Report Layout Can Applied as a default in Background ??

Dear Friends,
I have created an Variant for report layout S_ALR_87012403 and set as default layout ....
Foreground execution picked the defaulted layout but when am trying to execute the same report in back ground report layout is not picked properly whichever set as a default earlier...displayes as a standard
Could you please suggest me how can i use same report layout for foreground as well as background
Thanks in Advance
Suresh Polineni

Copy the program in Z and than modify it saving the list on memory on database table.

Similar Messages

Can i change the default gray background of the fw workarea?

can i change the default gray background color of the fw
workarea? thanks

On Tue, 2 Sep 2008 03:36:42 +0000 (UTC), "mediastream13"
<[email protected]> wrote:
>can i change the default gray background color of the fw
workarea? thanks
Didn't we do this earlier today?
It's not a Fireworks setting. It's a system-wide setting. You
have to
customize your workspace at the system level.
Win
Win Day
Wild Rose Websites www.wildrosewebsites.com
[email protected]

In report layout, can format a long string display as Column mode?

Hi,
Just want to check in report builder any way can format a long string into a column mode?
Example: I have a field to hold 8000 character, and would like to print
30 character in each line, when reach 50 line, then print in column i/o to print next page?
Any idea ? Thanks a lot if you can share your experience with me.
best Regards,
Klnghau

hi let say your field name is x
then if your want it word wrap then it's simple just get one field and make it's vertical
elasticity variable. and asign the field to it..
but if you want your field to be displayed as
first colunm and then beside continuation of that column but in 2nd one...
then create 2 formula columns make your field legth been distributed half in each.
so cf_1 is:
decalre
t varchar2(1510);
begin
if length(:x) > 1500
t := substr(x, 1, 1500); -- as 30 x 50 = 1500
else
t := :x;
end if;
return t;
so cf_2 is:
decalre
t varchar2(1510);
begin
if length(:x) > 1500
t := substr(x, 1500, length(:x)-1500); -- as 30 x 50 = 1500
else
t := '';
end if;
return t;
and then in design view
field1 field2
for field1 source is cf_1 and
for field2 source is cf_2
that's all
Enjoy Oracle...

Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, Willi

I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi

Set As Default Crystal Report Layout in SAP B1 8.8 PL13

Hi,
I want to Set As Default a Crystal Report Layout. I know you can do that in Layout Desginer - Selection Criteria, but SAP B1 8.8 PL 13 has only a Manage Layout button in the Layout Desginer window which links to the Report and Layout Manager. There is no Set As Default button.
Where can you select which layout to be default in PL13?
Thanks!
Cristina

Hi
If you want to Set as Default particular PLD then Open that Form
For. Example
Sales Ar > A/R Invocies (Item) document
Then Click on PLD icon ans select your crystal report as Default by Set as Defaul button.
Thanks
King Kevin

Can't see Report Layout in IE

Hi All,
When i am executing the report in report designer, the report is executing but cant see the layout of the report in IE . I can see all tools and options except report layout at portal and even i m not finding any error msg also. plz help in this regards.
Regards,
Kaushik

Hi Kaushik,
1) Are you facing the same problem with any other reports you format on report designer ?
What changes have you made to your report output?
Report Designer is a new feature of BI 7.0 and I know only the theory of it. You said you have checked with WAD..have you tried using this report which is having problem in WAD as 'Report Web item'?
There might be a setting that you need to do in report desginer or there is some additional installation to be done in order to support Report Designer (remember this is a new feature so even Basis or Protal teams are new to it!)
See these two items from help.sap,
4. Executing the Report
You execute the report in the portal (Web). The report is displayed in the standard Web template for reports. You can set the standard Web template for reports in Customizing for the standard Web templates at SAP NetWeaver ® Business Intelligence ® Reporting-Relevant Settings ®BEx Web ®Set Standard Web Templates ® Enterprise Report.
You can also create a print version of the report directly in the Report Designer. The report is converted into a PDF document, which you can then print.
5. Publishing the Report
You can publish reports in BI roles or as iViews in the portal.
You can also call the BEx Broadcaster from the Report Designer and broadcast reports. More information: Functions of the BEx Broadcaster
Also see this.
Use
When you display a report in the portal (Web), it is automatically embedded in the standard Web template for reports. The report is displayed in a table on the Web. In addition, a date in the upper area of the Web template indicates how current the data is. Using the standard pushbuttons provided, Information, Send, and Print Version, and the link Filter, you can access the most common functions for navigating in and further editing your report.
Integration
When you have created and saved a report in the Report Designer, choose (Execute): The report is displayed automatically in the portal using the standard Web template for reports.
From a technical perspective, the standard Web template for reports is based on the 0REPORT_DEFAULT_TEMPLATE Web template. This Web template is set as the default for displaying reports from the Report Designer in the SAP Customizing Implementation Guide under SAP NetWeaver ® Business Intelligence ® Reporting-Relevant Settings ® BEx Web ® Set Standard Web Templates ® Enterprise Report. The standard Web template contains three pushbuttons, Information, Send and Print Version, and the link Filter to call the filter pane.
You can copy this Web template to make changes and set it as your new standard Web template for reports in the IMG. Note that to activate the changes in the SAP Reference IMG, you must start the J2EE Engine.
Here is the link.
http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Do keep us updated on the progress of this issue.
All the best!
Regards
Sudeepti

