Report layout with User default and gobal default

hi,
any authorization to control report layout, only some user ID can use "user default" layout, and part of user available to set the layout as default
thanks

Is is a custom-developed ALV report or an SAP-supplied one?
If if is custom-developed, you can register the following user-commands
&AVE - Save layout
&OL0 - Change layout
&OAD - Select layout
in parameter IT_EVENT_EXIT of REUSE_ALV_LIST_DISPLAY. When these user-commands are triggered, control passes to the user command routine in your callback program. In the callback routine, you can implement authorization/security checks.
Also look at parameters IS_VARIANT and I_SAVE to control use of variants.,
If it is an SAP-supplied program, try using the auth-object mentioned in my earlier post.

Similar Messages

How do I create a crystal report layout with a table and borders

My crystal report is a signin sheet. The sign in sheet has an ID column, Name column, Institution column, Place to signin column, and Weekday columns with checkboxes in each column for the visitor to checkoff.
How do I display the data that is being used int he crystal report in a table layout with borders around each cell? And is it possible to center vertical alignment of the data within eacvh cell like Excel?

Blahahaha! Great answer Deb!
Seriously though... There is no vertical alignment in CR. There have been several past threads related to this issue and all of them have various workarounds. None of them are very elegant.
The best workaround I've found (especially if you are grid or borders) is to turn off the boarders for the field itself and drawl a rectangle around the field(s). Now you can place the field in the lower portion of the rectangle and adjust the rectangles height to place the field text in the center of the rectangle.
This will give you more control over the height of your elements than using a carriage return before the text.
Jason

User.region and the default locale

What is the difference between user.region, user.country and the default locale.
Thanks

Same problem here ! I called Apple Care and got two people during 2 hours on call, they were unable to explain why and just repeat that "the use of TVout for recording purpose are not supported by apple".
Why this settings has to be hidden ?
FYI : i'm able to capture Ipad 2 thru BMD Intensity Pro but not able to switch PAL and NTSC in TV OUT settings to get a correct input. TV OUT setting doesn't appear.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

COPA Report Layout with Object List (ALV)

Hi,
I have question about the COPA report layout with object list (ALV). Everytime I executed the report with ALV format, the amount for quantity column always shows with 3 decimal number, menwhile for amount column always follow by 2 decimal number.
Can anyone help me regarding this matter? I do not know how to turn off the decimal number to be 0 in this type of layout, although in the form itself I already put 0 decimal number.
Thanks.

Hi,
Better to raise this issue in CO Forum. You can expect some solution.
regards

Log on the other computer with user name and password

How to use labview to write a software to log on the other computer with user name and password?

Jimmyzeng wrote:
Nobody can help on this?
Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Difficult to achive the report layout with dynamic column names

I have a report layout as below.
So here the column names are dynamic.And each fixed row group has different calculations. I have a date parameter. If I select July 2013, then I need to show data from July 2012 to July 2013 with Columns(Jul-12, Aug-12...Jul-13). How to achive below layout
with dynamic columns?

Hi Sarayu_CM,
According to your description, you want to filter the records of prior year based on only one parameter selection. Right?
In this scenario, we can create two parameters. The first one is for user to select. The second parameter is based on the first parameter selection. We don't need to specify Available Values for the second parameter, but we should use expression to specify
Default Values based on the first parameter selection. Use the expression below:
=DateAdd("m",-12,FormatDateTime(Parameters!param1.Value))
Then we just need to apply a filter on the matrix/dataset to get the records which the date is between values in these two parameters.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report to see user type and roles assigned to users in EP?

Hi,
a) Is there any reporting mechanism in EP? Any specific report which throws up user types and roles assigned to the users? There is an option of 'Export' in the user management role but unfortunately it does not give information on User Type.
b) If the group is assigned a role, How can we see ( in any report) the roles assigned to a group? In the 'export' option of the 'User Management' this information does not come.

By default Portal UME comes along with the installation of portal.
Sometimes we may integrate external users using LDAP. At that time users come from ABAP stack or some active directories. But you can also create users in the portal UME. The purpose of using LDAP is to maintain the users centrally rather than creating again in portal.
You can check them in user administration->identity management and search for the users.
THere you can see some users will be from UME and some from LDAP.
User Admin tool is nothing but User Administration only.
Raghu

Locked PDF files will not open with user name and password. Help?

