and gobal default

    hi,
    any authorization to control report layout, only some user ID can use "user default" layout, and part of user available to set the layout as default
    thanks

    Is is a custom-developed ALV report or an SAP-supplied one?
    If if is custom-developed, you can register the following user-commands
    &AVE - Save layout
    &OL0 - Change layout
    &OAD - Select layout
    in parameter IT_EVENT_EXIT  of REUSE_ALV_LIST_DISPLAY.  When these user-commands are triggered, control passes to the user command routine in your callback program.  In the callback routine, you can implement authorization/security checks.
    Also look at parameters IS_VARIANT and I_SAVE to control use of variants.,
    If it is an SAP-supplied program, try using the auth-object mentioned in my earlier post.

  • Reports layout/format problem when called from forms

    hi,
    using forms and reports builder 10g OS winxp
    i have created web and paper layout report with pre-defined template gray (rdf). when i run the web layout there is no problem.
    when i call this report from form using
    web.show_document('http://machine:8889/reports/rwservlet?report=mail_report.rdf&destype=cache&desformat=HTML&userid=abc/xyz@dbname&para1='||:parameter1, '_blank');
    the layout (cell bgcolors of the table) does not appear.
    pl guide what am i missing out.
    thanks

    Hi,
    that has nothing to do with forms. Your call inside web.show_document is a servlet-call. With this you get the paper layout of a report. If you want to get the web-layout, you have to call the report with a jsp-call. In your case that might look like http://machine:8889/reports/mail_report.jsp?userid=.....
    If you store your report as jsp-file, you can use it for paper & web-layout, as rdf only paper-layout is possible.
    http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/pbr_arch.htm#i1005927
    http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/pbr_run.htm#g1022421
    Regards
    Rainer

  • Inspection report Form QM_INSP_RESULT -result printout Error ( 626109 / 201

    in QA32 Transaction when we are printing Inspection report in English
    langauge Form QM_INSP_RESULT -result printout there is an error
    "Text element does not exist" and it is giving ABAP dump
    I have Test all below steps - Log on SAP in DE  - works fine in DE
    Did anybody faced similar issue?

    Hi All,
    You can implement the exit  QSS10001 and call your Z smartform from there and then just set
    e_exit_activ = 'X' at the end(This will stop standard script ). This will work. Please let me know your further queries regarding this.
    Thank you.
    Message was edited by: Craig S

  • Issue with Customised Report Layout for Freezing Panes in a Tabular Form

    Hi,
    I am quite new to Oracle APEX. Any help would be great.
    When I create a Report Template in the Shared components of my application, I do not find it listed in the Report Templates when i navigate to the report regions of my application and so I am not able to choose the customized Template for my reports. I am customizing in order to get scrollable reports in my application, followed the steps provided in the Thread, http://kr.forums.oracle.com/forums/thread.jspa?threadID=2180543&start=0&tstart=0 .
    I am now listing the Steps in followed to create a Report Layout,
    Navigate to Shared components > Templates > Report
    Create From Scratch and paste the code as mentioned in the Thread.
    Apply changes and save it. But when i Navigate to a report in the Application I do not find this Listed.
    Thanks,
    Ramya

    Yes you can make a process that reads the apex_application.g_fnn arrays and insert your row manually but that's a lot of work.
    For what you're doing it doesn't sound like the standard CRUD processes should have a problem with it. On your button-click if it's doing a redirect and not some kind of submit, it's possible then that the value isn't making it into session state and therefore not getting included in the DML. Are you sure it's getting into session state?

  • How to create a report in Form line Style and can display Image field?

    Hi,
    In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
    I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
    But in Paper Layout, my report can not display Image field.
    I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
    How to create a report in Form line Style and can display Image field?
    I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
    Thanks & regards,
    BACH
    Message was edited by:
    bachnp

    Here you go..Just follow these steps blindly and you are done.
    1) Create a year prompt with presentation variable as pv_year
    2) Create a report say Mid report with year column selected 3 times
    - Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
    - Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
    - Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
    Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
    3) Create your main report with criteria as Year and Measure col
    - Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
    - Now put a filter on year column with Filter based on results of another request and select these:
    Relationship = greater than or equal to any
    Saved Request = Browse Mid Report
    Use values in Column = YEAR-1
    - Again,put a filter on year column with Filter based on results of another request and select these:
    Relationship = less than or equal to any
    Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
    Use values in Column = YEAR+1
    This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
    This will 100% work...
    http://i56.tinypic.com/wqosgw.jpg
    Cheers

  • How to link PDF document in Report Layout??

    I need to display the contents of PDF document after the form letter report. I tried OLE object but at the runtime it does not display the content. Does any one knows how to attach PDF document in reports layout?
    Thanks
    Ravindra

    you will have to concatinate your report output with the static PDF document. in reprots 10g you can create a cusotm destination that could implement this functionality.
    out of the box, reports does not provide the ability to add static content in PDF to reports' generated PDF output.
    thanks,
    philipp

  • Report Launch Form Error

    I have recently installed HeadStart 6i (see version info below).
    When I launch a report in the demo app (QMS0012F) and select
    the 'Options...' button I receive 'FRM-41052 Cannot find Window:
    invalid ID'. This is followed by the 'Report Launch Options'
    window but this appears to not work correctly (no lov buttons
    and all fields are blank even though they are setup in the
    Foundation app correctly). If I dont use the 'Options...' button
    the report runs correctly (if all the required report fields are
    defaulted in the Foundation app). Thanks, Keith
    Headstart Demo Application 6.5
    Application Library (hsdapp65) 6.5.0.4
    Oracle8i Enterprise Edition Release 8.1.7.1.1 - Production
    Oracle Forms Generator 6.5.40.4.0
    Headstart Template Package 6.5.1.0
    Template Form (qmstpl65) 6.5.0.6
    Object Library (qmsolb65) 6.5.1.4
    Event Handler Library (qmsevh65) 6.5.1.5
    Core Library (qmslib65) 6.5.1.12

    This is a duplicate posting, please disreguard

Maybe you are looking for