Report layout with User default and gobal default

hi,
any authorization to control report layout, only some user ID can use "user default" layout, and part of user available to set the layout as default
thanks

Is is a custom-developed ALV report or an SAP-supplied one?
If if is custom-developed, you can register the following user-commands
&AVE - Save layout
&OL0 - Change layout
&OAD - Select layout
in parameter IT_EVENT_EXIT of REUSE_ALV_LIST_DISPLAY. When these user-commands are triggered, control passes to the user command routine in your callback program. In the callback routine, you can implement authorization/security checks.
Also look at parameters IS_VARIANT and I_SAVE to control use of variants.,
If it is an SAP-supplied program, try using the auth-object mentioned in my earlier post.

Inspection report layout form default

Hello Gurus,
We had created the new form for out inspection report on qa32 and trying to default the new customized form in result printout screen but unable to do the same. Again and again I need ot select my variant to get my new form even I still use the username as a variant.
I tried with variants to default it but not working .Is there any config to default the new form ?
Akash

Hi
Read following may help you
You called up report RQGAAM31 to print out the inspection report. However, variant I_TYP_01 is not maintained in this report for inspection type 01.
For report RQGAAM31, you can set up the variants in such a way that they are automatically called up, regardless of the inspection type.
For example, variant 'I_TYP_01' stands for inspection type '01', variant 'I_TYP_05' for inspection type '05' etc.
When you maintain the variants for the inspection types, you can control which layout set is to be used, for example.
If the printout is not to come from report RQGAAM31, then you can activate the appropriate customer exit (enhancement QSS10001) and with this, call up another report.
Regards
Sujit

Error encountered during generation of default Crystal Report Layout

Hi Experts,
I am currently encountering an error on a particular workstation during generation of a default crystal report layout. Is there any SAP note for this or did someone encountered this error already?
Details:
SAP B1 8.81 PL:06 (I think its not a patch issue since the error is occurring on a particular workstation)
Windows OS: Windows 7
Actions Taken:
Run CRRedist2005_x86
Run CRNET11WIN_EN_200403
Run crnet11win_en_sp1
Run crnet11win_en_sp2
Regards,
Zeus

Hi,
Check SAP note regardless of version and PL.
1529682 - Crystal report not displayed in Windows 7 OS
1668274 - Print Draft with Crystal Layout
Thanks & Regards,
Nagarajan

Create Report Layout (Apex 3.2) - How can I set the substitution variables?

Hi,
I created a "Report Query" under "Shared Components". I now want to work on the corresponding "report layout". I created a "Generic Columns (XSL-FO)". I read the following in the documentation:
The following are valid substitution strings:
#PAGE_HEADER#
#PAGE_HEADERFONT_COLOR#
#PAGE_HEADER_FONT_FAMILY#
#PAGE_HEADER_FONT_SIZE#
#PAGE_HEADER_FONT_WEIGHT#
#PAGE_FOOTER#
#PAGE_FOOTER_FONT_COLOR#
#PAGE_FOOTER_FONT_FAMILY#
#PAGE_FOOTER_FONT_SIZE#
#PAGE_FOOTER_FONT_WEIGHT#
#PAGE_WIDTH#
#PAGE_HEIGHT#
#HEADER_BG_COLOR#
#HEADER_FONT_COLOR#
#HEADER_FONT_FAMILY#
#HEADER_FONT_SIZE#
#HEADER_FONT_WEIGHT#
#BODY_BG_COLOR#
#BODY_FONT_COLOR#
#BODY_FONT_FAMILY#
#BODY_FONT_SIZE#
#BODY_FONT_WEIGHT#
#BORDER_WIDTH#
Where can I set the values for these substitution variables in my "Report Layout"? Could someone give an example? I can't seem to find documentation on this.
Thanks!
Francois

