Install and uninstall deployments at the same time?
Hi all,
I've a question about the behavior, if there is an install and an uninstall deployment at the same time?
Background:
I've a device collection called "Default Client" wich deploys all our default software for installation and all special software for uninstallation. For each special software, there is a device collection with an install deployment for it. Now I can
add machines to this "special software device collections" to install the software and after removing them from the collection, they uninstall the software.
In my tests on two clients this worked perfect. But can I assume that this works every time or could this behavior be serendipity because of these two competing deployments?
Regards,
Rigger
I'm assuming the membership of the uninstall collections is dynamic and based on the fact that the client are not members of the "Default Client" collection correct so that when a resource is removed from the "Default Client" collection
it is automatically added to these other uninstall collections?
If so, then yes, the uninstall is happening because of this.
If not, then what you've seen is a coincidence because Applications will not be automatically removed just because the Install deployment is no longer applicable to a system.
Jason | http://blog.configmgrftw.com | @jasonsandys
Similar Messages
-
Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.
Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile -
Bash script: Rotate your wallpaper and SLiM theme at the same time
EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.
-
10.3 and 8.1 at the same time
I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far.
I have:
installed 10.3 in a new directory, C:\bea103
I'm running 8.1 in the default C:\bea
changed the point base ports in 8.1
changed the http/https ports in 8.1 to 8001/8002
any ideas on what else I should do?
I can start on or the other. When 10.3 is running 8.1 outputs the following to the console (Class paths have been chopped for length and the start command edited for legibility):
JAVA Memory arguments: -Xms96m -Xmx256m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Starting WLS with line:
C:\bea\JROCKI~1\bin\java
-jrockit
-Xdebug
-Xnoagent
-Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
-Djava.compiler=NONE
-Xms96m
-Xmx256m
-Xverify:none
-ea
-da:com.bea...
-da:javelin...
-da:weblogic...
-Dplatform.home=C:\bea\WEBLOG~1
-Dwls.home=C:\bea\WEBLOG~1\server
-Dwli.home=C:\bea\WEBLOG~1\integration
-Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml
-Dweblogic.management.discover=true
-Dweblogic.ProductionModeEnabled=
-Dejbruntime.database=pointbase44
-Dweblogic.security.SSL.ignoreHostnameVerify=false
-Dwlw.iterativeDev=true
-Dwlw.testConsole=true
-Dwlw.logErrorsToConsole=true
-Dweblogic.Name=portalServer
-Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Stopping the Weblogic Workshop debugger...
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
Here is the console output when 8.1 is running and I try and start 10.3 (edited as above):
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=512m -XX:MaxPermSize=160m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java
-client
-Xdebug
-Xnoagent
-Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
-Djava.compiler=NONE
-Xms512m
-Xmx1024m
-XX:CompileThreshold=8000
-XX:PermSize=256m
-XX:MaxPermSize=512m
-XX:MaxPermSize=160m
-XX:MaxPermSize=192m
-Xverify:none
-da:org.apache.xmlbeans...
-ea
-da:com.bea...
-da:javelin...
-da:weblogic...
-ea:com.bea.wli...
-ea:com.bea.broker...
-ea:com.bea.sbconsole...
-Dplatform.home=C:\bea103\WLSERV~1.3
-Dwls.home=C:\bea103\WLSERV~1.3\server
-Dweblogic.home=C:\bea103\WLSERV~1.3\server
-Xmx1024m
-Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
-Daldsp.home=C:\bea103\odsi_10.3
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
-Dweblogic.wsee.bind.suppressDeployErrorMessage=true
-Dweblogic.wsee.skip.async.response=true
-Dwcb.properties.url="file:///c|/bea103/user_projects/domains/WCB_Developer_Domain/app
-parms/"
-Dlog4j.configuration=file:C:\bea103\USER_P~1\domains\WCB_DE~1\apacheLog4jCfg.xml
-Dweblogic.management.discover=true
-Dwlw.iterativeDev=true
-Dwlw.testConsole=true
-Dwlw.logErrorsToConsole=true
-Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wli1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\patch_alsb1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_aldsp1030\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light
-portal\lib\system;C:\bea103\wlportal_10.3\light
-portal\lib\system;C:\bea103\wlportal_10.3\light
-portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info
-mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info
-mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content
-mgmt\lib\system
-Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security
-Dweblogic.Name=AdminServer
-Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Stopping PointBase server...