I go to school online and our eBooks are in pdf format. I download them to my MacBook so that I can read them offline. When I download them, they open as they always did but, when I put my username and password in to unlock them, it tells me something about the file is edited and a copy will be saved but, it never opens the file. I have adobe reader on it, I am getting frustrated! I don't want to be logged into class every time I am studying material. Any ideas? Thanks in advance - this is my first Mac so, bare with me

Not using netwok magic. I shut it down when it comes up. I have tried using 192.168.1.1 but still will not accept user name and password. I never changed the factory default and it just continues to ask for the user name and password. Web utility site will not come up. I have a wired desktop as my main computer and that is the computer I have been trying to access the utility from.

Matrix Report Fomating with Down group and Accross group list

Hello,
Does anyone know if there is way to ensure that the Down list of a Matix report finishes its list first instead of the Across list in layout. For example:
Pg1.
1 2 3 4
A
B
C
D
Pg2
5 6 7 8
A
B
C
D
Client wants to see
Pg1
1 2 3 4
A
B
C
D
Pg2
1 2 3 4
E
F
G
H
Thanks.
Ry

I had an inspiration while I was on the can of how you could get your desired solution. Assuming your columns are way too wide to get them all on one page, here's what you could do. You need to make two separate queries in your data model. One for columns 1 - 4 and one for columns 5 - 8. On your layout model you'll pretty much need to have two separate layouts, one for each query. Now if the report will only have one group value that it grabs each time it is run then you shouldn't have to add anything more. However, if you the user can select a range of values than you will need to alter your layout a little more. You will have to add a master repeating frame to contain both layouts with the item it groups on. Otherwise all pages containing columns 1 - 4 will print out for all item numbers before any pages will print out for column 5 - 8. Good luck.

Custom Report Layout with mutliple child tables

I am trying to create a custom report layout (using Bi Publisher) where I have parent data (multiple jobs on a page) and several child tables for each job (JobDays and JobStops) and several child tables for JobDays (JobDayProviders, JobDayCrew). On the apex screen, I have a join on Jobs and JobDays and I am using functions to string each child row value for JobDayProviders and JobDayCrew together and putting a <br> in between so that they will format on separate lines within a cell. It works fine on the screen but when trying to print to pdf, it ignores these line breaks. I have also tried using <br></br> (saw an article that said just use HTML in bi pulisher) which puts two lines in between each value on the screen and is still ignored on the pdf.
for example:
Table hierarchy:
Jobs table
Job Stops
Job Days
Job Day Service Providers
Job Day Crew
Report Layout per job (will have mutlipe jobs to print, just printing 1 day per job):
Jobs.col1 JobStops.row1 JobDay.col1 JobDayProviders.row1 JobDayCrew.r1
JobStops.row2 JobDayProviders.row2 JobDayCrew.r2
JobDayProviders.row3
Thanks,
Linda
First, is there a way to get bi publisher to recognize the line breaks? If not, what is the best way to create a custom report for this scenario? I tried to create a report query with mutliple queries, but cannot determine how to link the child queries to the paren query. I have seen an example where a button is pressed to print one parent row and the id of that row is saved and referenced as a parameter in each of the queries, but if printing mutliple parents on a report, how would I link the child queries to the parent query?

Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:

<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">

<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>

<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi

File, Send link doesn't open a new email. Using Firefox 11.0. Outlook 2010 is the Mailto default and W7 default email program. On the About:config page network.protocol-handler.external.mailto is set to regular font (not bold) "default Boolean true".

File, Send link doesn’t open a new email. Running Firefox 11.0. Outlook 2010 is the Mailto default and the W7 default email program. On the About:config page, network.protocol-handler.external.mailto is set to regular font (not bold) “default Boolean true”.

I assume you have tried toggling the setting in Firefox between Outlook and, say, Gmail:
orange Firefox button ''or'' classic Tools menu > Options > Applications
In the search box, type or paste '''mailto''' and pause for the list to filter.
Change the setting and OK to save it, then return to the dialog, change back, and OK again.
You also might want to toggle the setting at the OS level between Microsoft Outlook and the native Windows Mail client in a similar fashion. In Windows XP you could use IE's Options dialog, Programs tab, for this, but I'm not sure in Windows 7.
Since one possibility is a problem in your Firefox settings (including the possibility of interfering add-ons), and another is a problem at the Windows level (e.g., Registry settings), it would be useful to try to identify which one it is. One quick way to distinguish is to create a new Firefox profile. It will start up with all factory settings. You can switch back to your existing profile after testing.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
After closing Firefox, start up again in the Profile Manager as described in this article: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
With the new profile, can Firefox successfully create a message in Outlook?