Thanks for the tip however I'm not trying to do this through the print tab, I'm calling the report using the following get_print_document in pl/sql code:
l_report_blob := apex_util.get_print_document(
p_application_id => l_application_id,
p_report_layout_name => l_report,
p_report_query_name => l_report,
p_report_layout_type => l_output_format,
p_document_format => l_output_format,
p_print_server => null);
Where could I set these substitution variables ? I'm simply calling a report query and layout created under Shared Components.
Thanks
Francois

Custom report layout question...can't find any answers anywhere

I am trying to build a report in Portal, using the custom report layout. The report displays like so, before I do any customization:
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
where COLUMN1 is the same value, always per report; COLUMN2 and COLUMN3 vary.
What I want is:
COLUMN1
COLUMN2 COLUMN3
COLUMN2 COLUMN3
COLUMN2 COLUMN3
COLUMN2 COLUMN3
In the report layout editor, Body section, this is what I see:
<TD ALIGN="LEFT"><#COLUMN1.FIELD#></TD>
<TD ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
so #COLUMN1.FIELD# must be some kind of array, but I am not finding any documentation anywhere on how to reference the individual values. All I need is the very first value of the COLUMN1 variable. Once I have that value, I can put it where I need it, but I can't get at that value, just the array.
I have searched portal center, the app server documentation, html documentation. I have googled everything I could think of, but came up with nothing. I found a similar question on this forum, but no one responded with an answer. Any help would be greatly appreciated.

Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:

<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">

<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>

<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi

How can I print document, based on user define template (Report Layout)?

I want to be able to choose report layout, and print a document based on it. Can I implement it in my SDK code?

Hi Shrem,
I don't think this is possible with SDK code and PLD. You can do this if you're using a standard Crystal Report layout and you just send code to it using your code. Otherwise you can try and do this with user reports and queries in SBO itself without the SDK. But you're going to have to make all your layouts with more or less the same query and have where statements that limits the rows that shows on the report.
Hope it helps,
Adele

Can I set a default to effect settings? Or apply the same effect settings to multiple clips?

If I want to set multiple clips to have the same effect, can I do that without resetting the effects every time I add it?
Or can I set a default setting to an effect that is different from the default default?

ATalkingFish wrote:
Can you elaborate on how to use copy/paste attributes with effects?
the Manual says :
http://help.apple.com/finalcutpro/mac/10.0.6/#ver3029fc422

Difficult to achive the report layout with dynamic column names

I have a report layout as below.
So here the column names are dynamic.And each fixed row group has different calculations. I have a date parameter. If I select July 2013, then I need to show data from July 2012 to July 2013 with Columns(Jul-12, Aug-12...Jul-13). How to achive below layout
with dynamic columns?

Hi Sarayu_CM,
According to your description, you want to filter the records of prior year based on only one parameter selection. Right?
In this scenario, we can create two parameters. The first one is for user to select. The second parameter is based on the first parameter selection. We don't need to specify Available Values for the second parameter, but we should use expression to specify
Default Values based on the first parameter selection. Use the expression below:
=DateAdd("m",-12,FormatDateTime(Parameters!param1.Value))
Then we just need to apply a filter on the matrix/dataset to get the records which the date is between values in these two parameters.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Customizing Reports Layout

Hi All,
I need to find a way to customize the layout of our reports. But not modifying the default layout for all the users. Just for specific reports for an specific client (kind of Report Template)
is it possible to do that? Can anyone help me of give me a clue to do this?.
Thank you all, I'm investigating and all I found was different ways to modify layouts but for the entire OBIEE application.
Regards,
Belen

Hi,
Use section level security.(Section properties->permissions)
Consider Group A and B. A wants reports with different layout and B wants reports with default view.Lets consider a report R.Place report R with different layout in Section 1 and report R with default view in Section 2. Now apply security to sections. For Section 1 give access for Group A and no access for Group B.Now for Section 2 give access to Group B and no access to Group A.
Hope this solves your issue.
Regards,
Srikanth
http://bintelligencegroup.wordpress.com/

Report Layout Can Applied as a default in Background ??

Similar Messages

Maybe you are looking for