PointBase server stopped.
\Windows was unexpected at this time.
So I'm stuck, can any one point me to some documentation or anything at all to get me moving forward on this?
Thanks
JohnHi
Did you change this 8453 to someother value for one of the domains. This looks like a Pointbase DB Debug Port. First change main pointbase db port and then change this debug port value also in setDomainEnv.cmd file.
HTH
Ravi Jegga -
How can I connect to Oracle and SQL server at the same time?
I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH -
My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
HP Pavilion dv2000 headphones and speaker playing at the same time
Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating systemHP Pavilion dv2000 headphones and speaker playing at the same time
germanok wrote:
Good Day HP
Sir/Ma'am,
I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
And please forgive me for my bad english..
Here are the system properties of my laptop.
Windows 7 Professional Service Pack 1
Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Installed Memory (RAM) : 1.00 GB
System Type: 64-bit operating system -
Connecting Micro USB and HDMI cables at the same time
I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network. I'm using Apple Configurator to do this. Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time. Does anyone have a worrkaround to resolving this issue?
I saw a similar post about this problem in the forums dating back to April 2013 with no real solution. It's been over a year now and I'm hoping someone has found a workaround to this problem. I have a bunch of ATVs that I need to configure for our classrooms.
Thanks!
MGFor what reason do you believe this is necessary?
How to Install a Configuration Profile: http://support.apple.com/kb/ht5437 -
Running windows and OS 10 at the same time.
I am going to order a new iMac. I want to be able to have windows and Mac running at the same time. I will be using two monitors. My question is would I be better to order more ram, or the fastest processor to optimize the performance? My brother has a mac book pro running parallels, he says that it works or but is quite slow. Any help before I order my new iMac would be appreciated.
More RAM would speed things up more when handeling multiple applications at the same time.
(Borrowed from Kappy)
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. -
L2 OOB and L3 OOB at the same time
Can you run L2 OOB and L3 OOB at the same time?
I have a core 6509 and it is trunked to access layer switches â 4506 and 2960sâ.
The problem is that I am installing a 3845 routerâ off the 6509â to act as a hub for crypto tunnels. The spokes will be 2821 routers with 2960 switch on its own subnet that requires routing not L2.
Could someone provide a good example of configuration? Most confused with the CAS.
In the above need do I have E0 and E1 in different VLANS with different IP's.
Using a 10.x.x.x /24 private address network.Yes you can run layer 2 and layer 3 in other words client adjacency is 0 hops from cas in respect to the 6509 and multi hops in respect to the 2960 switches at the remotes.
Unfortunately its not as simple as providing you a working config getting this set up is usually a 1 week process for most cisco partners. -
How do I make Organizer and Editor open at the same time?
I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
KCreate Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
How do I do a split screen to show the contents of my Library and a playlist at the same time?
I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?See this thread -> https://discussions.apple.com/thread/5666364
-
Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?
Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Maybe you are looking for
-
IPad iTunes app: download error. Tap to retry
All song or movies download faces similar problem, cannot download with my iPad mini at all, with the most updated iOS. Not connection or memory problem. Took forever for apple customer support to answer me. Searched on my it seems this problem is fa
-
How to deactivate one of our computers that has been destroyed by a tornado.
I have one computer that I have the cloud on and works fine but my other computer got sucked up by the tornado. How do I deativate a computer I don't have in order to put it on a new one.
-
Can I load a configuration file in MAX 3.1.1 programmaticaly?
Hi, I stored a lot of configuration files for all the different projects we used. How can I load theese files programmaticaly from LabVIEW or from TestStand? Thank you in advance. C. Dietz Test Engineering digades GmbH www.digades.com
-
WRT54G keeps restarting with Windows 7
Hi guys,, i realy need some help here,, i'm using laptop with Win 7 Home Premium + WRT54G ver 7. Every time i connect my laptop via LAN or wireless network, the WRT54G ver 7 keeps restarting by it self. I try to used another laptop with win xp and it
-
Does BC4J works as ORM (eg: Toplink) to support for MSQL Server / Oracle DB
Hi, My current product is running on Struts 1.1, Apache Cocoon(for reports generation), JDBC & MS SQL Server environment. To provide the more flexibility & user friendliness to the application I have a proposal for the re-development of the applicati