Report layout with BIP

Hi All,
As I am a newbie,
Could any one help, how to create a report layout file with BI Publisher.?
Thanks in advance
bye
Srikavi

As far as I understood, if you have BI publisher there is an addon for word which you can install and then create your layout in word like every other document.
In this OBE it should be described:
http://www.oracle.com/technology/obe/11gr1_db/appdev/apexpdf/apexpdf.htm
Regards, Tine.

Generate a Report Dynamically without User Intervention and Output to XML

Here's the scenario for which I am trying to find a solution. Any help would be greatly appreciated.
I have a series of reports that the users generate from a UI by selecting the report, setting the values for a list of parameters, and then click a submit button. The report is generated in the UI for them to view. They can print it from here or export it to Excel.
They would like to be able to schedule a report to run daily without user intervention using a saved set of parameters. The system would run the report automatically and email it to a defined set of email addresses.
To do this, we need to have the report generated in a string or xml so a Java process can read it and email it.
I see that I can change a report's template to export:xml so I feel that it is possible. How can I export a report to XML without user intervention? Can the report template be changd dynamically at runtime? Ideally, I need some way to call this same report and have it output as a string data or xml to be used by a Java process that would store and generate the report for email.

Hi Kumar,
From Program1 you are calling Program2, using submit syntax (inside Program1).
While using submit, if you have correctly filled up the selection screen of program2, then it will AUTOMATICALLY get executed, WITHOUT F8.
If there is any compulsary field in program 2, which does not get populated, then it will not run automatically, or unless some special code is written in program2.
If you do not want the output of Program2 on screen, then u can use
SUBMIT Program2 AND RETURN.
In that case, no selection screen (of program2) will appear and neither the output of program 2.
Regards,
Amit Mittal.
Edited by: Amit Mittal on Dec 23, 2009 4:10 PM

Sales Report problem with 2LIS_11_VAHDR, 2LIS_11_VAITM and other DS

Hi Experts,
I need your help in following topic. I have a requirement to build a big (overall) sales report in BI (NW2004s).
I would like to use BI Content because I'm running out of time and try to use all preconfigured stuff if possible.
In the requirement a bunch of fields of different SD DataSources are used (mostly 2LIS_11_VAHDR and 2LIS_11_VAITM but also some fields of other Datasources).
In SE16 I know how to locate all the field in the tables VBAK, VBAP, KNA1, VBKD,
LIKP, VBRK and of course some texts. Some fields could already be located by me, others couldn't even be found in BI.
The difficulty I have is to bring all the DataSources together so that the data is displayed correct - even if there are redundant parts.
For example:
For sales orders the doc no, sales org, distr. channel (and a lot of other header data) should be displayed in each line together with item data such as item no., material code, quantity (and a lot of other item data). If an order has multiple items each item should be diplayed in one row in the report.
In the Query the report should look like a common table (e.g. as in an ALV Grid if you model a query with SQ01) --> a lot of columns.
I'm not sure if I should use one big DSO with multiple InfoSources or if I should create a MultiCube and add the BI DSOs 0SD_O03 (Orders) and 0SD_O01(Order Items).
I know this is a very common requirement in SD. Do you know how to combine the most common SD datasources that no issues come up?
Thank you very much in advance,
Horst
Message was edited by:
Horst Henkel

Hi Horst,
Reporting on ODS / DSo is slow. I'm here at a cleint where we have lots of reports on SD_O01 and SD_O03. The best way to have good query performance is to build cubes on top of your ODS. Build a sales cube on top of SD_O03 with all fields and a billing cube on top of SD_O01. Load the data from your ODS to your new cubes. Then create a multipovider on top of both cubes, identify the keyfigures and characteristics required for your queries. Build the queries on top of the multiprovider.
You can display all items of a bill in one row if you choose drill-across for the irems in the query, instead of drill-down. So it looks for a standard SD report.
Regards,
Juergen

Report layout with User default and gobal default

Similar Messages

Maybe you are looking for